Daftar Standar ISO 11500-11999 adalah kumpulan judul dari Standar nomor ISO 15000 hingga ISO 11999 yang diterbitkan oleh badan ISO Internasional.
Mengenai Standar ISO
ISO (International Organization for Standardization) adalah suatu organisasi atau lembaga nirlaba internasional.
Organisasi ini bertujuan untuk membuat dan memperkenalkan standar dan standardisasi internasional untuk berbagai tujuan.
ISO telah mengembangkan lebih dari 23,755 Standar Internasional dan semuanya tercantum di dalam katalog Standar ISO.
Isi dari standar ISO ini dilindungi oleh hak cipta dan sebagian besar harus melakukan proses pembelian untuk dapat mengakses keseluruhan isinya.
Namun ada sekitar 300 standar yang diproduksi oleh ISO dan IEC Joint Technical Committee (JTC1) telah dinyatakan bersifat bebas dan tersedia untuk umum.
Lebih jelas mengenai Standar ISO dan Badan ISO dapat dibaca pada artikel lain dari standarku.com berikut :
Standar Kerjasama
Didalam daftar standar ISO juga terdapat standar lain hasil kerjasama badan standardisasi lain dengan standar ISO seperti :
- IEC (International Electrotechnical Commission)
- IWA (International Workshop Agreement)
IEC adalah organisasi standardisasi internasional yang menyusun dan menerbitkan standar-standar internasional untuk seluruh bidang :
- elektrik, elektronik dan teknologi yang terkait atau bidang teknologi elektro (electrotechnology).
Lebih jelas mengenai IEC dapat dibaca pada artikel lain dari standarku.com berikut :
IWA adalah dokumen ISO yang dihasilkan bukan melalui proses komite teknis ISO secara penuh, namun melalui workshop meeting.
Pelaku pasar dan pemangku kepentingan lainnya dapat berpartisipasi langsung dalam mengembangkan IWA dan tidak harus melalui delegasi nasional.
Ini adalah cara cepat untuk mendapatkan dokumen ISO yang diakui, prosesnya tidak boleh memakan waktu total lebih dari 12 bulan.
Prosesnya dirancang agar fleksibel dan sebagian besar diputuskan oleh organisasi yang mengajukan.
Daftar Standar ISO 11500-11999
Keseluruhan Daftar Standar ISO adalah dari ISO 1 hingga ISO 99999, namun terlalu panjang untuk ditampilkan semua pada halaman ini.
Untuk itu kami telah membaginya menjadi beberapa postingan, yang dimulai pada postingan sebelumnya berikut :
- Daftar Standar ISO (ISO 1-99)
- Daftar Standar ISO 100-199
- Daftar Standar ISO 200-499
- Daftar Standar ISO 500-699
- Daftar Standar ISO 700-999
- Daftar Standar ISO 1000-2999
- Daftar Standar ISO 3000-4999
- Daftar Standar ISO 11000-11499
Selanjutnya pada postingan kali ini akan menampilkan Standar ISO seri ISO 11500 hingga ISO 11999.
