Daftar Standar ISO 3000-4999 adalah kumpulan judul dari Standar nomor ISO 3000 hingga ISO 4999 yang diterbitkan oleh badan ISO Internasional.
Mengenai Standar ISO
ISO (International Organization for Standardization) adalah suatu organisasi atau lembaga nirlaba internasional, yang bertujuan untuk membuat dan memperkenalkan standar dan standardisasi internasional untuk berbagai tujuan.
ISO telah mengembangkan lebih dari 23,755 Standar Internasional dan semuanya tercantum di dalam katalog Standar ISO.
Isi dari standar ISO ini dilindungi oleh hak cipta dan sebagian besar harus melakukan proses pembelian untuk dapat mengakses keseluruhan isinya.
Namun ada sekitar 300 standar yang diproduksi oleh ISO dan IEC Joint Technical Committee (JTC1) telah dinyatakan bersifat bebas dan tersedia untuk umum.
Lebih jelas mengenai Standar ISO dan Badan ISO dapat dibaca pada artikel lain dari standarku.com berikut :
Standar Kerjasama
Didalam daftar standar ISO juga terdapat standar lain hasil kerjasama badan standardisasi lain dengan standar ISO seperti :
- IEC (International Electrotechnical Commission)
- IWA (International Workshop Agreement)
IEC adalah organisasi standardisasi internasional yang menyusun dan menerbitkan standar-standar internasional untuk seluruh bidang elektrik, elektronik dan teknologi yang terkait atau bidang teknologi elektro (electrotechnology).
Lebih jelas mengenai IEC dapat dibaca pada artikel lain dari standarku.com berikut :
IWA adalah dokumen ISO yang dihasilkan bukan melalui proses komite teknis ISO secara penuh, namun melalui workshop meeting.
Pelaku pasar dan pemangku kepentingan lainnya dapat berpartisipasi langsung dalam mengembangkan IWA dan tidak harus melalui delegasi nasional.
Ini adalah cara cepat untuk mendapatkan dokumen ISO yang diakui, prosesnya tidak boleh memakan waktu total lebih dari 12 bulan.
Prosesnya dirancang agar fleksibel dan sebagian besar diputuskan oleh organisasi yang mengajukan.
Daftar Standar ISO 3000-4999
Keseluruhan Daftar Standar ISO adalah dari ISO 1 hingga ISO 99999, namun terlalu panjang untuk ditampilkan semua pada halaman ini.
Untuk itu kami telah membaginya menjadi beberapa postingan, yang dimulai pada postingan sebelumnya berikut :
- Daftar Standar ISO (ISO 1-99)
- Daftar Standar ISO 100-199
- Daftar Standar ISO 200-499
- Daftar Standar ISO 500-699
- Daftar Standar ISO 700-999
- Daftar Standar ISO 1000-2999
Selanjutnya pada postingan kali ini akan menampilkan Standar ISO seri ISO 3000 hingga ISO 4999.
