Daftar Standar ANSI IBR

Daftar Standar ANSI IBR adalah kumpulan judul standar gratis dari organisasi pengembangan standar di Portal ANSI IBR untuk dibaca secara online.

Definisi ANSI IBR

Artikel ini merupakan lanjutan dari artikel sebelumnya dari standarku.com mengenai Portal ANSI IBR berikut :

ANSI IBR merupakan akronim dari : American National Standards Institute (ANSI) Incorporated by Reference (IBR).

Portal ANSI IBR adalah situs yang dibuat ANSI untuk menyediakan standar-standar gratis dari organisasi pengembangan standar untuk dibaca secara online.

ANSI (American National Standards Institute) adalah organisasi nirlaba swasta yang mengawasi pengembangan standar yang disetujui secara sukarela untuk produk, layanan, proses, sistem, dan personel di Amerika Serikat.

ANSI mengawasi pengembangan standar untuk produk, layanan, proses, sistem, dan personel di Amerika Serikat.

Organisasi ini juga melakukan koordinasi antara standar Amerika Serikat dengan standar internasional lain sehingga produk Amerika dapat digunakan di seluruh dunia.

Daftar Standar ANSI IBR

Daftar ini berisi judul standar-standar IBR dalam Code of Federal Regulations (CFR) yang dibuat oleh SDO.

SDO adalah organisasi pengembangan standar atau pembuat standar-standar atau standards developing organizations (SDO).

Standar dari semua pengembang yang diwakili pada portal ANSI IBR, terdiri dari 2 bagian yaitu Standar IBR disediakan oleh ANSI dan yang disediakan oleh masing-masing SDO.

Artikel ini akan menampilkan daftar Standar IBR yang disediakan oleh ANSI, yaitu dari SDO berikut :

  • IEC, ISO, AHAM, AMCA, ASA, AWS, HFES, IES, ISA, NACE, NEMA.

Cara akses Standar ANSI IBR

Standar-standar tersebut dapat dibuka secara gratis, kami sertakan link lokasi pada setiap daftar standar yang ditampilkan.

Pembaca bisa klik tombol “” untuk mengakses read-only copy (salinan baca-saja) dari masing-masing standar yang direferensikan.

Perhatikan bahwa pembaca harus menginstal Plug-In FileOpen sebelum dapat mengakses standar tersebut.

Daftar Standar ANSI IBR dari IEC

Berikut ini adalah standar IEC IBR yang tersedia :

