Daftar Standar ISO 7000-7999

Daftar Standar ISO 7000-7999 adalah kumpulan judul dari Standar nomor ISO 7000 hingga ISO 7999 yang diterbitkan oleh badan ISO Internasional.

Mengenai Standar ISO

ISO (International Organization for Standardization) adalah suatu organisasi atau lembaga nirlaba internasional.

Organisasi ini bertujuan untuk membuat dan memperkenalkan standar dan standardisasi internasional untuk berbagai tujuan.

ISO telah mengembangkan lebih dari 23,755 Standar Internasional dan semuanya tercantum di dalam katalog Standar ISO.

Isi dari standar ISO ini dilindungi oleh hak cipta dan sebagian besar harus melakukan proses pembelian untuk dapat mengakses keseluruhan isinya.

Namun ada sekitar 300 standar yang diproduksi oleh ISO dan IEC Joint Technical Committee (JTC1) telah dinyatakan bersifat bebas dan tersedia untuk umum.

Lebih jelas mengenai Standar ISO dan Badan ISO dapat dibaca pada artikel lain dari standarku.com berikut :

Standar Kerjasama

Didalam daftar standar ISO juga terdapat standar lain hasil kerjasama badan standardisasi lain dengan standar ISO seperti :

  • IEC (International Electrotechnical Commission)
  • IWA (International Workshop Agreement)

IEC adalah organisasi standardisasi internasional yang menyusun dan menerbitkan standar-standar internasional untuk seluruh bidang elektrik, elektronik dan teknologi yang terkait atau bidang teknologi elektro (electrotechnology).

Lebih jelas mengenai IEC dapat dibaca pada artikel lain dari standarku.com berikut :

IWA adalah dokumen ISO yang dihasilkan bukan melalui proses komite teknis ISO secara penuh, namun melalui workshop meeting.

Pelaku pasar dan pemangku kepentingan lainnya dapat berpartisipasi langsung dalam mengembangkan IWA dan tidak harus melalui delegasi nasional.

Ini adalah cara cepat untuk mendapatkan dokumen ISO yang diakui, prosesnya tidak boleh memakan waktu total lebih dari 12 bulan.

Prosesnya dirancang agar fleksibel dan sebagian besar diputuskan oleh organisasi yang mengajukan.

Daftar Standar ISO 7000-7999

Keseluruhan Daftar Standar ISO adalah dari ISO 1 hingga ISO 99999, namun terlalu panjang untuk ditampilkan semua pada halaman ini.

Untuk itu kami telah membaginya menjadi beberapa postingan, yang dimulai pada postingan sebelumnya berikut :

Selanjutnya pada postingan kali ini akan menampilkan Standar ISO seri ISO 7000 hingga ISO 7999.

Daftar Standar ISO 7000-7999

ISO 7000:2014 Graphical symbols for use on equipment – Registered symbols

ISO 7001:2007 Graphical symbols – Public information symbols

ISO 7002 Agricultural food products – Layout for a standard method of sampling from a lot

ISO 7010:2011 Graphical symbols – Safety colours and safety signs – Registered safety signs

ISO 7029:2017 Acoustics – Statistical distribution of hearing thresholds related to age and gender

ISO 7056:1981 Plastics laboratory ware – Beakers

ISO/IEC 7064:2003 Information technology – Security techniques – Check character systems

ISO 7065 Information processing – Data interchange on 200 mm (8 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on both sides

ISO 7065-1:1985 Part 1: Dimensional, physical and magnetic characteristics

ISO 7065-2:1985 Part 2: Track format

ISO 7066 Assessment of uncertainty in the calibration and use of flow measurement devices

ISO 7066-2:1988 Part 2: Non-linear calibration relationships

ISO 7078:1985 Building construction – Procedures for setting out, measurement and surveying – Vocabulary and guidance notes

ISO 7083:1983 Technical drawings – Symbols for geometrical tolerancing – Proportions and dimensions

ISO 7087:1984 Ferroalloys – Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling

ISO 7088:1981 Fish-meal – Vocabulary

ISO 7089:2000 Plain washers — Normal series — Product grade A

ISO 7090:2000 Plain washers, chamfered — Normal series — Product grade A

ISO 7091:2000 Plain washers — Normal series — Product grade C

ISO 7092:2000 Plain washers — Small series — Product grade A

ISO 7093:2000 Plain washers — Large series

ISO 7098:2015 Information and documentation – Romanization of Chinese

ISO 7112:2017 Machinery for forestry – Portable brush-cutters and grass-trimmers – Vocabulary