Daftar Standar ISO 3000 – ISO 3499
ISO 3002 Basic quantities in cutting and grinding
ISO 3002-1:1982 Part 1: Geometry of the active part of cutting tools – General terms, reference systems, tool and working angles, chip breakers
ISO 3002-2:1982 Part 2: Geometry of the active part of cutting tools – General conversion formulae to relate tool and working angles
ISO 3002-3:1984 Part 3: Geometric and kinematic quantities in cutting
ISO 3002-4:1984 Part 4: Forces, energy, power
ISO 3002-5:1989 Part 5: Basic terminology for grinding processes using grinding wheels
ISO 3029:1995 Photography – 126-size cartridges – Dimensions of cartridge, film and backing paper [Withdrawn without replacement]
ISO 3040:2016 Geometrical product specifications (GPS) – Dimensioning and tolerancing – Cones
ISO 3046 Reciprocating internal combustion engines – Performance
ISO 3046-5:2001 Part 5: Torsional vibrations
ISO 3082 Iron ores – Sampling and sample preparation procedures
ISO 3095:2013 Acoustics – Railway applications – Measurement of noise emitted by railbound vehicles
ISO 3098 Technical product documentation – Lettering
ISO 3098-1:2015 Part 1: General requirements
ISO 3098-2:2000 Part 2: Latin alphabet, numerals and marks
ISO 3098-3:2000 Part 3: Greek alphabet
ISO 3098-4:2000 Part 4: Diacritical and particular marks for the Latin alphabet
ISO 3098-5:1997 Part 5: CAD lettering of the Latin alphabet, numerals and marks
ISO 3098-6:2000 Part 6: Cyrillic alphabet
ISO 3103 Tea – Preparation of liquor for use in sensory tests
ISO 3105:1994 Glass capillary kinematic viscometers – Specifications and operating instructions
ISO 3166 Codes for the representation of names of countries and their subdivisions
ISO 3166-1:2013 Part 1: Country codes
ISO 3166-2:2013 Part 2: Country subdivision code
ISO 3166-3:2013 Part 3: Code for formerly used names of countries
ISO 3252:1999 Powder metallurgy – Vocabulary
ISO 3272 Microfilming of technical drawings and other drawing office documents
ISO 3272-1:2003 Part 1: Operating procedures
ISO 3272-2:1994 Part 2: Quality criteria and control of 35 mm silver gelatin microfilms
ISO 3272-3:2001 Part 3: Aperture card for 35 mm microfilm
ISO 3272-4:1994 Part 4: Microfilming of drawings of special and exceptional elongated sizes
ISO 3272-6:2000 Part 6: Quality criteria and control of systems for enlargements from 35 mm microfilm
ISO 3274:1996 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Nominal characteristics of contact (stylus) instruments
ISO 3275:1974 Information processing – Implementation of the 7- bit coded character set and its 7- bit and 8- bit extensions on 3,81 mm magnetic cassette for data interchange
ISO 3287:1999 Powered industrial trucks – Symbols for operator controls and other displays
ISO 3297:2007 Information and documentation – International standard serial number (ISSN)
ISO 3301:1975 Statistical interpretation of data – Comparison of two means in the case of paired observations
ISO 3307:1975 Information interchange – Representations of time of the day [Withdrawn: replaced by ISO 8601:1988]
ISO 3354:2008 Measurement of clean water flow in closed conduits – Velocity-area method using current-meters in full conduits and under regular flow conditions
ISO 3381:2005 Railway applications – Acoustics – Measurement of noise inside railbound vehicles
ISO 3394:2012 Packaging – Complete, filled transport packages and unit loads – Dimensions of rigid rectangular packages
ISO 3407:1983 Information processing – Information interchange on 3,81 mm (0.150 in) magnetic tape cassette at 4 cpmm (100 cpi), phase encoded at 63 ftpmm (1 600 ftpi)
ISO 3408 Ball screws
ISO 3408-1:2006 Part 1: Vocabulary and designation
ISO 3454:2008 Hydrometry – Direct depth sounding and suspension equipment
ISO 3455:2007 Hydrometry – Calibration of current-meters in straight open tanks
ISO 3493:2014 Vanilla – Vocabulary
ISO 3494:1976 Statistical interpretation of data – Power of tests relating to means and variances
Daftar Standar ISO 3500 – ISO 3999
ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners
ISO 3507:1999 Laboratory glassware – Pyknometers
ISO 3509:2005 Coffee and coffee products – Vocabulary
ISO 3511 Industrial process measurement control functions and instrumentation – Symbolic representation[Note 3]
ISO 3511-1:1977 Part 1: Basic requirements
ISO 3511-2:1984 Part 2: Extension of basic requirements
ISO 3511-3:1984 Part 3: Detailed symbols for instrument interconnection diagrams
ISO 3511-4:1985 Part 4: Basic symbols for process computer, interface, and shared display/control functions
ISO 3529 Vacuum technology – Vocabulary
ISO 3529-1:1981 Part 1: General terms
ISO 3529-2:1981 Part 2: Vacuum pumps and related terms
ISO 3529-3:2014 Part 3: Total and partial pressure vacuum gauges
ISO 3534 Statistics – Vocabulary and symbols
ISO 3534-1:2006 Part 1: General statistical terms and terms used in probability
ISO 3534-2:2006 Part 2: Applied statistics
ISO 3534-3:2013 Part 3: Design of experiments
ISO 3534-4:2014 Part 4: Survey sampling
ISO 3535:1977 Forms design sheet and layout chart
ISO 3536:2016 Road vehicles – Safety glazing materials – Vocabulary
ISO 3537 Road vehicles – Safety glazing materials – Mechanical tests
ISO 3538 Road vehicles – Safety glazing materials – Test methods for optical properties
ISO 3540:1976 Paper or plastic printing ribbons – Characteristics of cores
ISO 3561:1976 Information processing – Interchangeable magnetic six-disk pack – Track format
ISO 3562:1976 Information processing – Interchangeable magnetic single-disk cartridge (top loaded) – Physical and magnetic characteristics
ISO 3563:1976 Information processing – Interchangeable magnetic single-disk cartridge (top loaded) – Track format
ISO 3564:1976 Information processing – Interchangeable magnetic eleven-disk pack – Physical and magnetic characteristics
ISO 3572:1976 Textiles – Weaves – Definitions of general terms and basic weaves
ISO 3591 Sensory analysis – Apparatus – Wine-tasting glass
ISO 3593 Starch — Determination of ash
ISO 3601 Fluid power systems – O-rings
ISO 3601-1 Inside diameters, cross-sections, tolerances and designation codes
ISO 3601-2 Housing dimensions for general applications
ISO 3601-3 Quality acceptance criteria
ISO 3601-4 Anti-extrusion rings (back-up rings)
ISO 3601-5 Suitability of elastomeric materials for industrial applications
ISO 3602:1989 Documentation – Romanization of Japanese (kana script)
ISO 3611:2010 Geometrical product specifications (GPS) – Dimensional measuring equipment: Micrometers for external measurements – Design and metrological characteristics
ISO 3632 Spices – Saffron (Crocus sativus L.)[Note 3]
ISO 3635:1981 Size designation of clothes – Definitions and body measurement procedure
ISO 3650:1998 Geometrical Product Specifications (GPS) – Length standards – Gauge blocks
ISO 3660:1976 Fishing nets – Mounting and joining of netting – Terms and illustrations
ISO/TR 3666:1998 Viscosity of water
ISO 3676:2012 Packaging – Complete, filled transport packages and unit loads – Unit load dimensions
ISO 3690 Welding and allied processes — Determination of hydrogen content in arc weld metal
ISO 3692:1976 Information processing – Reels and cores for 25,4 mm (1 in) perforated paper tape for information interchange – Dimensions
ISO 3713:1987 Ferroalloys – Sampling and preparation of samples – General rules
ISO 3715 Ships and marine technology – Propulsion plants for ships
ISO 3715-1:2002 Part 1: Vocabulary for geometry of propellers
ISO 3715-2:2001 Part 2: Vocabulary for controllable-pitch propeller plants
ISO/TS 3716:2006 Hydrometry – Functional requirements and characteristics of suspended-sediment samplers
ISO 3740:2000 Acoustics – Determination of sound power levels of noise sources – Guidelines for the use of basic standards
ISO 3741:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Precision methods for reverberation test rooms
ISO 3743 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods for small movable sources in reverberant fields[Note 3]
ISO 3743-1:2010 Part 1: Comparison method for a hard-walled test room