Daftar Standar ISO 11500 – ISO 11599
ISO/IEC 11518 Information technology – High-Performance Parallel Interface
ISO/IEC 11518-1:1995 Part 1: Mechanical, electrical and signalling protocol specification (HIPPI-PH)
ISO/IEC 11518-2:2000 Part 2: Framing Protocol (HIPPI-FP)
ISO/IEC 11518-3:1996 Part 3: Encapsulation of ISO/IEC 8802-2 (IEEE Std 802.2) Logical Link Control Protocol Data Units (HIPPI-LE)
ISO/IEC 11518-6:2000 Part 6: Physical Switch Control (HIPPI-SC)
ISO/IEC 11518-9:1999 Part 9: Serial specification (HIPPI-Serial)
ISO/IEC 11518-10:2001 Part 10: 6400 Mbit/s Physical Layer (HIPPI-6400-PH)
ISO 11532:2012 Aircraft ground equipment – Graphical symbols
ISO/IEC 11544:1993 Information technology – Coded representation of picture and audio information – Progressive bi-level image compression
ISO 11546 Acoustics – Determination of sound insulation performances of enclosures
ISO 11546-1:1995 Part 1: Measurements under laboratory conditions (for declaration purposes)
ISO 11546-2:1995 Part 2: Measurements in situ (for acceptance and verification purposes)
ISO/TR 11548 Communication aids for blind persons – Identifiers, names and assignation to coded character sets for 8-dot Braille characters
ISO/TR 11548-1:2001 Part 1: General guidelines for Braille identifiers and shift marks
ISO/TR 11548-2:2001 Part 2: Latin alphabet based character sets
ISO 11551:2003 Optics and optical instruments – Lasers and laser-related equipment – Test method for absorptance of optical laser components
ISO 11553 Safety of machinery – Laser processing machines
ISO 11553-1:2005 Part 1: General safety requirements
ISO 11553-2:2007 Part 2: Safety requirements for hand-held laser processing devices
ISO 11553-3:2013 Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2)
ISO 11554:2017 Optics and photonics – Lasers and laser-related equipment – Test methods for laser beam power, energy and temporal characteristics
ISO/IEC 11557:1992 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS-DC format using 60 m and 90 m length tapes
ISO/IEC 11558:1992 Information technology – Data compression for information interchange – Adaptive coding with embedded dictionary – DCLZ Algorithm
ISO/IEC 11559:1993 Information technology – Data interchange on 12,7 mm wide 18-track magnetic tape cartridges – Extended format
ISO/IEC 11560:1992 Information technology – Information interchange on 130 mm optical disk cartridges using the magneto-optical effect, for write once, read multiple functionality
ISO 11568 Financial services – Key management (retail)[Note 3]
ISO 11568-1:2005 Part 1: Principles
ISO 11568-2:2012 Part 2: Symmetric ciphers, their key management and life cycle
ISO 11568-4:2007 Part 4: Asymmetric cryptosystems – Key management and life cycle
ISO/IEC 11569:1993 Information technology – Telecommunications and information exchange between systems – 26-pole interface connector mateability dimensions and contact number assignments
ISO/IEC 11570:1992 Information technology – Telecommunications and information exchange between systems – Open Systems Interconnection – Transport protocol identification mechanism
ISO/IEC 11571:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Networks – Addressing
ISO/IEC 11572:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Circuit mode bearer services – Inter-exchange signalling procedures and protocol
ISO/IEC 11573:1994 Information technology – Telecommunications and information exchange between systems – Synchronization methods and technical requirements for Private Integrated Services Networks
ISO/IEC 11574:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Circuit-mode 64 kbit/s bearer services – Service description, functional capabilities and information flows
ISO/IEC 11575:1995 Information technology – Telecommunications and information exchange between systems – Protocol mappings for the OSI Data Link service
ISO/IEC 11576:1994 Information technology – Procedure for the registration of algorithms for the lossless compression of data
ISO/IEC 11577:1995 Information technology – Open Systems Interconnection – Network layer security protocol
ISO/IEC 11578:1996 Information technology – Open Systems Interconnection – Remote procedure call (RPC)
ISO/IEC 11579 Information technology – Telecommunications and information exchange between systems – Private integrated services network