ISO 7130:2013 Earth-moving machinery – Operator training – Content and methods

ISO 7131:2009 Earth-moving machinery – Loaders – Terminology and commercial specifications

ISO 7132:2003 Earth-moving machinery – Dumpers – Terminology and commercial specifications

ISO 7133:2013 Earth-moving machinery – Scrapers – Terminology and commercial specifications

ISO 7134:2013 Earth-moving machinery – Graders – Terminology and commercial specifications

ISO 7135:2009 Earth-moving machinery – Hydraulic excavators – Terminology and commercial specifications

ISO 7136:2006 Earth-moving machinery – Pipelayers – Terminology and commercial specifications

ISO 7137:1995 Aircraft – Environmental conditions and test procedures for airborne equipment

ISO 7144:1986 Documentation – Presentation of theses and similar documents

ISO 7151:1988 Surgical instruments – Non-cutting, articulated instruments – General requirements and test methods

ISO 7152:1997 Camping tents and caravan awnings – Vocabulary and list of equivalent terms

ISO 7153 Surgical instruments – Materials

ISO 7153-1:2016 Part 1: Metals

ISO 7154:1983 Documentation – Bibliographic filing principles

ISO 7176 Wheelchairs

ISO 7176-21:2009 Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers

ISO 7176-26:2007 Part 26: Vocabulary

ISO 7185:1990 Information technology – Programming languages – Pascal

ISO 7194:2008 Measurement of fluid flow in closed conduits – Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes

ISO 7196:1995 Acoustics – Frequency-weighting characteristic for infrasound measurements

ISO 7197:2006 Neurosurgical implants – Sterile, single-use hydrocephalus shunts and components

ISO 7198:2016 Cardiovascular implants and extracorporeal systems – Vascular prostheses – Tubular vascular grafts and vascular patches

ISO 7199:2016 Cardiovascular implants and artificial organs – Blood-gas exchangers (oxygenators)

ISO 7200:2004 Technical product documentation – Data fields in title blocks and document headers

ISO 7206 Implants for surgery – Partial and total hip joint prostheses

ISO 7206-1:2008 Part 1: Classification and designation of dimensions

ISO 7206-2:2011 Part 2: Articulating surfaces made of metallic, ceramic and plastics materials

ISO 7206-4:2010 Part 4: Determination of endurance properties and performance of stemmed femoral components

ISO 7206-6:2013 Part 6: Endurance properties testing and performance requirements of neck region of stemmed femoral components

ISO 7206-10:2003 Part 10: Determination of resistance to static load of modular femoral heads

ISO 7206-12:2016 Part 12: Deformation test method for acetabular shells

ISO 7206-13:2016 Part 13: Determination of resistance to torque of head fixation of stemmed femoral components

ISO 7207 Implants for surgery – Components for partial and total knee joint prostheses

ISO 7207-1:2007 Part 1: Classification, definitions and designation of dimensions

ISO 7207-2:2011 Part 2: Articulating surfaces made of metal, ceramic and plastics materials

ISO 7216:2015 Agricultural and forestry tractors – Measurement of noise emitted when in motion

ISO 7218:2007 Microbiology of food and animal feeding stuffs – General requirements and guidance for microbiological examinations

ISO 7220:1996 Information and documentation – Presentation of catalogues of standards

ISO 7237:1993 Caravans – Masses and dimensions – Vocabulary

ISO 7240 Fire detection and alarm systems

Daftar Standar ISO 7250-7499

ISO 7251:2005 Microbiology of food and animal feeding stuffs – Horizontal method for the detection and enumeration of presumptive Escherichia coli – Most probable number technique

ISO 7255:1985 Shipbuilding – Active control units of ships – Vocabulary

ISO 7275:1985 Documentation – Presentation of title information of series

ISO 7287:2002 Graphical symbols for thermal cutting equipment

ISO 7294:1983 Saw teeth for woodworking saws – Profile shape – Terminology and designation

ISO 7296 Cranes – Graphic symbols

ISO 7296-1:1991 Part 1: General

ISO 7296-2:1996 Part 2: Mobile cranes

ISO 7296-3:2006 Part 3: Tower cranes

ISO 7297:1985 Information processing – Magnetic disk for data storage devices – 96 000 flux transitions per track, 200 mm (7.9 in) outer diameter, 63,5 mm (2.5 in) inner diameter