ISO 3743-2:1994 Part 2: Methods for special reverberation test rooms
ISO 3744:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods for an essentially free field over a reflecting plane
ISO 3745:2012 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Precision methods for anechoic rooms and hemi-anechoic rooms
ISO 3746:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Survey method using an enveloping measurement surface over a reflecting plane
ISO 3747:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering/survey methods for use in situ in a reverberant environment
ISO 3766:2003 Construction drawings – Simplified representation of concrete reinforcement
ISO 3767 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment – Symbols for operator controls and other displays
ISO 3767-1:2016 Part 1: Common symbols
ISO 3767-2:2016 Part 2: Symbols for agricultural tractors and machinery
ISO 3767-3:2016 Part 3: Symbols for powered lawn and garden equipment
ISO 3767-4:2016 Part 4: Symbols for forestry machinery
ISO 3767-5:2016 Part 5: Symbols for manual portable forestry machines
ISO/IEC 3788:1990 Information processing – 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange using phase encoding at 126 ftpmm (3 200 ftpi), 63 cpmm (1 600 cpi)
ISO 3791:1976 Office machines and data processing equipment – Keyboard layouts for numeric applications
ISO 3792:1976 Adding machines – Layout of function keyboard
ISO 3802:1976 Information processing – General purpose reels with 8 mm (5/16 in) centre hole for magnetic tape for interchange instrumentation applications
ISO 3819:2015 Laboratory glassware – Beakers
ISO 3822 Acoustics – Laboratory tests on noise emission from appliances and equipment used in water supply installations
ISO 3822-1:1999 Part 1: Method of measurement
ISO 3822-2:1995 Part 2: Mounting and operating conditions for draw-off taps and mixing valves
ISO 3822-3:1997 Part 3: Mounting and operating conditions for in-line valves and appliances
ISO 3822-4:1997 Part 4: Mounting and operating conditions for special appliances
ISO 3826 Plastics collapsible containers for human blood and blood components
ISO 3826-1:2013 Part 1: Conventional containers
ISO 3826-2:2008 Part 2: Graphical symbols for use on labels and instruction leaflets
ISO 3826-3:2006 Part 3: Blood bag systems with integrated features
ISO 3826-4:2015 Part 4: Aphaeresis blood bag systems with integrated features
ISO 3828:2008 Shipbuilding and marine structures – Deck machinery – Vocabulary and symbols
ISO 3833:1977 Road vehicles – Types – Terms and definitions
ISO 3835 Equipment for vine cultivation and wine making – Vocabulary
ISO 3835-1:1976 (No part title)
ISO 3835-3:1980 (No part title)
ISO 3835-4:1981 (No part title)
ISO 3846:2008 Hydrometry – Open channel flow measurement using rectangular broad-crested weirs
ISO 3847:1977 Liquid flow measurement in open channels by weirs and flumes – End-depth method for estimation of flow in rectangular channels with a free overfall
ISO 3855:1977 Milling cutters – Nomenclature
ISO 3857 Compressors, pneumatic tools and machines – Vocabulary
ISO 3857-1:1977 Part 1: General
ISO 3857-2:1977 Part 2: Compressors
ISO 3857-3:1989 Part 3: Pneumatic tools and machines
ISO 3857-4:2012 Part 4: Air treatment
ISO 3861:2005 Rubber hoses for sand and grit blasting – Specification
ISO 3864 Graphical symbols – Safety colours and safety signs
ISO 3866:1977 Office machines and printing machines used for information processing – Widths of fabric printing ribbons on spools exceeding 19 mm
ISO 3877 Tyres, valves and tubes – List of equivalent terms
ISO 3877-1:1997 Part 1: Tyres
ISO 3877-2:1997 Part 2: Tyre valves
ISO 3877-3:1978 Part 3: Tubes
ISO 3877-4:1984 Part 4: Solid tyres
ISO 3880 Building construction – Stairs – Vocabulary
ISO 3880-1:1977
ISO 3883:1977 Office machines – Line and character capacity of address masters
ISO 3901:2001 Information and documentation – International Standard Recording Code (ISRC)
