Daftar Standar ASTM C

Daftar standar ASTM C adalah kumpulan judul dokumen standar seri C yang diterbitkan oleh organisasi ASTM (American Standard Testing and Material) .

ASTM atau American Standard Testing and Material adalah sebuah organisasi dunia yang mengembangkan standardisasi teknik untuk material, produk, sistem dan jasa.

Organisasi standardisasi internasional yang bersifat sukarela ini berpusat di kota Pennsylvania, Amerika Serikat.

Lebih jelas mengenai ASTM Internasional dapat dibaca pada artikel lain dari standarku.com berikut :

Artikel ini merupakan lanjutan dari 3 artikel sebelumnya sebagaimana link diatas, dengan fokus ke pengetahuan mengenai standar apa saja yang sudah dibuatnya.

Daftar standar ASTM Internasional terdiri dari kode A, B, C, … dan seterusnya hingga kode G.

Dikarenakan sangat banyak jumlah standar tersebut maka artikel menjadi terlalu panjang, oleh karena itu standarku.com memecah menjadi beberapa artikel.

Format penulisan Standar ASTM Internasional

Tata cara penulisan standar ini biasanya diawali dengan huruf dan diikuti dengan nomor, yang ditetapkan secara berurutan.

Ada pilihan (opsional) untuk diikuti oleh tanda hubung dan dua digit terakhir yang berarti tahun di mana standar tersebut diadopsi.

Kode huruf awalan yang ditulis memiliki arti bahwa standar tersebut sesuai dengan subjek sebagaimana berikut :

A = Iron and Steel Materials (Bahan baku Besi dan Baja)
B = Nonferrous Metal Materials (Bahan baku Logam Nonferrous)
C = Ceramic, Concrete, and Masonry Materials (Bahan Keramik, Beton, dan Batu)
D = Miscellaneous Materials (Bahan Lain-lain)
E = Miscellaneous Subjects (Subyek Lain-Lain)
F = Materials for Specific Applications (Bahan baku untuk Aplikasi yang khusus)
G = Corrosion, Deterioration, and Degradation of Materials (Korosi, Deteriorasi, dan Degradasi dari bahan baku)

Kategori Standar ASTM Seri C

Berikut ini adalah daftar Standar ASTM Internasional seri C, yang mencakup standar yang masih aktif saat ini atau yang sudah ditarik.

Standar ASTM yang ditarik (withdrawn standard) adalah standar yang telah dihentikan (discontinued) oleh komite sponsornya.

Suatu standar ASTM dapat dilakukan penarikan,dengan atau tanpa adanya penggantian dengan standar atau aturan yang lebih baru.

Untuk memudahkan, terdapat kategori standar berdasarkan urutan kode standar ASTM C sebagaimana berikut :

C1-C999
C1000-C1999

Berikut adalah Daftar standar ASTM Internasional selengkapnya untuk seri C, sedangkan untuk seri D hingga G tersedia di artikel lain dari standarku.com karena terlalu panjang jika digabung di artikel ini.