ISO 7298:1985 Information processing – Magnetic disk for data storage devices – 158 000 flux transitions per track, 210 mm (8.3 in) outer diameter, 100 mm (3.9 in) inner diameter

ISO 7345:1987 Thermal insulation – Physical quantities and definitions

ISO 7347:1987 Ferroalloys – Experimental methods for checking the bias of sampling and sample preparation

ISO 7348:1992 Glass containers – Manufacture – Vocabulary

ISO/IEC 7350:1991 Information technology – Registration of repertoires of graphic characters from ISO/IEC 10367

ISO 7369:2004 Pipework – Metal hoses and hose assemblies – Vocabulary

ISO 7372:2005 Trade data interchange – Trade data elements directory

ISO 7373:1987 Ferroalloys – Experimental methods for checking the precision of sample division

ISO 7376:2009 Anaesthetic and respiratory equipment – Laryngoscopes for tracheal intubation

ISO 7396 Medical gas pipeline systems

ISO 7396-1:2016 Part 1: Pipeline systems for compressed medical gases and vacuum

ISO 7396-2:2007 Part 2: Anaesthetic gas scavenging disposal systems

ISO 7404 Methods for the petrographic analysis of coals

ISO 7404-1:2016 Part 1: Vocabulary

ISO 7437:1990 Technical drawings – Construction drawings – General rules for execution of production drawings for prefabricated structural components

ISO 7462:1985 Shipbuilding – Principal ship dimensions – Terminology and definitions for computer applications

ISO 7478:1987 Information processing systems – Data communication – Multilink procedures

ISO/IEC 7480:1991 Information technology – Telecommunications and information exchange between systems – Start-stop transmission signal quality at DTE/DCE interfaces

ISO 7482 Raw goat skins

ISO 7482-1:1998 Part 1: Descriptions of defects

ISO/IEC 7487 Information technology – Data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on both sides – ISO type 202

ISO/IEC 7487-1:1993 Part 1: Dimensional, physical and magnetic characteristics

ISO 7487-2:1985 Part 2: Track format A

ISO 7487-3:1986 Part 3: Track format B

ISO/IEC 7498 Information technology — Open Systems Interconnection — Basic Reference Model[Note 3]

ISO/IEC 7498-1:1994 The Basic Model

ISO 7498-2:1989 Part 2: Security Architecture

ISO/IEC 7498-3:1997 Naming and addressing

ISO/IEC 7498-4:1989 Part 4: Management framework

Daftar Standar ISO 7500-7749

ISO/IEC 7501 Identification cards – Machine readable travel documents

ISO/IEC 7501-1:2008 Part 1: Machine readable passport

ISO/IEC 7501-2:1997 Part 2: Machine readable visa

ISO/IEC 7501-3:2005 Part 3: Machine readable official travel documents

ISO 7504:2015 Gas analysis – Vocabulary

ISO 7518:1983 Technical drawings – Construction drawings – Simplified representation of demolition and rebuilding

ISO 7519:1991 Technical drawings – Construction drawings – General principles of presentation for general arrangement and assembly drawings

ISO 7520:1985 Ferronickel – Determination of cobalt content – Flame atomic absorption spectrometric method

ISO 7524:1985 Nickel, ferronickel and nickel alloys – Determination of carbon content – Infra-red absorption method after induction furnace combustion

ISO 7526:1985 Nickel, ferronickel and nickel alloys – Determination of sulfur content – Infra-red absorption method after induction furnace combustion

ISO 7527:1985 Nickel, ferronickel and nickel alloys – Determination of sulfur content – Iodimetric titration method after induction furnace combustion

ISO 7550:1985 Laboratory glassware – Disposable micropipettes

ISO 7563:1998 Fresh fruits and vegetables – Vocabulary

ISO 7568:1986 Woodworking machines – Thickness planing machines with rotary cutterblock for one-side dressing – Nomenclature and acceptance conditions

ISO 7569:1986 Woodworking machines – Planing machines for two-, three- or four-side dressing – Nomenclature and acceptance conditions

ISO 7570:1986 Woodworking machines – Surface planing and thicknessing machines – Nomenclature and acceptance conditions

ISO 7571:1986 Woodworking machines – Surface planing machines with cutterblock for one-side dressing – Nomenclature and acceptance conditions

ISO 7573:2008 Technical product documentation – Parts lists

ISO 7574 Acoustics – Statistical methods for determining and verifying stated noise emission values of machinery and equipment

