Daftar standar ASTM Internasional A

Daftar standar ASTM Internasional adalah kumpulan judul dokumen standar yang diterbitkan oleh organisasi ASTM (American Standard Testing and Material).

ASTM atau American Standard Testing and Material adalah sebuah organisasi dunia yang mengembangkan standardisasi teknik untuk material, produk, sistem dan jasa.

Organisasi standardisasi internasional yang bersifat sukarela ini berpusat di kota Pennsylvania, Amerika Serikat.

Lebih jelas mengenai ASTM Internasional dapat dibaca pada artikel lain dari standarku.com berikut :

Artikel ini merupakan lanjutan dari artikel sebelumnya sebagaimana link diatas, dengan fokus ke pengetahuan mengenai standar apa saja yang sudah dibuatnya.

Daftar standar ASTM Internasional terdiri dari kode A, B, C, … dan seterusnya hingga kode G.

Dikarenakan sangat banyak jumlah standar tersebut maka artikel menjadi terlalu panjang, oleh karena itu standarku.com memecah menjadi beberapa artikel yang dimulai dari artikel ini.

Format penulisan Standar ASTM Internasional

Tata cara penulisan standar ini biasanya diawali dengan huruf dan diikuti dengan nomor, yang ditetapkan secara berurutan.

Ada pilihan (opsional) untuk diikuti oleh tanda hubung dan dua digit terakhir yang berarti tahun di mana standar tersebut diadopsi.

Kode huruf awalan yang ditulis memiliki arti bahwa standar tersebut sesuai dengan subjek sebagaimana berikut :

  • A = Iron and Steel Materials (Bahan baku Besi dan Baja)
  • B = Nonferrous Metal Materials (Bahan baku Logam Nonferrous)
  • C = Ceramic, Concrete, and Masonry Materials (Bahan Keramik, Beton, dan Batu)
  • D = Miscellaneous Materials (Bahan Lain-lain)
  • E = Miscellaneous Subjects (Subyek Lain-Lain)
  • F = Materials for Specific Applications (Bahan baku untuk Aplikasi yang khusus)
  • G = Corrosion, Deterioration, and Degradation of Materials (Korosi, Deteriorasi, dan Degradasi dari bahan baku)

Kategori Standar ASTM Internasional

Berikut ini adalah daftar Standar ASTM Internasional, yang mencakup standar yang masih aktif saat ini atau yang sudah ditarik.

Standar ASTM yang ditarik (withdrawn standard) adalah standar yang telah dihentikan (discontinued) oleh komite sponsornya.

Suatu standar ASTM dapat dilakukan penarikan,dengan atau tanpa adanya penggantian dengan standar atau aturan yang lebih baru.

Untuk memudahkan, terdapat kategori standar berdasarkan urutan kode nya seperti berikut :

A :

  • A1-A999
  • A1000-A1999
  • Withdrawn Standards

B :

  • B1-B999
  • B1000-B1999

C :

  • C1-C999
  • C1000-C1999

D

E

F

G :

  • G1-G999
  • Withdrawn Standard

Daftar standar ASTM Internasional Kode A

Berikut adalah Daftar standar ASTM Internasional selengkapnya untuk kode A, untuk kategori B hingga G kami pecah ke artikel lain standarku.com karena terlalu panjang.

Standar ASTM A

  • AIIMASTM – BP-01-08 Portable Document Format-Healthcare (PDF) A Best Practices Guide