  • CISPR 22 Ed. 3.0 b:1997 Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement
  • IEC 1097-1:1992 Global Maritime Distress and Safety System (GMDSS)–Part 1: Radar transponder–Marine Search and Rescue (SART)–Operational and Performance Requirements, Methods of Testing and Required Test Results
  • IEC 1097-3:1994 Global Maritime Distress and Safety System (GMDSS)–Part 3: Digital Selective Calling (DSC) Equipment–Operational and Performance Requirements, Methods of Testing and Required Testing Results
  • IEC 179:1973 Precision Sound Level Meters
  • IEC 309-1:1979 Plugs, Socket-Outlets and Couplers for Industrial Purposes: Part 1, General Requirements
  • IEC 309-2:1981 Plugs, Socket-Outlets and Couplers for Industrial Purposes: Part 2, Dimensional Interchangeability Requirements for Pin and Contact-tube Accessories
  • IEC 331:1970 Fire Resisting Characteristics of Electrical Cables
  • IEC 332-1:1993 Test on Electric Cables Under Fire Conditions, Part 1: Test on a Single Vertical Insulated Wire or Cable
  • IEC 332-3:1992  Test on Electric Cables Under Fire Conditions, Part 3: Test on Bunched Wires or Cables
  • IEC 363:1972 Short-Circuit Current Evaluation with Special Regard to Rated Short-Circuit Capacity of Circuit-Breakers in Installations in Ships
  • IEC 533:1977 Electromagnetic Compatibility of Electrical and Electronic Installations in Ships
  • IEC 56:1987 High-Voltage Alternating-Current Circuit-Breakers
  • IEC 60034-1:1996 Rotating electrical machines – Part 1: Rating and performance
  • IEC 60034-12:1980 Rotating electrical machines – Part 12: Starting performance of single-speed three-phase cage induction motors for voltages up to and including 660 V
  • IEC 60050-411 Ed. 2.0 b:1996 IEV Chapter 411: Rotating machinery
  • IEC 60072-1 Ed. 6.0 b:1991 Dimensions and output series for rotating electrical machines – Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080
  • IEC 60092-101 Ed. 4.1 b:2002 Electrical installations in ships – Part 101: Definitions and general requirements
  • IEC 60092-201 Ed. 4.0 b:1994 Electrical installations in ships – Part 201: System design – General
  • IEC 60092-202 Ed. 4.0 b:1994 Electrical installations in ships – Partie 202: System design – Protection
  • IEC 60092-304 Ed. 3.0 b:1980 Electrical installations in ships. Part 304: Equipment – Semiconductor convertors
  • IEC 60529 Ed. 2.0 b:1989 Degrees of protection provided by enclosures (IP Code)
  • IEC 60533 Ed. 2.0 en:1999 Electrical and electronic installations in ships – Electromagnetic compatibility
  • IEC 60945 Ed. 4.0 b:2002 Maritime navigation and radiocommunication equipment and systems – General requirements – Methods of testing and required test results
  • IEC 61097-10 Ed. 1.0 en:1999 Global maritime distress and safety system (GMDSS) – Part 10: Inmarsat-B ship earth station equipment – Operational and performance requirements, methods of testing and required test results
  • IEC 61097-12 Ed. 1.0 en:1996 Global maritime distress and safety system (GMDSS) – Part 12: Survival craft portable two-way VHF radiotelephone apparatus – Operational and performance requirements, methods of testing and required test results
  • IEC 61097-13 Ed. 1.0 en:2003 Global maritime distress and safety system (GMDSS) – Part 13: Inmarsat F77 ship earth station equipment – Operational and performance requirements, methods of testing and required test results
  • IEC 61097-4 Ed. 1.0 b:1994 Global maritime distress and safety system (GMDSS) – Part 4: INMARSAT-C ship earth station and INMARSAT enhanced group call (EGC) equipment – Operational and performance requirements, methods of testing and required test results
  • IEC 61097-5 Ed. 1.0 en:1997 Global maritime distress and safety system (GMDSS) – Part 5: Inmarsat-E – Emergency position indicating radio beacon (EPIRB) operating through the Inmarsat system – Operational and performance requirements, methods of testing and required test results
  • IEC 61097-6 Ed. 1.0 b:1995 Global maritime distress and safety system (GMDSS) – Part 6: Narrowband direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships (NAVTEX) – Operational and performance requirements, methods of testing and required test results
  • IEC 61097-7 Ed. 1.0 b:1996 Global maritime distress and safety system (GMDSS) – Part 7: Shipborne VHF radiotelephone transmitter and receiver – Operational and performance requirements, methods of testing and required test results
  • IEC 61097-8 Ed. 1.0 en:1998 Global maritime distress and safety system (GMDSS) – Part 8: Shipborne watchkeeping receivers for the reception of digital selective calling (DSC) in the maritime MF, MF/HF and VHF bands – Operational and performance requirements, methods of testing and required test results
  • IEC 61097-9 Ed. 1.0 en:1997 Global maritime distress and safety system (GMDSS) – Part 9: Shipborne transmitters and receivers for use in the MF and HF bands suitable for telephony, digital selective calling (DSC) and narrow band direct printing (NBDP) – Operational and performance requirements, methods of testing and required test results
  • IEC 61162-1 Ed. 2.0 en:2000 Maritime navigation and radiocommunication equipment and systems – Digital interfaces – Part 1: Single talker and multiple listeners
  • IEC 61993-2 Ed. 1.0 en:2001 Maritime navigation and radiocommunication equipment and systems – Automatic identification systems (AIS) – Part 2: Class A shipborne equipment of the universal automatic identification system (AIS) – Operational and performance requirements, methods of test and required test results
  • IEC 62287-1 Ed. 1.0 en:2006 Maritime navigation and radiocommunication equipment and systems – Class B shipborne equipment of the automatic identification system (AIS) – Part 1: Carrier-sense time division multiple access (CSTDMA) techniques
  • IEC 62301 Ed. 1.0 b:2005 Household electrical appliances – Measurement of standby power
  • IEC 68-2-52:1984 Basic Environmental Testing Procedures, Part 2: Tests. Test KB: Salt Mist, Cyclic (Sodium Chloride Solution)
  • IEC 705:1988 Methods for Measuring the Performance of Microwave Ovens for Household and Similar Purposes
  • IEC 79-0:1983 Electrical apparatus for explosive gas atmospheres. Part 0: General requirements
  • IEC 79-11(Ia):1991 Electrical apparatus for explosive gas atmospheres – Part 11: Intrinsic safety
  • IEC 79-15:1987 Electrical apparatus for explosive gas atmospheres. Part 15: Electrical apparatus with type of protection ‘n’
  • IEC 79-18:1992 Electrical apparatus for explosive gas atmospheres – Part 18: Encapsulation ‘m’
  • IEC 79-2:1983 Electrical apparatus for explosive gas atmospheres. Part 2: Electrical apparatus, type of protection ‘p’
  • IEC 79-5:1967 Electrical apparatus for explosive gas atmospheres. Part 5: Sand-filled apparatus
  • IEC 79-6:1995 Electrical apparatus for explosive gas atmospheres – Part 6: Oil-immersion ‘o’
  • IEC 92-3:1965 Electrical installations in ships – Part 3: Cables (construction, testing and installations)
  • IEC 92-301:1980 Electrical installations in ships. Part 301: Equipment – Generators and motors
  • IEC 92-302:1980 Electrical installations in ships – Part 302: Low-voltage switchgear and controlgear assemblies
  • IEC 92-303:1980 Electrical installations in ships. Part 303: Equipment – Transformers for power and lighting
  • IEC 92-306:1980 Electrical installations in ships. Part 306: Equipment – Luminaires and accessories
  • IEC 92-350:1988 Electrical installations in ships. Part 350: Low-voltage shipboard power cables – General construction and test requirements
  • IEC 92-352:1979 Electrical installations in ships. Choice and installation of cables for low-voltage power systems.
  • IEC 92-353:1995 Electrical installations in ships – Part 353: Single and multicore cables with extruded solid insulation for rated voltages 0.6/1 kV
  • IEC 92-502:1994 Electrical installations in ships – Part 502: Tankers – Special features
  • IEC 92-503:1975 Electrical installations in ships – Part 503: Special features – AC supply systems with voltages in the range of above 1 kV up to and including 15 kV
  • IEC 947-2:1989 Low-Voltage Switchgear and Control Gear, Part 2
  • IEC/PAS 61162-100 Ed. 1.0 en:2002 Maritime navigation and radiocommunication equipment and systems – Digital interfaces – Part 100: Single talker and multiple listeners – Extra requirements to IEC 61162-1 for the UAIS
  • IEC/PAS 62282-6-1 Ed. 1.0 en:2006 Fuel cell technologies – Part 6-1: Micro fuel cell power systems – Safety