ISO 7574-1:1985 Part 1: General considerations and definitions

ISO 7574-2:1985 Part 2: Methods for stated values for individual machines

ISO 7574-3:1985 Part 3: Simple (transition) method for stated values for batches of machines

ISO 7574-4:1985 Part 4: Methods for stated values for batches of machines

ISO 7583:2013 Anodizing of aluminium and its alloys – Terms and definitions

ISO 7626 Mechanical vibration and shock – Experimental determination of mechanical mobility[Note 3]

ISO 7626-1:2011 Part 1: Basic terms and definitions, and transducer specifications

ISO 7626-2:2015 Part 2: Measurements using single-point translation excitation with an attached vibration exciter

ISO 7626-5:1994 Part 5: Measurements using impact excitation with an exciter which is not attached to the structure

ISO 7637 Road vehicles – Electrical disturbances from conduction and coupling

ISO 7637-1:2015 Part 1: Definitions and general considerations

ISO 7639:1985 Road vehicles – Diagnostic systems – Graphical symbols

ISO 7665:1983 Information processing – File structure and labelling of flexible disk cartridges for information interchange

ISO 7692:1983 Ferrotitanium – Determination of titanium content – Titrimetric method

ISO 7693:1984 Ferrotungsten – Determination of tungsten content – Cinchonine gravimetric method

ISO 7704:1985 Water quality – Evaluation of membrane filters used for microbiological analyses

ISO 7711 Dentistry – Diamond rotary instruments

ISO 7711-3:2004 Part 3: Grit sizes, designation and colour code

ISO 7712:1983 Laboratory glassware – Disposable Pasteur pipettes

ISO 7736 Road vehicles – Car radio for front installation – Installation space including connections

ISO 7740:1985 Instruments for surgery – Scalpels with detachable blades – Fitting dimensions

ISO 7741:1986 Instruments for surgery – Scissors and shears – General requirements and test methods

Daftar Standar ISO 7750-7999

ISO/IEC 7776:1995 Information technology – Telecommunications and information exchange between systems – High-level data link control procedures – Description of the X.25 LAPB-compatible DTE data link procedures

ISO 7779:2010 Acoustics – Measurement of airborne noise emitted by information technology and telecommunications equipment

ISO/IEC 7810 Identification cards – Physical characteristics

ISO/IEC 7811 Identification cards – Recording technique

ISO/IEC 7812 Identification cards – Identification of issuers

ISO/IEC 7813:2006 Information technology – Identification cards – Financial transaction cards

ISO/IEC 7816 Identification cards – Integrated circuit cards[Note 3]

ISO 7839:2005 Textile machinery and accessories – Knitting machines – Vocabulary and classification

ISO/TS 7849 Acoustics – Determination of airborne sound power levels emitted by machinery using vibration measurement

ISO/TS 7849-1:2009 Part 1: Survey method using a fixed radiation factor

ISO/TS 7849-2:2009 Part 2: Engineering method including determination of the adequate radiation factor

ISO 7863:1984 Height setting micrometers and riser blocks

ISO 7864:2016 Sterile hypodermic needles for single use – Requirements and test methods

ISO 7870 Control charts

ISO 7870-1:2014 Part 1: General guidelines

ISO 7870-2:2013 Part 2: Shewhart control charts

ISO 7870-3:2012 Part 3: Acceptance control charts

ISO 7870-4:2011 Part 4: Cumulative sum charts

ISO 7870-5:2014 Part 5: Specialized control charts

ISO 7870-6:2016 Part 6: EWMA control charts

ISO 7870-8:2017 Part 8: Charting techniques for short runs and small mixed batches

ISO 7876 Fuel injection equipment – Vocabulary

ISO 7876-1:1990 Part 1: Fuel injection pumps

ISO 7876-2:1991 Part 2: Fuel injectors

ISO 7876-3:1993 Part 3: Unit injectors

ISO 7876-4:2004 Part 4: High-pressure pipes and end-connections

ISO 7876-5:2004 Part 5: Common rail fuel injection system

ISO 7885:2010 Dentistry – Sterile injection needles for single use

ISO 7886 Sterile hypodermic syringes for single use

ISO 7886-1:2017 Part 1: Syringes for manual use

ISO 7886-2:1996 Part 2: Syringes for use with power-driven syringe pumps

ISO 7886-3:2005 Part 3: Auto-disable syringes for fixed-dose immunization

ISO 7886-4:2006 Part 4: Syringes with re-use prevention feature

ISO 7889:2003 Yogurt – Enumeration of characteristic microorganisms – Colony-count technique at 37 degrees C