Standar ASTM A1-A999

  • A1 – 00(2018) Specification for Carbon Steel Tee Rails
  • A2 – 02(2020) Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
  • A3 – 01(2019) Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
  • A6/A6M – 19 Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
  • A6/A6M-RU-RU – 19 Стандартные технические условия на прутки, плиты, профили и шпунтовые сваи из катаной конструкционной стали, общие требования
  • A20/A20M – 20 Specification for General Requirements for Steel Plates for Pressure Vessels
  • A27/A27M – 20 Specification for Steel Castings, Carbon, for General Application
  • A29/A29M – 20 Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought
  • A31 – 14(2020) Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
  • A34/A34M – 06(2018) Practice for Sampling and Procurement Testing of Magnetic Materials
  • A36/A36M – 19 Specification for Carbon Structural Steel
  • A36/A36M-SP – 19 Especificación de estándar para acero estructural al carbono
  • A36/A36M-RU-RU – 19 Стандартные технические условия на углеродистую конструкционную сталь
  • A36/A36M-POR – 19 Especificação padrão para Aço carbono estrutural
  • A47/A47M – 99(2018)e1 Specification for Ferritic Malleable Iron Castings
  • A48/A48M – 03(2016) Specification for Gray Iron Castings
  • A49 – 12(2019) Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
  • A53/A53M – 20 Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
  • A53/A53M-SP – 20 Especificación de estándar para tubo de acero, negro e inmerso en caliente, zincado, soldado y sin costuras
  • A53/A53M-POR – 20 Especificação padrão para Tubo de aço, preto e imersão a quente, revestido de zinco, soldado e sem emenda
  • A65 – 07(2013) Specification for Steel Track Spikes
  • A66 – 07(2013) Specification for Steel Screw Spikes
  • A67 – 00(2016) Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked
  • A74 – 20 Specification for Cast Iron Soil Pipe and Fittings
  • A90/A90M – 13(2018) Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
  • A90/A90M-RUS – 13(2018) Стандартный метод определения веса [массы] покрытия на железных и стальных изделиях, покрытых цинком или цинковым сплавом1
  • A99 – 03(2019) Specification for Ferromanganese
  • A100 – 07(2018) Specification for Ferrosilicon
  • A101 – 04(2019) Specification for Ferrochromium
  • A102 – 04(2019) Specification for Ferrovanadium
  • A105/A105M – 21 Specification for Carbon Steel Forgings for Piping Applications
  • A106/A106M – 19a Specification for Seamless Carbon Steel Pipe for High-Temperature Service
  • A108 – 18 Specification for Steel Bar, Carbon and Alloy, Cold-Finished
  • A109/A109M – 16(2018) Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
  • A111 – 99a(2020) Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire
  • A116 – 11(2016) Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric
  • A121 – 19 Specification for Metallic-Coated Carbon Steel Barbed Wire
  • A123/A123M – 17 Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
  • A125 – 96(2018) Specification for Steel Springs, Helical, Heat-Treated
  • A126 – 04(2019) Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
  • A128/A128M – 19 Specification for Steel Castings, Austenitic Manganese
  • A131/A131M – 19 Specification for Structural Steel for Ships
  • A131/A131M-RU-RU – 19 Технические условия на конструкционную сталь для судов
  • A132 – 04(2019) Specification for Ferromolybdenum
  • A134/A134M – 19 Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
  • A135/A135M – 20 Specification for Electric-Resistance-Welded Steel Pipe
  • A139/A139M – 16 Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
  • A143/A143M – 07(2020) Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
  • A144 – 04(2019) Specification for Ferrotungsten
  • A146 – 04(2019) Specification for Molybdenum Oxide Products
  • A148/A148M – 20e1 Specification for Steel Castings, High Strength, for Structural Purposes
  • A153/A153M – 16a Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
  • A159 – 83(2020) Specification for Automotive Gray Iron Castings
  • A178/A178M – 19 Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
  • A179/A179M – 19 Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
  • A179/A179M-RUS – 19 Стандартная спецификация на бесшовные трубы из холоднотянутой низкоуглеродистой стали, предназначенных для трубчатых теплообменников и конденсаторов
  • A181/A181M – 14(2020) Specification for Carbon Steel Forgings, for General-Purpose Piping
  • A182/A182M – 20 Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
  • A183 – 14(2020) Specification for Carbon Steel Track Bolts and Nuts
  • A184/A184M – 19 Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
  • A184/A184M-SP – 19 Especificación de estándar para mallas de barras de acero corrugadas soldadas para refuerzo del hormigón
  • A184/A184M-POR – 19 Especificação padrão para Malhas de aço soldadas para reforço de concreto
  • A192/A192M – 17 Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
  • A193/A193M – 20 Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
  • A194/A194M – 20a Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
  • A197/A197M – 00(2019) Specification for Cupola Malleable Iron
  • A203/A203M – 17 Specification for Pressure Vessel Plates, Alloy Steel, Nickel
  • A204/A204M – 17 Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
  • A209/A209M – 03(2017) Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
  • A210/A210M – 19 Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
  • A210/A210M-RU-RU – 19 Стандартные технические условия на бесшовные трубы из среднеуглеродистой стали для котлов и пароперегревателей
  • A213/A213M – 19a Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
  • A213/A213M-RU-RU – 19a Стандартные технические условия на бесшовные трубы из ферритной и аустенитной легированной стали для котлов, пароперегревателей и теплообменников
  • A214/A214M – 19 Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
  • A216/A216M – 18 Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
  • A216/A216M-RU-RU – 18 Стандартные технические условия на отливки из углеродистой стали, подходящие для сварки плавлением, для эксплуатации в условиях высоких температур
  • A217/A217M – 20 Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
  • A220/A220M – 99(2018)e1 Specification for Pearlitic Malleable Iron
  • A225/A225M – 17 Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
  • A227/A227M – 17 Specification for Steel Wire, Cold-Drawn for Mechanical Springs
  • A228/A228M – 18 Specification for Steel Wire, Music Spring Quality
  • A229/A229M – 18 Specification for Steel Wire, Quenched and Tempered for Mechanical Springs
  • A230/A230M – 19 Specification for Steel Wire, Carbon Valve Spring Quality
  • A231/A231M – 18 Specification for Chromium-Vanadium Alloy Steel Spring Wire
  • A232/A232M – 18 Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
  • A234/A234M – 19 Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
  • A239 – 14(2019) Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
  • A240/A240M – 20a Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
  • A242/A242M – 13(2018) Specification for High-Strength Low-Alloy Structural Steel
  • A242/A242M-SP – 13(2018) Especificación estándar para acero estructural de baja aleación de alta resistencia
  • A242/A242M-POR – 13(2018) Especificação padrão para Aço estrutural de alta resistência e baixa liga
  • A242/A242M-RU-RU – 13(2018) Стандартные технические условия на высокопрочную низколегированную конструкционную сталь
  • A247 – 19 Test Method for Evaluating the Microstructure of Graphite in Iron Castings
  • A249/A249M – 18a Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
  • A252/A252M – 19 Specification for Welded and Seamless Steel Pipe Piles
  • A252/A252M-RU-RU – 19 Стандартные технические условия на сварные и бесшовные трубчатые сваи из нержавеющей стали
  • A254/A254M – 12(2019) Specification for Copper-Brazed Steel Tubing
  • A255 – 20a Test Methods for Determining Hardenability of Steel
  • (Includes the Jominy test and a method based on work by M. A. Grossman (the Grossman method).[1])
  • A262 – 15 Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
  • A262-RUS – 15 Стандартные методики выявления склонности к межкристаллитной коррозии аустенитных нержавеющих сталей
  • A263 – 12(2019) Specification for Stainless Chromium Steel-Clad Plate
  • A264 – 12(2019) Specification for Stainless Chromium-Nickel Steel-Clad Plate
  • A264-RU-RU – 12(2019) Стандартные технические условия на плиты, плакированные нержавеющей хромоникелевой сталью
  • A265 – 12(2019) Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
  • A265-RU-RU – 12(2019) Стандартные технические условия на стальные плиты, плакированные никелем и сплавом на основе никеля
  • A266/A266M – 20 Specification for Carbon Steel Forgings for Pressure Vessel Components
  • A268/A268M – 20 Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
  • A269/A269M – 15a(2019) Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
  • A270/A270M – 15(2019) Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
  • A275/A275M – 18 Practice for Magnetic Particle Examination of Steel Forgings
  • A276/A276M – 17 Specification for Stainless Steel Bars and Shapes
  • A276/A276M-RUS – 17 СТАНДАРТНАЯ СПЕЦИФИКАЦИЯ НЕРЖАВЕЮЩИХ СОРТОВЫХ И ПРОФИЛЬНЫХ СТАЛЕЙ
  • A278/A278M – 01(2020) Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650 °F (350 °C)
  • A283/A283M – 18 Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