ISO 3911:2004 Wheels and rims for pneumatic tyres – Vocabulary, designation and marking
ISO 3918:2007 Milking machine installations – Vocabulary
ISO 3950:2016 Dentistry – Designation system for teeth and areas of the oral cavity
ISO 3951 Sampling procedures for inspection by variables
ISO 3951-1:2013 Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
ISO 3951-2:2013 Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
ISO 3951-3:2007 Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
ISO 3951-4:2011 Part 4: Procedures for assessment of declared quality levels
ISO 3951-5:2006 Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
ISO 3952 Kinematic diagrams – Graphical symbols
ISO 3952-1:1981 (Motion of links of mechanisms; Kinematic pairs; Links and connections of their components; Linkage of bars and their links)
ISO 3952-2:1981 (Friction and gear mechanisms; Cam mechanisms)
ISO 3952-3:1979 (Maltese and ratchet mechanisms; Couplings and brakes)
ISO 3952-4:1984 (Miscellaneous mechanisms and their components)
ISO 3966:2008 Measurement of fluid flow in closed conduits – Velocity area method using Pitot static tubes
ISO 3977 Gas turbines – Procurement
Daftar Standar ISO 4000 – ISO 4499
ISO 4006:1991 Measurement of fluid flow in closed conduits – Vocabulary and symbols
ISO 4007:2012 Personal protective equipment – Eye and face protection – Vocabulary
ISO 4031:1978 Information interchange – Representation of local time differentials [Withdrawn: replaced by ISO 8601:1988]
ISO 4037 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy
ISO 4037-1:1996 Part 1: Radiation characteristics and production
ISO 4037-2:1997 Part 2: Dosimetry for radiation protection over the energy ranges from 8 keV to 1,3 MeV and 4 MeV to 9 MeV
ISO 4037-3:1999 Part 3: Calibration of area and personal dosemeters and the measurement of their response as a function of energy and angle of incidence
ISO 4037-4:2004 Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields
ISO 4046 Paper, board, pulps and related terms – Vocabulary
ISO 4046-1:2016 Part 1: Alphabetical index
ISO 4046-2:2016 Part 2: Pulping terminology
ISO 4046-3:2016 Part 3: Paper-making terminology
ISO 4046-4:2016 Part 4: Paper and board grades and converted products
ISO 4046-5:2016 Part 5: Properties of pulp, paper and board
ISO 4057:1986 Information processing – Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge, 63 bpmm (1 600 bpi) phase-encoded
ISO 4063:2009 Welding and allied processes – Nomenclature of processes and reference numbers
ISO 4074 Natural latex rubber condoms – Requirements and test methods
ISO 4087:2005 Micrographics – Microfilming of newspapers for archival purposes on 35 mm microfilm
ISO 4125:1991 Dry fruits and dried fruits – Definitions and nomenclature
ISO 4129:2012 Road vehicles – Mopeds – Symbols for controls, indicators and tell-tales
ISO 4130:1978 Road vehicles – Three-dimensional reference system and fiducial marks – Definitions
ISO 4135:2001 Anaesthetic and respiratory equipment – Vocabulary
ISO 4139:1979 Ferrosilicon – Determination of aluminium content – Flame atomic absorption spectrometric method
ISO 4140:1979 Ferrochromium and ferrosilicochromium – Determination of chromium content – Potentiometric method
ISO 4157 Construction drawings – Designation systems
ISO 4158:1978 Ferrosilicon, ferrosilicomanganese and ferrosilicochromium – Determination of silicon content – Gravimetric method
ISO 4159:1978 Ferromanganese and ferrosilicomanganese – Determination of manganese content – Potentiometric method
ISO 4165 Road vehicles — Electrical connections — Double-pole connection
ISO 4172:1991 Technical drawings – Construction drawings – Drawings for the assembly of prefabricated structures
ISO 4173:1980 Ferromolybdenum – Determination of molybdenum content – Gravimetric method
ISO 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines – Cement mortar lining
ISO 4185:1980 Measurement of liquid flow in closed conduits – Weighing method
ISO 4217:2015 Codes for the representation of currencies