ISO 7899 Water quality – Detection and enumeration of intestinal enterococci

ISO 7899-1:1998 Part 1: Miniaturized method (Most Probable Number) for surface and waste water

ISO 7899-2:2000 Part 2: Membrane filtration method

ISO 7919 Mechanical vibration – Evaluation of machine vibration by measurements on rotating shafts

ISO 7919-3:2009 Part 3: Coupled industrial machines

ISO 7919-4:2009 Part 4: Gas turbine sets with fluid-film bearings

ISO 7919-5:2005 Part 5: Machine sets in hydraulic power generating and pumping plants

ISO 7929:1985 Information processing – Magnetic disk for data storage devices – 83 000 flux transitions per track, 130 mm (5.12 in) outer diameter, 40 mm (1.57 in) inner diameter

ISO 7932:2004 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of presumptive Bacillus cereus – Colony-count technique at 30 degrees C

ISO 7937:2004 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of Clostridium perfringens – Colony-count technique

ISO/IEC 7942 Information technology – Computer graphics and image processing – Graphical Kernel System (GKS)

ISO 7944:1998 Optics and optical instruments – Reference wavelengths

ISO 7945:1985 Woodworking machines – Single spindle boring machines – Nomenclature and acceptance conditions

ISO 7946:1985 Woodworking machines – Slot mortising machines – Nomenclature and acceptance conditions

ISO 7947:1985 Woodworking machines – Two-, three- and four-side moulding machines – Nomenclature and acceptance conditions

ISO 7948:1987 Woodworking machines – Routing machines – Nomenclature and acceptance conditions

ISO 7949:1985 Woodworking machines – Veneer pack edge shears – Nomenclature and acceptance conditions

ISO 7950:1985 Woodworking machines – Single chain mortising machines – Nomenclature and acceptance conditions

ISO 7957:1987 Woodworking machines – Radial circular saws – Nomenclature and acceptance conditions

ISO 7958:1987 Woodworking machines – Single blade stroke circular sawing machines for lengthwise cutting of solid woods and panels – Nomenclature and acceptance conditions

ISO 7959:1987 Woodworking machines – Double edging precision circular sawing machines – Nomenclature and acceptance conditions

ISO 7960:1995 Airborne noise emitted by machine tools – Operating conditions for woodworking machines

ISO 7967 Reciprocating internal combustion engines – Vocabulary of components and systems

ISO 7967-1:2005 Part 1: Structure and external covers

ISO 7967-2:2010 Part 2: Main running gear

ISO 7967-3:2010 Part 3: Valves, camshaft drives and actuating mechanisms

ISO 7967-4:2005 Part 4: Pressure charging and air/exhaust gas ducting systems

ISO 7967-5:2010 Part 5: Cooling systems

ISO 7967-6:2005 Part 6: Lubricating systems

ISO 7967-7:2005 Part 7: Governing systems

ISO 7967-8:2005 Part 8: Starting systems

ISO 7967-9:2010 Part 9: Control and monitoring systems

ISO 7967-10:2014 Part 10: Ignition systems

ISO 7967-11:2014 Part 11: Fuel systems

ISO 7967-12:2014 Part 12: Exhaust emission control systems

ISO 7983:1988 Woodworking machines – Single blade circular sawing machines with travelling table – Nomenclature and acceptance conditions

ISO 7987:1985 Woodworking machines – Turning lathes – Nomenclature and acceptance conditions

ISO 7988:1988 Woodworking machines – Double-end tenoning machines – Nomenclature and acceptance conditions

ISO 7998:2005 Ophthalmic optics – Spectacle frames – Lists of equivalent terms and vocabulary

Update Daftar

Untuk daftar lengkap dan terbaru dari semua standar ISO setiap saat, bisa dilihat pada katalog ISO di web resmi ISO international berikut :

https://www.iso.org/standards-catalogue/browse-by-ics.html

Demikian artikel dari standarku.com mengenai Daftar Standar ISO 7000-7999.

Mohon saran dari pembaca untuk kelengkapan isi artikel ini, silahkan saran tersebut dapat disampaikan melalui kolom komentar.

Baca artikel lain :

Sumber referensi :

Leave a Comment