  • A283/A283M-RU-RU – 18 Стандартные технические условия на плиты из углеродистой стали с низким и средним пределом прочности при растяжении
  • A285/A285M – 17 Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
  • A285/A285M-RU-RU – 17 Стандартные технические условия на пластины для сосудов под давлением из углеродистой стали с низким и средним пределом прочности на растяжение
  • A288 – 18 Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
  • A289/A289M – 97(2018) Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
  • A290/A290M – 16 Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
  • A291/A291M – 19 Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
  • A295/A295M – 14(2020) Specification for High-Carbon Anti-Friction Bearing Steel
  • A297/A297M – 20 Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
  • A299/A299M – 17 Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
  • A302/A302M – 17 Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
  • A304 – 20 Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
  • A307 – 14e1 Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
  • A307-SP – 14e1 Especificación estándar para pernos, espárragos y varilla roscada de acero al carbono de 60 000 PSI de resistencia a la tracción
  • A311/A311M – 04(2020) Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
  • A312/A312M – 19 Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
  • A312/A312M-RU-RU – 19 Стандартные технические условия на бесшовные, сварные и подвергнутые интенсивной холодной деформации трубы из аустенитной нержавеющей стали
  • A313/A313M – 18 Specification for Stainless Steel Spring Wire
  • A314 – 19 Specification for Stainless Steel Billets and Bars for Forging
  • A319 – 71(2020) Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure-Containing Parts
  • A320/A320M – 18 Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
  • A320/A320M-RU-RU – 18 Стандартные технические условия на крепежные изделия из легированной и нержавеющей стали для эксплуатации при низких температурах
  • A322 – 13(2018)e1 Specification for Steel Bars, Alloy, Standard Grades
  • A323 – 05(2020) Specification for Ferroboron
  • A324 – 08(2019) Specification for Ferrotitanium
  • A327/A327M – 11(2017) Test Methods for Impact Testing of Cast Irons
  • A328/A328M – 13a(2018) Specification for Steel Sheet Piling
  • A333/A333M – 18 Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
  • A333/A333M-RU-RU – 18 Стандартные технические условия на бесшовные и сварные стальные трубы, используемые в условиях низких температур и для других видов применения с требуемой ударной вязкостью
  • A334/A334M – 04a(2016) Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
  • A334/A334M-RU-RU – 04a(2016) Стандартные технические условия на бесшовные и сварные трубы из углеродистой и легированной стали для эксплуатации при низких температурах
  • A335/A335M – 19a Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
  • A335/A335M-RU-RU – 19a Стандартные технические условия на бесшовные трубы из ферритной легированной стали для эксплуатации в условиях высоких температур
  • A336/A336M – 19 Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
  • A338 – 84(2018) Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy-Duty Service at Temperatures Up to 650 °F (345 °C)
  • A340 – 20 Terminology of Symbols and Definitions Relating to Magnetic Testing
  • A341/A341M – 16 Test Method for Direct Current Magnetic Properties of Soft Magnetic Materials Using D-C Permeameters and the Point by Point (Ballistic) Test Methods
  • A342/A342M – 14 Test Methods for Permeability of Weakly Magnetic Materials
  • A343/A343M – 14(2019) Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
  • A345 – 19 Specification for Flat-Rolled Electrical Steels for Magnetic Applications
  • A348/A348M – 05(2015) Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame
  • A350/A350M – 18 Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
  • A350/A350M-RU-RU – 18 Стандартные технические условия на поковки из углеродистой и низколегированной стали, требующие проведения испытания на ударную вязкость образца с надрезом для компонентов трубопроводов
  • A351/A351M – 18e1 Specification for Castings, Austenitic, for Pressure-Containing Parts
  • A352/A352M – 18a Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
  • A352/A352M-RU-RU – 18a Стандартные технические условия на стальные отливки, ферритные и мартенситные, для находящихся под давлением деталей, подходящих для эксплуатации в условиях пониженных температур
  • A353/A353M – 17 Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 % Nickel
  • A354 – 17e2 Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
  • A355 – 89(2017) Specification for Steel Bars, Alloys, for Nitriding
  • A356/A356M – 16 Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
  • A358/A358M – 19 Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
  • A363 – 03(2020)e1 Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
  • A367 – 11(2017) Test Methods of Chill Testing of Cast Iron
  • A368 – 95a(2019) Specification for Stainless Steel Wire Strand
  • A369/A369M – 18a Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
  • A370 – 20 Test Methods and Definitions for Mechanical Testing of Steel Products
  • A370-SP – 20 Métodos de prueba estándar y definiciones para pruebas mecánicas de productos de acero
  • A372/A372M – 20e1 Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
  • A376/A376M – 19 Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
  • A377 – 18 Index of Specifications for Ductile Iron Pressure Pipe
  • A380/A380M – 17 Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
  • A380/A380M-RU-RU – 17 Стандартное практическое руководство по очистке, удалению окалины и пассивированию деталей, оборудования и систем из нержавеющей стали
  • A381/A381M – 18 Specification for Metal-Arc-Welded Carbon or High-Strength Low-Alloy Steel Pipe for Use With High-Pressure Transmission Systems
  • A384/A384M – 07(2019) Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
  • A385/A385M – 20 Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
  • A387/A387M – 17a Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
  • A388/A388M – 19 Practice for Ultrasonic Examination of Steel Forgings
  • A388/A388M-RU-RU – 19 Стандартное практическое руководство по ультразвуковой дефектоскопии стальных поковок
  • A389/A389M – 13(2018) Specification for Steel Castings, Alloy, Specially Heat Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
  • A390 – 06(2016) Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
  • A391/A391M – 07(2012) Specification for Grade 80 Alloy Steel Chain
  • A392 – 11a(2017) Specification for Zinc-Coated Steel Chain-Link Fence Fabric
  • A394 – 08(2015) Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
  • A395/A395M – 99(2018) Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
  • A400 – 17 Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
  • A401/A401M – 18 Specification for Steel Wire, Chromium-Silicon Alloy
  • A403/A403M – 20 Specification for Wrought Austenitic Stainless Steel Piping Fittings
  • A407 – 18 Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
  • A409/A409M – 19 Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
  • A411 – 08(2017) Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
  • A413/A413M – 07(2012) Specification for Carbon Steel Chain
  • A414/A414M – 14(2019) Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
  • A416/A416M – 18 Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete
  • A416/A416M-SP – 18 Especificación de estándar para torón de acero de siete alambres, de baja relajación, para hormigón pretensado
  • A416/A416M-POR – 18 Especificação padrão para Cordoalha de aço de sete fios de baixa relaxação para concreto protendido
  • A418/A418M – 15(2020) Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
  • A420/A420M – 20 Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
  • A421/A421M – 15 Specification for Stress-Relieved Steel Wire for Prestressed Concrete
  • A421/A421M-SP – 15 Especificación Normalizada para Alambre de Acero Aliviado Esfuerzos sin Recubrimiento para Concreto Preesforzado
  • A421/A421M-POR – 15 Especificação padrão para Fio de aço com alívio de tensão para concreto protendido
  • A423/A423M – 19 Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
  • A424/A424M – 18 Specification for Steel, Sheet, for Porcelain Enameling
  • A426/A426M – 18 Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
  • A428/A428M – 10(2019) Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
  • A434/A434M – 18 Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
  • A435/A435M – 17 Specification for Straight-Beam Ultrasonic Examination of Steel Plates
  • A435/A435M-RU-RU – 17 Стандартные технические условия на ультразвуковое испытание стальных плит методом прямого преобразователя
  • A436 – 84(2020) Specification for Austenitic Gray Iron Castings
  • A437/A437M – 15 Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service
  • A439/A439M – 18 Specification for Austenitic Ductile Iron Castings
  • A447/A447M – 11(2016) Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
  • A449 – 14(2020) Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
  • A450/A450M – 18a Specification for General Requirements for Carbon and Low Alloy Steel Tubes
  • A451/A451M – 20 Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
  • A453/A453M – 17 Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