Standar ASTM Seri C

Standar ASTM C1-C999

C4 – 04(2018) Specification for Clay Drain Tile and Perforated Clay Drain Tile
C5 – 18 Specification for Quicklime for Structural Purposes
C10/C10M – 19 Specification for Natural Cement
C11 – 18b Terminology Relating to Gypsum and Related Building Materials and Systems
C12 – 17e1 Practice for Installing Vitrified Clay Pipe Lines
C14 – 20 Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
C14M – 20 Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)
C16 – 03(2018) Test Method for Load Testing Refractory Shapes at High Temperatures
C20 – 00(2015) Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
C22/C22M – 00(2015) Specification for Gypsum
C24 – 09(2018) Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High-Alumina Refractory Materials
C25 – 19 Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
C25-RU-RU – 19 Стандартные методы химического анализа известняка, негашеной и гашеной извести
C27 – 98(2018) Classification of Fireclay and High-Alumina Refractory Brick
C28/C28M – 10(2020) Specification for Gypsum Plasters
C29/C29M – 17a Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate
C29/C29M-SP – 17a Método de prueba estándar para determinar la densidad a granel (“peso unitario”) y los huecos de aire de un agregado
C29/C29M-POR – 17a Método de ensaio padrão para Densidade a granel (“peso unitário”) e vazios no agregado
C31/C31M – 19a Practice for Making and Curing Concrete Test Specimens in the Field
C31/C31M-SP – 19a Práctica estándar para la preparación y curado de especímenes de prueba de hormigón en el campo
C31/C31M-POR – 19a Prática padrão para Fazer e curar espécimes de ensaio de concreto no campo
C32 – 13(2017) Specification for Sewer and Manhole Brick (Made From Clay or Shale)
C33/C33M – 18 Specification for Concrete Aggregates
C33/C33M-SP – 18 Especificación estándar para agregados para hormigón
C33/C33M-POR – 18 Especificação padrão para Agregados de concreto
C34 – 17 Specification for Structural Clay Loadbearing Wall Tile
C35 – 01(2019) Specification for Inorganic Aggregates for Use in Gypsum Plaster
C39/C39M – 20 Test Method for Compressive Strength of Cylindrical Concrete Specimens
C39/C39M-SP – 20 Método de prueba estándar para la determinación de la resistencia a la compresión de especímenes cilíndricos de hormigón
C39/C39M-POR – 20 Método de ensaio padrão para Resistência à compressão de espécimes de concreto cilíndricos
C40/C40M – 20 Test Method for Organic Impurities in Fine Aggregates for Concrete
C40/C40M-SP – 20 Método de prueba estándar para la determinación de impurezas orgánicas en agregados finos para hormigón
C40/C40M-POR – 20 Método de ensaio padrão para Impurezas orgânicas em agregados miúdos para concreto
C42/C42M – 20 Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
C42/C42M-POR – 20 Método de ensaio padrão para Obter e ensaiar testemunhos perfurados e vigas serradas de concreto
C50/C50M – 13(2019) Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
C51 – 20 Terminology Relating to Lime and Limestone (as Used by the Industry)
C55 – 17 Specification for Concrete Building Brick
C56 – 13(2017) Specification for Structural Clay Nonloadbearing Tile
C59/C59M – 00(2020) Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
C61/C61M – 00(2020) Specification for Gypsum Keene’s Cement
C62 – 17 Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)
C67/C67M – 20 Test Methods for Sampling and Testing Brick and Structural Clay Tile
C70 – 20 Test Method for Surface Moisture in Fine Aggregate
C71 – 12(2018) Terminology Relating to Refractories
C73 – 17 Specification for Calcium Silicate Brick (Sand-Lime Brick)
C76 – 20 Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
C76M – 20 Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)
C78/C78M – 18 Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
C78/C78M-SP – 18 Método de prueba estándar para determinar la resistencia a la flexión del hormigón (usando una viga simple con carga de tres puntos)
C78/C78M-POR – 18 Método de ensaio padrão para Resistência flexural do concreto (usando viga simples com terceiro ponto de aplicação de carga)
C87/C87M – 17 Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
C88/C88M – 18 Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
C90 – 16a Specification for Loadbearing Concrete Masonry Units
C91/C91M – 18 Specification for Masonry Cement
C92 – 95(2015) Test Methods for Sieve Analysis and Water Content of Refractory Materials
C94/C94M – 20 Specification for Ready-Mixed Concrete
C94/C94M-SP – 20 Especificación de estándar para hormigón elaborado
C94/C94M-POR – 20 Especificação padrão para Concreto pré-misturado
C97/C97M – 18 Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
C99/C99M – 18 Test Method for Modulus of Rupture of Dimension Stone
C108 – 46(2018) Symbols for Heat Transmission
C109/C109M – 20b Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50 mm] Cube Specimens)
C109/C109M-SP – 20b Método de prueba estándar para resistencia a la compresión de morteros de cemento hidráulico (utilizando especímenes cúbicos de 2 in. o [50 mm])
C109/C109M-POR – 20b Método de ensaio padrão para Resistência à compressão de argamassas de cimento hidráulico (usando espécimes de cubo de 2 in. ou [50 mm])
C110 – 20 Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
C113 – 14(2019) Test Method for Reheat Change of Refractory Brick
C114 – 18 Test Methods for Chemical Analysis of Hydraulic Cement
C114-RUS – 18 Методы химического анализа гидравлического цемента
C117 – 17 Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
C117-SP – 17 Método de prueba estándar para materiales más finos que un tamiz de 75 μm (N.° 200) en los agregados minerales mediante lavado
C117-POR – 17 Método de ensaio padrão para Materiais mais finos do que a peneira de 75 μm (n.º 200) em agregados minerais por lavagem
C118 – 19 Specification for Concrete Pipe for Irrigation or Drainage
C118M – 19 Specification for Concrete Pipe for Irrigation or Drainage (Metric)
C119 – 20 Terminology Relating to Dimension Stone
C120/C120M – 19 Test Methods for Flexure Testing of Structural and Roofing Slate
C121/C121M – 20 Test Method for Water Absorption of Slate
C123/C123M – 14 Test Method for Lightweight Particles in Aggregate
C125 – 20 Terminology Relating to Concrete and Concrete Aggregates
C126 – 19 Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
C127 – 15 Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate
C127-SP – 15 Método de prueba estándar para la densidad relativa (gravedad específica) y la absorción del agregado grueso
C127-POR – 15 Método de ensaio padrão para Densidade relativa (grau específico) e absorção de agregados graúdos
C128 – 15 Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate
C128-SP – 15 Método de prueba estándar para la densidad relativa (gravedad específica) y la absorción del agregado fino
C128-RU-RU – 15 Стандартный метод испытания для определения относительной плотности (удельного веса) и поглощения мелкого заполнителя
C128-POR – 15 Método de ensaio padrão para Densidade relativa (grau específico) e absorção de agregados miúdos
C129 – 17 Specification for Nonloadbearing Concrete Masonry Units
C131/C131M – 20 Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
C133 – 97(2015) Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
C134 – 95(2016) Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
C135 – 96(2015) Test Method for True Specific Gravity of Refractory Materials by Water Immersion
C136/C136M – 19 Test Method for Sieve Analysis of Fine and Coarse Aggregates
C136/C136M-SP – 19 Método de prueba estándar para análisis granulométrico de agregados finos y gruesos
C136/C136M-POR – 19 Método de ensaio padrão para Análise de peneira de agregados miúdos e graúdos
C138/C138M – 17a Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
C138/C138M-SP – 17a Método de Ensayo Normalizado de Densidad (Peso Unitario), Rendimiento, y Contenido de Aire (Gravimétrico) del Concreto
C138/C138M-POR – 17a Método de ensaio padrão para Densidade (peso unitário), rendimento e teor de ar (gravimétrico) do concreto
C139 – 17 Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes
C140/C140M – 20a Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
C141/C141M – 14 Specification for Hydrated Hydraulic Lime for Structural Purposes
C142/C142M – 17 Test Method for Clay Lumps and Friable Particles in Aggregates
C143/C143M – 20 Test Method for Slump of Hydraulic-Cement Concrete
C143/C143M-SP – 20 Método de prueba estándar para el asentamiento del hormigón de cemento hidráulico
C143/C143M-POR – 20 Método de ensaio padrão para Abatimento do concreto de cimento hidráulico
C144 – 18 Specification for Aggregate for Masonry Mortar
C144-SP – 18 Especificación de estándar para agregados de mortero de albañilería
C144-POR – 18 Especificação padrão para Agregados para argamassa de alvenaria
C146 – 94a(2014) Test Methods for Chemical Analysis of Glass Sand
C147 – 86(2020) Test Methods for Internal Pressure Strength of Glass Containers
C148 – 17 Test Methods for Polariscopic Examination of Glass Containers
C149 – 14(2020) Test Method for Thermal Shock Resistance of Glass Containers
C150/C150M – 20 Specification for Portland Cement
C150/C0150M-SP – Especificación de estándar para cemento Portland
C150/C150M-POR – 20 Especificação padrão para Cimento Portland
C151/C151M – 18 Test Method for Autoclave Expansion of Hydraulic Cement
C155 – 97(2018) Classification of Insulating Firebrick
C156 – 20 Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete
C157/C157M – 17 Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
C158 – 02(2017) Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
C159 – 06(2016) Specification for Vitrified Clay Filter Blocks
C162 – 05(2015) Terminology of Glass and Glass Products
C163 – 05(2016) Practice for Mixing Thermal Insulating Cement Samples
C165 – 07(2017) Test Method for Measuring Compressive Properties of Thermal Insulations
C166 – 05(2016) Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement
C167 – 18 Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
C168 – 19 Terminology Relating to Thermal Insulation
C169 – 16 Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass
C170/C170M – 17 Test Method for Compressive Strength of Dimension Stone
C171 – 20 Specification for Sheet Materials for Curing Concrete
C172/C172M – 17 Practice for Sampling Freshly Mixed Concrete
C172/C172M-SP – 17 Práctica estándar para Obtención de muestras de hormigón recién mezclado
C172/C172M-POR – 17 Prática padrão para Amostragem de concreto recém-misturado
C173/C173M – 16 Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
C173/C173M-SP – 16 Método de Ensayo Normalizado de Contenido de Aire de Concreto Recién Mezclado por el Método Volumétrico
C173/C173M-POR – 16 Método de ensaio padrão para Teor de ar no concreto recém-misturado pelo Método volumétrico
C174/C174M – 17 Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
C177 – 19 Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
C179 – 14(2019) Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
C181 – 11(2018) Test Method for Workability Index of Fireclay and High-Alumina Refractory Plastics
C182 – 19 Test Method for Thermal Conductivity of Insulating Firebrick
C183/C183M – 16 Practice for Sampling and the Amount of Testing of Hydraulic Cement
C183/C183M-RUS – 16 Стандартная методика отбора проб и определения объема испытаний гидравлического цемента1
C185 – 20 Test Method for Air Content of Hydraulic Cement Mortar
C187 – 16 Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
C188 – 17 Test Method for Density of Hydraulic Cement
C191 – 19 Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
C192/C192M – 19 Practice for Making and Curing Concrete Test Specimens in the Laboratory
C192/C192M-SP – 19 Práctica estándar para la preparación y curado de especímenes de prueba de hormigón en el laboratorio
C192/C192M-POR – 19 Prática padrão para Fazer e curar espécimes de ensaio de concreto no laboratório
C195 – 07(2019) Specification for Mineral Fiber Thermal Insulating Cement
C196 – 00(2019) Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
C198 – 09(2019) Test Method for Cold Bonding Strength of Refractory Mortar
C199 – 84(2016) Test Method for Pier Test for Refractory Mortars
C201 – 93(2019) Test Method for Thermal Conductivity of Refractories
C202 – 19 Test Method for Thermal Conductivity of Refractory Brick
C203 – 05a(2017) Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
C204 – 18e1 Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
C204-RU-RU – 18e1 Стандартные методы испытания тонкости помола гидравлического цемента воздухопроницаемым оборудованием
C206 – 14 Specification for Finishing Hydrated Lime
C207 – 18 Specification for Hydrated Lime for Masonry Purposes
C208 – 12(2017)e2 Specification for Cellulosic Fiber Insulating Board
C209 – 20 Test Methods for Cellulosic Fiber Insulating Board
C210 – 95(2019) Test Method for Reheat Change of Insulating Firebrick
C212 – 20 Specification for Structural Clay Facing Tile
C215 – 19 Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens
C216 – 19 Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
C217/C217M – 20 Test Method for Weather Resistance of Slate
C219 – 20a Terminology Relating to Hydraulic and Other Inorganic Cements
C220 – 91(2015) Specification for Flat Asbestos-Cement Sheets
C224 – 78(2020) Practice for Sampling Glass Containers
C225 – 85(2014) Test Methods for Resistance of Glass Containers to Chemical Attack
C226 – 19 Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement
C230/C230M – 20 Specification for Flow Table for Use in Tests of Hydraulic Cement
C231/C231M – 17a Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
C231/C231M-SP – 17a Método de Ensayo Normalizado de Contenido de Aire del Concreto Recién Mezclado Mediante el Método por Presión
C231/C231M-POR – 17a Método de ensaio padrão para Teor de ar no concreto recém-misturado pelo Método de pressão
C232/C232M – 20 Test Method for Bleeding of Concrete
C233/C233M – 18 Test Method for Air-Entraining Admixtures for Concrete
C240 – 20 Test Methods for Testing Cellular Glass Insulation Block
C241/C241M – 20 Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic
C242 – 20b Terminology of Ceramic Whitewares and Related Products
C260/C260M – 10a(2016) Specification for Air-Entraining Admixtures for Concrete
C260/C260M-SP – 10a(2016) Especificación Normalizada para Aditivos Incorporadores de Aire para Concreto
C260/C260M-POR – 10a(2016) Especificação padrão para Aditivos incorporadores de ar para concreto
C266 – 20 Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
C267 – 20 Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
C270 – 19ae1 Specification for Mortar for Unit Masonry
C271/C271M – 16 Test Method for Density of Sandwich Core Materials
C272/C272M – 18 Test Method for Water Absorption of Core Materials for Sandwich Constructions
C273/C273M – 20 Test Method for Shear Properties of Sandwich Core Materials
C279 – 17 Specification for Chemical-Resistant Masonry Units
C282 – 20 Test Method for Acid Resistance of Porcelain Enamels(Citric Acid Spot Test)
C283 – 13(2017) Test Methods for Resistance of Porcelain Enameled Utensils to Boiling Acid
C285 – 10(2020) Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
C286 – 99(2017) Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems
C287 – 98(2012) Specification for Chemical-Resistant Sulfur Mortar
C288 – 20 Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
C293/C293M – 16 Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
C294 – 19 Descriptive Nomenclature for Constituents of Concrete Aggregates
C295/C295M – 19 Guide for Petrographic Examination of Aggregates for Concrete
C296/C296M – 00(2015) Specification for Asbestos-Cement Pressure Pipe
C297/C297M – 16 Test Method for Flatwise Tensile Strength of Sandwich Constructions
C297/C297M-RU-RU – 16 Стандартный метод испытаний определения прочности на растяжение перпендикулярно к плоскости «сэндвич»конструкций
C301 – 18 Test Methods for Vitrified Clay Pipe
C302 – 13(2017) Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
C303 – 10(2016)e1 Test Method for Dimensions and Density of Preformed Block and Board–Type Thermal Insulation
C305 – 20 Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
C307 – 18 Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
C308 – 18 Practice for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
C309 – 19 Specification for Liquid Membrane-Forming Compounds for Curing Concrete
C311/C311M – 18 Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
C315 – 07(2016) Specification for Clay Flue Liners and Chimney Pots
C317/C317M – 00(2019) Specification for Gypsum Concrete
C318/C318M – 13(2018) Specification for Gypsum Formboard
C321 – 00(2012) Test Method for Bond Strength of Chemical-Resistant Mortars
C322 – 09(2018) Practice for Sampling Ceramic Whiteware Clays
C323 – 56(2016) Test Methods for Chemical Analysis of Ceramic Whiteware Clays
C324 – 01(2014) Test Method for Free Moisture in Ceramic Whiteware Clays
C325 – 07(2014) Guide for Wet Sieve Analysis of Ceramic Whiteware Clays
C326 – 09(2018) Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays
C329 – 88(2020) Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
C330/C330M – 17a Specification for Lightweight Aggregates for Structural Concrete
C330/C330M-SP – 17a Especificación de estándar para agregados ligeros para hormigón estructural
C330/C330M-POR – 17a Especificação padrão para Agregados leves para concreto estrutural
C331/C331M – 17 Specification for Lightweight Aggregates for Concrete Masonry Units
C332 – 17 Specification for Lightweight Aggregates for Insulating Concrete
C335/C335M – 17 Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
C336 – 71(2020) Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation
C338 – 93(2019) Test Method for Softening Point of Glass
C341/C341M – 18 Practice for Preparation and Conditioning of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete Used for Length Change Measurements
C346 – 87(2018) Test Method for 45-deg Specular Gloss of Ceramic Materials
C348 – 20 Test Method for Flexural Strength of Hydraulic-Cement Mortars
C349 – 18 Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
C356 – 17 Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
C357 – 07(2015) Test Method for Bulk Density of Granular Refractory Materials
C359 – 20 Test Method for Early Stiffening of Hydraulic-Cement (Mortar Method)
C361 – 19a Specification for Reinforced Concrete Low-Head Pressure Pipe
C361M – 19 Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric)