ISO 4223 Definitions of some terms used in the tyre industry
ISO 4223-1:2017 Part 1: Pneumatic tyres
ISO 4223-2:1991 Part 2: Solid tyres
ISO 4225:1994 Air quality – General aspects – Vocabulary
ISO 4226:2007 Air quality – General aspects – Units of measurement
ISO 4232 Office machines – Minimum information to be included in specification sheets
ISO 4232-3:1984 Part 3: Postal franking machines
ISO 4246:1994 Cinematography – Vocabulary
ISO 4248:1978 Jig bushes – Definitions and nomenclature
ISO 4287:1997 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Terms, definitions and surface texture parameters
ISO 4288:1996 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Rules and procedures for the assessment of surface texture
ISO 4291:1985 Methods for the assessment of departure from roundness – Measurement of variations in radius
ISO 4306 Cranes – Vocabulary
ISO 4306-1:2007 Part 1: General
ISO 4306-2:2012 Part 2: Mobile cranes
ISO 4306-3:2016 Part 3: Tower cranes
ISO 4306-5:2005 Part 5: Bridge and gantry cranes
ISO 4314 Surface active agents — Determination of free alkalinity or free acidity — Titrimetric method
ISO 4337:1977 Information processing – Interchangeable magnetic twelve-disk pack (100 Mbytes)
ISO 4341:1978 Information processing – Magnetic tape cassette and cartridge labelling and file structure for information interchange
ISO 4346:1977 Steel wire ropes for general purposes – Lubricants – Basic requirements
ISO 4359:2013 Flow measurement structures – Rectangular, trapezoidal and U-shaped flumes
ISO 4360:2008 Hydrometry – Open channel flow measurement using triangular profile weirs
ISO 4362:1999 Hydrometric determinations – Flow measurement in open channels using structures – Trapezoidal broad-crested weirs
ISO 4363:2002 Measurement of liquid flow in open channels – Methods for measurement of characteristics of suspended sediment
ISO 4364:1997 Measurement of liquid flow in open channels – Bed material sampling
ISO 4365:2005 Liquid flow in open channels – Sediment in streams and canals – Determination of concentration, particle size distribution and relative density
ISO 4366:2007 Hydrometry – Echo sounders for water depth measurements
ISO 4369:1979 Measurement of liquid flow in open channels – Moving-boat method
ISO 4371:1984 Measurement of liquid flow in open channels by weirs and flumes – End depth method for estimation of flow in non-rectangular channels with a free overfall (approximate method)
ISO 4373:2008 Hydrometry – Water level measuring devices
ISO 4374:1990 Liquid flow measurement in open channels – Round-nose horizontal broad-crested weirs
ISO 4375:2014 Hydrometry – Cableway systems for stream gauging
ISO 4377:2012 Hydrometric determinations – Flow measurement in open channels using structures – Flat-V weirs
ISO 4378 Plain bearings – Terms, definitions, classification and symbols
ISO 4378-1:2017 Part 1: Design, bearing materials and their properties
ISO 4378-2:2017 Part 2: Friction and wear
ISO 4378-3:2017 Part 3: Lubrication
ISO 4378-4:2009 Part 4: Basic symbols
ISO 4378-5:2009 Part 5: Application of symbols
ISO/TR 4378-6:2012 Part 6: Abbreviated terms
ISO 4412 Hydraulic fluid power – Test code for determination of airborne noise levels
ISO 4412-1:1991 Part 1: Pumps
ISO 4412-2:1991 Part 2: Motors
ISO 4412-3:1991 Part 3: Pumps – Method using a parallelepiped microphone array
ISO 4413:2010 Hydraulic fluid power – General rules and safety requirements for systems and their components
ISO 4481:1977 Cutlery and flatware – Nomenclature
ISO 4548 Methods of test for full-flow lubricating oil filters for internal combustion engines
ISO 4548-7:2012 Part 7: Vibration fatigue test
Daftar Standar ISO 4500 – ISO 4999
ISO 4551:1987 Ferroalloys – Sampling and sieve analysis
ISO 4552 Ferroalloys – Sampling and sample preparation for chemical analysis
ISO 4552-1:1987 Part 1: Ferrochromium, ferrosilicochromium, ferrosilicon, ferrosilicomanganese, ferromanganese
ISO 4552-2:1987 Part 2: Ferrotitanium, ferromolybdenum, ferrotungsten, ferroniobium, ferrovanadium