  • A453/A453M-RU-RU – 17 Стандартные технические условия на болтовое соединение для условий эксплуатации при высоких температурах из материалов с коэффициентами расширения, подобным коэффициенту расширения аустенитной нержавеющей стали
  • A455/A455M – 12a(2017) Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
  • A456/A456M – 08(2018) Specification for Magnetic Particle Examination of Large Crankshaft Forgings
  • A459 – 08(2020) Specification for Zinc-Coated Flat Steel Armoring Tape
  • A460 – 11(2016) Specification for Copper-Clad Steel Wire Strand
  • A463/A463M – 15(2020)e1 Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
  • A466/A466M – 07(2020) Specification for Weldless Chain
  • A467/A467M – 20 Specification for Machine and Coil Chain
  • A469/A469M – 07(2017) Specification for Vacuum-Treated Steel Forgings for Generator Rotors
  • A470/A470M – 05(2020) Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
  • A471/A471M – 19 Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
  • A472/A472M – 07(2017) Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings
  • A473 – 19 Specification for Stainless Steel Forgings
  • A474 – 03(2017) Specification for Aluminum-Coated Steel Wire Strand
  • A475 – 03(2020) Specification for Zinc-Coated Steel Wire Strand
  • A476/A476M – 00(2018) Specification for Ductile Iron Castings for Paper Mill Dryer Rolls
  • A478 – 97(2019) Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
  • A479/A479M – 20 Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
  • A480/A480M – 20a Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
  • A481 – 05(2020) Specification for Chromium Metal
  • A482/A482M – 11(2016) Specification for Ferrochrome-Silicon
  • A483/A483M – 10(2020) Specification for Silicomanganese
  • A484/A484M – 20b Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
  • A485 – 17 Specification for High Hardenability Antifriction Bearing Steel
  • A487/A487M – 20 Specification for Steel Castings Suitable for Pressure Service
  • A488/A488M – 18e2 Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
  • A489 – 18e1 Specification for Carbon Steel Eyebolts
  • A491 – 11(2017) Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
  • A492 – 95(2019) Specification for Stainless Steel Rope Wire
  • A493 – 16 Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
  • A494/A494M – 18a Specification for Castings, Nickel and Nickel Alloy
  • A495 – 06(2020) Specification for Calcium-Silicon Alloys
  • A498/A498M – 17 Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
  • A499 – 15(2020) Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails
  • A500/A500M – 21 Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
  • A501/A501M – 14 Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
  • A501/A501M-SP – 14 Especificación de estándar para tubos estructurales de acero al carbono sin costura y soldados conformados en caliente
  • A501/A501M-POR – 14 Especificação padrão para Tubos estruturais de aço carbono soldados e sem emendas, moldados a quente
  • A502 – 03(2015) Specification for Rivets, Steel, Structural
  • A503/A503M – 15(2020) Specification for Ultrasonic Examination of Forged Crankshafts
  • A504/A504M – 18 Specification for Wrought Carbon Steel Wheels
  • A505 – 16 Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
  • A506 – 16 Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
  • A507 – 16 Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
  • A508/A508M – 18 Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
  • A510/A510M – 20 Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel
  • A511/A511M – 20 Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar
  • A512 – 18 Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
  • A513/A513M – 20a Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
  • A514/A514M – 18e1 Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
  • A515/A515M – 17 Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
  • A516/A516M – 17 Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
  • A516/A516M-RU-RU – 17 Стандартные технические условия на пластины для сосудов под давлением из углеродистой стали для умеренных и низких рабочих температур
  • A517/A517M – 17 Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
  • A517/A517M-RU-RU – 17 Стандартные технические условия на плиты для сосудов под давлением из высокопрочной закаленной и отпущенной легированной стали
  • A518/A518M – 99(2018) Specification for Corrosion-Resistant High-Silicon Iron Castings
  • A519/A519M – 17 Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
  • A522/A522M – 14(2019) Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
  • A523/A523M – 20 Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
  • A524 – 17 Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
  • A529/A529M – 19 Specification for High-Strength Carbon-Manganese Steel of Structural Quality
  • A529/A529M-RU-RU – 19 Стандартные технические условия на высокопрочную марганцевоуглеродистую сталь конструкционного качества
  • A530/A530M – 18 Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
  • A530/A530M-RU-RU – 18 Стандартные технические условия на общие требования к специализированным трубам из углеродистой и легированной стали
  • A531/A531M – 18 Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
  • A532/A532M – 10(2019) Specification for Abrasion-Resistant Cast Irons
  • A533/A533M – 16 Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
  • A534 – 17 Specification for Carburizing Steels for Anti-Friction Bearings
  • A536 – 84(2019)e1 Specification for Ductile Iron Castings
  • A537/A537M – 20 Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
  • A540/A540M – 15 Specification for Alloy-Steel Bolting for Special Applications
  • A541/A541M – 05(2020) Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
  • A542/A542M – 19 Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
  • A543/A543M – 09(2014) Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
  • A550 – 16 Specification for Ferrocolumbium (Ferroniobium)
  • A551/A551M – 08(2018) Specification for Carbon Steel Tires for Railway and Rapid Transit Applications
  • A553/A553M – 17e1 Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7, 8, and 9 % Nickel
  • A554 – 16 Specification for Welded Stainless Steel Mechanical Tubing
  • A555/A555M – 20 Specification for General Requirements for Stainless Steel Wire and Wire Rods
  • A556/A556M – 18 Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
  • A560/A560M – 12(2018) Specification for Castings, Chromium-Nickel Alloy
  • A561 – 08(2020) Practice for Macroetch Testing of Tool Steel Bars
  • A562/A562M – 10(2015) Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
  • A563M – 07(2013) Specification for Carbon and Alloy Steel Nuts (Metric)
  • A563 – 15 Specification for Carbon and Alloy Steel Nuts
  • A563-RU-RU – 15 Стандартные технические условия на гайки из углеродистой и легированной стали
  • A564/A564M – 19a Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
  • A564/A564M-RU-RU – 19a Стандартные технические условия на горячекатаные и упрочненные старением с холодной отделкой прутки и профили из нержавеющей стали
  • A565/A565M – 10(2017)e1 Specification for Martensitic Stainless Steel Bars for High-Temperature Service
  • A568/A568M – 19a Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
  • A571/A571M – 01(2019) Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
  • A572/A572M – 18 Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
  • A572/A572M-SP – 18
  • A572/A572M-POR – 18 Especificação padrão para Aço estrutural de colúmbio-vanádio de alta resistência e baixa liga
  • A572/A572M-RU-RU – 18 Стандартные технические условия на высокопрочную низколегированную ниобий-ванадиевую конструкционную сталь
  • A573/A573M – 20 Specification for Structural Carbon Steel Plates
  • A574 – 17 Specification for Alloy Steel Socket-Head Cap Screws
  • A575 – 20 Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
  • A576 – 17 Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
  • A577/A577M – 17 Specification for Ultrasonic Angle-Beam Examination of Steel Plates
  • A577/A577M-RU-RU – 17 Стандартные технические условия на ультразвуковой контроль толстолистовой стали посредством наклонного пучка
  • A578/A578M – 17 Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
  • A578/A578M-RUS – 17 Стандартная спецификация на ультразвуковое исследование узконаправленным пучком толстолистового стального проката специального назначения
  • A579/A579M – 20 Specification for Superstrength Alloy Steel Forgings
  • A580/A580M – 18 Specification for Stainless Steel Wire
  • A581/A581M – 95b(2014) Specification for Free-Machining Stainless Steel Wire and Wire Rods
  • A582/A582M – 12(2017) Specification for Free-Machining Stainless Steel Bars
  • A586 – 18 Specification for Metallic-Coated Parallel and Helical Steel Wire Structural Strand
  • A587 – 96(2019) Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
  • A588/A588M – 19 Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
  • A588/A588M-SP – 19 Especificación de estándar para acero estructural de baja aleación y alta resistencia, de límite de elasticidad mínimo de hasta 50 ksi [345 MPa], con resistencia a la corrosión atmosférica
  • A588/A588M-POR – 19 Especificação padrão para Aço estrutural de baixa resistência e alta resistência, até 50 ksi [345 MPa] de limite de escoamento mínimo, com resistência à corrosão atmosférica
  • A589/A589M – 06(2018) Specification for Seamless and Welded Carbon Steel Water-Well Pipe
  • A592/A592M – 10(2020) Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels
  • A595/A595M – 18 Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
  • A596/A596M – 14 Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
  • A597/A597M – 14(2020) Specification for Cast Tool Steel
  • A598/A598M – 02(2015) Test Method for Magnetic Properties of Magnetic Amplifier Cores
  • A599/A599M – 07(2017) Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
  • A600 – 92a(2016) Specification for Tool Steel High Speed
  • A601/A601M – 10(2020) Specification for Electrolytic Manganese Metal
  • A602 – 94(2018) Specification for Automotive Malleable Iron Castings
  • A603 – 19 Specification for Metallic-Coated Steel Structural Wire Rope
  • A604/A604M – 07(2017) Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
  • A604/A604M-RU-RU – 07(2017) Стандартное практическое руководство по испытаниям макроструктуры травлением стальных прутков и заготовок, полученных переплавом с расходуемым электродом
  • A606/A606M – 18 Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
  • A608/A608M – 20 Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
  • A609/A609M – 12(2018) Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
  • A609/A609M-RU-RU – 12(2018) Стандартное практическое руководство по ультразвуковому исследованию отливок, углеродистой, низколегированной и мартенситной нержавеющей стали
  • A610 – 79(2019) Test Methods for Sampling and Testing Ferroalloys for Determination of Size
  • A612/A612M – 20 Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
  • A615/A615M – 20 Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
  • A615/A615M-SP – 20 Especificación de estándar para barras de acero al carbono lisas y corrugadas para refuerzo del hormigón
  • A615/A615M-POR – 20 Especificação padrão para Barras de aço carbono deformadas e lisas para reforço de concreto
  • A618/A618M – 04(2015) Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
  • A623M – 16 Specification for Tin Mill Products, General Requirements [Metric]
  • A623 – 16 Specification for Tin Mill Products, General Requirements
  • A624/A624M – 13(2018) Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
  • A625/A625M – 13(2018) Specification for Tin Mill Products, Black Plate, Single-Reduced
  • A626/A626M – 16 Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
  • A627 – 03(2019) Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
  • A630 – 16ae1 Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
  • A632 – 19 Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
  • A633/A633M – 18 Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
  • A635/A635M – 15 Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
  • A635/A635M-RU-RU – 15 Стандартные технические условия на сталь, тонколистовую и полосовую, в рулонах большой толщины, горячекатаную, легированную, углеродистую, конструкционную, высокопрочную низколегированную и высокопрочнуюнизколегированную с улучшенной формуемостью, общие требования
  • A636 – 08(2018) Specification for Nickel Oxide Sinter
  • A638/A638M – 20 Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
  • A640 – 97(2019) Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
  • A641/A641M – 19 Specification for Zinc–Coated (Galvanized) Carbon Steel Wire
  • A641/A641M-RU-RU – 19 Стандартные технические условия на оцинкованную (гальванизированную) проволоку из углеродистой стали
  • A644 – 17 Terminology Relating to Iron Castings
  • A645/A645M – 10(2016) Specification for Pressure Vessel Plates, 5 % and 51 2 % Nickel Alloy Steels, Specially Heat Treated
  • A646/A646M – 17 Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
  • A648 – 18 Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe
  • A649/A649M – 10(2020) Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
  • A650/A650M – 18 Specification for Tin Mill Products, Black Plate, Double Reduced
  • A653/A653M – 20 Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
  • A656/A656M – 18 Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
  • A656/A656M-RU-RU – 18 Стандартные технические условия на плиты из горячекатаной высокопрочной низколегированной конструкционной стали с улучшенной формуемостью
  • A657/A657M – 18 Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
  • A659/A659M – 18 Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
  • A660/A660M – 11(2016) Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
  • A662/A662M – 17 Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
  • A663/A663M – 17 Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
  • A664 – 15 Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
  • A666 – 15 Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
  • A667/A667M – 87(2018) Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
  • A668/A668M – 20a Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
  • A671/A671M – 20 Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
  • A672/A672M – 19 Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
  • A673/A673M – 17 Specification for Sampling Procedure for Impact Testing of Structural Steel
  • A673/A673M-RUS – 17 Стандартная спецификация на процедуру отбора образцов конструкционной стали для испытаний на ударную вязкость
  • A674 – 18 Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
  • A675/A675M – 14(2019) Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
  • A677 – 16 Specification for Nonoriented Electrical Steel Fully Processed Types
  • A679/A679M – 17 Specification for Steel Wire, High Tensile Strength, Cold Drawn
  • A681 – 08(2015) Specification for Tool Steels Alloy
  • A683 – 16 Specification for Nonoriented Electrical Steel, Semiprocessed Types
  • A684/A684M – 17 Specification for Steel, Strip, High-Carbon, Cold-Rolled
  • A686 – 92(2016) Specification for Tool Steel, Carbon
  • A688/A688M – 18 Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
  • A689 – 97(2018) Specification for Carbon and Alloy Steel Bars for Springs
  • A690/A690M – 13a(2018) Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
  • A691/A691M – 19 Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
  • A693 – 16 Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
  • A694/A694M – 16 Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
  • A694/A694M-RUS – 16 Стандартная спецификация на поковки из углеродистой и легированной стали для трубных фитингов, фланцев, клапанов и деталей трубопроводов при обслуживании под высоким давлением
  • A696 – 17 Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
  • A696-RUS – 17 Стандартная спецификация на горячекатаные или обработанные в холодном состоянии прутки специального назначения из углеродистой стали для компонентов напорных трубопроводов
  • A697/A697M – 13(2018) Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
  • A698/A698M – 20 Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
  • A700 – 14(2019) Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment
  • A701/A701M – 10(2020) Specification for Ferromanganese-Silicon
  • A702 – 13(2018) Specification for Steel Fence Posts, Hot Wrought
  • A703/A703M – 20a Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
  • A704/A704M – 19e1 Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
  • A705/A705M – 20 Specification for Age-Hardening Stainless Steel Forgings
  • A706/A706M – 16 Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
  • A706/A706M-SP – 16 Especificación Normalizada para Barras de Acero de Baja Aleación Lisas y Corrugadas para Refuerzo de Concreto
  • A706/A706M-RUS – 16 СТАНДАРТНАЯ СПЕЦИФИКАЦИЯ НА ФАСОННЫЕ И ГЛАДКИЕ АРМАТУРНЫЕ СТЕРЖНИ ИЗ НИЗКОЛЕГИРОВАННОЙ СТАЛИ ДЛЯ ЖЕЛЕЗОБЕТОНА
  • A706/A706M-POR – 16 Especificação padrão para Barras de aço de baixa liga deformadas e lisas para reforço de concreto
  • A707/A707M – 19 Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
  • A709/A709M – 18 Specification for Structural Steel for Bridges
  • A710/A710M – 19 Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy Structural Steel Plates
  • A711/A711M – 17 Specification for Steel Forging Stock
  • A712 – 14 Test Method for Electrical Resistivity of Soft Magnetic Alloys
  • A713 – 04(2017) Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
  • A716 – 18 Specification for Ductile Iron Culvert Pipe
  • A717/A717M – 12(2018) Test Method for Surface Insulation Resistivity of Single-Strip Specimens
  • A719/A719M – 14(2019) Test Method for Lamination Factor of Magnetic Materials
  • A720/A720M – 02(2016)e1 Test Method for Ductility of Nonoriented Electrical Steel
  • A721/A721M – 02(2016) Test Method for Ductility of Oriented Electrical Steel
  • A722/A722M – 18 Specification for High-Strength Steel Bars for Prestressed Concrete
  • A722/A722M-SP – 18
  • A722/A722M-POR – 18 Especificação padrão para Barras de aço de alta resistência para concreto protendido
  • A723/A723M – 18a Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
  • A724/A724M – 09(2018) Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels
  • A726 – 18 Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types
  • A727/A727M – 14(2019) Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
  • A729/A729M – 17 Specification for Carbon and Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
  • A732/A732M – 20 Specification for Castings, Investment, Carbon and Low-Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
  • A733 – 16 Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
  • A736/A736M – 17 Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy Steel
  • A737/A737M – 17 Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