C363/C363M – 16 Test Method for Node Tensile Strength of Honeycomb Core Materials
C364/C364M – 16 Test Method for Edgewise Compressive Strength of Sandwich Constructions
C365/C365M – 16 Test Method for Flatwise Compressive Properties of Sandwich Cores
C365/C365M-RUS – 16 Стандартный метод определения свойств многослойных заполнителей при их сжатии перпендикулярно слоям
C366/C366M – 16 Test Methods for Measurement of Thickness of Sandwich Cores
C366/C366M-RUS – 16 Стандартные методы измерения толщины заполнителей слоистых конструкций
C367/C367M – 16 Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels
C368 – 88(2020) Test Method for Impact Resistance of Ceramic Tableware
C370 – 12(2020) Test Method for Moisture Expansion of Fired Whiteware Products
C371 – 09(2018) Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
C372 – 94(2020) Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by Dilatometer Method
C373 – 18 Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products
C374 – 14(2018) Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
C375 – 58(2016) Classification of Water Used in Milling of Porcelain Enamel
C384 – 04(2016) Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
C385 – 58(2018) Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils
C386 – 93(2012) Practice for Use of Chemical-Resistant Sulfur Mortar
C387/C387M – 17 Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar
C390 – 08(2019) Practice for Sampling and Acceptance of Thermal Insulation Lots
C393/C393M – 20 Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
C394/C394M – 16 Test Method for Shear Fatigue of Sandwich Core Materials
C395 – 01(2012) Specification for Chemical-Resistant Resin Mortars
C397 – 00(2012) Practice for Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
C398 – 98(2012) Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry
C399 – 98(2012) Practice for Use of Chemical-Resistant Resin Mortars
C400 – 19 Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid
C401 – 12(2018) Classification of Alumina and Alumina-Silicate Castable Refractories
C403/C403M – 16 Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
C404 – 18 Specification for Aggregates for Masonry Grout
C406/C406M – 15 Specification for Roofing Slate
C408 – 88(2020) Test Method for Thermal Conductivity of Whiteware Ceramics
C410 – 13(2017) Specification for Industrial Floor Brick
C411 – 19 Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
C412 – 19 Specification for Concrete Drain Tile
C412M – 19 Specification for Concrete Drain Tile (Metric)
C413 – 18 Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C414 – 03(2012) Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
C416 – 97(2018) Classification of Silica Refractory Brick
C417 – 05(2015) Test Method for Thermal Conductivity of Unfired Monolithic Refractories
C418 – 20 Test Method for Abrasion Resistance of Concrete by Sandblasting
C419 – 20 Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
C421 – 08(2020) Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation
C423 – 17 Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
C424 – 93(2020) Test Method for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment
C425 – 04(2018) Specification for Compression Joints for Vitrified Clay Pipe and Fittings
C425-SP – 04(2018)
C425-POR – 04(2018) Especificação padrão para Juntas de compressão para tubo cerâmico vitrificado e acessórios
C426 – 16 Test Method for Linear Drying Shrinkage of Concrete Masonry Units
C428/C428M – 05(2019) Specification for Asbestos-Cement Nonpressure Sewer Pipe
C429 – 16 Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
C430 – 17 Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
C441/C441M – 17 Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
C443 – 20 Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
C443M – 20 Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)
C444 – 17 Specification for Perforated Concrete Pipe
C444M – 17 Specification for Perforated Concrete Pipe (Metric)
C447 – 15 Practice for Estimating the Maximum Use Temperature of Thermal Insulations
C448 – 88(2016) Test Methods for Abrasion Resistance of Porcelain Enamels
C449 – 07(2019) Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
C450 – 18 Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging
C451 – 19 Test Method for Early Stiffening of Hydraulic Cement (Paste Method)
C452 – 19e1 Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
C454 – 10(2017) Test Method for Disintegration of Carbon Refractories by Alkali
C455 – 07(2018) Classification of Chrome, Chrome-Magnesia, Magnesia-Chrome, and Magnesia Brick
C456 – 18 Test Method for Hydration Resistance of Basic Bricks and Shapes
C457/C457M – 16 Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
C458/C458M – 98(2019) Test Method for Organic Fiber Content of Asbestos-Cement Products
C459/C459M – 97(2019) Test Methods for Asbestos-Cement Flat Products
C461 – 17 Test Methods for Mastics and Coatings Used With Thermal Insulation
C465 – 19 Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements
C465-RU-RU – 19 Стандартные технические условия на технологические добавки для использования в производстве гидравлического цемента
C466 – 03(2012) Specification for Chemically Setting Silicate and Silica Chemical-Resistant Mortars
C467 – 14(2018) Classification of Mullite Refractories
C469/C469M – 14 Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression
C470/C470M – 15 Specification for Molds for Forming Concrete Test Cylinders Vertically
C471M – 20a Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)
C472 – 20 Test Methods for Physical Testing of Gypsum, Gypsum Plasters, and Gypsum Concrete
C473 – 19 Test Methods for Physical Testing of Gypsum Panel Products
C474 – 15(2020) Test Methods for Joint Treatment Materials for Gypsum Board Construction
C475/C475M – 17 Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
C476 – 20 Specification for Grout for Masonry
C478/C478M – 20 Specification for Circular Precast Reinforced Concrete Manhole Sections
C479 – 04(2017) Specification for Vitrified Clay Liner Plates
C480/C480M – 16 Test Method for Flexure Creep of Sandwich Constructions
C481 – 99(2016) Test Method for Laboratory Aging of Sandwich Constructions
C482 – 20 Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste
C484 – 20 Test Method for Thermal Shock Resistance of Glazed Ceramic Tile
C485 – 16 Test Method for Measuring Warpage of Ceramic Tile
C488 – 16 Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
C490/C490M – 17 Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
C492 – 92(2017)e1 Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
C494/C494M – 19 Specification for Chemical Admixtures for Concrete
C494/C494M-SP – 19 Especificación de estándar para aditivos químicos para hormigón
C494/C494M-POR – 19 Especificação padrão para Aditivos químicos para concreto
C495/C495M – 12(2019) Test Method for Compressive Strength of Lightweight Insulating Concrete
C496/C496M – 17 Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
C496/C496M-SP – 17 Método de prueba estándar para Determinación de la resistencia a la tracción por compresión diametral de especímenes cilíndricos de hormigón
C496/C496M-POR – 17 Método de ensaio padrão para Resistência à tração por compressão diametral de espécimes de concreto cilíndricos
C497M – 20a Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile (Metric)
C497 – 20e1 Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile
C499 – 20 Test Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile
C500/C500M – 07(2019) Test Methods for Asbestos-Cement Pipe
C501 – 84(2015) Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
C502 – 16 Test Method for Wedging of Flat, Rectangular Ceramic Wall and Floor Tile
C503/C503M – 15 Specification for Marble Dimension Stone
C505 – 19 Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
C505M – 19 Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
C506M – 20 Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)
C506 – 20e1 Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
C507 – 20 Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
C507M – 20 Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)
C508/C508M – 00(2015) Specification for Asbestos-Cement Underdrain Pipe
C509 – 06(2015) Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
C510 – 16 Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
C511 – 19 Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
C512/C512M – 15 Test Method for Creep of Concrete in Compression
C513/C513M – 11(2019) Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength
C514 – 04(2020) Specification for Nails for the Application of Gypsum Board
C515 – 13(2018) Specification for Chemical-Resistant Ceramic Tower Packings
C516 – 19 Specification for Vermiculite Loose Fill Thermal Insulation
C518 – 17 Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
C520 – 15(2020) Test Methods for Density of Granular Loose Fill Insulations
C522 – 03(2016) Test Method for Airflow Resistance of Acoustical Materials
C530 – 13(2017) Specification for Structural Clay Nonloadbearing Screen Tile
C531 – 18 Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C533 – 17 Specification for Calcium Silicate Block and Pipe Thermal Insulation
C534/C534M – 20a Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
C535 – 16 Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
C536 – 83(2018) Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing
C537 – 87(2018) Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage
C538 – 83(2018) Test Method for Color Retention of Red, Orange, and Yellow Porcelain Enamels
C539 – 84(2016) Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
C541/C541M – 98(2019) Specification for Linings for Asbestos-Cement Pipe
C542 – 05(2017) Specification for Lock-Strip Gaskets
C544 – 18 Test Method for Hydration of Dead-Burned Magnesite or Periclase Grain
C545 – 97(2018) Classification of Zircon Refractories
C547 – 19 Specification for Mineral Fiber Pipe Insulation
C549 – 18 Specification for Perlite Loose Fill Insulation
C550 – 15(2020) Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
C551/C551M – 07(2019) Specification for Asbestos-Cement Fiberboard Insulating Panels
C552 – 17e1 Specification for Cellular Glass Thermal Insulation
C553 – 13(2019) Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
C554 – 93(2020) Test Method for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock Method
C556 – 16(2020) Test Method for Resistance of Overglaze Decorations to Attack by Detergents
C557 – 03(2017) Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
C559 – 16(2020) Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
C560 – 20 Test Methods for Chemical Analysis of Graphite
C561 – 16 Test Method for Ash in a Graphite Sample
C562 – 15 Test Method for Moisture in a Graphite Sample
C563 – 20 Guide for Approximation of Optimum SO3 in Hydraulic Cement
C564 – 20a Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
C565 – 15 Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
C566 – 19 Test Method for Total Evaporable Moisture Content of Aggregate by Drying
C566-SP – 19 Método de prueba estándar para calcular el contenido total de humedad evaporable de los agregados mediante secado
C566-POR – 19 Método de ensaio padrão para Teor total de umidade evaporável do agregado por secagem
C567/C567M – 19 Test Method for Determining Density of Structural Lightweight Concrete
C567/C567M-SP – 19 Método de prueba estándar para determinar la densidad del hormigón estructural liviano
C567/C567M-POR – 19 Método de ensaio padrão para Determinar a densidade do concreto leve estrutural
C568/C568M – 15 Specification for Limestone Dimension Stone
C577 – 19 Test Method for Permeability of Refractories
C578 – 19 Specification for Rigid, Cellular Polystyrene Thermal Insulation
C579 – 18 Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C580 – 18 Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C581 – 20 Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
C582 – 09(2016) Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
C583 – 15 Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures
C584 – 81(2016) Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products
C585 – 10(2016) Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing
C586 – 19 Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)
C587 – 04(2018) Specification for Gypsum Veneer Plaster
C591 – 20 Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
C592 – 16 Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
C593 – 19 Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization
C595/C595M – 20 Specification for Blended Hydraulic Cements
C595/C595M-POR – 20 Especificação padrão para Cimentos hidráulicos misturados
C595/C595M-SP – 20 Especificación de estándar para cementos hidráulicos mezclados
C596 – 18 Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
C597 – 16 Test Method for Pulse Velocity Through Concrete
C598 – 93(2019) Test Method for Annealing Point and Strain Point of Glass by Beam Bending
C602 – 20 Specification for Agricultural Liming Materials
C603 – 14(2019) Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
C604 – 18 Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
C607 – 88(2016) Practice for Coking Large Shapes of Carbon-Bearing Materials
C609 – 20 Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile
C610 – 17 Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
C611 – 98(2016) Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature
C612 – 14(2019) Specification for Mineral Fiber Block and Board Thermal Insulation
C613 – 19 Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
C614 – 20 Test Method for Alkali Resistance of Porcelain Enamels
C615/C615M – 18e1 Specification for Granite Dimension Stone
C616/C616M – 15 Specification for Quartz-Based Dimension Stone
C617/C617M – 15 Practice for Capping Cylindrical Concrete Specimens
C617/C617M-SP – 15 Práctica estándar para la obturación de especímenes cilíndricos de hormigón
C617/C617M-POR – 15 Prática padrão para Capeamento de espécimes de concreto cilíndricos
C618 – 19 Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
C618-SP – 19 Especificación estándar para Ceniza volante de carbón y puzolana natural cruda o calcinada para su uso en hormigón
C618-RUS – 19 Стандартная спецификация на летучую золу угля и сырой или прокаленный природный пуццолан для использования в бетоне
C618-POR – 19 Especificação padrão para Cinza volante de carvão e pozolana natural pura ou calcinada para uso em concreto
C621 – 09(2018) Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
C623 – 92(2015) Test Method for Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Glass and Glass-Ceramics by Resonance
C625 – 15 Practice for Reporting Irradiation Results on Graphite
C627 – 18 Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
C629/C629M – 15 Specification for Slate Dimension Stone
C631 – 09(2020) Specification for Bonding Compounds for Interior Gypsum Plastering
C632 – 88(2016) Test Method for Reboiling Tendency of Sheet Steel for Porcelain Enameling
C633 – 13(2017) Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
C634 – 13e1 Terminology Relating to Building and Environmental Acoustics
C635/C635M – 17 Specification for Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
C636/C636M – 19 Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
C637 – 20 Specification for Aggregates for Radiation-Shielding Concrete
C638 – 20 Descriptive Nomenclature of Constituents of Aggregates for Radiation-Shielding Concrete
C639 – 15(2020) Test Method for Rheological (Flow) Properties of Elastomeric Sealants
C641 – 17 Test Method for Iron Staining Materials in Lightweight Concrete Aggregates
C642 – 13 Test Method for Density, Absorption, and Voids in Hardened Concrete
C645 – 18 Specification for Nonstructural Steel Framing Members
C647 – 19 Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
C648 – 20 Test Method for Breaking Strength of Ceramic Tile
C650 – 20 Test Method for Determination of Resistance to Chemical Substances
C651 – 20 Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
C652 – 19b Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
C653 – 17 Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation
C654 – 19 Specification for Porous Concrete Pipe
C654M – 19 Specification for Porous Concrete Pipe (Metric)
C655 – 19a Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
C655M – 19a Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)
C656 – 17 Specification for Structural Insulating Board, Calcium Silicate
C657 – 19 Test Method for D-C Volume Resistivity of Glass
C658 – 98(2012) Specification for Chemical-Resistant Resin Grouts for Brick or Tile
C660 – 81(2020) Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling
C661 – 15 Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
C662 – 16 Specification for Impervious Graphite Pipe and Threading
C664 – 10(2020) Test Methods for Thickness of Diffusion Coating
C665 – 17 Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
C666/C666M – 15 Test Method for Resistance of Concrete to Rapid Freezing and Thawing
C667 – 17 Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
C670 – 15 Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
C670-RUS – 15 СТАНДАРТНАЯ МЕТОДИКА ПОДГОТОВКИ ДАННЫХ ПО ПРЕЦИЗИОННОСТИ И СИСТЕМАТИЧЕСКОЙ ПОГРЕШНОСТИ ДЛЯ МЕТОДОВ ИСПЫТАНИЙ СТРОИТЕЛЬНЫХ МАТЕРИАЛОВ
C672/C672M – 12 Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
C673 – 97(2018) Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes
C674 – 13(2018) Test Methods for Flexural Properties of Ceramic Whiteware Materials
C675 – 91(2016) Test Method for Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass Containers
C676 – 04(2019) Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware
C679 – 15 Test Method for Tack-Free Time of Elastomeric Sealants
C680 – 19 Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs
C681 – 14(2019) Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
C685/C685M – 17 Specification for Concrete Made by Volumetric Batching and Continuous Mixing
C685/C685M-SP – 17 Especificación estándar para hormigón preparado mediante dosificación volumétrica y mezcla continua
C685/C685M-POR – 17 Especificação padrão para Concreto feito por dosagem volumétrica e mistura contínua
C686 – 17 Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
C687 – 18 Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
C688 – 14 Specification for Functional Additions for Use in Hydraulic Cements
C689 – 09(2019) Test Method for Modulus of Rupture of Unfired Clays
