Daftar Standar IEEE Power and Energy 4

Daftar Standar IEEE Power and Energy 4 adalah kumpulan judul standar IEEE dengan lingkup : Power and Energy sub part 4.

Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi IEEE, yang penamaan nya diawali dengan kode “IEEE”.

IEEE SA (Standards Association) adalah organisasi pembangun konsensus terkemuka yang memelihara, mengembangkan, dan memajukan teknologi global, melalui IEEE.

Artikel ini adalah lanjutan dari artikel sebelumnya dari standarku.com mengenai organisasi IEEE SA berikut :

Jadi artikel ini ditujukan untuk membantu pembaca dalam mencari apa saja judul standar IEEE yang dibutuhkan.

Untuk mempermudah pencarian judul standar, disini kami cantumkan pembagian berdasarkan klasifikasi berikut.

Klasifikasi Standar IEEE

Standar IEEE dibagi menjadi 21 klasifikasi sebagaimana berikut :

  1. Aerospace Electronics
  2. Antennas and Propagation
  3. Batteries
  4. Blockchain
  5. Communications
  6. Computer Technology
  7. Consumer Electronics
  8. Electromagnetic Compatibility
  9. Green and Clean Technology
  10. Healthcare IT
  11. Industry Applications
  12. Instrumentation and Measurement
  13. Nanotechnology
  14. National Electrical Safety Code (NESC)
  15. Nuclear Power
  16. Power and Energy
  17. Power Electronics
  18. Smart Grid
  19. Software and Systems Engineering
  20. Transportation
  21. Wired and Wireless Communications

Dikarenakan standar IEEE sangat banyak jumlahnya, maka akan dibagi menjadi beberapa artikel seri Daftar Standar IEEE.

Pada artikel sebelumnya mencakup kategori yang pertama hingga ke 15 sebagaimana berikut :

Pada artikel kali ini mencakup kategori yang ke 16 (part 16) yakni : Power and Energy.

Kategori Power and Energy memiliki jumlah standar yang sangat banyak, oleh karena itu kami bagi lagi menjadi beberapa sub part artikel.

Artikel ini merupakan sebagian daftar judul dari kategori Power and Energy untuk sub part 4.

Kategori lain akan dilanjutkan pada artikel dari standarku.com berikutnya.

Kolaborasi Organisasi Pengembang Standar

Pada beberapa judul artikel di kategori ini ada yang merupakan hasil kolaborasi antara IEEE dengan organisasi pengembang standar lain seperti :

  • ISO (International Organization for Standardization), adalah suatu organisasi atau lembaga nirlaba internasional, yang bertujuan untuk membuat dan memperkenalkan standar dan standardisasi internasional untuk berbagai tujuan.
  • IEC, adalah organisasi standardisasi internasional yang menyusun dan menerbitkan standar-standar internasional untuk seluruh bidang elektrik, elektronik dan teknologi yang terkait atau bidang teknologi elektro (electrotechnology).
  • ANSI (American National Standards Institute), adalah organisasi nirlaba swasta yang mengawasi pengembangan standar yang disetujui secara sukarela untuk produk, layanan, proses, sistem, dan personel di Amerika Serikat.

Seperti yang ditunjukkan pada judul dengan kode awalan nama gabungan sebagaimana berikut :

  • IEEE/IEC
  • IEEE/ISO/IEC
  • IEEE/ISO
  • IEEE/ANSI
  • ANSI/AAMI
  • IEEE/AIEE

Lebih jelas mengenai organisasi pengembang standar lain diatas dapat dibaca pada artikel lain dari standarku.com berikut :

Daftar Standar IEEE

Berikut adalah judul standar-standar IEEE part 16 yang dikutip dari ieee.org per 25 Agustus 2021 :

