Daftar Standar ISO 100-199 adalah kumpulan judul dari Standar ISO nomor 100-199 yang diterbitkan oleh badan ISO Internasional.
Mengenai Standar ISO
ISO (International Organization for Standardization) adalah suatu organisasi atau lembaga nirlaba internasional, yang bertujuan untuk membuat dan memperkenalkan standar dan standardisasi internasional untuk berbagai tujuan.
ISO telah mengembangkan lebih dari 23,755 Standar Internasional dan semuanya tercantum di dalam katalog Standar ISO.
Isi dari standar ISO ini dilindungi oleh hak cipta dan sebagian besar harus melakukan proses pembelian untuk dapat mengakses keseluruhan isinya.
Namun ada sekitar 300 standar yang diproduksi oleh ISO dan IEC Joint Technical Committee (JTC1) telah dinyatakan bersifat bebas dan tersedia untuk umum.
Lebih jelas mengenai Standar ISO dan Badan ISO dapat dibaca pada artikel lain dari standarku.com berikut :
Standar Kerjasama
Didalam daftar standar ISO juga terdapat standar lain hasil kerjasama badan standardisasi lain dengan standar ISO seperti :
- IEC (International Electrotechnical Commission)
- IWA (International Workshop Agreement)
IEC adalah organisasi standardisasi internasional yang menyusun dan menerbitkan standar-standar internasional untuk seluruh bidang elektrik, elektronik dan teknologi yang terkait atau bidang teknologi elektro (electrotechnology).
Lebih jelas mengenai IEC dapat dibaca pada artikel lain dari standarku.com berikut :
IWA adalah dokumen ISO yang dihasilkan bukan melalui proses komite teknis ISO secara penuh, namun melalui workshop meeting.
Pelaku pasar dan pemangku kepentingan lainnya dapat berpartisipasi langsung dalam mengembangkan IWA dan tidak harus melalui delegasi nasional.
Ini adalah cara cepat untuk mendapatkan dokumen ISO yang diakui, prosesnya tidak boleh memakan waktu total lebih dari 12 bulan.
Prosesnya dirancang agar fleksibel dan sebagian besar diputuskan oleh organisasi yang mengajukan.
Daftar Standar ISO 100-199
Keseluruhan Daftar Standar ISO adalah dari ISO 1 hingga ISO 99999, namun terlalu panjang untuk ditampilkan semua pada halaman ini.
Untuk itu kami telah membaginya menjadi beberapa postingan, yang dimulai pada postingan sebelumnya berikut :
- Daftar Standar ISO (ISO 1-99)
Selanjutnya pada postingan kali ini akan menampilkan Standar ISO seri ISO 100-199.
Daftar Standar ISO 100 – ISO 109
ISO 100:1984 Pulleys for flat transmission belts — Crowns [Withdrawn: replaced with ISO 22]
ISO/R 101:1959 Width of sheets of paper [Withdrawn without replacement]
ISO 102:1990 Aircraft — Gravity filling orifices
ISO 104:2015 Rolling bearings — Thrust bearings — Boundary dimensions, general plan
ISO 105 Textiles — Tests for colour fastness
ISO 105-A01:2010 Part A01: General principles of testing
ISO 105-A02:1993 Part A02: Grey scale for assessing change in colour
ISO 105-A03:2019 Part A03: Grey scale for assessing staining
ISO 105-A04:1989 Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics
ISO 105-A05:1996 Part A05: Instrumental assessment of change in colour for determination of grey scale rating
ISO 105-A06:1995 Part A06: Instrumental determination of 1/1 standard depth of colour
ISO 105-A08:2001 Part A08: Vocabulary used in colour measurement
ISO 105-A11:2012 Part A11: Determination of colour fastness grades by digital imaging techniques
ISO 105-B01:2014 Part B01: Colour fastness to light: Daylight
ISO 105-B02:2014 Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
ISO 105-B03:2017 Part B03: Colour fastness to weathering: Outdoor exposure
ISO 105-B04:1994 Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test
ISO 105-B05:1993 Part B05: Detection and assessment of photochromism
ISO 105-B06:2020 Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
ISO 105-B07:2009 Part B07: Colour fastness to light of textiles wetted with artificial perspiration
ISO 105-B08:1995 Part B08: Quality control of blue wool reference materials 1 to 7
ISO 105-B10:2011 Part B10: Artificial weathering — Exposure to filtered xenon-arc radiation
ISO 105-C01:1989 Part C01: Colour fastness to washing: Test 1 [Withdrawn: replaced with ISO 105-C10]
ISO 105-C02:1989 Part C02: Colour fastness to washing: Test 2 [Withdrawn: replaced with ISO 105-C10]