C690 – 09(2019) Test Method for Particle Size Distribution of Alumina or Quartz Powders by Electrical Sensing Zone Technique
C692 – 13(2018) Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
C693 – 93(2019) Test Method for Density of Glass by Buoyancy
C694 – 90a(2016) Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution
C695 – 15(2020) Test Method for Compressive Strength of Carbon and Graphite
C696 – 19 Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
C697 – 16 Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
C698 – 16 Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O2)
C700 – 18 Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
C702/C702M – 18 Practice for Reducing Samples of Aggregate to Testing Size
C702/C702M-SP – 18 Práctica estándar para reducir muestras de agregado a tamaño para pruebas
C702/C702M-POR – 18 Prática padrão para Reduzir amostras de agregados para tamanho de ensaio
C703 – 72(2016) Test Methods for Spalling Resistance of Porcelain Enameled Aluminum
C704/C704M – 15e1 Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
C706 – 19 Specification for Limestone for Animal Feed Use
C708 – 16 Specification for Nuclear-Grade Beryllium Oxide Powder
C711 – 14 Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
C712 – 14 Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
C712-RU-RU – 14 Стандартный метод испытания для определения образования пузырей однокомпонентных эластомерных герметиков с испаряющимся растворителем
C714 – 17 Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
C715 – 90(2016) Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
C716 – 06(2020) Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
C717 – 19 Terminology of Building Seals and Sealants
C719 – 14(2019) Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
C721 – 20 Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability
C722 – 18 Specification for Chemical-Resistant Monolithic Floor Surfacings
C723 – 98(2012) Practice for Chemical-Resistant Resin Grouts for Brick or Tile
C724 – 91(2020) Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass
C726 – 17 Specification for Mineral Wool Roof Insulation Board
C727 – 19 Practice for Installation and Use of Reflective Insulation in Building Constructions
C728 – 17a Specification for Perlite Thermal Insulation Board
C729 – 11(2016) Test Method for Density of Glass by the Sink-Float Comparator
C730 – 98(2013) Test Method for Knoop Indentation Hardness of Glass
C731 – 15 Test Method for Extrudability, After Package Aging, of Latex Sealants
C731-RUS – 15 Стандартный метод определения шприцуемости латексных герметиков после циклического старения
C732 – 17 Test Method for Aging Effects of Artificial Weathering on Latex Sealants
C734 – 15(2019) Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
C735 – 04(2019) Test Method for Acid Resistance of Ceramic Decorations on Returnable Beer and Beverage Glass Containers
C736 – 12(2017) Test Method for Extension-Recovery and Adhesion of Latex Sealants
C737 – 13 Specification for Limestone for Dusting of Coal Mines
C738 – 94(2020) Test Method for Lead and Cadmium Extracted from Glazed Ceramic Surfaces
C739 – 17 Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
C740/C740M – 13(2019) Guide for Evacuated Reflective Insulation In Cryogenic Service
C743 – 87(2018) Test Method for Continuity of Porcelain Enamel Coatings
C744 – 16 Specification for Prefaced Concrete and Calcium Silicate Masonry Units
C747 – 16 Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
C748 – 20 Test Method for Rockwell Hardness of Graphite Materials
C749 – 15(2020) Test Method for Tensile Stress-Strain of Carbon and Graphite
C750 – 18 Specification for Nuclear-Grade Boron Carbide Powder
C751 – 20 Specification for Nuclear-Grade Boron Carbide Pellets
C752 – 18 Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy
C753 – 16a Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder
C754 – 20 Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
C755 – 20 Practice for Selection of Water Vapor Retarders for Thermal Insulation
C756 – 87(2016) Test Method for Cleanability of Surface Finishes
C757 – 16e1 Specification for Nuclear-Grade Plutonium Dioxide Powder for Light Water Reactors
C758 – 18 Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal
C759 – 18 Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions
C760 – 90(2020) Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys
C761 – 18 Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride
C764 – 19 Specification for Mineral Fiber Loose-Fill Thermal Insulation
C765 – 97(2015) Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
C767 – 20 Test Method for Thermal Conductivity of Carbon Refractories
C769 – 15(2020)e1 Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Value of Young’s Modulus
C770 – 16(2020) Test Method for Measurement of Glass Stress—Optical Coefficient
C771 – 14(2019) Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants
C772 – 03(2019) Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
C773 – 88(2020) Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
C774 – 88(2016) Test Method for Yield Strength of Enameling Steels After Straining and Firing
C776 – 17 Specification for Sintered Uranium Dioxide Pellets for Light Water Reactors
C777 – 04(2019) Test Method for Sulfide Resistance of Ceramic Decorations on Glass
C778 – 17 Specification for Standard Sand
C779/C779M – 19 Test Method for Abrasion Resistance of Horizontal Concrete Surfaces
C780 – 20 Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
C781 – 20 Practice for Testing Graphite Materials for Gas-Cooled Nuclear Reactor Components
C782 – 13(2018) Test Method for Softness of Preformed Tape Sealants
C783 – 85(2020) Practice for Core Sampling of Graphite Electrodes
C784 – 20 Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets
C785 – 08(2015) Specification for Nuclear-Grade Aluminum Oxide Pellets
C786/C786M – 17 Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods
C787 – 20 Specification for Uranium Hexafluoride for Enrichment
C788 – 03(2015) Specification for Nuclear-Grade Uranyl Nitrate Solution or Crystals
C791 – 19 Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
C792 – 15(2020) Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
C793 – 05(2017) Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
C794 – 18 Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
C795 – 08(2018) Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
C796/C796M – 19 Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
C799 – 19 Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions
C800 – 19 Specification for Fibrous Glass Blanket Insulation (Aircraft Type)
C802 – 14 Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
C803/C803M – 18 Test Method for Penetration Resistance of Hardened Concrete
C805/C805M – 18 Test Method for Rebound Number of Hardened Concrete
C806 – 18 Test Method for Restrained Expansion of Expansive Cement Mortar
C807 – 20 Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
C808 – 75(2016) Guide for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
C809 – 19 Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and AluminumOxide-Boron Carbide Composite Pellets
C810 – 90(2016) Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry
C813 – 20 Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
C816 – 15(2020)e1 Test Method for Sulfur Content in Graphite by Combustion-Iodometric Titration Method
C821 – 14 Specification for Lime for Use with Pozzolans
C822 – 20 Terminology Relating to Concrete Pipe and Related Products
C823/C823M – 12(2017) Practice for Examination and Sampling of Hardened Concrete in Constructions
C824 – 91(2020) Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by Dilatometer Method
C825 – 19 Specification for Precast Concrete Barriers
C827/C827M – 16 Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
C828 – 11(2016) Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
C829 – 81(2015) Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method
C830 – 00(2016) Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
C831 – 18 Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
C832 – 00(2015) Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load
C833 – 17 Specification for Sintered (Uranium-Plutonium) Dioxide Pellets for Light Water Reactors
C834 – 17 Specification for Latex Sealants
C835 – 06(2020) Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C
C836/C836M – 18 Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
C837 – 09(2019) Test Method for Methylene Blue Index of Clay
C838 – 16 Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes
C839 – 82(2020) Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method
C840 – 20 Specification for Application and Finishing of Gypsum Board
C841 – 03(2018) Specification for Installation of Interior Lathing and Furring
C842 – 05(2015) Specification for Application of Interior Gypsum Plaster
C843 – 17 Specification for Application of Gypsum Veneer Plaster
C844 – 15 Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
C845/C845M – 18 Specification for Expansive Hydraulic Cement
C845/C845M-SP – 18
C845/C845M-POR – 18 Especificação padrão para Cimento hidráulico expansivo
C846 – 16 Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing
C847 – 18 Specification for Metal Lath
C848 – 88(2020) Test Method for Young’s Modulus, Shear Modulus, and Poisson’s Ratio For Ceramic Whitewares by Resonance
C849 – 88(2020) Test Method for Knoop Indentation Hardness of Ceramic Whitewares
C852/C852M – 17 Guide for Design Criteria for Plutonium Gloveboxes
C856/C856M – 20 Practice for Petrographic Examination of Hardened Concrete
C857 – 19 Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
C858 – 19 Specification for Underground Precast Concrete Utility Structures
C859 – 14b Terminology Relating to Nuclear Materials
C860 – 15(2019) Test Method for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test
C861 – 93(2020) Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
C862 – 16(2020) Practice for Preparing Refractory Concrete Specimens by Casting
C863 – 00(2016) Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
C864 – 05(2019) Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
C865 – 17 Practice for Firing Refractory Concrete Specimens
C866 – 11(2016) Test Method for Filtration Rate of Ceramic Whiteware Clays
C867 – 94(2014) Test Method for Soluble Sulfate in Ceramic Whiteware Clays (Photometric Method)
C869/C869M – 11(2016) Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete
C870 – 11(2017) Practice for Conditioning of Thermal Insulating Materials
C871 – 18 Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
C872 – 10(2015) Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces
C873/C873M – 15 Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
C874 – 20 Test Method for Rotary Slag Testing of Refractory Materials
C876 – 15 Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
C877 – 16 Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
C877M – 16 Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)
C878/C878M – 14a Test Method for Restrained Expansion of Shrinkage-Compensating Concrete
C879 – 03(2019) Test Methods for Release Papers Used with Preformed Tape Sealants
C880/C880M – 18 Test Method for Flexural Strength of Dimension Stone
C881/C881M – 20a Specification for Epoxy-Resin-Base Bonding Systems for Concrete
C882/C882M – 20 Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
C884/C884M – 16 Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay
C885 – 87(2020) Test Method for Young’s Modulus of Refractory Shapes by Sonic Resonance
C886 – 98(2015) Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
C887 – 20 Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
C888 – 18 Specification for Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
C889 – 18 Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
C890 – 19 Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
C891 – 20 Practice for Installation of Underground Precast Concrete Utility Structures
C892 – 19 Specification for High-Temperature Fiber Blanket Thermal Insulation
C895 – 87(2019) Test Method for Lead and Cadmium Extracted from Glazed Ceramic Tile
C896 – 20e1 Terminology Relating to Clay Products
C897 – 15(2020) Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters
C898/C898M – 09(2017) Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with Separate Wearing Course
C899 – 79(2018) Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials
C900 – 19 Test Method for Pullout Strength of Hardened Concrete
C901 – 18 Specification for Prefabricated Masonry Panels
C902 – 20 Specification for Pedestrian and Light Traffic Paving Brick
C903 – 15(2020) Practice for Preparing Refractory Specimens by Cold Gunning
C904 – 01(2018) Terminology Relating to Chemical-Resistant Nonmetallic Materials
C905 – 01(2012) Test Methods for Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C907 – 17(2018) Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
C908 – 15 Test Method for Yield Strength of Preformed Tape Sealants
C909 – 18 Practice for Dimensions of a Modular Series of Refractory Brick and Shapes
C910 – 16 Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
C911 – 19 Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses
C912 – 17 Practice for Designing a Process for Cleaning Technical Glasses
C913 – 18 Specification for Precast Concrete Water and Wastewater Structures
C914 – 09(2015) Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
C915 – 79(2018) Specification for Precast Reinforced Concrete Crib Wall Members
C916 – 20 Specification for Adhesives for Duct Thermal Insulation
C917/C917M – 18 Test Method for Evaluation of Variability of Cement from a Single Source Based on Strength
C918/C918M – 20 Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
C919 – 19 Practice for Use of Sealants in Acoustical Applications
C920 – 18 Specification for Elastomeric Joint Sealants
C921 – 10(2015) Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
C922 – 14 Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets
C923/C923M – 20 Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals
C925 – 09(2019) Guide for Precision Electroformed Wet Sieve Analysis of Nonplastic Ceramic Powders
C926 – 20b Specification for Application of Portland Cement-Based Plaster
C927 – 80(2019)e1 Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels
C928/C928M – 20a Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
C929 – 14(2019) Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel
C930 – 19 Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories
C932 – 06(2019) Specification for Surface-Applied Bonding Compounds for Exterior Plastering
C933 – 18 Specification for Welded Wire Lath
C935 – 19 Specification for General Requirements for Prestressed Concrete Poles Statically Cast
C936/C936M – 20 Specification for Solid Concrete Interlocking Paving Units
C937 – 16 Specification for Grout Fluidifier for Preplaced-Aggregate Concrete
C938 – 19 Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete
C939/C939M – 16a Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
C940 – 16 Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
C941 – 16 Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory
C942 – 15 Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
C943 – 17 Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
C944/C944M – 19 Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
C945 – 05(2017) Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
C946 – 18 Practice for Construction of Dry-Stacked, Surface-Bonded Walls
C947 – 03(2016) Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
C948 – 81(2016) Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete
C949 – 80(2020) Test Method for Porosity in Vitreous Whitewares by Dye Penetration
C950/C950M – 08(2017) Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
C953 – 17 Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
C954 – 18 Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
C955 – 18e1 Specification for Cold-Formed Steel Structural Framing Members
C956 – 04(2019) Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete
C957/C957M – 17 Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
C958 – 92(2014) Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation
C961 – 15 Test Method for Lap Shear Strength of Sealants
C963 – 00(2017) Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets
C964 – 20 Guide for Lock-Strip Gasket Glazing
C965 – 96(2017) Practice for Measuring Viscosity of Glass Above the Softening Point
C967 – 20 Specification for Uranium Ore Concentrate
C968 – 19 Test Methods for Analysis of Sintered Gadolinium Oxide-Uranium Dioxide Pellets
C969M – 19 Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
C969 – 19 Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
C972 – 18 Test Method for Compression-Recovery of Tape Sealant
C973 – 87(2020) Practice for Preparing Test Specimens from Basic Refractory Gunning Products by Pressing
C974 – 87(2020) Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting
C975 – 87(2020) Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
C977 – 18 Specification for Quicklime and Hydrated Lime for Soil Stabilization
C978 – 04(2019) Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures
C979/C979M – 16 Specification for Pigments for Integrally Colored Concrete
C980 – 17 Specification for Industrial Chimney Lining Brick
C981 – 20 Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks
C985M – 19 Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe (Metric)
C985 – 19 Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
C987 – 10(2019) Test Method for Vapor Attack on Refractories for Furnace Superstructures
C989/C989M – 18a Specification for Slag Cement for Use in Concrete and Mortars
C989/C989M-SP – 18a Especificación de estándar para cemento de escoria para uso en hormigón y morteros
C989/C989M-POR – 18a Especificação padrão para Cimento de escórias para uso em concreto e argamassas
C990 – 09(2019) Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
C990M – 09(2019) Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)
C991 – 16 Specification for Flexible Fibrous Glass Insulation for Metal Buildings
C992 – 20a Specification for Boron-based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks in Pool Environment
C993 – 97(2012) Guide for In-Plant Performance Evaluation of Automatic Pedestrian SNM Monitors
C996 – 20 Specification for Uranium Hexafluoride Enriched to Less Than 5 % 235U
C998 – 17 Practice for Sampling Surface Soil for Radionuclides
C999 – 17 Practice for Soil Sample Preparation for the Determination of Radionuclides