ISO/IEC 11579-1:1994 Part 1: Reference configuration for PISN Exchanges (PINX)
ISO/IEC 11579-2:1999 Part 2: Reference configuration for HS-PISN Exchanges (HS-PINX)
ISO/IEC 11579-3:1999 Part 3: Reference configuration for PINX extension lines
ISO/IEC TR 11580:2007 Information technology – Framework for describing user interface objects, actions and attributes
ISO/IEC 11581 Information technology – User interface icons[Note 3]
ISO/IEC 11581-1:2000 Part 1: Icons – General
ISO/IEC TR 11581-1:2011 Part 1: Introduction to and overview of icon standards
ISO/IEC 11581-2:2000 Part 2: Object icons
ISO/IEC 11581-3:2000 Part 3: Pointer icons
ISO/IEC 11581-5:2004 Part 5: Tool icons
ISO/IEC 11581-6:1999 Part 6: Action icons
ISO/IEC 11581-10:2010 Part 10: Framework and general guidance
ISO/IEC 11581-40:2011 Part 40: Management of icon registration
ISO/IEC TS 11581-41:2014 Part 41: Data structure to be used by the ISO/IEC JTC 1/SC 35 icon database
ISO/IEC 11582:2002 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Generic functional protocol for the support of supplementary services – Inter-exchange signalling procedures and protocol
ISO/TR 11583:2012 Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits
ISO/IEC 11584:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Circuit-mode multi-rate bearer services – Service description, functional capabilities and information flows
ISO/IEC 11586 Information technology – Open Systems Interconnection – Generic upper layers security
ISO/IEC 11586-1:1996 Overview, models and notation
ISO/IEC 11586-2:1996 Security Exchange Service Element (SESE) service definition
ISO/IEC 11586-3:1996 Security Exchange Service Element (SESE) protocol specification
ISO/IEC 11586-4:1996 Protecting transfer syntax specification
ISO/IEC 11586-5:1997 Security Exchange Service Element (SESE) Protocol Implementation Conformance Statement (PICS) proforma
ISO/IEC 11586-6:1997 Protecting transfer syntax Protocol Implementation Conformance Statement (PICS) proforma
ISO/IEC 11587:1996 Information technology – Open Systems Interconnection – Application Context for Systems Management with Transaction Processing
ISO 11593:1996 Manipulating industrial robots – Automatic end effector exchange systems – Vocabulary and presentation of characteristics
Daftar Standar ISO 11600 – ISO 11699
ISO 11607:2006 Packaging for Terminally Sterilized Medical Devices
ISO 11608 Needle-based injection systems for medical use – Requirements and test methods[Note 3]
ISO 11608-1:2014 Part 1: Needle-based injection systems
ISO 11608-2:2012 Part 2: Needles
ISO 11608-3:2012 Part 3: Finished containers
ISO 11608-4:2006 Part 4: Requirements and test methods for electronic and electromechanical pen-injectors
ISO 11608-5:2012 Part 5: Automated functions
ISO 11608-7:2016 Part 7: Accessibility for persons with visual impairment
ISO 11609:2017 Dentistry – Dentifrices – Requirements, test methods and marking
ISO/TR 11610:2004 Protective clothing – Vocabulary
ISO 11612 Protective clothing – Protection against brief contact with heat and flame. The heat can be convective, radiant, molten material, or a combination thereof.
ISO 11615:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated medicinal product information
ISO 11616:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated pharmaceutical product information
ISO 11620:2014 Information and documentation – Library performance indicators
ISO 11631:1998 Measurement of fluid flow – Methods of specifying flowmeter performance
ISO/TR 11633 Health informatics – Information security management for remote maintenance of medical devices and medical information systems
ISO/TR 11633-1:2009 Part 1: Requirements and risk analysis
ISO/TR 11633-2:2009 Part 2: Implementation of an information security management system (ISMS)
ISO/TR 11636:2009 Health Informatics – Dynamic on-demand virtual private network for health information infrastructure
ISO 11648 Statistical aspects of sampling from bulk materials
ISO 11648-1:2003 Part 1: General principles
ISO 11648-2:2001 Part 2: Sampling of particulate materials
ISO 11649:2009 Financial services – Core banking – Structured creditor reference to remittance information
ISO/TR 11651:2015 Estimation of sediment deposition in reservoirs using one dimensional simulation models