Daftar Standar IEEE Power and Energy 4

  • IEEE C37.20.6-2007 – IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures
  • IEEE C37.26-1972 – IEEE Standard Guide for Methods of Power-Factor Measurement for Low-Voltage Inductive Test Circuits
  • IEEE C37.30-1971 – American National Standard Definitions and Requirements for High-Voltage Air Switches, Insulators, and Bus Supports
  • IEEE C37.30-1992 – IEEE Standard Requirements for High Voltage Air Switches
  • IEEE C37.34a-1978 – IEEE Standard Test Code for High-Voltage Air Switches, Corona Tests Supplement to ANSI/IEEE C37.34-1971
  • IEEE C37.34d-1984 – Standard Test Code for High-Voltage Air Switches, Mechanical Operations Test
  • IEEE C37.38-1989 – IEEE Standard for Gas Insulated, Metal-Enclosed Disconnecting, Interrupter, and Grounding Switches
  • IEEE C37.40-2003 – IEEE Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
  • IEEE C37.40b-1996 – IEEE Standard Service Conditions and Definitions for External Fuses for Shunt Capacitors
  • IEEE C37.41-1988 – IEEE Standard Design Tests for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
  • IEEE C37.41-1994 – IEEE Standard Design Tests for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches and Accessories
  • IEEE C37.41e-1996 – IEEE Standard Design Tests for External Fuses for Shunt Capacitors – Supplement to IEEE Std C37.41-1994
  • IEEE C37.47-2011 – IEEE Standard Specifications for High-Voltage (>1000 V) Distribution Class Current-Limiting Type Fuses and Fuse Disconnecting Switches
  • IEEE C37.61-1973 – IEEE Standard Guide for the Application, Operation, and Maintenance of Automatic Circuit Reclosers
  • IEEE C37.63-1997 – IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault and Submersible Automatic Line Sectionalizers for AC Systems
  • IEEE C37.71-2001 – IEEE Standard for Three-Phase Manually Operated Subsurface and Vault Load-Interrupting Switches for Alternating-Current Systems
  • IEEE C37.73-1998 – IEEE Standard Requirements for Pad-Mounted Fused Switchgear
  • IEEE C37.90.1-1989 – IEEE Standard Surge Withstand Capability (SWC) Tests for Protective Relays and Relay Systems
  • IEEE C37.90.2-1987 – IEEE Trial-Use Standard Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from Transceivers
  • IEEE C57.100-2011 – IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Liquid-Immersed Distribution and Power Transformers
  • IEEE C57.12.01-1989 – IEEE Standard General Requirements for Dry-Type Distribution and Power Transformers Including Those with Solid Cast and/or Resin-Encapsulated Windings
  • IEEE C57.12.60-1992 – IEEE Trial-Use Standard Test Procedures for Thermal Evaluation of Insulation Systems for Solid-Cast and Resin-Encapsulated Power and Distribution Transformers
  • IEEE C57.12.90-1999 – IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers
  • IEEE C57.19.01-2017 – IEEE Standard for Performance Characteristics and Dimensions for Power Transformer and Reactor Bushings
  • IEEE C95.2-1999 – IEEE Standard for Radio-Frequency Energy and Current-Flow Symbols
  • IEEE/ANSI 18-1980 – IEEE Standard for Shunt Power Capacitors
  • IEEE/ANSI C37.95-1973 – American National Standard Guide for Protective Relaying of Utility – Consumer Interconnections
  • IEEE/ANSI C50.14-1977 – American National Standard Requirements for Combustion Gas Turbine Driven Cylindrical Rotor Synchronous Generators
  • IEEE/ASA C37.12-1952 – ASA American Standard Guide Specifications for Alternating Current Power Circuit Breakers
  • IEEE/ASA C57.12.10-1958 – American Standard Requirements, Terminology, and Test Code for Distribution, Power, and Regulating Transformers, and Reactors other than Current Limiting Reactors
  • IEEE/ANSI C135.38-1987 – American National Standard for Zinc-Coated Ferrous Washer Head Bolts and Washer Nuts
  • ANSI/IEEE C37.48a-1980 – ANSI Draft American National Standard Guide for Application od Current limiting Fuses in Enclosures
  • IEEE 1003.2a-1992 – IEEE Standard for Information Technology–Portable Operating System Interfaces (POSIX(TM))–Part 2: Shell and Utilities, User Portability Extension
  • IEEE 1058a-1998 – IEEE Supplement to Standard for Software Project Management Plans
  • IEEE 1286-1997 – IEEE Standard for 4.76 kV to 38 kV Rated Grounding and Testing Devices Used in Enclosures
  • IEEE 1318-1993 – Standard for Wrought Steel Enclosures for Gas-Filled High-Voltage Switchgear & Controlgear CENELEC EN 50 068:1991
  • IEEE 1319-1993 – Standard for Cast Aluminum Alloy Enclosures for Gas-Filled High-Voltage Switchgear & Controlgear CENELEC EN 50 052:1990 & Amendment A1:1990
  • IEEE 1321-1993 – Standard for Wrought Aluminum Enclosures for Gas-Filled High-Voltage Switchgear & Controlgear CENELEC EN 50 064:1989