Standar ASTM C1000-C1999

C1000 – 19 Test Method for Radiochemical Determination of Uranium Isotopes in Soil by Alpha Spectrometry
C1001 – 19 Test Method for Radiochemical Determination of Plutonium in Soil by Alpha Spectroscopy
C1002 – 20 Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
C1005 – 20 Specification for Reference Masses and Devices for Determining Mass and Volume for Use in Physical Testing of Hydraulic Cements
C1006/C1006M – 20a Test Method for Splitting Tensile Strength of Masonry Units
C1007 – 20 Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
C1009 – 13a Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry
C1012/C1012M – 18b Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
C1014 – 17 Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
C1015 – 17 Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
C1016 – 14 Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material
C1017/C1017M – 13e1 Specification for Chemical Admixtures for Use in Producing Flowing Concrete
C1017/C1017M-SP – 13e1 Especificación Normalizada para Aditivos Químicos para Uso en la Producción de Concreto Fluido
C1017/C1017M-POR – 13e1 Especificação padrão para Aditivos químicos para uso na produção de concreto fluido
C1019 – 20 Test Method for Sampling and Testing Grout for Masonry
C1021 – 08(2019) Practice for Laboratories Engaged in Testing of Building Sealants
C1022 – 17 Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate
C1023 – 10(2018) Practice for Labeling Ceramic Art Materials for Chronic Adverse Health Hazards
C1025 – 15(2020) Test Method for Modulus of Rupture in Bending of Electrode Graphite
C1026 – 13(2018) Test Method for Measuring the Resistance of Ceramic and Glass Tile to Freeze-Thaw Cycling
C1027 – 19 Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile
C1029 – 20 Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
C1030 – 10(2018) Test Method for Determination of Plutonium Isotopic Composition by Gamma-Ray Spectrometry
C1031 – 11(2016) Specification for Nuclear-Grade Aluminum Oxide Powder
C1032 – 18 Specification for Woven Wire Plaster Base
C1036 – 16 Specification for Flat Glass
C1037 – 16 Practice for Inspection of Underground Precast Concrete Utility Structures
C1038/C1038M – 19 Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
C1039 – 85(2020)e1 Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
C1040/C1040M – 16a Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods
C1040/C1040M-RU-RU – 16a Стандартные методы испытания для определения плотности уложенного в конструкцию незатвердевшего и затвердевшего бетона, включая бетон, уплотненный катком, с использованием ядерных методов
C1043 – 19 Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources
C1044 – 16(2020) Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode
C1045 – 19 Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
C1046 – 95(2013) Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
C1047 – 19 Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
C1048 – 18 Specification for Heat-Strengthened and Fully Tempered Flat Glass
C1052 – 20 Practice for Bulk Sampling of Liquid Uranium Hexafluoride
C1054 – 18 Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
C1055 – 20 Guide for Heated System Surface Conditions that Produce Contact Burn Injuries
C1057 – 17 Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer
C1058/C1058M – 10(2015) Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
C1059/C1059M – 13 Specification for Latex Agents for Bonding Fresh To Hardened Concrete
C1060 – 11a(2015) Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
C1062 – 00(2014) Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities
C1063 – 20a Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
C1064/C1064M – 17 Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
C1064/C1064M-SP – 17 Método de prueba estándar para la determinación de la temperatura del hormigón de cemento hidráulico recién mezclado
C1064/C1064M-POR – 17 Método de ensaio padrão para Temperatura de concreto de cimento hidráulico recém misturado
C1065 – 08(2015) Specification for Nuclear-Grade Zirconium Oxide Powder
C1066 – 09(2015) Specification for Nuclear Grade Zirconium Oxide Pellets
C1067 – 20 Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials
C1068 – 15 Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
C1069 – 09(2014) Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
C1070 – 01(2020) Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
C1071 – 19 Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
C1072 – 19 Test Methods for Measurement of Masonry Flexural Bond Strength
C1073 – 18 Test Method for Hydraulic Activity of Slag Cement by Reaction with Alkali
C1074 – 19e1 Practice for Estimating Concrete Strength by the Maturity Method
C1075 – 17 Practices for Sampling Uranium-Ore Concentrate
C1076 – 09(2015) Specification for Nuclear Grade Hafnium Oxide Pellets
C1077 – 17 Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
C1077-SP – 17 Práctica estándar para los organismos de pruebas de hormigón y agregados de hormigón para uso en la construcción y criterios de evaluación de los organismos de pruebas
C1077-POR – 17 Prática padrão para Centros que ensaiem concreto e agregados de concreto para uso em construções e critérios para avaliação de centros de ensaios
C1083 – 06(2020)e1 Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
C1084 – 19 Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete
C1086 – 20 Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation
C1087 – 16 Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
C1088 – 20 Specification for Thin Veneer Brick Units Made From Clay or Shale
C1089 – 19 Specification for Spun Cast Prestressed Concrete Poles
C1090/C1090M – 15 Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout
C1091 – 03a(2018) Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
C1093 – 19 Practice for Accreditation of Testing Agencies for Masonry
C1096/C1096M – 07(2019) Test Method for Determination of Wood Fiber in Asbestos Cement
C1097 – 19 Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Paving Mixtures
C1098 – 08(2015) Specification for Nuclear-Grade Hafnium Oxide Powder
C1099 – 07(2019) Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
C1101/C1101M – 06(2017) Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation
C1103M – 19 Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
C1103 – 19 Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
C1104/C1104M – 19 Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
C1105 – 08a(2016) Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
C1106 – 00(2012) Test Methods for Chemical Resistance and Physical Properties of Carbon Brick
C1107/C1107M – 20 Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
C1108 – 17 Test Method for Plutonium by Controlled-Potential Coulometry
C1109 – 10(2015) Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectroscopy
C1111 – 10(2020) Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy
C1113/C1113M – 09(2019) Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
C1114 – 06(2019) Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
C1115 – 17 Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
C1116/C1116M – 10a(2015) Specification for Fiber-Reinforced Concrete
C1119/C1119M – 90(2015) Test Method for Vacuum Drainage of Asbestos-Cement Mixes
C1120/C1120M – 98(2019) Test Method for Wash Test of Asbestos
C1121/C1121M – 04(2015) Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos
C1122/C1122M – 90(2015) Test Method for Wet Volume of Asbestos
C1123/C1123M – 90(2015) Test Method for Compressibility and Recovery of Asbestos
C1124/C1124M – 90(2015) Test Method for Kerosene Retention of Asbestos
C1125 – 89(2015) Test Method for Penetration Index of Asbestos
C1126 – 19 Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
C1127/C1127M – 15 Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
C1128 – 18 Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials
C1129 – 17 Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
C1130 – 17 Practice for Calibration of Thin Heat Flux Transducers
C1131 – 20 Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
C1133/C1133M – 10(2018) Test Method for Nondestructive Assay of Special Nuclear Material in Low-Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning
C1134 – 17 Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
C1135 – 19 Test Method for Determining Tensile Adhesion Properties of Structural Sealants
C1136 – 17a Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
C1138M – 19 Test Method for Abrasion Resistance of Concrete (Underwater Method)
C1140/C1140M – 11(2019) Practice for Preparing and Testing Specimens from Shotcrete Test Panels
C1141/C1141M – 15 Specification for Admixtures for Shotcrete
C1145 – 19 Terminology of Advanced Ceramics
C1146 – 09(2018) Guide for Prefabricated Panel and H-bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air
C1147 – 14 Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
C1149 – 17 Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
C1152/C1152M – 20 Test Method for Acid-Soluble Chloride in Mortar and Concrete
C1153 – 10(2015) Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
C1154 – 06(2016) Terminology for Non-Asbestos Fiber-Reinforced Cement Products
C1155 – 95(2013) Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
C1156 – 18 Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
C1157/C1157M – 20 Performance Specification for Hydraulic Cement
C1157/C1157M-SP – 20 Especificación de desempeño estándar para cemento hidráulico
C1157/C1157M-POR – 20 Especificação de desempenho padrão para Cimento hidráulico
C1159 – 98(2012) Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete
C1160 – 97(2012) Specification for Chemical-Resistant Carbon Brick
C1161 – 18 Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
C1162/C1162M – 90(2015) Test Method for Loose Density of Asbestos
C1163 – 14 Practice for Mounting Actinides for Alpha Spectrometry Using Neodymium Fluoride
C1164 – 14 Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
C1165 – 17 Test Method for Determining Plutonium by Controlled-Potential Coulometry in H2SO4 at a Platinum Working Electrode
C1166 – 06(2016) Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
C1167 – 11(2017) Specification for Clay Roof Tiles
C1168 – 15 Practice for Preparation and Dissolution of Plutonium Materials for Analysis
C1169 – 97(2012) Guide for Laboratory Evaluation of Automatic Pedestrian SNM Monitor Performance
C1170/C1170M – 20 Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
C1171 – 16 Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
C1172 – 19 Specification for Laminated Architectural Flat Glass
C1173 – 18 Specification for Flexible Transition Couplings for Underground Piping Systems
C1174 – 20 Guide for Evaluation of Long-Term Behavior of Materials Used in Engineered Barrier Systems (EBS) for Geological Disposal of High-Level Radioactive Waste
C1176/C1176M – 20 Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
C1177/C1177M – 17 Specification for Glass Mat Gypsum Substrate for Use as Sheathing
C1178/C1178M – 18 Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel
C1179 – 15 Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
C1180 – 19 Terminology of Mortar and Grout for Unit Masonry
C1181/C1181M – 17 Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
C1182 – 09(2019) Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
C1183/C1183M – 13(2018) Test Method for Extrusion Rate of Elastomeric Sealants
C1184 – 18e1 Specification for Structural Silicone Sealants
C1185 – 08(2016) Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
C1186 – 08(2016) Specification for Flat Fiber-Cement Sheets
C1187 – 20a Guide for Establishing Surveillance Test Program for Boron-based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks in Pool Environment
C1189 – 11(2018) Guide to Procedures for Calibrating Automatic Pedestrian SNM Monitors
C1190 – 18 Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick
C1193 – 16 Guide for Use of Joint Sealants
C1194 – 19 Test Method for Compressive Strength of Architectural Cast Stone
C1195 – 19a Test Method for Absorption of Architectural Cast Stone
C1196 – 20 Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements
C1197 – 20 Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
C1198 – 20 Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Sonic Resonance
C1199 – 14 Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
C1201/C1201M – 20 Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
C1202 – 19 Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration
C1203 – 04(2019) Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
C1204 – 14 Test Method for Uranium in Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration
C1205 – 07(2012) Test Method for The Radiochemical Determination of Americium-241 in Soil by Alpha Spectrometry
C1207 – 10(2018) Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting
C1208/C1208M – 18 Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
C1210 – 18 Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
C1211 – 18 Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
C1214M – 19 Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
C1214 – 19 Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
C1215 – 18 Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
C1216/C1216M – 13 Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
C1216/C1216M-RU-RU – 13 Стандартный метод испытания на адгезию и когезию однокомпонентных эластомерных герметиков с испаряющимся растворителем
C1217 – 00(2020) Guide for Design of Equipment for Processing Nuclear and Radioactive Materials
C1218/C1218M – 20 Test Method for Water-Soluble Chloride in Mortar and Concrete
C1218/C1218M-SP – 20 Método de prueba estándar para cloruro soluble en agua en mortero y hormigón
C1218/C1218M-POR – 20 Método de ensaio padrão para Cloreto solúvel em água em argamassa e concreto
C1220 – 17 Test Method for Static Leaching of Monolithic Waste Forms for Disposal of Radioactive Waste
C1221 – 10(2018) Test Method for Nondestructive Analysis of Special Nuclear Materials in Homogeneous Solutions by Gamma-Ray Spectrometry
C1222 – 19a Practice for Evaluation of Laboratories Testing Hydraulic Cement
C1223 – 19 Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories
C1224 – 15(2020) Specification for Reflective Insulation for Building Applications
C1225 – 08(2016) Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates
C1227 – 20 Specification for Precast Concrete Septic Tanks
C1228 – 96(2015) Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
C1229 – 94(2015) Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test)
C1230 – 96(2015) Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
C1231/C1231M – 15 Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens
C1231/C1231M-SP – 15 Práctica estándar para el uso de cabezales sin adhesión en la determinación de la resistencia a la compresión de especímenes cilíndricos de hormigón endurecido
C1231/C1231M-POR – 15 Prática padrão para Uso de tampas não acopladas na determinação de resistência à compressão de espécimes de concreto cilíndrico endurecido
C1232 – 20 Terminology for Masonry
C1233 – 15 Practice for Determining Equivalent Boron Contents of Nuclear Materials
C1234 – 11(2019) Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
C1238 – 97(2012) Guide for Installation of Walk-Through Metal Detectors
C1239 – 13(2018) Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
C1240 – 20 Specification for Silica Fume Used in Cementitious Mixtures
C1240-SP – 20 Especificación de estándar para humo de sílice utilizado en mezclas cementantes
C1240-POR – 20 Especificação padrão para Sílica ativa usada em misturas cimentícias
C1241 – 14 Test Method for Volume Shrinkage of Latex Sealants During Cure
C1242 – 20 Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems
C1243 – 93(2015)e2 Test Method for Relative Resistance to Deep Abrasive Wear of Unglazed Ceramic Tile by Rotating Disc
C1244/C1244M – 20 Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
C1246 – 17 Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
C1247 – 20 Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
C1248 – 18 Test Method for Staining of Porous Substrate by Joint Sealants
C1249 – 18 Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
C1252 – 17 Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
C1253 – 14(2019) Test Method for Determining the Outgassing Potential of Sealant Backing
C1254 – 18 Test Method for Determination of Uranium in Mineral Acids by X-Ray Fluorescence
C1255 – 18 Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
C1256 – 93(2019) Practice for Interpreting Glass Fracture Surface Features
C1257 – 15 Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
C1257-RU-RU – 15 Стандартный метод испытания на ускоренное старение в атмосферных условиях герметиков с испаряющимся растворителем
C1258 – 19 Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
C1259 – 15 Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
C1260 – 14 Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
C1261 – 13(2017)e1 Specification for Firebox Brick for Residential Fireplaces
C1262/C1262M – 18 Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
C1263 – 95(2015) Test Method for Thermal Integrity of Flexible Water Vapor Retarders
C1264 – 19 Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products
C1265 – 17 Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
C1266 – 17 Test Method for Flow Characteristics of Preformed Tape Sealants
C1267 – 17 Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium
C1268 – 15 Test Method for Quantitative Determination of 241Am in Plutonium by Gamma-Ray Spectrometry
C1269 – 97(2012) Practice for Adjusting the Operational Sensitivity Setting of In-Plant Walk-Through Metal Detectors
C1270 – 97(2012) Practice for Detection Sensitivity Mapping of In-Plant Walk-Through Metal Detectors
C1271 – 99(2020) Test Method for X-ray Spectrometric Analysis of Lime and Limestone
C1272 – 17 Specification for Heavy Vehicular Paving Brick
C1273 – 18 Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
C1274 – 12(2020) Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
C1275 – 18 Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
C1277 – 20 Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
C1278/C1278M – 17 Specification for Fiber-Reinforced Gypsum Panel
C1279 – 13(2019) Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass
C1280 – 18 Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing
C1281 – 16 Specification for Preformed Tape Sealants for Glazing Applications
C1283 – 15 Practice for Installing Clay Flue Lining
C1284 – 18 Practice for Electrodeposition of the Actinides for Alpha Spectrometry
C1285 – 14 Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT)
C1287 – 18 Test Method for Determination of Impurities in Nuclear Grade Uranium Compounds by Inductively Coupled Plasma Mass Spectrometry
C1288 – 17 Specification for Fiber-Cement Interior Substrate Sheets
C1289 – 20 Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
C1290 – 16 Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
C1291 – 18 Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics
C1292 – 16 Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
C1293 – 20a Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
C1294 – 20 Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
C1295 – 15 Test Method for Gamma Energy Emission from Fission and Decay Products in Uranium Hexafluoride and Uranyl Nitrate Solution
C1297 – 18 Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
C1298 – 95(2013) Guide for Design and Construction of Brick Liners for Industrial Chimneys
C1300 – 95(2020) Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
C1301 – 95(2014) Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
C1303/C1303M – 19 Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
C1304 – 18 Test Method for Assessing the Odor Emission of Thermal Insulation Materials
C1305/C1305M – 16 Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
C1306/C1306M – 08(2016)e1 Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
C1307 – 15 Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry
C1308 – 08(2017) Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive, Fractional Leaching from Cylindrical Waste Forms
C1309 – 97(2012) Practice for Performance Evaluation of In-Plant Walk-Through Metal Detectors
C1311 – 14 Specification for Solvent Release Sealants
C1312 – 97(2012) Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory
C1313/C1313M – 13(2019) Specification for Sheet Radiant Barriers for Building Construction Applications
C1314 – 18 Test Method for Compressive Strength of Masonry Prisms
C1315 – 19 Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
C1316 – 08(2017) Test Method for Nondestructive Assay of Nuclear Material in Scrap and Waste by Passive-Active Neutron Counting Using 252Cf Shuffler
C1318 – 15a(2020) Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
C1319 – 17 Specification for Concrete Grid Paving Units
C1320 – 20 Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction
C1321 – 15(2020) Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction
C1322 – 15(2019) Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