ISO 11655:1995 Measurement of liquid flow in open channels – Method of specifying performance of hydrometric equipment
ISO 11657:2014 Hydrometry – Suspended sediment in streams and canals – Determination of concentration by surrogate techniques
ISO 11658:2012 Cardiovascular implants and extracorporeal systems – Blood/tissue contact surface modifications for extracorporeal perfusion systems
ISO 11663:2014 Quality of dialysis fluid for haemodialysis and related therapies
ISO 11664 Colorimetry
ISO 11664-1:2007 Part 1: CIE standard colorimetric observers
ISO 11664-2:2007 Part 2: CIE standard illuminants
ISO 11664-3:2012 Part 3: CIE tristimulus values
ISO 11664-4:2008 Part 4: CIE 1976 L*a*b* Colour space
ISO/CIE 11664-5:2016 Part 5: CIE 1976 L*u*v* colour space and u’, v’ uniform chromaticity scale diagram
ISO/CIE 11664-6:2014 Part 6: CIEDE2000 Colour-difference formula
ISO 11665 Measurement of radioactivity in the environment – Air: radon-222
ISO 11665-1:2012 Part 1: Origins of radon and its short-lived decay products and associated measurement methods
ISO 11665-2:2012 Part 2: Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products
ISO 11665-3:2012 Part 3: Spot measurement method of the potential alpha energy concentration of its short-lived decay products
ISO 11665-4:2012 Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
ISO 11665-5:2012 Part 5: Continuous measurement method of the activity concentration
ISO 11665-6:2012 Part 6: Spot measurement method of the activity concentration
ISO 11665-7:2012 Part 7: Accumulation method for estimating surface exhalation rate
ISO 11665-8:2012 Part 8: Methodologies for initial and additional investigations in buildings
ISO 11665-9:2016 Part 9: Test methods for exhalation rate of building materials
ISO 11665-11:2016 Part 11: Test method for soil gas with sampling at depth
ISO/TS 11669:2012 Translation projects – General guidance
ISO 11670:2003 Lasers and laser-related equipment – Test methods for laser beam parameters – Beam positional stability
ISO/TS 11672:2016 Connectors for fluid power and general use – Designation and nomenclature
ISO 11675:2005 Textile machinery and accessories – Flatbed knitting machines – Vocabulary
ISO 11676:2014 Textile machinery and accessories – Pattern disks and pattern chains for warp knitting machines – Vocabulary and symbols
ISO 11683:1997 Packaging – Tactile warnings of danger – Requirements
ISO 11684:1995 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment – Safety signs and hazard pictorials – General principles
ISO/TR 11688 Acoustics – Recommended practice for the design of low-noise machinery and equipment
ISO/TR 11688-1:1995 Part 1: Planning
ISO/TR 11688-2:1998 Part 2: Introduction to the physics of low-noise design
ISO 11689:1996 Acoustics – Procedure for the comparison of noise-emission data for machinery and equipment
ISO/IEC 11693 Identification cards – Optical memory cards
ISO/IEC 11693-1:2012 Part 1: General characteristics
ISO/IEC 11693-2:2009 Part 2: Co-existence of optical memory with other machine readable technologies
ISO/IEC 11693-3:2015 Part 3: Authentication techniques
ISO/IEC 11694 Identification cards – Optical memory cards – Linear recording method
ISO/IEC 11694-1:2012 Part 1: Physical characteristics
ISO/IEC 11694-2:2012 Part 2: Dimensions and location of the accessible optical area
ISO/IEC 11694-3:2015 Part 3: Optical properties and characteristics
ISO/IEC 11694-4:2008 Part 4: Logical data structures
ISO/IEC 11694-5:2014 Part 5: Data format for information interchange for applications using ISO/IEC 11694-4
ISO/IEC 11694-6:2014 Part 6: Use of biometrics on an optical memory card
ISO/IEC 11695 Identification cards – Optical memory cards – Holographic recording method
ISO/IEC 11695-1:2015 Part 1: Physical characteristics
ISO/IEC 11695-2:2015 Part 2: Dimensions and location of accessible optical area
ISO/IEC 11695-3:2017 Part 3: Optical properties and characteristics
Daftar Standar ISO 11700 – ISO 11799
ISO 11704:2010 Water quality – Measurement of gross alpha and beta activity concentration in non-saline water – Liquid scintillation counting method
ISO 11712:2009 Anaesthetic and respiratory equipment – Supralaryngeal airways and connectors
ISO 11731:2017 Water quality – Enumeration of Legionella
ISO 11737 Sterilization of medical devices – Microbiological methods