  • IEEE 1322-1993 – Standard for Welded Composite Enclosures of Cast and Wrought Aluminum Alloys for Gas-Filled High-Voltage Switchgear & Controlgear CENELEC EN 50 069:1991
  • IEEE 567 – IEEE Trial-Use Standard Criteria for the Design of the Control Room Complex for a Nuclear Power Generating Station
  • IEEE C12.16-1991 – American National Standard for Solid-State Electricity Meters
  • IEEE C37.100-1981 – IEEE Standard Definitions for Power Switchgear
  • IEEE C37.11-1991 – IEEE Standard Requirements for Electrical Control for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis or a Total Current Basis
  • IEEE C37.122a-1991 – IEEE Supplement to IEEE C37.122-1983, IEEE Standard Gas-Insulated Substations (Section 2.2.2: Pressurized Enclosures)
  • IEEE C37.20.3-1996 – Standard for Metal-Enclosed Interrupter Switchgear
  • IEEE C37.34-1971 – IEEE Standard Test Code for High Voltage Air Switches
  • IEEE C57.12.40-1993 – Standard for Requirements for Secondary Network Transformers – Subway and Vault Types (Liquid Immersed)
  • IEEE/IEC C37.60/62271-111 – IEEE/IEC International Draft Standard for Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV
  • IEEE/AIEE 78-1960 – AIEE-FEMA-NEMA Standards Publication for Arc Furnace Transformer
  • AIEE 12-1934 – AIEE Standards for Constant Current Transformers of the Moving Coil Type
  • AIEE 15-1928 – A.I.E.E. Standards: Industrial Control Apparatus
  • AIEE 18-1934 – AIEE Standards for Capacitors
  • AIEE 19-1943 – AIEE Standards for Alternating Current Power Circuit Breakers
  • AIEE 1B-1944 – AIEE Report on Guiding Principles for the Specification of Service Conditions in Electrical Standards
  • AIEE 22-1925 – AIEE Standards Disconnecting and Horn Gap Switches
  • IEEE C57.144-2004 – IEEE Guide for Metric Conversion of Transformer Standards
  • IEEE/AIEE 28-1944 – AIEE American Standards for Lightning Arresters for Alternating Current Power Circuits
  • IEEE/AIEE 38-1934 – AIEE Standards for Electric Arc Welding Apparatus
  • IEEE 155-1960 – IEEE Standards on Circuits: Definitions of Terms for Linear Signal Flow Graphs, 1960
  • IEEE 156-1960 – IRE Standards on Circuits: Definitions of Terms for Linear Passive Reciprocal Time Invariant Networks, 1960
  • IEEE 159-1952 – IEEE Standards on Gas-Filled Radiation Counter Tubes: Methods of Testing, 1952
  • IEEE 169-1955 – IEEE Standards on Industrial Electronics: Definitions of Industrial Electronics Terms, 1955
  • IEEE 216-1960 – IRE Standards on Solid-State Devices: Definitions of Semiconductor Terms
  • ANSI C57.1, C57.2 C57.3-1942 – ANSI American Standards for transformers, Regulators, and Reactors
  • C37.4a-1958 – IEEE American Standards Electrical Characteristics of Power Circuit Breaker Bushings and Dimensions of Power Circuit Breaker Bushings, Their Mountings and Bushing Current Transformers
  • IEEE C57-2002 – IEEE Standards Collection Special Edition: Power Distribution & Regulator Transformers on CD- ROM
  • IEEE 11073-10408-2008 – IEEE Health informatics–Personal health device communication Part 10408: Device specialization — Thermometer
  • IEEE 11073-10425-2017 – IEEE Health informatics–Personal health device communication – Part 10425: Device Specialization–Continuous Glucose Monitor (CGM)
  • IEEE C135.64-2012 – IEEE Guide for Slip and Pull-Out Strength Testing of Bolted Dead End Strain Clamps
  • IEEE 1227-1990 – IEEE Guide for the Measurement of DC Electric-Field Strength and Ion Related Quantities
  • IEEE 1260-1996 – IEEE Guide on the Prediction, Measurement, and Analysis of AM Broadcast Reradiation by Power Lines
  • IEEE 1260-2018 – IEEE Guide on the Prediction,Measurement, and Analysis of AM Broadcast Reradiation by Power Lines
  • IEEE 1308-1994 – IEEE Recommended Practice for Instrumentation: Specifications for Magnetic Flux Density and Electric Field Strength Meters – 10 Hz to 3 kHz
  • IEEE 1542-2007 – IEEE Guide for Installation, Maintenance, and Operation of Irrigation Equipment Located Near or Under Power Lines
  • IEEE 1542-2018 – IEEE Guide for Installation, Maintenance, and Operation of Irrigation Equipment Located Near or Under Power Lines
  • IEEE 1829-2017 – IEEE Guide for Conducting Corona Tests on Hardware for Overhead Transmission Lines and Substations
  • IEEE 2746-2020 – IEEE Guide for Evaluating AC Interference on Linear Facilities Co-Located Near Transmission Lines
  • IEEE C62.37.1-2000 – IEEE Guide for the Application of Thyristor Surge Protective Devices
  • IEEE C62.37.1-2012 – IEEE Guide for the Application of Thyristor Surge Protective Device Components
  • IEEE C62.43-1999 – IEEE Guide for the Application of Surge Protectors Used in Low-Voltage (Less Than Or Equal To 1000 Vrms or 1200 Vdc) Data, Communications, and Signaling Circuits