C1323 – 16 Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
C1324 – 20a Test Method for Examination and Analysis of Hardened Masonry Mortar
C1325 – 19 Specification for Fiber-Mat Reinforced Cementitious Backer Units
C1325-SP – 19 Especificación de estándar para placas de cemento reforzadas con malla de fibra
C1325-POR – 19 Especificação padrão para Placas cimentícias reforçadas com tecido de fibras
C1326 – 13(2018) Test Method for Knoop Indentation Hardness of Advanced Ceramics
C1327 – 15(2019) Test Method for Vickers Indentation Hardness of Advanced Ceramics
C1328/C1328M – 19 Specification for Plastic (Stucco) Cement
C1329/C1329M – 16a Specification for Mortar Cement
C1330 – 18 Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
C1331 – 18 Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method
C1332 – 18 Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique
C1334 – 05(2016)e1 Specification for Uranium Oxides with a 235U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide
C1335 – 12(2017) Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
C1337 – 17 Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
C1338 – 19 Test Method for Determining Fungi Resistance of Insulation Materials and Facings
C1339/C1339M – 18 Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts
C1340/C1340M – 10(2015) Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program
C1341 – 13(2018) Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
C1343 – 16 Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence
C1346 – 19 Practice for Dissolution of UF6 from P-10 Tubes
C1347 – 08(2014)e1 Practice for Preparation and Dissolution of Uranium Materials for Analysis
C1349 – 17 Specification for Architectural Flat Glass Clad Polycarbonate
C1350M – 96(2019) Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 108 Pa•s to Approximately 1013 Pa•s) by Beam Bending (Metric)
C1351M – 96(2017) Test Method for Measurement of Viscosity of Glass Between 104 Pa•s and 108 Pa•s by Viscous Compression of a Solid Right Cylinder [Metric]
C1352/C1352M – 15 Test Method for Flexural Modulus of Elasticity of Dimension Stone
C1353/C1353M – 20e1 Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser
C1354/C1354M – 15 Test Method for Strength of Individual Stone Anchorages in Dimension Stone
C1355/C1355M – 96(2020) Specification for Glass Fiber Reinforced Gypsum Composites
C1356 – 07(2020) Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
C1358 – 18 Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Ambient Temperatures
C1359 – 18e1 Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross Section Test Specimens at Elevated Temperatures
C1360 – 17 Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
C1361 – 10(2019) Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
C1363 – 19 Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
C1364 – 19 Specification for Architectural Cast Stone
C1365 – 18 Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
C1366 – 19 Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
C1367 – 19 Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
C1368 – 18 Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Rate Strength Testing at Ambient Temperature
C1369 – 19 Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
C1370 – 00(2012) Test Method for Determining Chemical Resistance of Aggregates for Use in Chemical-Resistant Sulfur Polymer Cement Concrete and Other Chemical-Resistant Polymer Concretes
C1371 – 15 Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
C1372 – 17 Specification for Dry-Cast Segmental Retaining Wall Units
C1373/C1373M – 11(2017) Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions
C1374 – 18 Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
C1375 – 00(2020) Guide for Substrates Used in Testing Building Seals and Sealants
C1376 – 15 Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass
C1378 – 20 Test Method for Determination of Resistance to Staining
C1381/C1381M – 97(2018) Specification for Molded Glass Fiber Reinforced Gypsum Parts
C1382 – 16 Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
C1383 – 15 Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
C1384 – 18e1 Specification for Admixtures for Masonry Mortars
C1385/C1385M – 10(2017) Practice for Sampling Materials for Shotcrete
C1387 – 14 Guide for the Determination of Technetium-99 in Soil
C1392 – 20 Guide for Evaluating Failure of Structural Sealant Glazing
C1393 – 19 Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
C1394 – 20 Guide for In-Situ Structural Silicone Glazing Evaluation
C1396/C1396M – 17 Specification for Gypsum Board
C1397 – 13(2019) Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage
C1399/C1399M – 10(2015) Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
C1400 – 11(2017) Guide for Reduction of Efflorescence Potential in New Masonry Walls
C1401 – 14 Guide for Structural Sealant Glazing
C1402 – 17 Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples
C1403 – 15 Test Method for Rate of Water Absorption of Masonry Mortars
C1405 – 20a Specification for Glazed Brick (Single Fired, Brick Units)
C1407 – 98(2016) Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
C1408 – 16 Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method
C1409 – 12(2018) Guide for Measuring and Estimating Quantities of Insulated Piping and Components
C1410 – 17 Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
C1411 – 20 Practice for The Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis
C1413 – 18 Test Method for Isotopic Analysis of Hydrolyzed Uranium Hexafluoride and Uranyl Nitrate Solutions by Thermal Ionization Mass Spectrometry
C1415 – 18 Test Method for 238Pu Isotopic Abundance By Alpha Spectrometry
C1417 – 19 Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
C1417M – 19 Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
C1419 – 14(2020) Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young’s Modulus
C1421 – 18 Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
C1422/C1422M – 20a Specification for Chemically Strengthened Flat Glass
C1423 – 16 Guide for Selecting Jacketing Materials for Thermal Insulation
C1424 – 15(2019) Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
C1425 – 19 Test Method for Interlaminar Shear Strength of 1D and 2D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
C1426 – 14(2020) Practices for Verification and Calibration of Polarimeters
C1427 – 16 Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
C1428 – 18 Test Method for Isotopic Analysis of Uranium Hexafluoride by Single–Standard Gas Source Multiple Collector Mass Spectrometer Method
C1429 – 99(2014) Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
C1430 – 18 Test Method for Determination of Uranium, Oxygen to Uranium (O/U), and Oxygen to Metal (O/M) in Sintered Uranium Dioxide and Gadolinia-Uranium Dioxide Pellets by Atmospheric Equilibration
C1431 – 99(2018) Guide for Corrosion Testing of Aluminum-Based Spent Nuclear Fuel in Support of Repository Disposal
C1432 – 15 Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
C1433M – 20 Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)
C1433 – 20 Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
C1435/C1435M – 20 Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer
C1436 – 13 Specification for Materials for Shotcrete
C1437 – 20 Test Method for Flow of Hydraulic Cement Mortar
C1438 – 13(2017) Specification for Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar
C1439 – 19 Test Methods for Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar
C1440 – 17 Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
C1441 – 13 Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
C1441-RUS – 13 Стандартный метод анализа холодильного агента 114 и другихуглеродсодержащих и фторсодержащих соединений в гексафториде урана с помощью инфракрасной спектроскопии с Фурье-преобразованием (ИКСФП)
C1442 – 14 Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
C1443 – 99(2016) Specification for Glasses, Portlight, Circular, Fully Tempered
C1445 – 13(2018) Test Method for Measuring Consistency of Castable Refractory Using a Flow Table
C1446 – 19 Test Method for Measuring Consistency of Self-Flowing Castable Refractories
C1447/C1447M – 04(2019) Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
C1448/C1448M – 05(2019) Specification for Non-Asbestos Fiber-Cement Conduit
C1449/C1449M – 05a(2019) Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
C1450/C1450M – 04(2019) Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe
C1451 – 18 Practice for Determining Variability of Concrete-Making Materials From a Single Source
C1453 – 19 Test Method for the Determination of Uranium by Ignition and the Oxygen to Uranium (O/U) Atomic Ratio of Nuclear Grade Uranium Dioxide Powders and Pellets
C1455 – 14e1 Test Method for Nondestructive Assay of Special Nuclear Material Holdup Using Gamma-Ray Spectroscopic Methods
C1456 – 13(2018) Test Method for Determination of Uranium or Gadolinium (or both) in Gadolinium Oxide-Uranium Oxide Pellets or by X-Ray Fluorescence (XRF)
C1457 – 18 Test Method for Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction
C1458 – 16 Test Method for Nondestructive Assay of Plutonium, Tritium and 241Am by Calorimetric Assay
C1459 – 04(2019) Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems
C1460 – 20 Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground
C1461 – 08(2017) Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use
C1462 – 00(2013) Specification for Uranium Metal Enriched to More than 15 % and Less Than 20 % 235U
C1463 – 19 Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis
C1464 – 16 Specification for Bent Glass
C1465 – 08(2019) Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
C1466 – 00(2020) Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted From Ceramic Foodware
C1467/C1467M – 00(2016) Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts
C1468 – 19a Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
C1469 – 10(2015) Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
C1470 – 20 Guide for Testing the Thermal Properties of Advanced Ceramics
C1471/C1471M – 05(2014)e1 Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
C1472 – 16e1 Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
C1473 – 19 Test Method for Radiochemical Determination of Uranium Isotopes in Urine by Alpha Spectrometry
C1474 – 19 Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry
C1475 – 17 Guide for Determination of Neptunium-237 in Soil
C1477 – 19 Test Method for Isotopic Abundance Analysis of Uranium Hexafluoride and Uranyl Nitrate Solutions by Multi-Collector, Inductively Coupled Plasma-Mass Spectrometry
C1478/C1478M – 20 Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals
C1479 – 16(2021) Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
C1479M – 16(2021) Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric)
C1480/C1480M – 07(2012) Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application
C1481 – 12(2017) Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
C1482 – 17 Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
C1483/C1483M – 17 Specification for Exterior Solar Radiation Control Coatings on Buildings
C1484 – 10(2018) Specification for Vacuum Insulation Panels
C1485 – 19 Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source
C1486 – 18 Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings
C1487 – 19 Guide for Remedying Structural Silicone Glazing
C1489 – 15 Specification for Lime Putty for Structural Purposes
C1490 – 14 Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel
C1491 – 19 Specification for Concrete Roof Pavers
C1492 – 03(2016) Specification for Concrete Roof Tile
C1493 – 19 Test Method for Non-Destructive Assay of Nuclear Material in Waste by Passive and Active Neutron Counting Using a Differential Die-Away System
C1494 – 13(2018) Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder
C1495 – 16 Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
C1496 – 18 Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades
C1497 – 16 Specification for Cellulosic Fiber Stabilized Thermal Insulation
C1498 – 04a(2016) Test Method for Hygroscopic Sorption Isotherms of Building Materials
C1499 – 19 Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
C1500 – 08(2017) Test Method for Nondestructive Assay of Plutonium by Passive Neutron Multiplicity Counting
C1501 – 19 Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
C1502 – 16 Test Method for Determination of Total Chlorine and Fluorine in Uranium Dioxide and Gadolinium Oxide
C1503 – 18 Specification for Silvered Flat Glass Mirror
C1504 – 20 Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
C1504M – 20 Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
C1505 – 15 Test Method for Determination of Breaking Strength and Modulus of Rupture of Ceramic Tiles and Glass Tiles by Three-Point Loading
C1506 – 17 Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
C1507 – 12 Test Method for Radiochemical Determination of Strontium-90 in Soil
C1508 – 18 Test Method for Determination of Bromine and Chlorine in UF6 and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy
C1510 – 01(2020) Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
C1511 – 15 Test Method for Determining the Water Retention (Repellency) Characteristics of Fibrous Glass Insulation (Aircraft Type)
C1512 – 10(2020) Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
C1513 – 18 Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
C1514 – 08(2017) Test Method for Measurement of 235U Fraction Using Enrichment Meter Principle
C1515 – 20 Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing
C1516 – 05(2017) Practice for Application of Direct-Applied Exterior Finish Systems
C1517 – 16 Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy
C1518 – 16 Specification for Precured Elastomeric Silicone Joint Sealants
C1519 – 10(2017) Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
C1520 – 20 Guide for Paintability of Latex Sealants
C1521 – 19(2020) Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
C1522 – 05(2013) Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes
C1523 – 17 Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
C1524 – 19 Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)
C1525 – 18 Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
C1526 – 19 Specification for Serpentine Dimension Stone
C1527/C1527M – 11(2018) Specification for Travertine Dimension Stone
C1528/C1528M – 20 Guide for Selection of Dimension Stone
C1529 – 19 Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses
C1530/C1530M – 04(2019) Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses
C1531 – 16 Test Methods for In Situ Measurement of Masonry Mortar Joint Shear Strength Index
C1532/C1532M – 20 Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction
C1533 – 15 Guide for General Design Considerations for Hot Cell Equipment
C1534 – 20a Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems
C1535 – 05(2017) Practice for Application of Exterior Insulation and Finish Systems Class PI
C1536 – 19 Test Method for Measuring the Yield for Aerosol Foam Sealants
C1539 – 08(2014) Test Method for Determination of Technetium-99 in Uranium Hexafluoride by Liquid Scintillation Counting
C1540 – 20 Specification for Heavy-Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
C1541 – 12(2017) Specification for Shielded Transition Couplings Using Flexible Polyvinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings
C1542/C1542M – 19 Test Method for Measuring Length of Concrete Cores
C1545 – 02(2020) Practice for Dispersing Pigments and Other Materials Into Water-Based Suspensions With High Intensity Mixer
C1546 – 19 Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems
C1547 – 02(2018) Classification for Fusion-Cast Refractory Blocks and Shapes
C1548 – 02(2020) Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio of Refractory Materials by Impulse Excitation of Vibration
C1549 – 16 Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
C1550 – 20 Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
C1552 – 16 Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
C1553 – 16 Guide for Drying Behavior of Spent Nuclear Fuel
C1554 – 18 Guide for Materials Handling Equipment for Hot Cells
C1556 – 11a(2016) Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
C1557 – 20 Test Method for Tensile Strength and Young’s Modulus of Fibers
C1558 – 19 Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
C1559 – 15 Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type)
C1560 – 03(2016) Test Method for Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based Composites
C1561 – 10(2016) Guide for Determination of Plutonium and Neptunium in Uranium Hexafluoride and U-Rich Matrix by Alpha Spectrometry
C1562 – 10(2018) Guide for Evaluation of Materials Used in Extended Service of Interim Spent Nuclear Fuel Dry Storage Systems
C1563 – 08(2017) Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications
C1564 – 20 Guide for Use of Silicone Sealants for Protective Glazing Systems
C1565 – 19 Test Method for Determination of Pack-Set Index of Portland and Blended Hydraulic Cements
C1567 – 13 Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
C1568 – 08(2020) Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
C1569 – 03(2016) Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Wind Tunnel Method)
C1570 – 03(2016) Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Air Permeability Method)
C1572/C1572M – 18 Guide for Dry Lead Glass and Oil-Filled Lead Glass Radiation Shielding Window Components for Remotely Operated Facilities
C1574 – 04(2018) Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation
C1576 – 05(2017) Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
C1577 – 20 Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
C1579 – 13 Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)
C1580 – 15 Test Method for Water-Soluble Sulfate in Soil
C1581/C1581M – 18a Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
C1582/C1582M – 11(2017)e1 Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete
C1583/C1583M – 20 Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
C1585 – 20 Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
C1586 – 20 Guide for Quality Assurance of Mortars
C1587/C1587M – 15 Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing
C1589/C1589M – 18 Practice for Outdoor Weathering of Construction Seals and Sealants
C1590 – 04(2014) Practice for Alternate Actinide Calibration for Inductively Coupled Plasma-Mass Spectrometry
C1594 – 11(2017) Specification for Polyimide Rigid Cellular Thermal Insulation
C1600/C1600M – 19 Specification for Rapid Hardening Hydraulic Cement
C1601 – 20 Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces
C1602/C1602M – 18 Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
C1603 – 16 Test Method for Measurement of Solids in Water
C1604/C1604M – 05(2019) Test Method for Obtaining and Testing Drilled Cores of Shotcrete
C1605 – 04(2014) Test Methods for Chemical Analysis of Ceramic Whiteware Materials Using Wavelength Dispersive X-Ray Fluorescence Spectrometry
C1606 – 10(2018) Test Method for Sampling Protocol for TCLP Testing of Container Glassware
C1607 – 12(2020) Test Method for Determination of “Microwave Safe for Reheating” for Ceramicware
C1608 – 17 Test Method for Chemical Shrinkage of Hydraulic Cement Paste
C1609/C1609M – 19a Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
C1610/C1610M – 19 Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
C1611/C1611M – 18 Test Method for Slump Flow of Self-Consolidating Concrete
C1613 – 17 Specification for Precast Concrete Grease Interceptor Tanks
C1615/C1615M – 17 Guide for Mechanical Drive Systems for Remote Operation in Hot Cell Facilities
C1616 – 07(2018) Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
C1617 – 19 Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
C1618M – 19 Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) Air Pressure (Metric)
C1618 – 19 Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) Air Pressure
C1619 – 20 Specification for Elastomeric Seals for Joining Concrete Structures
C1620 – 16e1 Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants
C1621/C1621M – 17 Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring
C1622/C1622M – 10(2016)e1 Specification for Cold-Weather Admixture Systems
C1623 – 17a Specification for Manufactured Concrete Masonry Lintels
C1624 – 05(2015) Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
C1625 – 19 Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry
C1628 – 19 Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
C1629/C1629M – 19 Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels
C1630 – 19 Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations
C1634 – 20 Specification for Concrete Facing Brick and Other Concrete Masonry Facing Units
C1635 – 16 Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
C1636 – 13 Guide for the Determination of Uranium-232 in Uranium Hexafluoride
C1637 – 13 Test Method for the Determination of Impurities in Plutonium Metal: Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis
C1638 – 06(2013) Guide for the Determination of Iodine-129 In Uranium Oxide
C1639 – 19 Specification for Fabrication Of Cellular Glass Pipe And Tubing Insulation
C1642 – 20 Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials
C1643 – 14(2020) Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants
C1644 – 06(2017) Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes
C1645 – 19 Test Method for Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units
C1646/C1646M – 16 Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete
C1647 – 20 Practice for Removal of Uranium or Plutonium, or both, for Impurity Assay in Uranium or Plutonium Materials
C1648 – 12(2018) Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass
C1649 – 14 Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated
C1650 – 14 Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated
C1651 – 11(2018) Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass
C1652/C1652M – 14 Test Method for Measuring Optical Distortion in Flat Glass Products Using Digital Photography of Grids
C1655 – 06(2016) Classification of Fireclay and High-Alumina Mortars
C1656 – 13(2018) Guide for Measuring the Reactivity of Hydraulic Refractory Castables Using Exothermic Profile
C1658/C1658M – 19e1 Specification for Glass Mat Gypsum Panels
C1660 – 10(2018) Specification for Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry
C1661 – 18 Guide for Viewing Systems for Remotely Operated Facilities
C1662 – 18 Practice for Measurement of the Glass Dissolution Rate Using the Single-Pass Flow-Through Test Method
C1663 – 18 Test Method for Measuring Waste Glass or Glass Ceramic Durability by Vapor Hydration Test
C1666/C1666M – 08(2015) Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement
C1667 – 15 Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels
C1668 – 20 Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems
C1670/C1670M – 20a Specification for Adhered Manufactured Stone Masonry Veneer Units
C1671 – 20a Practice for Qualification and Acceptance of Boron Based Metallic Neutron Absorbers for Nuclear Criticality Control for Dry Cask Storage Systems and Transportation Packaging
C1672 – 17 Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer
C1673 – 10a(2018) Terminology of C26.10 Nondestructive Assay Methods
C1674 – 16 Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
C1675 – 21 Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
C1676/C1676M – 19 Specification for Microporous Thermal Insulation
C1677 – 11a(2017) Specification for Joints for Concrete Box, Using Rubber Gaskets
C1678 – 10(2015) Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses
C1679 – 17 Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
C1681 – 18 Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
C1682 – 17 Guide for Characterization of Spent Nuclear Fuel in Support of Interim Storage, Transportation and Geologic Repository Disposal
C1683 – 10(2019) Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
C1684 – 18 Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength
C1685 – 15 Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications
C1686 – 09(2017) Practice for Installation and Testing of Reinforced Autoclaved Aerated Concrete (AAC) Units
C1688/C1688M – 14a Test Method for Density and Void Content of Freshly Mixed Pervious Concrete
C1689 – 08a(2014) Practice for Subsampling of Uranium Hexafluoride
C1691 – 11(2017) Specification for Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units
C1692 – 18 Practice for Construction and Testing of Autoclaved Aerated Concrete (AAC) Masonry
C1693 – 11(2017) Specification for Autoclaved Aerated Concrete (AAC)
C1694 – 09(2017) Specification for Reinforced Autoclaved Aerated Concrete (AAC) Elements
C1695 – 20 Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service
C1696 – 20 Guide for Industrial Thermal Insulation Systems
C1697 – 18 Specification for Blended Supplementary Cementitious Materials
C1698 – 19 Test Method for Autogenous Strain of Cement Paste and Mortar
C1699 – 09(2015) Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
C1701/C1701M – 17a Test Method for Infiltration Rate of In Place Pervious Concrete
C1702 – 17 Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
C1703 – 18 Practice for Sampling of Gaseous Uranium Hexafluoride for Enrichment
C1704/C1704M – 09a(2016) Test Method for Sampling and Testing Structural Cementitious Panels
C1705/C1705M – 09(2016) Specification for Structural Cementitious Panels
C1707 – 18 Specification for Pozzolanic Hydraulic Lime for Structural Purposes
C1708/C1708M – 19 Test Methods for Self-leveling Mortars Containing Hydraulic Cements
C1709 – 18 Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete
C1710 – 20 Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form
C1712 – 20 Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test
C1713 – 17 Specification for Mortars for the Repair of Historic Masonry
C1714/C1714M – 19a Specification for Preblended Dry Mortar Mix for Unit Masonry
C1715/C1715M – 15 Test Method for Evaluation of Water Leakage Performance of Masonry Wall Drainage Systems
C1716/C1716M – 20 Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms
C1717 – 19 Test Methods for Conducting Strength Tests of Masonry Wall Panels
C1718 – 10(2019) Test Method for Nondestructive Assay of Radioactive Material by Tomographic Gamma Scanning
C1719 – 11(2017) Test Method for Installed Precast Concrete Tanks and Accessories by the Negative Air Pressure (Vacuum) Test Prior to Backfill
C1720 – 17e1 Test Method for Determining Liquidus Temperature of Waste Glasses and Simulated Waste Glasses
C1721 – 15 Guide for Petrographic Examination of Dimension Stone
C1722 – 18 Guide for Repair and Restoration of Dimension Stone
C1723 – 16 Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
C1725 – 17 Guide for Hot Cell Specialized Support Equipment and Tools
C1726/C1726M – 10(2018) Guide for Use of Modeling for Passive Gamma Measurements
C1728 – 20b Specification for Flexible Aerogel Insulation
C1729 – 19 Specification for Aluminum Jacketing for Insulation
C1729M – 19 Specification for Aluminum Jacketing for Insulation
C1730 – 17 Test Method for Particle Size Distribution of Advanced Ceramics by X-Ray Monitoring of Gravity Sedimentation
C1731 – 16 Specification for Concrete Floor Tile
C1732 – 19 Practice for Installation of Concrete Floor Tiles
C1733 – 20 Test Method for Distribution Coefficients of Inorganic Species by Batch Method
C1735 – 17 Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation
C1737 – 16 Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
C1738/C1738M – 19 Practice for High-Shear Mixing of Hydraulic Cement Pastes
C1740 – 16 Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method
C1741 – 18 Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout
C1742 – 17 Test Method for Isotopic Analysis of Uranium Hexafluoride by Double Standard Single-Collector Gas Mass Spectrometer Method
C1743 – 19 Practice for Installation and Use of Radiant Barrier Systems (RBS) in Residential Building Construction
C1744 – 19 Practice for Installation and Use of Radiant Barrier Systems (RBS) in Commercial/Industrial Building Construction
C1745/C1745M – 18 Test Method for Measurement of Hydraulic Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices
C1746/C1746M – 19 Test Method for Measurement of Suspended Sediment Removal Efficiency of Hydrodynamic Stormwater Separators and Underground Settling Devices
C1747/C1747M – 13 Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion
C1749 – 17a Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
C1750 – 17 Guide for Development, Verification, Validation, and Documentation of Simulated High-Level Tank Waste
C1751 – 20 Guide for Sampling Radioactive Tank Waste
C1752 – 17 Guide for Measuring Physical and Rheological Properties of Radioactive Solutions, Slurries, and Sludges
C1753/C1753M – 15e1 Practice for Evaluating Early Hydration of Hydraulic Cementitious Mixtures Using Thermal Measurements
C1754/C1754M – 12 Test Method for Density and Void Content of Hardened Pervious Concrete
C1756 – 17a Guide for Comparing Seal or Sealant Behavior to Reference Photographs
C1757 – 13 Test Method for Determination of One-Point, Bulk Water Sorption of Dried Concrete
C1758/C1758M – 15 Practice for Fabricating Test Specimens with Self-Consolidating Concrete
C1760 – 12 Test Method for Bulk Electrical Conductivity of Hardened Concrete
C1761/C1761M – 17 Specification for Lightweight Aggregate for Internal Curing of Concrete
C1763 – 20 Test Method for Water Absorption by Immersion of Thermal Insulation Materials
C1764 – 20 Test Methods for Non Metallic Plaster Bases (Lath) Used With Portland Cement Based Plaster in Vertical Wall Applications
C1765 – 19 Specification for Steel Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
C1766 – 15(2019) Specification for Factory-Laminated Gypsum Panel Products
C1767 – 19 Specification for Stainless Steel Jacketing for Insulation
C1767M – 19 Specification for Stainless Steel Jacketing for Insulation
C1768/C1768M – 12(2017) Practice for Accelerated Curing of Concrete Cylinders
C1769 – 15 Practice for Analysis of Spent Nuclear Fuel to Determine Selected Isotopes and Estimate Fuel Burnup
C1770 – 13 Test Method for Determination of Loose and Tapped Bulk Density of Plutonium Oxide
C1771 – 19 Test Method for Determination of Boron, Silicon, and Technetium in Hydrolyzed Uranium Hexafluoride by Inductively Coupled Plasma—Mass Spectrometer After Removal of Uranium by Solid Phase Extraction
C1773 – 17 Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
C1774 – 13(2019) Guide for Thermal Performance Testing of Cryogenic Insulation Systems
C1775 – 14 Specification for Laminate Protective Jacket and Tape for Use over Thermal Insulation for Outdoor Applications
C1776/C1776M – 17 Specification for Wet-Cast Precast Modular Retaining Wall Units
C1777 – 20 Test Method for Rapid Determination of the Methylene Blue Value for Fine Aggregate or Mineral Filler Using a Colorimeter
C1778 – 20 Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete
C1778-RU-RU – 20 Стандартное руководство по снижению риска возникновения вредной реакции между заполнителем и щелочью в бетоне
C1780 – 20 Practice for Installation Methods for Cement-based Adhered Masonry Veneer
C1781/C1781M – 18e1 Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
C1782/C1782M – 20a Specification for Segmental Concrete Paving Slabs
C1783 – 15 Guide for Development of Specifications for Fiber Reinforced Carbon-Carbon Composite Structures for Nuclear Applications
C1784 – 20 Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products
C1785 – 17 Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
C1786 – 19 Specification for Segmental Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
C1787 – 20 Specification for Installation of Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications
C1788 – 20 Specification for Non Metallic Plaster Bases (Lath) Used With Portland Cement Based Plaster in Vertical Wall Applications
C1789 – 14(2018) Test Method for Calibration of Hand-Held Moisture Meters on Gypsum Panels
C1790 – 15 Specification for Fly Ash Facing Brick
C1791 – 16 Guide for Reduction of Efflorescence Potential in New Unit Pavement Systems
C1792 – 14 Test Method for Measurement of Mass Loss versus Time for One-Dimensional Drying of Saturated Concretes
C1793 – 15 Guide for Development of Specifications for Fiber Reinforced Silicon Carbide-Silicon Carbide Composite Structures for Nuclear Applications
C1794 – 19 Test Methods for Determination of the Water Absorption Coefficient by Partial Immersion
C1795 – 17 Test Methods for High-Temperature Characterization of Gypsum Boards and Panels
C1797 – 17 Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete
C1798/C1798M – 19 Specification for Returned Fresh Concrete for Use in a New Batch of Ready-Mixed Concrete
C1799/C1799M – 19 Guide to Dimension Stone Test Specimen Sampling and Preparation
C1800/C1800M – 16 Test Method for Determining Density of Roller-Compacted Concrete Specimens Using the Gyratory Compactor
C1802 – 20 Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
C1803 – 15 Guide for Abrasion Resistance of Mortar Surfaces Using a Rotary Platform Abraser
C1804 – 20 Specification for Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles
C1806 – 14 Test Method for Measuring the Flow Rate of Aerosol Foam Sealants
C1807 – 15 Guide for Nondestructive Assay of Special Nuclear Material (SNM) Holdup Using Passive Neutron Measurement Methods
C1809 – 20 Practice for Preparation of Specimens and Reporting of Results for Permeance Testing of Pressure Sensitive Adhesive Sealed Joints in Insulation Vapor Retarders
C1810/C1810M – 20a Guide for Comparing Performance of Concrete-Making Materials Using Mortar Mixtures
C1812/C1812M – 15e1 Practice for Design of Journal Bearing Supports to be Used in Fiber Reinforced Concrete Beam Tests
C1814/C1814M – 20 Test Method for Measurement of Hydraulic Characteristics of Stormwater Filtration Elements
C1815 – 17 Practice for Periodically Measuring and Monitoring Sealant Dimensions to Stability Following a Period of Compression or Tension
C1816 – 16 Practice for The Ion Exchange Separation of Small Volume Samples Containing Uranium, Americium, and Plutonium Prior to Isotopic Abundance and Content Analysis
C1817 – 16 Test Method for The Determination of the Oxygen to Metal (O/M) Ratio in Sintered Mixed Oxide ((U, Pu)O2) Pellets by Gravimetry
C1818 – 19 Specification for Synthetic Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
C1819 – 15 Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts
C1819-RU-RU – 15 Стандартный метод испытания для определения кольцевой прочности на растяжение трубчатых образцов из композитных материалов с матрицей из высококачественной керамики, армированных непрерывным волокном, при температуре окружающей среды с использованием эластомерной вставки
C1821/C1821M – 16(2021)e1 Practice for Installation of Underground Circular Precast Concrete Manhole Structures
C1822 – 15 Specification for Insulating Covers on Accessible Lavatory Piping
C1823/C1823M – 20 Test Method for Shear Bond Strength of Adhered Dimension Stone
C1824 – 16(2021) Test Method for Full Scale Bending Test of Spun Prestressed Concrete Bases for Tapered Steel Lighting Poles
C1825 – 19 Guide for Developing Specifications for Masonry Units
C1827 – 20 Test Method for Determination of the Air-Entraining Admixture Demand of a Cementitious Mixture
C1827-RU-RU – 20 Стандартный метод испытания для определения потребности в воздухововлекающей добавке цементирующей смеси
C1831/C1831M – 17 Guide for Gamma Radiation Shielding Performance Testing
C1832 – 16 Test Method for Determination of Uranium Isotopic Composition by the Modified Total Evaporation (MTE) Method Using a Thermal Ionization Mass Spectrometer
C1834 – 16 Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Elevated Temperatures
C1835 – 16 Classification for Fiber Reinforced Silicon Carbide-Silicon Carbide (SiC-SiC) Composite Structures
C1835-RU-RU – 16 Стандартная классификация карбидкремниевых композитов, армированных карбидкремниевым волокном (SiC-SiC)
C1836 – 16 Classification for Fiber Reinforced Carbon-Carbon Composite Structures
C1836-RU-RU – 16 Стандартная классификация армированных волокном конструкций из углерод-углеродного композитного материала, армированных волокном
C1837 – 17 Specification for Production of Dry Cast Concrete Used for Manufacturing Pipe, Box, and Precast Structures
C1838 – 16 Practice for Cleaning for 1S and 2S Bottles
C1840/C1840M – 17 Practice for Inspection and Acceptance of Installed Reinforced Concrete Culvert, Storm Drain, and Storm Sewer Pipe
C1842 – 16 Test Method for The Analysis of Boron and Silicon in Uranium Hexfluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
C1842-RU-RU – 16 Стандартный метод испытаний для анализа бора и кремния в гексафториде урана с помощью инфракрасной спектроскопии с Фурьепреобразованием (FTIR)
C1843 – 16 Test Method for Determining Moisture Content in Uranium-Ore Concentrate
C1844 – 16 Test Method for Determination of Uranium in Urine by Inductively Coupled Plasma Mass Spectrometer Following Nitric Acid Dilution
C1845 – 16 Practice for The Separation of Lanthanide Elements from Uranium Matrices Using High Pressure Ion Chromatography (HPIC) for Isotopic Analyses by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
C1846/C1846M – 19 Specification for Performance Based Manufacture of Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
C1848 – 17a Practice for Installation of High-Pressure Spray Polyurethane Foam Insulation for the Building Enclosure
C1849/C1849M – 17 Test Method for Density and Air Content (Pressure Method) of Freshly Mixed Roller-Compacted Concrete
C1849/C1849M-RU-RU – 17 Стандартный метод испытания для определения плотности и воздухосодержания (метод давления) свежеприготовленного уплотняемого катком бетона
C1850 – 17 Guide for Improved Laboratory Accelerated Tests to Predict the Weathering and for Use in Developing Protocols to Predict the Design Life of Building Sealant Systems
C1851 – 18 Practice for Determining the Extent of Cracking in a Sealant using the Difference between the Compressive and Tensile Modulus
C1852 – 20 Guide for Product Selection/Delivery Systems for Aerosol Foam Sealants and Adhesives
C1853 – 17 Test Method for The Determination of Carbon (Total) Content in Mixed Oxide ((U, Pu)O2) Sintered Pellets by Direct Combustion-Infrared Detection Method
C1854 – 17 Test Method for Determination of Hydrogen (total from all sources) in Mixed Oxide ((U, Pu)O2) Sintered Pellets by the Inert Gas Fusion Technique Followed by Thermal Conductivity Measurement
C1855 – 18 Test Method for Determination of Uranium and Plutonium Concentration in Aqueous Solutions Using Hybrid K-Edge Densitometry and X-Ray Fluorescence
C1856/C1856M – 17 Practice for Fabricating and Testing Specimens of Ultra-High Performance Concrete
C1857/C1857M – 19 Test Method for Evaluating the Adhesion (Pull-Off) Strength of Concrete Repair and Overlay Mortar
C1858 – 17a Practice for Design, Construction, and Material Requirements for Direct Hung Suspended T-bar Type Ceiling Systems Intended to Receive Gypsum Panel Products in Areas Subject to Earthquake Ground Motions
C1859 – 19 Practice for Determination of Thermal Resistance of Pneumatically Installed Loose-Fill Building Insulation (Behind Netting) for Enclosed Applications of the Building Thermal Envelope
C1860 – 20 Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
C1861 – 20 Specification for Lathing and Furring Accessories, and Fasteners, for Interior and Exterior Portland Cement-Based Plaster
C1862 – 17 Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures
C1863 – 18 Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization
C1864 – 17e1 Test Method for Determination of Solar Reflectance of Directionally Reflective Material Using Portable Solar Reflectometer
C1865 – 18 Test Method for The Determination of Carbon and Sulfur Content in Plutonium Oxide Powder by the Direct Combustion-Infrared Spectrophotometer
C1866/C1866M – 20 Specification for Ground-Glass Pozzolan for Use in Concrete
C1868 – 18 Practice for Ceramographic Preparation of UO2 and Mixed Oxide (U,Pu)O2 Pellets for Microstructural Analysis
C1869 – 18 Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites
C1870 – 18 Test Method for Determination of Impact Diameter from Falling Ball on Ceramic Tile
C1871 – 18a Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
C1872 – 18e2 Test Method for Thermogravimetric Analysis of Hydraulic Cement
C1874 – 20 Test Method for Measuring Rheological Properties of Cementitious Materials Using Coaxial Rotational Rheometer
C1875 – 18 Practice for Determination of Major and Minor Elements in Aqueous Pore Solutions of Cementitious Pastes by Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES)
C1876 – 19 Test Method for Bulk Electrical Resistivity or Bulk Conductivity of Concrete
C1877 – 19 Specification for Adhered Concrete Masonry Units
C1878 – 19 Test Method for Surface Water Resistance of Vapor Retarders for Thermal Insulation
C1880 – 19 Practice for Sampling Gaseous Uranium Hexafluoride using Alumina Pellets
C1881 – 20 Guide for Closed-Loop Recycling of Scrap Gypsum Panel Products
C1883 – 19 Practice for Sampling of Gaseous Enriched Uranium Hexafluoride
C1884 – 19 Specification for Concrete Ballast Block
C1889 – 21 Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Utility, Water, and Wastewater Structures Using AASHTO LRFD Design
C1890 – 19 Test Method for K-slump of Freshly Mixed Concrete
C1891 – 20 Test Method for Fineness of Hydraulic Cement by Air Jet Sieving at 45-µm (No. 325)
C1892/C1892M – 20a Test Methods for Strength of Anchors in Masonry
C1894 – 19 Guide for Microbially Induced Corrosion of Concrete Products
C1895 – 20 Test Method for Determination of Mohs Scratch Hardness
C1896 – 20 Specification for Joints for Concrete Arch Pipe Using Profile Rubber Gaskets
C1897 – 20 Test Methods for Measuring the Reactivity of Supplementary Cementitious Materials by Isothermal Calorimetry and Bound Water Measurements
C1898 – 20 Test Methods for Determining the Chemical Resistance of Concrete Products to Acid Attack
C1900 – 20 Practice for Weathering and Evaluation of Laminated Glass
C1902 – 20 Specification for Cellular Glass Insulation Used in Building and Roof Applications
C1903 – 21 Specification for Precast Concrete Duct Bank
C1904 – 20 Test Methods for Determination of the Effects of Biogenic Acidification on Concrete Antimicrobial Additives and/or Concrete Product