ISO 11737-1:2006 Part 1: Determination of a population of microorganisms on products
ISO 11737-2:2009 Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process
ISO/IEC 11756:1999 Information technology – Programming languages – M
ISO/TR 11766:2010 Intelligent transport systems – Communications access for land mobiles (CALM) – Security considerations for lawful interception
ISO/TR 11769:2010 Intelligent transport systems – Communications access for land mobiles (CALM) – Data retention for law enforcement
ISO/IEC 11770 Information technology – Security techniques – Key management
ISO/IEC 11770-1:2010 Part 1: Framework
ISO/IEC 11770-2:2008 Part 2: Mechanisms using symmetric techniques
ISO/IEC 11770-3:2015 Part 3: Mechanisms using asymmetric techniques
ISO/IEC 11770-4:2006 Part 4: Mechanisms based on weak secrets
ISO/IEC 11770-5:2011 Part 5: Group key management
ISO/IEC 11770-6:2016 Part 6: Key derivation
ISO/TS 11774:2011 Non-destructive testing – Performance-based qualification
ISO 11783 Tractors and machinery for agriculture and forestry – Serial control and communications data network
ISO 11798:1999 Information and documentation – Permanence and durability of writing, printing and copying on paper – Requirements and test methods
ISO 11799:2015 Information and documentation – Document storage requirements for archive and library materials
Daftar Standar ISO 11800 – ISO 11899
ISO 11800:1998 Information and documentation – Requirements for binding materials and methods used in the manufacture of books
ISO/IEC 11801:2002 Information technology – Generic cabling for customer premises[Note 3]
ISO/IEC TR 11801-9901:2014 Part 9901: Guidance for balanced cabling in support of at least 40 Gbit/s data transmission
ISO/IEC TR 11801-9902:2017 Part 9902: Specifications for End-to-end link configurations
ISO/IEC TR 11801-9903:2015 Part 9903: Matrix modelling of channels and links
ISO/IEC TR 11801-9904:2017 Part 9904: Guidelines for the use of installed cabling to support 2,5GBASE -T and 5GBASE -T applications
ISO/IEC TR 11802 Information technology – Telecommunications and information exchange between systems – Local and metropolitan area networks – Technical reports and guidelines
ISO/IEC TR 11802-5:1997 Part 5: Media Access Control (MAC) Bridging of Ethernet V2.0 in Local Area Networks
ISO 11807 Integrated optics – Vocabulary
ISO 11807-1:2001 Part 1: Basic terms and symbols
ISO 11807-2:2001 Part 2: Terms used in classification
ISO 11810:2015 Lasers and laser-related equipment – Test method and classification for the laser resistance of surgical drapes and/or patient protective covers – Primary ignition, penetration, flame spread and secondary ignition
ISO/TR 11811:2012 Nanotechnologies – Guidance on methods for nano- and microtribology measurements
ISO 11819 Acoustics – Measurement of the influence of road surfaces on traffic noise[Note 3]
ISO 11819-1:1997 Part 1: Statistical Pass-By method
ISO 11819-2:2017 Part 2: The close-proximity method
ISO/TS 11819-3:2017 Part 3: Reference tyres
ISO/PAS 11819-4:2013 Part 4: SPB method using backing board
ISO 11821:1997 Acoustics – Measurement of the in situ sound attenuation of a removable screen
ISO 11822:1996 Information and documentation – Extension of the Arabic alphabet coded character set for bibliographic information interchange
ISO 11838:1997 Motorcycle and motorcycle-rider kinematics – Vocabulary
ISO 11841 Road vehicles and internal combustion engines – Filter vocabulary
ISO 11841-1:2000 Part 1: Definitions of filters and filter components
ISO 11841-2:2000 Part 2: Definitions of characteristics of filters and their components
ISO 11843 Capability of detection
ISO 11843-1:1997 Part 1: Terms and definitions
ISO 11843-2:2000 Part 2: Methodology in the linear calibration case
ISO 11843-3:2003 Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used
ISO 11843-4:2003 Part 4: Methodology for comparing the minimum detectable value with a given value
ISO 11843-5:2008 Part 5: Methodology in the linear and non-linear calibration cases
ISO 11843-6:2013 Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
ISO 11843-7:2012 Part 7: Methodology based on stochastic properties of instrumental noise
ISO 11866 Milk and milk products – Enumeration of presumptive Escherichia coli
ISO 11866-1:2005 Part 1: Most probable number technique using 4-methylumbelliferyl-beta-D-glucuronide (MUG)