  • IEEE C37.48-1987 – IEEE Guide for Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
  • IEEE C37.48-1997 – IEEE Guide for the Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
  • IEEE 1662-2016 – IEEE Recommended Practice for the Design and Application of Power Electronics in Electrical Power Systems
  • IEEE 844-2000 – IEEE Recommended Practice for Electrical Impedance, Induction, and Skin Effect Heating of Pipelines and Vessels
  • IEEE 1453-2015 – IEEE Recommended Practice for the Analysis of Fluctuating Installations on Power Systems
  • IEEE 1453.1-2012 – IEEE Guide–Adoption of IEC/TR 61000-3-7:2008, Electromagnetic compatibility (EMC)–Limits–Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems
  • IEEE 1692-2011 – IEEE Guide for the Protection of Communication Installations from Lightning Effects
  • IEEE 1137-1991 – IEEE Guide for the Implementation of Inductive Coordination Mitigation Techniques and Application
  • IEEE 1590-2003 – IEEE Recommended Practice for the Electrical Protection of Optical Fiber Communication Facilities Serving, or Connected to, Electrical Supply Locations
  • IEEE 487-2000 – IEEE Recommended Practice for the Protection of Wire-Line Communication Facilities Serving Electric Supply Locations
  • IEEE 622-1987 – IEEE Recommended Practice for the Design and Installation of Electric Heat Tracing Systems for Nuclear Power Generating Systems
  • IEEE 776-1992 – IEEE Recommended Practice for Inductive Coordination of Electric Supply and Communication Lines
  • IEEE C62.55-2017 – IEEE Guide for Surge Protection of DC Power Feeds to Remote Radio Heads
  • IEEE C62.55-2020 – IEEE Guide for Surge Protection of DC Power Feeds to Remote Radio Heads
  • IEEE 1313.2-1999 – IEEE Guide for the Application of Insulation Coordination
  • IEEE 484-2002 – IEEE Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications
  • IEEE 1133-1988 – IEEE Application Guide for Evaluating Nonceramic Materials for High-Voltage Outdoor Applications
  • IEEE 538-1976 – IEEE Low Voltage AC Integrally Fused Power Circuit Breakers
  • IEEE 620-1996 – IEEE Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines
  • IEEE 86-1987 – IEEE Recommended Practice: Definitions of Basic Per-Unit Quantities for AC Rotating Machines
  • IEEE C37.81-2017 – IEEE Guide for Seismic Qualification of Class 1E Metal-Enclosed Power Switchgear Assemblies
  • IEEE C57.129-1999 – IEEE General Requirements and Test Code for Oil Immersed HVDC Converter Transformers
  • IEEE/ANSI 213-1961 – ANSI/IEEE Radio Interference: Methods of Measurement of Conducted Interference Output to the Power Line from FM and Television Broadcast Receivers in the Range of 300 kHz to 25 MHz
  • IEEE 1792-2011 – IEEE Recommended Practice for Nuclear Power Generating Station (NPGS) Preferred Power Supply (PPS) Reliability
  • IEC 62271-111-2005 – IEC 62271-111 Ed.1 (IEEE Std C37.60-2003-Compilation): High Voltage Switchgear and Control gear — Part 111: Overhead, Pad-Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for alternating current systems up to 38 kV
  • IEEE 1683-2014 – IEEE Guide for Motor Control Centers Rated up to and including 600 V AC or 1000 V DC with Recommendations Intended to Help Reduce Electrical Hazards
  • IEEE C2-1977 – National Electrical Safety Code, 1997 Edition
  • IEEE C37.81-1989 – IEEE Guide for Seismic Qualification of Class 1E Metal-Enclosed Power Switchgear Assemblies
  • IEEE 1137-1991/Cor 1-2009 – IEEE Guide for the Implementation of Inductive Coordination Mitigation Techniques and Applications–Corrigendum 1
  • IEEE 421.4-2004 – IEEE Guide for the Preparation of Excitation System Specifications
  • IEEE C62.72-2007 – IEEE Guide for the Application of Surge Protective Devices for Low Voltage (1000 Volts or Less) AC Power Circuits
  • IEEE C62.72-2016 – IEEE Guide for the Application of Surge-Protective Devices for Use on the Load Side of Service Equipment in Low-Voltage (1000 V or Less, 50 Hz or 60 Hz) AC Power Circuits
  • IEEE C62.72a-2020 – IEEE Guide for the Application of Surge-Protective Devices for Use on the Load Side of Service Equipment in Low-Voltage (1000 V or Less, 50 Hz or 60 Hz) AC Power Circuits–Amendment 1: SPD Disconnector Application Considerations and Coordination
  • IEEE 1095-1989 – IEEE Guide for Installation of Vertical Generators and Generator/Motors for Hydroelectric Applications
  • IEEE 1158-1991 – IEEE Recommended Practice for Determination of Power Losses in High-Voltage Direct-Current (HVDC) Converter Stations
  • IEEE 22A-1962 – IEEE Guide for the Application of Interrupter Switches to Switch Capacitance Loads
  • IEEE 256-1963 – IEEE Test Procedure for Semiconductor Diodes
  • IEEE 421.6-2017 – IEEE Recommended Practice for the Specification and Design of Field Discharge Equipment for Synchronous Machines