Standar dari IEC IBR tersebut dapat diakses pada :

Daftar Standar ANSI IBR dari ISO

Berikut ini adalah standar ISO IBR yang tersedia :

  • ISO 10297:1999 Gas cylinders — Refillable gas cylinder valves — Specification and type testing
  • ISO 10307-1:1993 Petroleum products – Total sediment in residual fuel oils – Part 1: Determination by hot filtration
  • ISO 10370/Cor1:1996 Petroleum products — Determination of carbon residue — Micro method – Corrigendum
  • ISO 10461:2005 Gas cylinders – Seamless aluminium-alloy gas cylinders – Periodic inspection and testing
  • ISO 10462:2005 Gas cylinders – Transportable cylinders for dissolved acetylene – Periodic inspection and maintenance
  • ISO 10478:1994 Petroleum products – Determination of aluminium and silicon in fuel oils – Inductively coupled plasma emission and atomic absorption spectroscopy methods
  • ISO 10865-1:2012 Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers – Part 1: Systems for rearward-facing wheelchair-seated passengers
  • ISO 11114-1:1997 Transportable gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 1: Metallic materials
  • ISO 11114-2:2000 Transportable gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 2: Non-metallic materials
  • ISO 11117:1998 Gas cylinders — Valve protection caps and valve guards for industrial and medical gas cylinders — Design, construction and tests
  • ISO 11118:1999 Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods
  • ISO 11119-1:2002 Gas cylinders of composite construction – Specification and test methods – Part 1: Hoop wrapped composite gas cylinders
  • ISO 11119-3:2002 Gas cylinders of composite construction – Specification and test methods – Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners
  • ISO 11120:1999 Gas cylinders — Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l — Design construction and testing
  • ISO 11621:1997 Gas cylinders — Procedures for change of gas service
  • ISO 11623:2002 Transportable gas cylinders – Periodic inspection and testing of composite gas cylinders
  • ISO 11734:1995 Water quality – Evaluation of the ultimate anaerobic biodegradability of organic compounds in digested sludge – Method by measurement of the biogas production
  • ISO 12185:1996 Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method
  • ISO 13256-1:1998 Water-source heat pumps — Testing and rating for performance — Part 1: Water-to-air and brine-to-air heat pumps
  • ISO 13485:2016 Medical devices – Quality management systems – Requirements for regulatory purposes
  • ISO 13837:2008
  • Road vehicles – Safety glazing materials – Method for the determination of solar transmittance
  • ISO 14230-4:2000
  • Road vehicles — Diagnostic systems — Keyword Protocol 2000 — Part 4: Requirements for emission-related systems
  • ISO 14596:2007 Petroleum products – Determination of sulfur content – Wavelength-dispersive X-ray fluorescence spectrometry
  • ISO 14597:1997 Petroleum products — Determination of vanadium and nickel content — Wavelength-dispersive X-ray fluorescence spectrometry
  • ISO 14644-1:1999 Cleanrooms and associated controlled environments — Part 1: Classification of air cleanliness
  • ISO 3807-2:2000 Cylinders for acetylene – Basic requirements – Part 2: Cylinders with fusible plugs
  • ISO 1496-1:1990 Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes
  • ISO 1496-3:1995 Series 1 freight containers — Specification and testing — Part 3: Tank containers for liquids, gases and pressurized dry bulk
  • ISO 15489-1:2001 Information and documentation – Records management – Part 1: General
  • ISO 15540:1999 Ships and marine technology — Fire resistance of hose assemblies — Test methods
  • ISO 15765-4:2005 Road vehicles – Diagnostics on Controller Area Networks (CAN) – Part 4: Requirements for emissions-related systems
  • ISO 16017-2:2003 Indoor, ambient and workplace air – Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography – Part 2: Diffusive sampling
  • ISO 18465:2017 Microbiology of the food chain – Quantitative determination of emetic toxin (cereulide) using LC-MS/MS
  • ISO 18901:2002 Imaging materials – Processed silver-gelatin type black-and-white films – Specifications for stability
  • ISO 18902:2001 Imaging materials – Processed photographic films, plates and papers – Filing enclosures and storage containers
  • ISO 18906:2000 Imaging materials — Photographic films — Specifications for safety film
  • ISO 18911:2000 Imaging materials — Processed safety photographic films — Storage practices
  • ISO 18923:2000 Imaging materials — Polyester-base magnetic tape — Storage practices
  • ISO 18925:2002 Imaging materials – Optical disc media – Storage practices