ISO 11866-2:2005 Part 2: Colony-count technique at 44 degrees C using membranes
ISO 11886:2002 Building construction machinery and equipment – Pile driving and extracting equipment – Terminology and commercial specifications
ISO/TS 11888:2017 Nanotechnologies – Characterization of multiwall carbon nanotubes – Mesoscopic shape factors
ISO/IEC 11889 Information technology – Trusted platform module library
ISO/IEC 11889-1:2015 Part 1: Architecture
ISO/IEC 11889-2:2015 Part 2: Structures
ISO/IEC 11889-3:2015 Part 3: Commands
ISO/IEC 11889-4:2015 Part 4: Supporting Routines
ISO 11898 Road vehicles – Controller area network (CAN)
Daftar Standar ISO 11900 – ISO 11999
ISO 11904 Acoustics – Determination of sound immission from sound sources placed close to the ear
ISO 11904-1:2002 Part 1: Technique using a microphone in a real ear (MIRE technique)
ISO 11904-2:2004 Part 2: Technique using a manikin
ISO 11929:2010 Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation – Fundamentals and application
ISO 11930:2012 Cosmetics – Microbiology – Evaluation of the antimicrobial protection of a cosmetic product
ISO/TS 11931:2012 Nanotechnologies – Nanoscale calcium carbonate in powder form – Characteristics and measurement
ISO/TS 11937:2012 Nanotechnologies – Nanoscale titanium dioxide in powder form – Characteristics and measurement
ISO 11940:1998 Information and documentation – Transliteration of Thai
ISO 11940-2:2007 Information and documentation – Transliteration of Thai characters into Latin characters – Part 2: Simplified transcription of Thai language
ISO/TR 11941:1996 Information and documentation – Transliteration of Korean script into Latin characters [Withdrawn, no replacement]
ISO 11957:1996 Acoustics – Determination of sound insulation performance of cabins – Laboratory and in situ measurements
ISO/IEC 11976:2008 Information technology – Data interchange on 130 mm rewritable and write-once-read-many ultra density optical (UDO) disk cartridges – Capacity: 60 Gbytes per cartridge – Second generation
ISO 11978:2017 Ophthalmic optics – Contact lenses and contact lens care products – Labelling
ISO 11979 Ophthalmic implants – Intraocular lenses
ISO 11979-1:2012 Part 1: Vocabulary
ISO 11979-2:2014 Part 2: Optical properties and test methods
ISO 11979-3:2012 Part 3: Mechanical properties and test methods
ISO 11979-4:2008 Part 4: Labelling and information
ISO 11979-5:2006 Part 5: Biocompatibility
ISO 11979-6:2014 Part 6: Shelf-life and transport stability testing
ISO 11979-7:2014 Part 7: Clinical investigations
ISO 11979-8:2017 Part 8: Fundamental requirements
ISO 11979-9:2006 Part 9: Multifocal intraocular lenses
ISO 11979-10:2006 Part 10: Phakic intraocular lenses
ISO 11980:2012 Ophthalmic optics – Contact lenses and contact lens care products – Guidance for clinical investigations
ISO 11981:2009 Ophthalmic optics – Contact lenses and contact lens care products – Determination of physical compatibility of contact lens care products with contact lenses
ISO 11986:2010 Ophthalmic optics – Contact lenses and contact lens care products – Determination of preservative uptake and release
ISO 11987:2012 Ophthalmic optics – Contact lenses – Determination of shelf-life
ISO/IEC 11989:2010 Information technology – iSCSI Management API
ISO 11990 Lasers and laser-related equipment – Determination of laser resistance of tracheal tubes
ISO 11990-1:2011 Part 1: Tracheal tube shaft
ISO 11990-2:2010 Part 2: Tracheal tube cuffs
ISO/TR 11991:1995 Guidance on airway management during laser surgery of upper airway
ISO 11994:1997 Cranes – Availability – Vocabulary
Update Daftar
Untuk daftar lengkap dan terbaru dari semua standar ISO setiap saat, bisa dilihat pada katalog ISO di web resmi ISO international berikut :
https://www.iso.org/standards-catalogue/browse-by-ics.html
Demikian artikel dari standarku.com mengenai Daftar Standar ISO 11500-11999.
Mohon saran dari pembaca untuk kelengkapan isi artikel ini, silahkan saran tersebut dapat disampaikan melalui kolom komentar.
Baca artikel lain :
- Daftar Standar ISO (ISO 1-99)
- Daftar Standar ISO 100-199
- Daftar Standar ISO 200-499
- Daftar Standar ISO 500-699
- Daftar Standar ISO 700-999
- Daftar Standar ISO 1000-2999
- Daftar Standar ISO 3000-4999
- Daftar Standar ISO 11000-11499
- Daftar Standar ANSI IBR
- Daftar Standar IEC
Sumber referensi :