  • A738/A738M – 19 Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
  • A739 – 90a(2016) Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
  • A740 – 98(2014) Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
  • A741 – 11(2016) Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail
  • A742/A742M – 20 Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
  • A743/A743M – 19 Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
  • A744/A744M – 20a Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
  • A745/A745M – 20 Practice for Ultrasonic Examination of Austenitic Steel Forgings
  • A746 – 18 Specification for Ductile Iron Gravity Sewer Pipe
  • A747/A747M – 18 Specification for Steel Castings, Stainless, Precipitation Hardening
  • A748/A748M – 87(2018) Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use
  • A749/A749M – 14 Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
  • A751 – 20 Test Methods and Practices for Chemical Analysis of Steel Products
  • A753 – 08(2013) Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
  • A754/A754M – 18 Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
  • A755/A755M – 18 Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
  • A756 – 17 Specification for Stainless Anti-Friction Bearing Steel
  • A757/A757M – 15 Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
  • A758/A758M – 14(2019) Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
  • A759 – 10(2016) Specification for Carbon Steel Crane Rails
  • A760/A760M – 15(2020) Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
  • A761/A761M – 18 Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
  • A762/A762M – 19 Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
  • A763 – 15 Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
  • A764 – 07(2017) Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
  • A765/A765M – 07(2017) Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
  • A767/A767M – 19 Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
  • A767/A767M-SP – 19 Especificación de estándar para barras de acero zincadas (galvanizadas) para refuerzo del hormigón
  • A767/A767M-POR – 19 Especificação padrão para Barras de aço (galvanizado) revestido de zinco para reforço de concreto
  • A769/A769M – 17 Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes
  • A770/A770M – 03(2018) Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
  • A770/A770M-RU-RU – 03(2018) Стандартные технические условия на испытания стальных плит специального назначения на растяжение в направлении толщины
  • A772/A772M – 00(2016) Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current
  • A773/A773M – 14 Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
  • A774/A774M – 14(2019) Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
  • A775/A775M – 19 Specification for Epoxy-Coated Steel Reinforcing Bars
  • A775/A775M-SP – 19 Especificación de estándar para barras de acero de refuerzo con recubrimiento de epoxi
  • A775/A775M-POR – 19 Especificação padrão para Vergalhões de aço revestidos com epóxi
  • A778/A778M – 16 Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
  • A778/A778M-RU-RU – 16 Стандартные технические условия на сварные неотожженые трубные изделия из аустенитной нержавеющей стали
  • A779/A779M – 16 Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete
  • A780/A780M – 20 Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
  • A781/A781M – 20a Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
  • A786/A786M – 15 Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
  • A787/A787M – 20a Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
  • A788/A788M – 19a Specification for Steel Forgings, General Requirements
  • A789/A789M – 20 Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
  • A790/A790M – 20 Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
  • A792/A792M – 10(2015) Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
  • A793 – 96(2014) Specification for Rolled Floor Plate, Stainless Steel
  • A794/A794M – 18 Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled
  • A795/A795M – 13(2020) Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
  • A796/A796M – 17a Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
  • A798/A798M – 17 Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
  • A799/A799M – 10(2020) Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
  • A800/A800M – 20 Practice for Estimating Ferrite Content of Stainless Steel Castings Containing Both Ferrite and Austenite
  • A801 – 14 Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)
  • A802 – 19 Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
  • A802-RUS – 19 Методика для стальных отливок, стандарты приемки поверхности, визуальный осмотр
  • A803/A803M – 16 Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes
  • A804/A804M – 04(2015) Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens
  • A805/A805M – 09(2016) Specification for Steel, Flat Wire, Carbon, Cold-Rolled
  • A807/A807M – 19 Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
  • A809 – 08(2017) Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
  • A810 – 01(2019) Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
  • A811 – 15 Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy Techniques
  • A813/A813M – 14(2019) Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
  • A814/A814M – 15(2019) Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
  • A815/A815M – 20 Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
  • A817 – 12(2017) Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
  • A818 – 06(2016) Specification for Coppered Carbon Steel Wire
  • A820/A820M – 16 Specification for Steel Fibers for Fiber-Reinforced Concrete
  • A820/A820M-SP – 16 Especificación estándar para fibras de acero para hormigón reforzado con fibra
  • A820/A820M-POR – 16 Especificação padrão para Fibras de aço para concreto reforçado com fibra
  • A821/A821M – 15 Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks
  • A822/A822M – 20 Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
  • A823 – 99(2019) Specification for Statically Cast Permanent Mold Gray Iron Castings
  • A824 – 01(2017) Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
  • A827/A827M – 14(2018) Specification for Plates, Carbon Steel, for Forging and Similar Applications
  • A829/A829M – 17 Specification for Alloy Structural Steel Plates
  • A830/A830M – 18 Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
  • A832/A832M – 17 Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
  • A833 – 19 Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
  • A834 – 95(2020) Specification for Common Requirements for Iron Castings for General Industrial Use
  • A835/A835M – 10(2020) Specification for Sizes of Ferroalloys and Alloy Additives
  • A836/A836M – 14(2020) Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
  • A837/A837M – 17 Specification for Steel Forgings, Alloy, for Carburizing Applications
  • A838 – 18 Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications
  • A839 – 15 Specification for Iron-Phosphorus Powder Metallurgy Parts for Soft Magnetic Applications
  • A841/A841M – 17 Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
  • A842 – 11A(2018)e1 Specification for Compacted Graphite Iron Castings
  • A844/A844M – 09(2015) Specification for Steel Plates, 9 %  Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
  • A847/A847M – 20 Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
  • A848 – 17 Specification for Low-Carbon Magnetic Iron
  • A849 – 15 Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
  • A853 – 19 Specification for Steel Wire, Carbon, for General Use
  • A854/A854M – 08(2017) Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
  • A855/A855M – 03(2020) Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
  • A856/A856M – 03(2020) Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
  • A857/A857M – 19 Specification for Steel Sheet Piling, Cold Formed, Light Gage
  • A858/A858M – 19 Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
  • A859/A859M – 04(2019)e1 Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
  • A860/A860M – 18 Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings
  • A861 – 04(2017) Specification for High-Silicon Iron Pipe and Fittings
  • A862/A862M – 98(2020) Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
  • A865/A865M – 06(2017) Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
  • A866 – 18 Specification for Medium Carbon Anti-Friction Bearing Steel
  • A867 – 19 Specification for Iron-Silicon Relay Steels
  • A871/A871M – 20 Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
  • A872/A872M – 14 Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
  • A874/A874M – 98(2018)e1 Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
  • A875/A875M – 13 Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
  • A876 – 17e1 Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
  • A877/A877M – 17 Specification for Steel Wire, Chromium-Silicon Alloys, Chrome-Silicon-Vanadium Alloy Valve Spring Quality
  • A878/A878M – 19 Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
  • A879/A879M – 12(2017) Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
  • A881/A881M – 16a Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete
  • A882/A882M – 20 Specification for Filled Epoxy-Coated Seven-Wire Steel Prestressing Strand
  • A884/A884M – 19e1 Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
  • A884/A884M-SP – 19e1 Especificación de estándar para refuerzo de alambre y alambre electrosoldado de acero recubiertos con epoxi