ISO 105-C03:1989 Part C03: Colour fastness to washing: Test 3 [Withdrawn: replaced with ISO 105-C10]
ISO 105-C04:1989 Part C04: Colour fastness to washing: Test 4 [Withdrawn: replaced with ISO 105-C10]
ISO 105-C05:1989 Part C05: Colour fastness to washing: Test 5 [Withdrawn: replaced with ISO 105-C10]
ISO 105-C06:2010 Part C06: Colour fastness to domestic and commercial laundering
ISO 105-C07:1999 Part C07: Colour fastness to wet scrubbing of pigment printed textiles
ISO 105-C08:2010 Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator
ISO 105-C09:2001 Part C09: Colour fastness to domestic and commercial laundering — Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator
ISO 105-C10:2006 Part C10: Colour fastness to washing with soap or soap and soda
ISO 105-C12:2004 Part C12: Colour fastness to industrial laundering
ISO 105-D01:2010 Part D01: Colour fastness to drycleaning using perchloroethylene solvent
ISO 105-D02:2016 Part D02: Colour fastness to rubbing: Organic solvents
ISO 105-E01:2013 Part E01: Colour fastness to water
ISO 105-E02:2013 Part E02: Colour fastness to sea water
ISO 105-E03:2010 Part E03: Colour fastness to chlorinated water (swimming-pool water)
ISO 105-E04:2013 Part E04: Colour fastness to perspiration
ISO 105-E05:2010 Part E05: Colour fastness to spotting: Acid
ISO 105-E06:2006 Part E06: Colour fastness to spotting: Alkali
ISO 105-E07:2010 Part E07: Colour fastness to spotting: Water
ISO 105-E08:1994 Part E08: Colour fastness to hot water
ISO 105-E09:2010 Part E09: Colour fastness to potting
ISO 105-E10:1994 Part E10: Colour fastness to decatizing
ISO 105-E11:1994 Part E11: Colour fastness to steaming
ISO 105-E12:2010 Part E12: Colour fastness to milling: Alkaline milling
ISO 105-E13:1994 Part E13: Colour fastness to acid-felting: Severe
ISO 105-E14:1994 Part E14: Colour fastness to acid-felting: Mild
ISO 105-E16:2006 Part E16: Colour fastness to water spotting on upholstery fabrics
ISO 105-F01:2001 Part F01: Specification for wool adjacent fabric
ISO 105-F02:2009 Part F02: Specification for cotton and viscose adjacent fabrics
ISO 105-F03:2001 Part F03: Specification for polyamide adjacent fabric
ISO 105-F04:2001 Part F04: Specification for polyester adjacent fabric
ISO 105-F05:2001 Part F05: Specification for acrylic adjacent fabric
ISO 105-F06:2000 Part F06: Specification for silk adjacent fabric
ISO 105-F07:2001 Part F07: Specification for secondary acetate adjacent fabric
ISO 105-F09:2009 Part F09: Specification for cotton rubbing cloth
ISO 105-F10:1989 Part F10: Specification for adjacent fabric: Multifibre
ISO 105-G01:2016 Part G01: Colour fastness to nitrogen oxides
ISO 105-G02:1993 Part G02: Colour fastness to burnt-gas fumes
ISO 105-G03:1993 Part G03: Colour fastness to ozone in the atmosphere
ISO 105-G04:2016 Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities
ISO 105-J01:1997 Part J01: General principles for measurement of surface colour
ISO 105-J02:1997 Part J02: Instrumental assessment of relative whiteness
ISO 105-J03:2009 Part J03: Calculation of colour differences
ISO 105-J05:2007 Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02)
ISO 105-N01:1993 Part N01: Colour fastness to bleaching: Hypochlorite
ISO 105-N02:1993 Part N02: Colour fastness to bleaching: Peroxide
ISO 105-N03:1993 Part N03: Colour fastness to bleaching: Sodium chlorite (mild)
ISO 105-N04:1993 Part N04: Colour fastness to bleaching: Sodium chlorite (severe)
ISO 105-N05:1993 Part N05: Colour fastness to stoving
ISO 105-P01:1993 Part P01: Colour fastness to dry heat (excluding pressing)
ISO 105-P02:2002 Part P02: Colour fastness to pleating: Steam pleating
ISO 105-S01:1993 Part S01: Colour fastness to vulcanization: Hot air
ISO 105-S02:1993 Part S02: Colour fastness to vulcanization: Sulfur monochloride
ISO 105-S03:1993 Part S03: Colour fastness to vulcanization: Open steam
ISO 105-X01:1993 Part X01: Colour fastness to carbonizing: Aluminium chloride
ISO 105-X02:1993 Part X02: Colour fastness to carbonizing: Sulfuric acid
ISO 105-X03:1987 Part X03: Colour fastness to chlorination [Withdrawn without replacement]