  • ISO 2076:1999 Textiles — Man-made fibres — Generic names
  • ISO 2431:1984 Paints and varnishes — Determination of flow time by use of flow cups
  • ISO 2592:1973 Petroleum products — Determination of flash and fire points — Cleveland open cup method
  • ISO 2719:2002 Determination of flash point – Pensky-Martens closed cup method
  • ISO 2919:1980 Sealed radioactive sources — Classification
  • ISO 3036:1975 Board — Determination of puncture resistance
  • ISO 307:1984 Plastics — Polyamides — Determination of viscosity number
  • ISO 3104:1994 Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity
  • ISO 3170:2004 Petroleum liquids – Manual sampling
  • ISO 3171:1988 Petroleum liquids — Automatic pipeline sampling
  • ISO 3574:1986 Cold-reduced carbon steel sheet of commercial and drawing qualities
  • ISO 3675:1998 Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method
  • ISO 3733:1999 Petroleum products and bituminous materials — Determination of water — Distillation method
  • ISO 3791:1976 Office machines and data processing equipment – Keyboard layouts for numeric applications
  • ISO 389:1975 Acoustics — Reference zero for the calibration of audiometric equipment
  • ISO 4126-1:1991 Safety valves – Part 1: General requirements
  • ISO 535:1991 Paper and board — Determination of water absorptiveness — Cobb method
  • ISO 6245:2001 Petroleum products – Determination of ash
  • ISO 6406:2005 Gas cylinders – Seamless steel gas cylinders – Periodic inspection and testing
  • ISO 6978-1:2003 Natural gas – Determination of mercury – Part 1: Sampling of mercury by chemisorption on iodine
  • ISO 6978-2:2003 Natural gas – Determination of mercury – Part 2: Sampling of mercury by amalgamation on gold/platinum alloy
  • ISO 7225:2005 Gas cylinders – Precautionary labels
  • ISO 7866:1999 Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing
  • ISO 8115:1986 Cotton bales — Dimensions and density
  • ISO 8178-1:1996 Reciprocating internal combustion engines – Exhaust emission measurement – Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
  • ISO 8178-4:1996 Reciprocating internal combustion engines – Exhaust emission measurement – Part 4: Test cycles for different engine applications
  • ISO 8217:2005 Petroleum products – Fuels (class F) – Specifications of marine fuels
  • ISO 8316:1987 Measurement of liquid flow in closed conduits – Method by collection of the liquid in a volumetric tank
  • ISO 8754:2003 Petroleum products – Determination of sulfur content – Energy-dispersive X-ray fluorescence spectrometry
  • ISO 9141-2:1994 Road vehicles – Diagnostic systems – Part 2: CARB requirements for interchange of digital information
  • ISO 9809-1:1999 Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
  • ISO 9809-2:2000 Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa
  • ISO 9809-3:2000 Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 3: Normalized steel cylinders
  • ISO 9931:1991 Coal — Sampling of pulverized coal conveyed by gases in direct fired coal systems
  • ISO 9978:1992 Radiation protection – Sealed radioactive sources – Leakage test methods
  • ISO/IEC 15307:1997 Information technology – Data interchange on 12,7 mm 128-track magnetic tape cartridges – DLT 4 format
  • ISO/IEC 15438:2006 Information technology – Automatic identification and data capture techniques – PDF417 bar code symbology specification
  • ISO/IEC 15896:1999 Information technology — Data interchange on 12,7 mm 208-track magnetic tape cartridges — DLT 5 format
  • ISO/IEC 16382:2000 Information technology — Data interchange on 12,7 mm 208-track magnetic tape cartridges — DLT 6 format
  • ISO/IEC 17011:2004 Conformity assessment – General requirements for accreditation bodies accrediting conformity assessment bodies
  • ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
  • ISO/IEC 17025/Cor1:2006 General requirements for the competence of testing and calibration laboratories – Corrigendum
  • ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
  • ISO/IEC 19794-5:2005 This standard has been revised by: ISO/IEC 19794-5:2011 Information technology – Biometric data interchange formats – Part 5: Face image data
  • ISO/IEC GUIDE 2:1996 Standardization and related activities — General vocabulary
  • ISO/IEC Guide 65:1996 General requirements for bodies operating product certification systems
  • ISO/TR 15349-1:1998 Unalloyed steel — Determination of low carbon content — Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation)
  • ISO/TR 15349-3:1998 Unalloyed steel — Determination of low carbon content — Part 3: Infrared absorption method after combustion in an electric resistance furnace (with preheating)