  • A884/A884M-POR – 19e1 Especificação padrão para Reforço de fio de aço soldado e fio de aço revestido com zinco
  • A886/A886M – 17 Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
  • A887 – 20 Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
  • A888 – 20 Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
  • A889/A889M – 14(2020) Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame
  • A890/A890M – 18a Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
  • A891/A891M – 16 Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels
  • A892 – 09(2020) Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels
  • A893/A893M – 03(2015) Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
  • A895 – 89(2017) Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip
  • A896/A896M – 09(2019) Practice for Conducting Case Studies on Galvanized Structures
  • A897/A897M – 16 Specification for Austempered Ductile Iron Castings
  • A898/A898M – 17 Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
  • A899 – 91(2014) Specification for Steel Wire, Epoxy-Coated
  • A900/A900M – 01(2018) Test Method for Lamination Factor of Amorphous Magnetic Strip
  • A901 – 19 Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
  • A902 – 18a Terminology Relating to Metallic Coated Steel Products
  • A903/A903M – 99(2017) Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
  • A904 – 20 Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts
  • A905 – 19 Specification for Steel Wire, Pressure Vessel Winding
  • A906/A906M – 02(2016) Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
  • A908 – 03(2019) Specification for Stainless Steel Needle Tubing
  • A909/A909M – 06(2016) Specification for Steel Forgings, Microalloy, for General Industrial Use
  • A910/A910M – 18 Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete
  • A911/A911M – 15 Specification for Low-Relaxation Steel Bars for Prestressed Concrete Railroad Ties
  • A912/A912M – 11(2019) Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
  • A913/A913M – 19 Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
  • A914/A914M – 19 Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
  • A915/A915M – 08(2018) Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
  • A917 – 08(2020) Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
  • A918 – 06(2019) Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
  • A920/A920M – 14(2019) Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
  • A921/A921M – 93(2016) Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
  • A922 – 05(2020) Specification for Silicon Metal
  • A923 – 14 Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
  • A923-RU-RU – 14 Стандартные методы испытаний для обнаружения вредной интерметаллической фазы в двухфазных аустенито-ферритных нержавеющих сталях
  • A924/A924M – 20 Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
  • A925 – 03(2020) Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
  • A927/A927M – 18 Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
  • A928/A928M – 14 Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
  • A928/A928M-RU-RU – 14 Стандартные технические условия на трубы из нержавеющей аустенитно-ферритной (дуплексной) стали, сваренные методом электрической сварки плавлением с добавлением присадочного металла
  • A929/A929M – 18 Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
  • A930 – 09(2020) Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
  • A931 – 18 Test Method for Tension Testing of Wire Ropes and Strand
  • A932/A932M – 01(2019) Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
  • A934/A934M – 19 Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
  • A934/A934M-SP – 19 Especificación de estándar para barras de acero de refuerzo prefabricadas y con recubrimiento de epoxi
  • A934/A934M-POR – 19 Especificação padrão para Vergalhões de aço pré-fabricados revestidos com epóxi
  • A937/A937M – 12(2019) Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
  • A938 – 18 Test Method for Torsion Testing of Wire
  • A939/A939M – 15(2020) Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
  • A941 – 18 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
  • A942/A942M – 95(2018) Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells
  • A943/A943M – 01(2019) Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
  • A944 – 10(2015) Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
  • A945/A945M – 16 Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
  • A947M – 16 Specification for Textured Stainless Steel Sheet [Metric]
  • A949/A949M – 01(2019) Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
  • A950/A950M – 11(2015) Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
  • A951/A951M – 16e1 Specification for Steel Wire for Masonry Joint Reinforcement
  • A952/A952M – 02(2016) Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
  • A955/A955M – 20c Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement
  • A955/A955M-POR – 20c Especificação padrão para Barras de aço inoxidável deformadas e planas para reforço de concreto
  • A956/A956M – 17a Test Method for Leeb Hardness Testing of Steel Products
  • A956/A956M-RU-RU – 17a Стандартный метод испытания для определения твердости по Либу стальных изделий
  • A957/A957M – 20 Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
  • A958/A958M – 17 Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
  • A959 – 19 Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
  • A960/A960M – 20 Specification for Common Requirements for Wrought Steel Piping Fittings
  • A961/A961M – 20 Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
  • A962/A962M – 19 Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
  • A964/A964M – 17 Specification for Corrugated Steel Box Culverts
  • A965/A965M – 20 Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
  • A966/A966M – 15(2020) Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current
  • A967/A967M – 17 Specification for Chemical Passivation Treatments for Stainless Steel Parts
  • A970/A970M – 18 Specification for Headed Steel Bars for Concrete Reinforcement
  • A970/A970M-SP – 18 Especificación estándar para barras de acero con cabeza para refuerzo del hormigón
  • A970/A970M-POR – 18 Especificação padrão para Barras de aço com cabeça para reforço de concreto
  • A970/A970M-RU-RU – 18 Стандартные технические условия на стальные прутки с головкой для армирования бетона
  • A971/A971M – 17 Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils
  • A972/A972M – 00(2015) Specification for Fusion Bonded Epoxy-Coated Pipe Piles
  • A973/A973M – 21 Specification for Grade 100 Alloy Steel Chain
  • A974 – 97(2016) Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated)
  • A975 – 20 Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
  • A976 – 18 Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application
  • A977/A977M – 07(2020) Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
  • A979/A979M – 03(2019) Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
  • A980/A980M – 19 Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
  • A981/A981M – 11(2016) Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors
  • A981/A981M-RU-RU – 11(2016) Стандартный метод испытания для оценки прочности сцепления стальных, предварительно напрягаемых арматурных прядей диаметром 0,600 дюйма [15,24 мм], Марки 270 [1860], без покрытия, применяемых в предварительно напряженных анкерах, закапываемых в землю
  • A982/A982M – 10(2020) Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
  • A983/A983M – 06(2016) Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
  • A985/A985M – 20 Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
  • A986/A986M – 01(2016) Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
  • A987/A987M – 19 Practice for Measuring Shape Characteristics of Tin Mill Products
  • A988/A988M – 17 Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
  • A988/A988M-RU-RU – 17 Стандартные технические условия на фланцы, фитинги, трубопроводную арматуру и детали из нержавеющей стали, полученные методом горячего изостатического прессования для эксплуатации при высоких температурах
  • A989/A989M – 18 Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
  • A990/A990M – 20 Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure-Retaining Parts for Corrosive Service
  • A991/A991M – 17 Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
  • A992/A992M – 20 Specification for Structural Steel Shapes
  • A992/A992M-SP – 20 Especificación de estándar para perfiles estructurales de acero
  • A992/A992M-POR – 20 Especificação padrão para Perfis estruturais de aço
  • A994 – 18 Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
  • A995/A995M – 20 Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
  • A996/A996M – 16 Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
  • A996/A996M-SP – 16 Especificación de estándar para barras corrugadas de acero de rieles y ejes de ferrocarril para refuerzo del hormigón
  • A996/A996M-POR – 16 Especificação padrão para Barras deformadas em aço ferroviário e aço de eixo para reforço de concreto
  • A997 – 08(2018) Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
  • A998/A998M – 18 Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications
  • A999/A999M – 18 Specification for General Requirements for Alloy and Stainless Steel Pipe
  • A999/A999M-RU-RU – 18 Стандартные технические условия на общие требования к трубам из легированной и нержавеющей стали