ISO 105-X04:1994 Part X04: Colour fastness to mercerizing
ISO 105-X05:1994 Part X05: Colour fastness to organic solvents
ISO 105-X06:1994 Part X06: Colour fastness to soda boiling
ISO 105-X07:1994 Part X07: Colour fastness to cross-dyeing: Wool
ISO 105-X08:1994 Part X08: Colour fastness to degumming
ISO 105-X09:1993 Part X09: Colour fastness to formaldehyde
ISO 105-X10:1993 Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings
ISO 105-X11:1994 Part X11: Colour fastness to hot pressing
ISO 105-X12:2016 Part X12: Colour fastness to rubbing
ISO 105-X13:1994 Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting
ISO 105-X14:1994 Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate
ISO 105-X16:2016 Part X16: Colour fastness to rubbing — Small areas
ISO 105-X18:2007 Part X18: Assessment of the potential to phenolic yellowing of materials
ISO 105-X19:2020 Part X19: Colour fastness to rubbing (Gakushin test method)
ISO 105-Z01:1993 Part Z01: Colour fastness to metals in the dye-bath: Chromium salts
ISO 105-Z02:1993 Part Z02: Colour fastness to metals in the dye-bath: Iron and copper
ISO 105-Z03:1996 Part Z03: Intercompatibility of basic dyes for acrylic fibres
ISO 105-Z04:1995 Part Z04: Dispersibility of disperse dyes
ISO 105-Z05:1996 Part Z05: Determination of the dusting behaviour of dyes
ISO 105-Z06:1998 Part Z06: Evaluation of dye and pigment migration
ISO 105-Z07:1995 Part Z07: Determination of application solubility and solution stability of water-soluble dyes
ISO 105-Z08:1995 Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes
ISO 105-Z09:1995 Part Z09: Determination of cold water solubility of water-soluble dyes
ISO 105-Z10:1997 Part Z10: Determination of relative colour strength of dyes in solution
ISO 105-Z11:1998 Part Z11: Evaluation of speckiness of colorant dispersions
ISO 108:1976 Textile machinery and accessories — Weaving looms — Definition of left and right sides
ISO 109:1982 Textile machinery — Working widths of weaving machines
Daftar Standar ISO 110 – ISO 119
ISO 110:1978 Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 9 degrees 15′ [Withdrawn without replacement]
ISO 111:1978 Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 4 degrees 20′ [Withdrawn: Replaced with ISO 8489-3]
ISO 112:1983 Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 3 degrees 30′ [Withdrawn: Replaced with ISO 8489-2]
ISO 113:2010 Rolling bearings — Plummer block housings — Boundary dimensions
ISO 114:1980 99.8 Unalloyed magnesium ingots — Chemical composition [Withdrawn: Replaced by ISO 8287]
ISO 115:2003 Unalloyed aluminium ingots for remelting — Classification and composition
ISO/R 117:1959 Plastics — Phenol-formaldehyde mouldings — Determination of water absorption [Withdrawn: replaced by ISO 62]
ISO 119:1977 Plastics — Phenol-formaldehyde mouldings — Determination of free phenols — Iodometric method
Daftar Standar ISO 120 – ISO 129
ISO 120:1977 Plastics — Phenol-formaldehyde mouldings — Determination of free ammonia and ammonium compounds — Colorimetric comparison method
ISO 121:1980 Magnesium-aluminium-zinc alloy ingots and alloy castings — Chemical composition and mechanical properties of sand cast reference test bars [Withdrawn: replaced by ISO 16220]
ISO/R 122:1959 Composition of magnesium-aluminium-zinc alloy ingots for casting purposes [Withdrawn: replaced by ISO 121, and later ISO 16220]
ISO 123:2001 Rubber latex — Sampling
ISO 124:2014 Latex, rubber — Determination of total solids content
ISO 125:2020 Natural rubber latex concentrate — Determination of alkalinity
ISO 126:2005 Natural rubber latex concentrate — Determination of dry rubber content
ISO 127:2018 Rubber, natural latex concentrate — Determination of KOH number
ISO 128 Technical product documentation — General principles of representation[Note 3]
ISO 129 Technical product documentation — Indication of dimensions and tolerances[Note 3]
ISO 129-1:2018 Part 1: General principles
ISO 129-4:2013 Part 4: Dimensioning of shipbuilding drawings
ISO 129-5:2018 Part 5: Dimensioning of structural metal work
Daftar Standar ISO 130 – ISO 139
ISO 131:1979 Acoustics — Expression of physical and subjective magnitudes of sound or noise in air [Withdrawn without replacement]