Standar dari ISO IBR tersebut dapat diakses pada :

Daftar Standar ANSI IBR dari AHAM

Berikut ini adalah standar AHAM IBR yang tersedia :

  • AHAM DW-1-1992 Household Electric Dishwashers
  • AHAM HLD-1:1974 AHAM Performance Evaluation Procedure for Household Tumble Type Clothes Dryers
  • AHAM HLD-2EC:1975 Test Method for Measuring Energy Consumption of Household Tumble Type Clothes Dryers

Standar dari AHAM IBR tersebut dapat diakses pada :

Daftar Standar ANSI IBR dari AMCA

Berikut ini adalah standar AMCA IBR yang tersedia :

  • AMCA 210-74 Laboratory Methods of Testing Fans for Ratings
  • ANSI/AMCA 210-99 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating

Standar dari AMCA IBR tersebut dapat diakses pada :

Daftar Standar ANSI IBR dari ASA

Berikut ini adalah standar ASA IBR yang tersedia :

  • ANSI S1.25-1991 (R2007) American National Standard Specification for Personal Noise Dosimeters
  • ANSI S1.40-1984 (R2001) Specifications for Acoustical Calibrators
  • ANSI S1.4-1983 (R2006)/ANSI S1.4a-1985 (R2006)
  • American National Standard Specification for Sound Level Meters
  • ANSI S1.43-1997 (R2007) Specifications for Integrating-Averaging Sound Level Meters
  • ANSI S12.6-1997 (R2002) American National Standard Methods for Measuring the Real-Ear Attenuation of Hearing Protectors
  • ANSI S3.22-2003 (Errata) Erratum to ANSI S3.22-2003 American National Standard Specification of Hearing Aid Characteristics
  • ANSI S3.6-2004 Specification for Audiometers
  • ANSI/ASA S1.11-2004 (R2009) Octave-Band and Fractional-Octave-Band Analog and Digital Filters