  • IEEE 94-1991 – IEEE Recommended Definitions of Terms for Automatic Generation Control on Electric Power Systems
  • IEEE 96-1969 – IEEE General Principles for Rating Electric Apparatus for Short-Term, Intermittent, or Varying Duty
  • IEEE 999-1992 – IEEE Recommended Practice for Master/Remote Supervisory Control and Data Acquisition (SCADA) Communications
  • IEEE C37.011-2005 – IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers
  • IEEE C37.011-2011 – IEEE Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers
  • IEEE C37.011-2019 – IEEE Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers with Rated Maximum Voltage above 1000 V
  • IEEE C37.121-2012 – IEEE Guide for Switchgear – Unit Substation – Requirements
  • IEEE C37.24-1986 – IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear
  • IEEE C57.135-2001 – IEEE Guide for the Application, Specification, and Testing of Phase-Shifting Transformers
  • IEEE/AIEE 46-1927 – AIEE Hard Drawn Aluminum Conductors Physical and Electrical Properties
  • IEEE/ANSI 320-1972 – IEEE Application Guide for High Voltage Circuit Breakers Rated on a symmetrical current Basis
  • IEEE/ASA C37.22-1959 – ASA Automatic Circuit Reclosers and Automatic Line Sectionalizers for Alternating Current Systems
  • IEEE 1110-2002 – IEEE Guide for Synchronous Generator Modeling Practices and Applications in Power System Stability Analyses
  • IEEE 643-2004/Cor 1-2013 – IEEE Guide for Power-Line Carrier Applications Corrigendum 1: Modal Analysis Power Equation Correction
  • IEEE 1679-2020 – IEEE Recommended Practice for the Characterization and Evaluation of Energy Storage Technologies in Stationary Applications
  • IEEE 62032-2012 – IEC 62032:2012(E)(IEEE Std C57.135-2011) Guide for the Application, Specification, and Testing of Phase-Shifting Transformers
  • IEEE 937-2000 – IEEE Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) Systems
  • IEEE C57.135-2011 – IEEE Guide for the Application, Specification, and Testing of Phase-Shifting Transformers
  • IEEE C62.41-1980 – IEEE Guide for Surge Voltages in Low-Voltage AC Power Circuits
  • IEEE C62.41-1991 – IEEE Recommended Practice for Surge Voltages in Low-Voltage AC Power Circuits
  • IEEE 1010-1987 – IEEE Guide for Control of Hydroelectric Power Plants
  • IEEE 1020-1988 – IEEE Guide for Control of Small Hydroelectric Power Plants
  • IEEE 1119-1988 – IEEE Guide for Fence Safety Clearances in Electric-Supply Stations
  • IEEE 1207-2004 – IEEE Guide for the Application of Turbine Governing Systems for Hydroelectric Generating Units
  • IEEE 1249-1996 – IEEE Guide for Computer-Based Control for Hydroelectric Power Plant Automation
  • IEEE 125-1988 – IEEE Recommended Practice for Preparation of Equipment Specifications for Speed-Governing of Hydraulic Turbines Intended to Drive Electric Generators
  • IEEE 1484.13.5-2013 – IEEE Recommended Practice for Learning Technology — IETF RFC 4287 — Atom Syndication Format— Mapping to the Conceptual Model for Resource Aggregation
  • IEEE 1484.13.6-2015 – IEEE Recommended Practice for Learning Technology – Open Archives Initiative Object Reuse and Exchange Abstract Model (OAI-ORE) – Mapping to the Conceptual Model for Resource Aggregation
  • IEEE 519-2014 – IEEE Recommended Practice and Requirements for Harmonic Control in Electric Power Systems
  • IEEE C57.12.51-2019 – IEEE Guide for Mechanical Interchangeability of Ventilated Dry-Type Transformers
  • IEEE C57.12.51-2019 – IEEE Guide for Mechanical Interchangeability of Ventilated Dry-Type Transformers
  • AIEE 72 and 73-1932 – AIEE Specifications for Weatherproof Wires and Cables and Heat Resisting Wires and Cables
  • ANSI/IEEE 386-1977 – ANSI/IEEE Separable Insulated Connector Systems for Power Distribution Systems above 600 V
  • ANSI/IEEE 450-1980 – IEEE Recommended Practice for Maintenance, Testing , and Replacement of Large Lead Storage Batteries for Generating Stations and Substations
  • ANSI/IEEE 620-1981 – IEEE Trial Use Guide for Construction and Interpretation of Thermal Limit Curves for Squirrel-Cage Motors Over 500 hp
  • ANSI/IEEE C37.23-1969 – ANSI/IEEE Guide for Calculating Losses in Isolated Phase Bus
  • ANSI/IEEE C37.5-1979 – IEEE Guide for Calculation of Fault Currents for Application of AC High-Voltage Circuit Breakers Rated on a Total Current Basis
  • IEEE 1021-1988 – IEEE Recommended Practice for Utility Interconnection of Small Wind Energy Conversion Systems
  • IEEE 1026-1995 – IEEE Recommended Practice for Test Methods for Determination of Compatibility of Materials With Conductive Polymeric Insulation Shields and Jackets
  • IEEE 1046-1991 – IEEE Application Guide for Distributed Digital Control and Monitoring for Power Plants