ISO 4578 Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method
ISO 4582 Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
ISO 4587 Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
ISO 4618:2014 Paints and varnishes – Terms and definitions
ISO 4628 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance
ISO 4628-1 General introduction and designation system
ISO 4628-2 Assessment of degree of blistering
ISO 4628-3 Assessment of degree of rusting
ISO 4628-4 Assessment of degree of cracking
ISO 4628-5 Assessment of degree of flaking
ISO 4628-6 Assessment of degree of chalking by tape method
ISO 4628-7 Assessment of degree of chalking by velvet method
ISO 4628-8 Assessment of degree of delamination and corrosion around a scribe
ISO 4628-10 Assessment of degree of filiform corrosion
ISO 4683 Raw sheep skins
ISO 4683-1:1998 Part 1: Descriptions of defects
ISO 4720:2009 Essential oils – Nomenclature
ISO 4730:2017 Essential oil of Melaleuca, terpinen-4-ol type (Tea Tree oil)
ISO 4786:1977 Enclosed-scale adjustable-range thermometers
ISO 4787:2010 Laboratory glassware – Volumetric instruments – Methods for testing of capacity and for use
ISO 4788:2005 Laboratory glassware – Graduated measuring cylinders
ISO 4791 Laboratory apparatus – Vocabulary relating to apparatus made essentially from glass, porcelain or vitreous silica
ISO 4791-1:1985 Part 1: Names for items of apparatus
ISO 4795:1996 Glass for thermometer bulbs
ISO 4801:1979 Glass alcoholometers and alcohol hydrometers not incorporating a thermometer
ISO 4805:1982 Laboratory glassware – Thermo-alcoholometers and alcohol-thermohydrometers
ISO 4831:2006 Microbiology of food and animal feeding stuffs – Horizontal method for the detection and enumeration of coliforms – Most probable number technique
ISO 4832:2006 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of coliforms – Colony-count technique
ISO 4833 Microbiology of the food chain – Horizontal method for the enumeration of microorganisms
ISO 4833-1:2013 Part 1: Colony count at 30 degrees C by the pour plate technique
ISO 4833-2:2013 Part 2: Colony count at 30 degrees C by the surface plating technique
ISO 4866:2010 Mechanical vibration and shock – Vibration of fixed structures – Guidelines for the measurement of vibrations and evaluation of their effects on structures
ISO 4871:1996 Acoustics – Declaration and verification of noise emission values of machinery and equipment
ISO/IEC 4873:1991 Information technology – ISO 8-bit code for information interchange – Structure and rules for implementation
ISO 4875 Metal-cutting band saw blades
ISO 4875-1:2006 Part 1: Vocabulary
ISO 4880:1997 Burning behaviour of textiles and textile products – Vocabulary
ISO 4882:1979 Office machines and data processing equipment – Line spacings and character spacings
ISO 4885:2017 Ferrous materials – Heat treatments – Vocabulary
ISO 4892 Plastics – Methods of exposure to laboratory light sources
ISO 4902:1989 Information technology – Data communication – 37-pole DTE/DCE interface connector and contact number assignments
ISO 4903:1989 Information technology – Data communication – 15-pole DTE/DCE interface connector and contact number assignments
ISO/IEC 4909:2006 Identification cards – Financial transaction cards – Magnetic stripe data content for track 3
ISO 4921:2000 Knitting – Basic concepts – Vocabulary
Update Daftar
Untuk daftar lengkap dan terbaru dari semua standar ISO setiap saat, bisa dilihat pada katalog ISO di web resmi ISO international berikut :
https://www.iso.org/standards-catalogue/browse-by-ics.html
Demikian artikel dari standarku.com mengenai Daftar Standar ISO 3000-4999.
Mohon saran dari pembaca untuk kelengkapan isi artikel ini, silahkan saran tersebut dapat disampaikan melalui kolom komentar.
Baca artikel lain :
- Daftar Standar ISO (ISO 1-99)
- Daftar Standar ISO 100-199
- Daftar Standar ISO 200-499
- Daftar Standar ISO 500-699
- Daftar Standar ISO 700-999
- Daftar Standar ISO 1000-2999
- Daftar Standar ANSI IBR
- Daftar Standar IEC
Sumber referensi :