Standar ASTM seri D hingga G

Daftar Standar ASTM Internasional selanjutnya dapat dibuka pada artikel dari standarku.com yang lain.

Demikian artikel dari standarku.com mengenai Daftar standar ASTM Internasional seri C.

Mohon saran dari pembaca untuk kelengkapan isi artikel ini, silahkan saran tersebut dapat disampaikan melalui kolom komentar.

Baca artikel lain :

Sumber referensi :

https://en.wikipedia.org/wiki/List_of_ASTM_International_standards

ISO 13628-10 bonded flexible pipe ISO 13628-10 adalah Standar Internasional mengenai Industri minyak dan gas alam (migas), khususnya tentang spesifikasi pipa fleksibel berikat (bonded flexible pipe) dalam sistem produksi bawah laut. Standar versi terbaru yang…
Standar Kode Jenis Plastik Standar Kode Bahan Plastik adalah aturan standar internasional yang mengatur klasifikasi berbagai jenis plastik di dunia Plastik merupakan bahan pokok di kehidupan sehari-hari setiap manusia. Penggunaannya meliputi : alat-alat rumah…
Standar AISC untuk Konstruksi Baja Standar AISC adalah standar dari American Institute of Steel Construction mengenai konstruksi baja bagi komunitas desain baja struktural dan industri konstruksi di Amerika Serikat. Organisasi AISC AISC adalah lembaga teknis…
Organisasi Standar ASTM ASTM atau American Standard Testing and Material adalah sebuah organisasi dunia yang mengembangkan standardisasi teknik untuk material, produk, sistem dan jasa. Organisasi standardisasi internasional yang bersifat sukarela ini berpusat di…
ISO 13628-4 subsea wellhead ISO 13628-4 adalah Standar Internasional mengenai industri minyak dan gas alam (migas), khususnya tentang subsea wellhead and tree equipment. Versi terbaru yang masih berlaku dari standar ini adalah terbitan tahun…
Daftar Standar IEEE part 12-14 Daftar Standar IEEE part 12-14 adalah kumpulan judul standar IEEE dengan lingkup : Instrumentation and Measurement, Nanotechnology, National Electrical Safety Code (NESC). Standar IEEE merupakan suatu standar yang diterbitkan oleh…
ISO 14644-9 konsentrasi partikel ISO 14644-9 adalah Standar Internasional mengenai ruang bersih dan lingkungan terkontrol, khususnya tentang penilaian kebersihan permukaan untuk konsentrasi partikel. Versi terbaru yang masih berlaku dari standar ini adalah terbitan tahun…
Daftar Standar ASTM G Daftar Standar ASTM G adalah kumpulan judul dokumen standar seri G yang diterbitkan oleh organisasi ASTM (American Standard Testing and Material). ASTM atau American Standard Testing and Material adalah sebuah…
Daftar Standar ASHRAE IBR Daftar Standar ASHRAE IBR adalah kumpulan judul standar gratis dari organisasi pengembangan standar ASHRAE yang bekerja sama dengan ANSI IBR. Definisi ASHRAE IBR ANSI IBR Artikel ini merupakan lanjutan dari…
Standar Organisasi ASME ASME (American Society of Mechanical Engineers) adalah suatu organisasi standar bagi para insinyur mesin di Amerika yang meliputi multidisiplin dengan mencakup secara global. ASME merupakan : masyarakat teknik, organisasi standar,…
Standar CPLSO untuk saluran Listrik pada Crane Standar CPLSO adalah standar referensi dari Crane Power Line Standards Organisation untuk kesehatan dan keselamatan penggunaan Crane di area saluran listrik. Organisasi CPLSO CPLSO memainkan peran aktif dalam mempromosikan kesehatan…
Mengenal Organisasi Standar NIST NIST (National Institute of Standards and Technology) adalah organisasi atau badan non-regulasi dari US Dept of Commerce yang membuat berbagai standar dan teknologi di bidang fisika. Sekilas mengenai Organisasi Standar…
ISO 13628-15 Subsea structures ISO 13628-15 adalah Standar Internasional mengenai industri minyak dan gas alam (migas), khususnya tentang struktur dan manifold bawah laut (Subsea structures and manifolds). Standar versi terbaru yang masih berlaku adalah…
ETSI, organisasi standar informasi dan komunikasi ETSI (European Telecommunications Standards Institute) adalah organisasi standardisasi dunia di bidang informasi dan komunikasi. Organisasi ETSI mendukung pengembangan dan pengujian standar teknis global untuk sistem, aplikasi, dan layanan yang mendukung…
Standar internasional ukuran pakaian Standar internasional ukuran pakaian adalah berbagai standar mengenai ukuran pakaian yang diakui atau digunakan di berbagai wilayah, negara dan benua. Pengertian Pelabelan Ukuran Ukuran pakaian mengacu pada label ukuran yang…

Daftar Standar ASTM C

Format penulisan Standar ASTM Internasional

Kategori Standar ASTM Seri C