  • IEEE 1064-1991 – IEEE Guide for Multifactor Stress Functional Testing of Electrical Insulation Systems
  • IEEE 1069-1991 – IEEE Recommended Practice for Precipitator and Baghouse Hopper Heating Systems
  • IEEE 1129-1992 – IEEE Recommended Practice for Monitoring and Instrumentation of Turbine Generators
  • IEEE 1129-2014 – IEEE Guide for Online Monitoring of Large Synchronous Generators (10 MVA and Above)
  • IEEE 1150-1991 – IEEE Recommended Practice for Integrating Power Plant Computer-Aided Engineering (CAE) Applications
  • IEEE 1181-1991 – IEEE Recommended Practice for Latchup Test Methods for CMOS and BiCMOS Integrated- Circuit Process Characterization
  • IEEE 119-1974 – IEEE Recommended Practice for General Principles of Temperature Measurement as Applied to Electrical Apparatus
  • IEEE 1333-1994 – IEEE Guide for Installation of Cable Using the Guided Boring Method
  • IEEE 1406-2020 – IEEE Guide for the Use of Gas-in-Fluid Analysis for Paper and Laminated Paper-Polypropylene Insulated Cable Systems
  • IEEE 1434-2014 – IEEE Guide for the Measurement of Partial Discharges in AC Electric Machinery
  • IEEE 1534-2009 – IEEE Recommended Practice for Specifying Thyristor-Controlled Series Capacitors
  • IEEE 1572-2004 – IEEE Guide for Application of Composite Line Post Insulators
  • IEEE 1889-2018 – IEEE Guide for Evaluating and Testing the Electrical Performance of Energy Saving Devices
  • IEEE 21-1976 – IEEE General Requirements and Test Procedure for Outdoor Apparatus Bushings
  • IEEE 275-1981 – IEEE Recommended Practice for Thermal Evaluation of Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils, Machines Rated 6900 V and Below
  • IEEE 277-1994 – IEEE Recommended Practice for Cement Plant Power Distribution
  • IEEE 3004.3-2020 – IEEE Recommended Practice for the Application of Low-Voltage Fuses in Industrial and Commercial Power Systems
  • IEEE 304-1977 – IEEE Test Procedure for Evaluation and Classification of Insulation Systems for Direct-Current Machines
  • IEEE 328-1971 – IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers rated on a symmetrical current basis.
  • IEEE 336-2010 – IEEE Recommended Practice for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities
  • IEEE 386-1974 – IEEE Separable Insulated Connector Systems for Power Distribution Systems above 600 V
  • IEEE 415-1976 – IEEE Guide for Planning of Pre-operational Testing Programs for Class 1E Power Systems for Nuclear Power Generating Stations
  • IEEE 469-1977 – IEEE Recommended Practice for Voice-Frequency Electrical-Noise Tests of Distribution Transformers
  • IEEE 469-1988 – IEEE Recommended Practice for Voice-Frequency Electrical-Noise Tests of Distribution Transformers
  • IEEE 484-1981 – IEEE Recommended Practice for Installation Design and Installation of Large Lead Storage Batteries for Generating Stations and Substations
  • IEEE 484-1987 – IEEE Recommended Practice for Installation Design and Installation of Large Lead Storage Batteries for Generating Stations and Substations
  • IEEE 485-1983 – IEEE Recommended Practice for Sizing Large Lead Storage Batteries for Generating Stations and Substations
  • IEEE 55-1953 – IEEE Guide for Temperature Correlation in the Connection of Insulated Wire and Cables to Electronic Equipment
  • IEEE 575-1988 – IEEE Guide for Application of Sheath-Bonding Methods for Single-Conductor Cables and the Calculation of Induced Voltages and Currents in Cable Sheaths
  • IEEE 576-1989 – IEEE Recommended Practice Installation, Termination, and Testing of Insulated Power Cable as Used in the Petroleum and Chemical Industry
  • IEEE 588-1976 – IEEE Guide for AC Motor Protection
  • IEEE 622B-1988 – IEEE Recommended Practice for Testing and Startup Procedures for Electric Heat Tracing Systems for Power Generating Stations
  • IEEE 635-1989 – IEEE Guide for Selection and Design of Aluminum Sheaths for Power Cables
  • IEEE 67-1972 – IEEE Guide for Operation and Maintenance of Turbine Generators
  • IEEE 739-1984 – IEEE Recommended Practice for Energy Conservation and Cost-Effective Planning in Industrial Facilities
  • IEEE 739-1995 – IEEE Recommended Practice for Energy Management in Industrial and Commercial Facilities
  • IEEE 76-1974 – IEEE Guide for Acceptance and Maintenance of Transformer Askarel in Equipment
  • IEEE 792-1995 – IEEE Recommended Practice for the Evaluation of the Impulse Voltage Capability of Insulation Systems for AC Electric Machinery Employing Form-Wound Stator Coils
  • IEEE 803-1983 – IEEE Recommended Practice for Unique Identification in Power Plants and Related Facilities – Principles and Definitions