Standar dari ASA IBR tersebut dapat diakses pada :

Daftar Standar ANSI IBR dari AWS

Berikut ini adalah standar AWS IBR yang tersedia :

  • ANSI Z49.1-1967 Safety in Welding and Cutting
  • ANSI/AWS D14.3-1994 Specification for Welding Earthmoving and Construction Equipment
  • AWS A6.0:1965 Safe Practices for Welding and Cutting Containers That Have Held Combustibles
  • AWS B3.0:1977 Standard Qualification Procedure
  • AWS D1.0:1966 Code for Welding in Building Construction
  • AWS D1.1:2000 Structural Welding Code–Steel
  • AWS D1.1/D1.1M:2002 Structural Welding Code -Steel
  • AWS D1.4:1998 Structural Welding Code–Reinforcing Steel
  • AWS D10.9:1969 Standard Qualification for Welding Procedures and Welders for Piping and Tubing
  • AWS D14.4:1977 Classification and Application of Welded Joints for Machinery and Equipment
  • AWS D2.0:1969 Specifications for Welding Highway and Railway Bridges
  • AWS D3.6M-1999 AWS D3.6M:1999 SPECIFICATION FOR UNDERWATER WELDING
  • AWS D8.4:1961 Recommended Safe Practices for Automotive Welding Design

Standar dari AWS IBR tersebut dapat diakses pada :

Daftar Standar ANSI IBR dari HFES

Berikut ini adalah standar HFES IBR yang tersedia :

  • ANSI/HFES 100-2007 Human Factors Engineering of Computer Workstations

Standar dari HFES IBR tersebut dapat diakses pada :

Daftar Standar ANSI IBR dari IES

Berikut ini adalah standar IES IBR yang tersedia :

  • IES LM-16:1993 Practical Guide to Colorimetry of Light Sources
  • IES LM-20:1994 Method for Photometric Measuring and Reporting Test on Reflector Type Lamps
  • IES LM-45:1980 Method for Electrical and Photometric Measurements of General Service Incandescent Filament Lamps
  • IES LM-45:2000 Method for Electrical and Photometric Measurements of General Service Incandescent Filament Lamps
  • IES LM-58:1994 Guide to Spectroradiometric Measurements
  • IESNA Publication:1964 IES Guide for Calculating the Effective Intensity of Flashing Signal Lights

Standar dari IES IBR tersebut dapat diakses pada :

Daftar Standar ANSI IBR dari ISA

Berikut ini adalah standar ISA IBR yang tersedia :

  • ANSI/ISA S75.02-1996 Control Valve Capacity Test Procedures

Standar dari ISA IBR tersebut dapat diakses pada :

Daftar Standar ANSI IBR dari NACE

Berikut ini adalah standar NACE IBR yang tersedia :

  • NACE No. 2/SSPC-SP 10 Near-White Metal Blast Cleaning. Reaffirmed in 2006.
  • NACE No. 3/SSPC-SP 6 Commercial Blast Cleaning. Reaffirmed in 2006.
  • NACE RP0169-1992 Control of External Corrosion on Underground or Submerged Metallic Piping Systems
  • NACE RP0285-1985 Control of External Corrosion on Metallic Buried, Partially Buried, or Submerged Liquid Storage Systems
  • NACE SP0102-2010 Standard Practice, Inline Inspection of Pipelines
  • NACE SP0169-2013 Control of External Corrosion on Underground or Submerged Metallic Piping Systems
  • NACE SP0204-2008 Standard Practice, Stress Corrosion Cracking (SSC) Direct Assessment Methodology
  • NACE Standard MR0175-2003 Standard Material Requirements Metals for Sulfide Stress Cracking and Stress Corrosion Cracking Resistance in Sour Oilfield Environments
  • NACE Standard RP0176-2003 Corrosion Control of Steel Fixed Offshore Platforms Associated with Petroleum Production
  • NACE Standard RP0193-2001 External Cathodic Protection of On-Gra
  • NACE Standard RP0285-2002 Standard Recommended Practice Corrosion Control of Underground Storage Tank Systems by Cathodic Protection
  • NACE Standard SP0169-2007 Control of External Corrosion on Underground or Submerged Metallic Piping Systems
  • NACE Standard SP0204-2015 Stress Corrosion Cracking (SCC) Direct Assessment  Methodology
  • NACE Standard TM0497-2012 Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Piping Systems
  • NACE TM0101-2012 Measurement Techniques Related to Criteria for Cathodic Protection of Underground Storage Tank Systems
  • NACE TM0497-2018 Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Piping Systems
  • SP0285-2011 External Corrosion Control of Underground Storage Tank Systems by Cathodic Protection
  • SP0502-2010 Pipeline External Corrosion Direct Assessment Methodology