ISO 132:2017 Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack growth (De Mattia)
ISO 133:1983 Rubber, vulcanized — Determination of crack growth (De Mattia) [Withdrawn: Replaced with ISO 132]
ISO 134:1973 Steel — Determination of crack growth [Withdrawn: Replaced with ISO 4200:1991]
ISO/R 135:1959 Paper vocabulary — Second series of terms [Withdrawn: Replaced with ISO 4046]
ISO 136:1972 Steel — Simple torsion testing of wire [Withdrawn: replaced by ISO 7800]
ISO 137:2015 Wool — Determination of fibre diameter — Projection microscope method
ISO 139:2005 Textiles — Standard atmospheres for conditioning and testing
Daftar Standar ISO 140 – ISO 149
ISO 140 Acoustics — Measurement of sound insulation in buildings and of building elements
ISO 140-1:1997 Part 1: Requirements for laboratory test facilities with suppressed flanking transmission [Withdrawn: replaced by ISO 10140-(1-5)]
ISO 140-2:1991 Part 2: Determination, verification and application of precision data [Withdrawn: replaced by ISO 12999-1:2014]
ISO 140-3:1995 Part 3: Laboratory measurements of airborne sound insulation of building elements [Withdrawn: replaced by ISO 10140-(1-5)]
ISO 140-4:1998 Part 4: Field measurements of airborne sound insulation between rooms [Withdrawn: replaced by ISO 16283-1:2014]
ISO 140-5:1998 Part 5: Field measurements of airborne sound insulation of façade elements and façades [Withdrawn: replaced by ISO 16283-(1,3):2014]
ISO 140-6:1998 Part 6: Laboratory measurements of impact sound insulation of floors [Withdrawn: replaced by ISO 10140-(1-5)]
ISO 140-7:1998 Part 7: Field measurements of impact sound insulation of floors [Withdrawn: replaced by ISO 16283-(1-2)]
ISO 140-8:1997 Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor [Withdrawn: replaced by ISO 10140-(1-5)]
ISO 140-9:1985 Part 9: Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it [Withdrawn: replaced by ISO 10848-2]
ISO 140-10:1991 Part 10: Laboratory measurement of airborne sound insulation of small building elements [Withdrawn: replaced by ISO 10140-(1-5)]
ISO 140-11:1991 Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors [Withdrawn: replaced by ISO 10140-(1-5)]
ISO 140-12:2000 Part 12: Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor [Withdrawn: replaced by ISO 10848-2]
ISO/TR 140-13:1997 Part 13: Guidelines [Withdrawn: replaced by ISO 140-14]
ISO 140-14:2004 Part 14: Guidelines for special situations in the field [Withdrawn: replaced by ISO 16283-1:2014]
ISO 140-16:2006 Part 16: Laboratory measurement of the sound reduction index improvement by additional lining [Withdrawn: replaced by ISO 10140-(1-5)]
ISO 140-18:2006 Part 18: Laboratory measurement of sound generated by rainfall on building elements [Withdrawn: replaced by ISO 10140-(1,5):2016]
ISO 141:1976 Textile machinery and accessories — Pirn winders and cross winders — Definition of left and right sides
ISO 142:1976 Textile machinery and accessories — Weaving preparatory machines — Definition of left and right sides
ISO 143:1977 Textile machinery and accessories — Weft pirns for automatic looms [Withdrawn without replacement]
ISO 144:1973 Steel — Reverse bend testing of wire [Withdrawn: replaced with ISO 7801]
ISO/R 145:1960 Steel — Wrapping test for wire [Withdrawn: replaced with ISO 7802]
ISO 146:1984 Metallic materials — Hardness test — Verification of Vickers hardness testing machines HV 0,2 to HV 100 [Withdrawn: replaced with ISO 6507-2]
ISO 146-2:1993 Metallic materials — Verification of Vickers hardness testing machines — Part 2: Less than HV 0,2 [Withdrawn: replaced with ISO 6507-2]
ISO/R 147:1960 Load calibration of testing machines for tensile testing of steel [Withdrawn: replaced with ISO 7500-1]
ISO 148 Metallic materials — Charpy pendulum impact test
ISO 148-1:2016 Part 1: Test method
ISO 148-2:2016 Part 2: Verification of testing machines
ISO 148-3:2016 Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
ISO/R 149:1960 Modified Erichsen cupping test for steel sheet and strip [Withdrawn: replaced with ISO 8490]
Daftar Standar ISO 150 – ISO 159