  • IEEE 804-1983 – IEEE Recommended Practice for Implementation of Unique Identification System in Power Plants and Related Facilities
  • IEEE 805-1984 – IEEE Recommended Practice for System Identification in Nuclear Power Plants and Related Facilities
  • IEEE 816-1987 – IEEE Guide for Determining the Smoke Generation of Solid Materials Ued for Insulations and Coverings of Electric Wire and Cable
  • IEEE 83-1963 – Test Procedure for Radial Power Factor Tests on Insulating Tapes in Paper-Insulated Power Cable
  • IEEE 928-1986 – IEEE Recommended Criteria for Terrestrial Photovoltaic Power Systems
  • IEEE 929-1988 – IEEE Recommended Practice for Utility Interface of Residential and Intermediate Photovoltaic (PV) Systems
  • IEEE 937-1987 – IEEE Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) Systems
  • IEEE 944-1986 – IEEE Recommended Practice for the Application and Testing of Uninterruptible Power Supplies for Power Generating Stations
  • IEEE 957-1987 – IEEE Guide for Cleaning Insulators
  • IEEE 99-2019 – IEEE Recommended Practice for the Preparation of Test Procedures for the Thermal Evaluation of Insulation Systems for Electrical Equipment
  • IEEE C37.011-1994 – IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.081-1981 – IEEE Guide for Synthetic Fault Testing of AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.103-1990 – IEEE Guide for Differential and Polarizing Relay Circuit Testing
  • IEEE C37.109-1988 – IEEE Guide for the Protection of Shunt Reactors
  • IEEE C37.36b-1990 – IEEE Guide to Current Interruption with Horn-Gap Air Switches
  • IEEE C37.48-2005 – IEEE Guide for the Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
  • IEEE C37.99-1990 – IEEE Guide for the Protection of Shunt Capacitor Banks
  • IEEE C57.113-1991 – IEEE Guide for Partial Discharge Measurement in Liquid-Filled Power Transformers and Shunt Reactors
  • IEEE C57.117-1986 – IEEE Guide for Reporting Failure Data for Power Transformers and Shunt Reactors on Electric Utility Power Systems
  • IEEE C57.13.1-1981 – IEEE Guide for Field Testing of Relaying Current Transformers
  • IEEE C57.140-2017 – IEEE Guide for Evaluation and Reconditioning of Liquid Immersed Power Transformers
  • IEEE C57.19.101-1989 – IEEE Guide for Loading Power Apparatus Bushings
  • IEEE C57.96-2013 – IEEE Guide for Loading Dry-Type Distribution and Power Transformers
  • IEEE C62.23-1995 – IEEE Application Guide for Surge Protection of Electric Generating Plants
  • IEEE C62.42.1-2016 – IEEE Guide for the Application of Surge-Protective Components in Surge Protective Devices and Equipment Ports–Part 1: Gas Discharge Tubes (GDTs)
  • IEEE C62.47-1992 – IEEE Guide on Electrostatic Discharge (ESD): Characterization of the ESD Environment
  • IEEE/AIEE 47-1945 – AIEE Expulsion Type Distribution Lightning Arresters
  • IEEE/ANSI 18-1968 – IEEE Shunt Power Capacitors
  • IEEE/IEC 62539-2007 – IEC 62539 Ed.1 (IEEE Std 930 (TM)-2004): Guide for the Statistical Analysis of Electrical Insulation Breakdown Data
  • IEEE 1361-2003 – IEEE Guide for Selection, Charging, Test and Evaluation of Lead-Acid Batteries Used in Stand-Alone Photovoltaic (PV) Systems
  • IEEE 1526-2003 – IEEE Recommended Practice for Testing the Performance of Stand-Alone Photovoltaic Systems
  • IEEE 1526-2003 – IEEE Recommended Practice for Testing the Performance of Stand-Alone Photovoltaic Systems
  • IEEE 1561-2007 – IEEE Guide for Optimizing the Performance and Life of Lead-Acid Batteries in Remote Hybrid Power Systems
  • IEEE 1562-2007 – IEEE Guide for Array and Battery Sizing in Stand-Alone Photovoltaic (PV) Systems
  • IEEE 1661-2007 – IEEE Guide for Test and Evaluation of Lead-Acid Batteries Used in Photovoltaic (PV) Hybrid Power Systems
  • IEEE C37.20.7-2001 – IEEE Guide for Testing Medium-Voltage Metal-Enclosed Switchgear for Internal Arcing Faults
  • IEEE C62.45-1987 – IEEE Guide on Surge Testing for Equipment Connected to Low-Voltage AC Power Circuits
  • IEEE C62.45-1992 – IEEE Guide on Surge Testing for Equipment Connected to Low-Voltage AC Power Circuits
  • IEEE C62.45-2002 – IEEE Recommended Practice on Surge Testing for Equipment Connected to Low-Voltage (1000 V and less) AC Power Circuits
  • IEEE C62.48-1995 – IEEE Guide on Interactions Between Power System Disturbances and Surge-Protective Devices
  • IEEE C62.48-2005 – IEEE Guide on Interactions Between Power System Disturbances and Surge Protective Devices
  • IEEE 1584-2002 – IEEE Guide for Performing Arc Flash Hazard Calculations
  • IEEE 1862-2014 – IEEE Recommended Practice for Overvoltage and Insulation Coordination of Transmission Systems at 1000 kV AC and Above
  • IEEE C37.121-2020 – IEEE Guide for Switchgear—Unit Substation–Requirements
  • IEEE 1062a-1998 – Recommended Practice for Software Acquisition