Standar dari NACE IBR tersebut dapat diakses pada :

Daftar Standar ANSI IBR dari NEMA

Berikut ini adalah standar NEMA IBR yang tersedia :

  • ANSI/NEMA Z535.1-2006 (R2011) Safety colors
  • ANSI/NEMA Z535.2-2011 Environmental and Facility Safety Signs
  • ANSI/NEMA Z535.5-2011 Safety tags and barricade tapes (for temporary hazards)
  • ANSI/NEMA WC 70/ICEA S-95-658:1999 Standard for Non-Shielded Power Rated Cable 2000V or Less for the Distribution of Electrical Energy
  • DICOM Standard PS 3.10-2011 Digital Imaging and Communications in Medicine (DICOM) standard, Part 10: Media Storage and File Format for Media Interchange
  • DICOM Standard PS 3.11-2011 Digital Imaging and Communications in Medicine (DICOM) standard, Part 11: Media Storage Application Profiles
  • DICOM Standard PS 3.12-2011 Digital Imaging and Communications in Medicine (DICOM) standard, Part 12: Media Formats and Physical Media for Media Interchange
  • DICOM Standard PS 3.14-2011 Digital Imaging and Communications in Medicine (DICOM) standard, Part 14: Grayscale Standard Display Function
  • DICOM Standard PS 3.16-2011 Digital Imaging and Communications in Medicine (DICOM) standard, Part 16: Content Mapping Resource
  • DICOM Standard PS 3.3-2011 Digital Imaging and Communications in Medicine (DICOM) standard, Part 3: Information Object Definitions
  • DICOM Standard PS 3.4-2011 Digital Imaging and Communications in Medicine (DICOM) standard, Part 4: Service Class Specifications
  • NEMA 250-1997 Enclosures for Electrical Equipment (1000 Volts Maximum)
  • NEMA ANSI C78.81:2003 Electric Lamps – Double-Capped Fluorescent Lamps – Dimensional and Electrical Characteristics
  • NEMA DC 3:1989 Resiential Controls – Electrical Walls – Mounted Room Thermostats
  • NEMA EW 1:1962 Requirements for Electric Arc Welding Apparatus
  • NEMA ICS 2.3:1995 Instructions for the Handling, Installation, Operation, and Maintenance of Motor Control Centers
  • NEMA ICS 2.4:2003 Nema iec devices for motor service – a guide for understanding thedifferences
  • NEMA ICS 2:2000 Industrial control and systems controllers, contactors and overload relays rated 600 volts (Includes 2006 errata)
  • NEMA MG 10:1994 (R1999) Energy Management Guide for Selection and Use of Polyphase Motors (RS-43)
  • NEMA MG 1-1993 Motors and Generators (RS-3)
  • NEMA MG 1-2009 Motors and Generators
  • NEMA WC 3:1992 Rubber Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy, Revision 1, February 1994
  • NEMA WD 6:1988 Wiring Devices, Dimensional Requirements
  • NEMA XR 29-2013 Standard Attributes on CT Equipment Related to Dose Optimization and Management

Standar dari NEMA IBR tersebut dapat diakses pada :

Daftar Standar IBR yang disediakan SDO

Untuk daftar judul standar-standar IBR dalam CFR yang disediakan oleh standards developing organizations (SDO) kami tampilkan pada artikel lanjutan.

Demikian artikel dari standarku.com mengenai Daftar Standar ANSI IBR.

Jika ada perbedaan isi dari daftar pada artikel ini dibandingkan dengan web resmi ANSI, maka pembaca harus mengikuti web resmi ANSI.

Mohon saran dari pembaca untuk kelengkapan isi artikel ini, silahkan saran tersebut dapat disampaikan melalui kolom komentar.

Baca artikel lain :

Sumber referensi :

Leave a Comment