ISO 150:2018 Raw, refined and boiled linseed oil for paints and varnishes — Specifications and methods of test
ISO/R 154: Shipbuilding details — Marking of rolled, drawn and extruded products in light metals or in light alloys [Withdrawn without replacement]
ISO 155:2019 Belt drives — Pulleys — Limiting values for adjustment of centres
ISO 156:1982 Metallic materials — Hardness test — Verification of Brinell hardness testing machines [Withdrawn: replaced by ISO 6506-2]
ISO 157:1996 Coal — Determination of forms of sulfur
ISO/R 158:1960 Coal — Determination of ash [Withdrawn: replaced by ISO 1171]
Daftar Standar ISO 160 – ISO 169
ISO 160:1980 Asbestos-cement pressure pipes and joints [Withdrawn without replacement]
ISO 161 Thermoplastics pipes for the conveyance of fluids — Nominal outside diameters and nominal pressures
ISO 161-1:2018 Part 1: Metric series
ISO 161-2:1996 Part 2: Inch-based series
ISO 162:1985 Cinematography — Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture — Positions and width dimensions
ISO/R 164:1960 Composition of aluminium alloy castings [Withdrawn: replaced by ISO 3522]
ISO/R 165:1960 Flanging test on steel tubes [Withdrawn: replaced by ISO 8494]
ISO/R 166:1960 Drift expanding test on steel tubes [Withdrawn: replaced by ISO 8493]
ISO/R 167:1960 Bend test on steel tubes [Withdrawn: replaced by ISO 8491]
ISO/R 169:1960 Sizes of photocopies (on paper) readable without optical devices [Withdrawn without replacement]
Daftar Standar ISO 170 – ISO 179
ISO 171:1980 Plastics — Determination of bulk factor of moulding materials
ISO 172:1978 Plastics — Phenol-formaldehyde mouldings — Detection of free ammonia
ISO 174:1974 Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of viscosity number in dilute solution [Withdrawn replaced by ISO 1628-2]
ISO 175:2010 Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals
ISO 176:2005 Plastics — Determination of loss of plasticizers — Activated carbon method
ISO 177:2016 Plastics — Determination of migration of plasticizers
ISO 178:2019 Plastics — Determination of flexural properties
ISO 179 Plastics — Determination of Charpy impact properties
ISO 179-1:2010 Part 1: Non-instrumented impact test
ISO 179-2:2020 Part 2: Instrumented impact test
Daftar Standar ISO 180 – ISO 189
ISO 180:2019 Plastics — Determination of Izod impact strength
ISO 181:1981 Plastics — Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod [Withdrawn without replacement]
ISO 182 Plastics — Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures
ISO 182-1:1990 Part 1: Congo red method
ISO 182-2:1990 Part 2: pH method
ISO 182-3:1993 Part 3: Conductometric method
ISO 182-4:1993 Part 4: Potentiometric method
ISO 183:1976 Plastics — Qualitative evaluation of the bleeding of colorants [Withdrawn without replacement]
ISO/R 184:1961 Grey cast irons — Brinell hardness test [Withdrawn without replacement]
ISO 185:2020 Grey cast irons — Classification
ISO 186:2002 Paper and board — Sampling to determine average quality
ISO 187:1990 Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
ISO 188:2011 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
Daftar Standar ISO 190 – ISO 199
ISO 194:1981 Plastics — List of equivalent terms [Withdrawn: replaced by ISO 472:1988]
ISO 196:1978 Wrought copper and copper alloys — Detection of residual stress — Mercury(I) nitrate test
ISO 197 Copper and copper alloys — Terms and definitions
ISO 197-1:1983 Part 1: Materials
ISO 197-2:1983 Part 2: Unwrought products (Refinery shapes)
ISO 197-3:1983 Part 3: Wrought products
ISO 197-4:1983 Part 4: Castings
ISO 197-5:1980 Part 5: Methods of processing and treatment
ISO 199:2014 Rolling bearings — Thrust bearings — Geometrical product specification (GPS) and tolerance values
Update Daftar
Untuk daftar lengkap dan terbaru dari semua standar ISO setiap saat, bisa dilihat pada katalog ISO di web resmi ISO international berikut :
https://www.iso.org/standards-catalogue/browse-by-ics.html
Demikian artikel dari standarku.com mengenai Daftar Standar ISO 100-199.
Mohon saran dari pembaca untuk kelengkapan isi artikel ini, silahkan saran tersebut dapat disampaikan melalui kolom komentar.
Baca artikel lain :
Sumber referensi :