Disclaimer : jika ada perbedaan antara daftar nama di artikel ini dengan artikel asli dari ieee.org, maka pembaca harus mengikuti artikel asli dari ieee.org tersebut.

Demikian artikel dari standarku.com mengenai Daftar Standar IEEE part 16 Power and Energy sub part 4.

Mohon saran dari pembaca untuk kelengkapan isi artikel ini, silahkan saran tersebut dapat disampaikan melalui kolom komentar.

Baca artikel lain :

Sumber referensi :

Related Posts:

  • Daftar Standar ISO 30000-39999 Daftar Standar ISO 30000-39999 adalah kumpulan judul dari Standar nomor ISO 30000 hingga ISO 39999 yang diterbitkan oleh badan ISO Internasional. Mengenai Standar ISO ISO (International Organization for Standardization) adalah…
  • ISO IEC IEEE 15026-1 software assurance concepts ISO IEC IEEE 15026-1 adalah Standar Internasional mengenai systems and software engineering atau sistem dan rekayasa perangkat lunak, khususnya tentang systems and software assurance part 1: concepts and vocabulary atau…
  • Daftar Standar IEEE part 12-14 Daftar Standar IEEE part 12-14 adalah kumpulan judul standar IEEE dengan lingkup : Instrumentation and Measurement, Nanotechnology, National Electrical Safety Code (NESC). Standar IEEE merupakan suatu standar yang diterbitkan oleh…
  • Daftar Standar ISO 21000-21999 Daftar Standar ISO 21000-21999 adalah kumpulan judul dari Standar nomor ISO 21000 hingga ISO 21999 yang diterbitkan oleh badan ISO Internasional. Mengenai Standar ISO ISO (International Organization for Standardization) adalah…
  • ISO IEC 11801-1:2017 Klausa 3.1.7 - 3.1.87 ISO IEC 11801-1:2017 Klausa 3.1.7 - 3.1.87 adalah Standar Internasional mengenai Teknologi Informasi, khususnya tentang persyaratan umum pada Generic cabling for customer premises. Artikel ini merupakan lanjutan dari artikel sebelumnya…
  • Daftar Standar Gratis SDO IBR Daftar Standar Gratis SDO IBR adalah kumpulan judul standar dari organisasi pengembangan standar untuk dibaca secara gratis, hasil kerjasama dengan ANSI IBR. Definisi SDO IBR Artikel ini merupakan lanjutan dari…
  • ISO 50002 Standar Audit Energi ISO 50002 adalah Standar Internasional mengenai persyaratan dengan panduan penggunaan dari Audit energi atau Energy audits. Standar versi terbaru yang masih berlaku adalah terbitan tahun 2014 dengan judul berikut :…
  • Daftar Standar ISO 8600-8999 Daftar Standar ISO 8600-8999 adalah kumpulan judul dari Standar nomor ISO 8600 hingga ISO 8999 yang diterbitkan oleh badan ISO Internasional. Mengenai Standar ISO ISO (International Organization for Standardization) adalah…
  • Daftar Standar IEEE Power and Energy 3 Daftar Standar IEEE Power and Energy 3 adalah kumpulan judul standar IEEE dengan lingkup : Power and Energy sub part 3. Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi…
  • Standar ISO 90003 Software engineering Pengertian Standar ISO 90003 ISO 90003 adalah standar internasional mengenai panduan suatu organisasi untuk menerapkan ISO 9001 pada rekayasa perangkat lunak (software) di komputer. Rekayasa tersebut meliputi kegiatan : penerimaan,…
  • ISO IEC IEEE 15026-1 Klausa 3.1 - 3.5 ISO IEC IEEE 15026-1 Klausa 3.1 - 3.5 adalah Standar Internasional mengenai systems and software engineering atau sistem dan rekayasa perangkat lunak, khususnya tentang systems and software assurance part 1:…
  • Hari Standar Sedunia Hari Standar Sedunia atau World Standards Day adalah peringatan untuk menghormati upaya ribuan ahli yang mengembangkan standar sukarela dalam organisasi pengembangan standar. Disebut juga dengan Hari Standar Internasional atau International…
  • Standar ISO/IEC 29110 Standar ISO/IEC 29110 adalah standar dari badan ISO dan IEC mengenai Systems and Software Life Cycle Profiles and Guidelines for Very Small Entities (VSE). Standar ISO/IEC 29110 Judul standar ini…
  • Organisasi Standar ASTM ASTM atau American Standard Testing and Material adalah sebuah organisasi dunia yang mengembangkan standardisasi teknik untuk material, produk, sistem dan jasa. Organisasi standardisasi internasional yang bersifat sukarela ini berpusat di…
  • AIEE, Organisasi Electrical Engineers Amerika American Institute of Electrical Engineers (AIEE) adalah organisasi insinyur listrik yang berbasis di Amerika Serikat dari tahun 1884 hingga 1962, sekarang menjadi IEEE. Pada 1 Januari 1963, organisasi ini  bergabung…

Leave a Comment