Standar ASTM A1000-A1999

  • A1000/A1000M – 17 Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
  • A1001 – 18 Specification for High-Strength Steel Castings in Heavy Sections
  • A1002 – 16(2020) Specification for Castings, Nickel-Aluminum Ordered Alloy
  • A1003/A1003M – 15 Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
  • A1004/A1004M – 99(2018) Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
  • A1007 – 15 Specification for Carbon Steel Wire for Wire Rope
  • A1008/A1008M – 20 Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable
  • A1009 – 18 Specification for Soft Magnetic MnZn Ferrite Core Materials for Transformer and Inductor Applications
  • A1010/A1010M – 13(2018) Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip
  • A1011/A1011M – 18a Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
  • A1011/A1011M-RU-RU – 18a Стандартные технические условия на сталь, тонколистовую и полосовую, горячекатаную, углеродистую, конструкционную, высокопрочную низколегированную, высокопрочную низколегированную с улучшенной формуемостьюи сверхвысокопрочную
  • A1012 – 10(2015) Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins
  • A1013 – 00(2020) Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method
  • A1014/A1014M – 16e1 Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
  • A1015 – 01(2018) Guide for Videoborescoping of Tubular Products for Sanitary Applications
  • A1016/A1016M – 18a Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
  • A1017/A1017M – 17 Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
  • A1018/A1018M – 18 Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
  • A1021/A1021M – 20 Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service
  • A1022/A1022M – 16b Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
  • A1022/A1022M-SP – 16b Especificación estándar para alambres de acero inoxidable corrugados y lisos, y alambre soldado para refuerzo de hormigón
  • A1022/A1022M-POR – 16b Especificação padrão para Fio de aço inoxidável deformado e liso e fio soldado para reforço de concreto
  • A1023/A1023M – 19 Specification for Carbon Steel Wire Ropes for General Purposes
  • A1024/A1024M – 18 Specification for Steel Line Pipe, Black, Plain-End, Seamless
  • A1025/A1025M – 10(2020) Specification for Ferroalloys and Other Alloying Materials, General Requirements
  • A1028 – 03(2015) Specification for Stainless Steel Bars for Compressor and Turbine Airfoils
  • A1030/A1030M – 16 Practice for Measuring Flatness Characteristics of Steel Sheet Products
  • A1031/A1031M – 12(2017) Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
  • A1032 – 15(2019) Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe
  • A1033 – 18 Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
  • A1034/A1034M – 10a(2015) Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
  • A1035/A1035M – 20 Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement
  • A1036 – 04(2020) Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers
  • A1038 – 19 Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
  • A1039/A1039M – 20 Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, and Ultra-High Strength, Produced by Twin-Roll Casting Process
  • A1040 – 17 Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
  • A1040-RUS – 17 СТАНДАРТНОЕ РУКОВОДСТВО ПО УСТАНОВЛЕНИЮ ГАРМОНИЗИРОВАННЫХ СТАНДАРТНЫХ СОСТАВОВ ДЛЯ МАРОК ДЕФОРМИРУЕМОЙ УГЛЕРОДИСТОЙ, НИЗКОЛЕГИРОВАННОЙ И ЛЕГИРОВАННОЙ СТАЛИ
  • A1043/A1043M – 18 Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
  • A1044/A1044M – 16ae1 Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
  • A1044/A1044M-SP – 16ae1 Especificación de estándar para conjuntos de espárragos de acero de refuerzo para esfuerzo cortante del hormigón
  • A1044/A1044M-POR – 16ae1 Especificação padrão para Conjuntos de montantes de aço para reforço de cisalhamento de concreto
  • A1045 – 10(2017) Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems
  • A1046/A1046M – 19 Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
  • A1047/A1047M – 05(2019) Test Method for Pneumatic Leak Testing of Tubing
  • A1049/A1049M – 18 Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
  • A1053/A1053M – 12(2017) Specification for Welded Ferritic-Martensitic Stainless Steel Pipe
  • A1054 – 16 Specification for Sintered Ferrite Permanent Magnets
  • A1055/A1055M – 16 Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
  • A1055/A1055M-SP – 16 Especificación estándar para conjuntos de espárragos de acero para refuerzo de esfuerzo cortante del hormigónEspecificación estándar para barras de acero de refuerzo con doble recubrimiento de zinc y epoxi
  • A1055/A1055M-POR – 16 Especificação padrão para Vergalhões de aço com revestimento duplo de zinco e epóxi
  • A1056 – 20 Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings
  • A1057/A1057M – 08(2019) Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
  • A1058 – 19 Test Methods for Mechanical Testing of Steel Products—Metric
  • A1059/A1059M – 18 Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products
  • A1060/A1060M – 16b Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
  • A1060/A1060M-SP – 16b Especificación estándar para refuerzo de alambre soldado de acero (galvanizado) revestido en zinc, liso y corrugado, para hormigón
  • A1060/A1060M-POR – 16b Especificação padrão para Reforço de fio soldado de aço com revestimento de zinco (galvanizado), liso e deformado, para concreto
  • A1061/A1061M – 20ae1 Test Methods for Testing Multi-Wire Steel Prestressing Strand
  • A1062 – 10(2020) Specification for Steel Castings Sampling
  • A1063/A1063M – 20 Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
  • A1064/A1064M – 18a Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
  • A1064/A1064M-SP – 18a Especificación estándar para refuerzo de alambre soldado y alambre de acero al carbono, liso y corrugado, para hormigón
  • A1064/A1064M-POR – 18a Especificação padrão para Reforço de fio de aço carbono e fio soldado, liso e deformado, para concreto
  • A1065/A1065M – 18 Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point
  • A1066/A1066M – 11(2015)e2 Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)
  • A1067/A1067M – 12a(2018) Specification for Test Coupons for Steel Castings
  • A1068 – 10(2020) Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products
  • A1069/A1069M – 19 Specification for Laser and Laser Hybrid Welded Stainless Steel Bars, Plates, and Shapes
  • A1070 – 16 Specification for Cast and Sintered Alnico Permanent Magnets
  • A1071/A1071M – 11(2015) Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys
  • A1072/A1072M – 11(2020) Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products
  • A1073/A1073M – 17 Practice for Using Hand Micrometers to Measure the Thickness of Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet
  • A1074 – 11(2020) Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals
  • A1075 – 12(2017)e1 Specification for Flanged Steel U-Channel Posts
  • A1076/A1076M – 20 Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel
  • A1077/A1077M – 14 Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings
  • A1078/A1078M – 19 Specification for Epoxy-Coated Steel Dowels for Concrete Pavement
  • A1079 – 17 Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
  • A1080/A1080M – 19 Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings
  • A1081/A1081M – 15 Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand
  • A1082/A1082M – 16 Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
  • A1083/A1083M – 12(2017) Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
  • A1084 – 15a Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels
  • A1085/A1085M – 15 Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
  • A1085/A1085M-SP – 15 Especificación estándar para secciones estructurales huecas de acero al carbono soldadas conformadas en frío (HSS)
  • A1086 – 20 Specification for Thin-Gauge Nonoriented Electrical Steel Fully Processed Types
  • A1087/A1087M – 16 Practice for Using Hand Calipers to Measure the Width of Steel Sheet
  • A1088 – 13(2019) Specification for Steel, Sheet, Cold-Rolled, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP)
  • A1089/A1089M – 14(2020) Specification for Highly Loaded Anti-Friction Bearing Steel
  • A1090/A1090M – 19 Specification for Forged Rings and Hollows for Use as Base Plates in Power Transmission Structures
  • A1091/A1091M – 16e1 Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service
  • A1092 – 15(2020) Specification for Steel Sheet, as Cold-Reduced, for Conversion to Annealed Cold-Rolled Steel Sheet, and Hot Dip Metallic-Coated Steel Sheet
  • A1093/A1093M – 15(2020)e1 Specification for Electrolytic Plasma Treatment Processing of Conductive Materials
  • A1094/A1094M – 20 Specification for Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcement
  • A1095 – 15(2019) Specification for High-Silicon Molybdenum Ferritic Iron Castings
  • A1096/A1096M – 15 Test Method for Evaluating Bond of Individual Steel Wire, Indented or Plain, for Concrete Reinforcement
  • A1097 – 16 Specification for Steel Casing Pipe, Electric-Fusion (Arc)-Welded (Outside Diameter of 10 in. and Larger)
  • A1098/A1098M – 18 Specification for Welded Austenitic, Ferritic, Martensitic and Duplex Stainless Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s)
  • A1099/A1099M – 20 Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels
  • A1100 – 16 Guide for Qualification and Control of Induction Heat Treating
  • A1101 – 16 Specification for Sintered and Fully Dense Neodymium Iron Boron (NdFeB) Permanent Magnets
  • A1102 – 19 Specification for Sintered Samarium Cobalt (SmCo) Permanent Magnets
  • A1103/A1103M – 16 Specification for Seamless Cold-Finished Carbon Steel Structural Frame Tubing for Automotive Racing Applications
  • A1105 – 17 Specification for Corrugated Steel Manhole Assemblies
  • A1106/A1106M – 17 Specification for Pressure Vessel Plate, Alloy Steel, Austenitic High Manganese for Cryogenic Application
  • A1107/A1107M – 17 Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Steel Drainage Pipes
  • A1108 – 17 Test Method for Determining the Ultimate Strength of Deep Corrugated Structural Plate Bolted Longitudinal Lapped Seams
  • A1109 – 18 Specification for Special Fittings for Single-Stack Hubless Cast Iron Soil Pipe Fittings for Sanitary, Waste, and Vent Piping Applications
  • A1110/A1110M – 18 Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes with 52 KSI [360 MPa] Minimum Yield Strength and Impact Requirements
  • A1111 – 18 Specification for Cast Iron Closet Flanges for Use With Cast Iron Soil Pipe and Fittings in Gravity Flow Plumbing Drain, Waste, and Vent Sanitary Applications
  • A1112/A1112M – 18 Specification for Cold-Formed Welded High Strength Carbon Steel or High-Strength Low-Alloy Steel Hollow Structural Sections (HSS) in Rounds and Shapes
  • A1113/A1113M – 20 Specification for Corrugated Steel Structural Plate, Polymer-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
  • A1114/A1114M – 20 Specification for Low-Relaxation, Seven-Wire, Grade 240 [1655], Stainless Steel Strand for Prestressed Concrete
  • A1115/A1115M – 19 Practice for Construction of Mechanically Stabilized Earth Walls with Inextensible Soil Reinforcement
  • A1119 – 20 Specification for Welded Partially Corrugated Tube for Potable Water and General Servic
  • Withdrawn Standards[edit]
  • A42/A42M – Specification for Wrought Iron Plates (Last edition published 1966, withdrawn 1972)
  • A167 – Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip (Withdrawn 2014, no replacement)
  • A325/A325M – Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength (Withdrawn 2016, replaced by F3125/F3125M)
  • A490/A490M – Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength (Withdrawn 2016, replaced by F3125/F3125M)
  • A570 – Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled (Withdrawn 2000, replaced by A1011/A1011M)

Standar ASTM B hingga G

Daftar Standar ASTM Internasional selanjutnya dapat dibuka pada artikel dari standarku.com yang lain.

Demikian artikel dari standarku.com mengenai Daftar standar ASTM Internasional kode A.

Mohon saran dari pembaca untuk kelengkapan isi artikel ini, silahkan saran tersebut dapat disampaikan melalui kolom komentar.

Baca artikel lain :

Sumber referensi :

Leave a Comment