Daftar Standar IEEE Power and Energy 2

Daftar Standar IEEE Power and Energy 2 adalah kumpulan judul standar IEEE dengan lingkup : Power and Energy sub part 2.

Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi IEEE, yang penamaan nya diawali dengan kode “IEEE”.

IEEE SA (Standards Association) adalah organisasi pembangun konsensus terkemuka yang memelihara, mengembangkan, dan memajukan teknologi global, melalui IEEE.

Artikel ini adalah lanjutan dari artikel sebelumnya dari standarku.com mengenai organisasi IEEE SA berikut :

Jadi artikel ini ditujukan untuk membantu pembaca dalam mencari apa saja judul standar IEEE yang dibutuhkan.

Untuk mempermudah pencarian judul standar, disini kami cantumkan pembagian berdasarkan klasifikasi berikut.

Klasifikasi Standar IEEE

Standar IEEE dibagi menjadi 21 klasifikasi sebagaimana berikut :

  1. Aerospace Electronics
  2. Antennas and Propagation
  3. Batteries
  4. Blockchain
  5. Communications
  6. Computer Technology
  7. Consumer Electronics
  8. Electromagnetic Compatibility
  9. Green and Clean Technology
  10. Healthcare IT
  11. Industry Applications
  12. Instrumentation and Measurement
  13. Nanotechnology
  14. National Electrical Safety Code (NESC)
  15. Nuclear Power
  16. Power and Energy
  17. Power Electronics
  18. Smart Grid
  19. Software and Systems Engineering
  20. Transportation
  21. Wired and Wireless Communications

Dikarenakan standar IEEE sangat banyak jumlahnya, maka akan dibagi menjadi beberapa artikel seri Daftar Standar IEEE.

Pada artikel sebelumnya mencakup kategori yang pertama hingga ke 15 sebagaimana berikut :

Pada artikel kali ini mencakup kategori yang ke 16 (part 16) yakni : Power and Energy.

Kategori Power and Energy memiliki jumlah standar yang sangat banyak, oleh karena itu kami bagi lagi menjadi beberapa sub part artikel.

Artikel ini merupakan sebagian daftar judul dari kategori Power and Energy untuk sub part 2.

Kategori lain akan dilanjutkan pada artikel dari standarku.com berikutnya.

Kolaborasi Organisasi Pengembang Standar

Pada beberapa judul artikel di kategori ini ada yang merupakan hasil kolaborasi antara IEEE dengan organisasi pengembang standar lain seperti :

  • ISO (International Organization for Standardization), adalah suatu organisasi atau lembaga nirlaba internasional, yang bertujuan untuk membuat dan memperkenalkan standar dan standardisasi internasional untuk berbagai tujuan.
  • IEC, adalah organisasi standardisasi internasional yang menyusun dan menerbitkan standar-standar internasional untuk seluruh bidang elektrik, elektronik dan teknologi yang terkait atau bidang teknologi elektro (electrotechnology).
  • ANSI (American National Standards Institute), adalah organisasi nirlaba swasta yang mengawasi pengembangan standar yang disetujui secara sukarela untuk produk, layanan, proses, sistem, dan personel di Amerika Serikat.

Seperti yang ditunjukkan pada judul dengan kode awalan nama gabungan sebagaimana berikut :

  • IEEE/IEC
  • IEEE/ISO/IEC
  • IEEE/ISO
  • IEEE/ANSI
  • ANSI/AAMI
  • IEEE/AIEE

Lebih jelas mengenai organisasi pengembang standar lain diatas dapat dibaca pada artikel lain dari standarku.com berikut :

Daftar Standar IEEE

Berikut adalah judul standar-standar IEEE part 16 yang dikutip dari ieee.org per 25 Agustus 2021 :

Daftar Standar IEEE Power and Energy 2

  • IEEE C57.12.52-2012 – IEEE Standard for Sealed Dry-Type Power Transformers, 501 kVA and Higher, Three-Phase, with High-Voltage 601 to 34500 Volts, Low-Voltage 208Y/120 to 4160 Volts—General Requirements
  • IEEE C57.12.91-1979 – IEEE Standard Test Code for Dry-Type Distribution and Power Transformers
  • IEEE C57.19.00-2004 – IEEE Standard General Requirements and Test Procedure for Power Apparatus Bushings
  • IEEE C93.4-2012 – IEEE Standard for Power-Line Carrier Line-Tuning Equipment (30 kHz to 500 kHz) Associated with Power Transmission Lines
  • IEEE/AIEE 48-1962 – AIEE Standard for Potheads
  • IEEE/ANSI C37.42-1996 – American National Standard Specification for High-Voltage Expulsion Type Distribution Class Fuses, Cutouts, Fuse Disconnecting Switches and Fuse Links
  • IEEE/ANSI C37.52-1974 – American National Standard Test Procedures for Low-Voltage AC Power Circuit Protectors Used in Enclosures
  • IEEE/ANSI C57.12.20-1997 – American National Standard for Transformers – Standard for Overhead Type Distribution Transformers, 500 kVA and Smaller: High Voltage 34500 Volts and Below: Low Voltage, 7970/13800Y Volts and Below
  • IEEE/ANSI C57.12.24-1994 – American National Standard for Transformers– Underground-Type Three-Phase Distribution Transformers, 2500 kVA and Smaller, High Voltage, 34 500 GrdY/19 920 Volts and Below, Low Voltage, 480 Volts and Below – Requirements
  • IEEE/ANSI C57.12.52-1981 – American National Standard Requirements for Sealed Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts
  • IEEE/IEC 61691-5-2004 – IEC/IEEE International Standard – Behavioral Languages – Part 5: Standard VITAL ASIC (Application Specific Integrated Circuit) Modeling Specification
  • IEEE/IEC 65700-19-03-2014 – IEC/IEEE International Standard — Bushings for DC application
  • IEEE 1312-1993 – IEEE Standard Preferred Voltage Ratings for Alternating-Current Electrical Systems and Equipment Operating at Voltages Above 230 kV Nominal
  • IEEE 387-1995 – IEEE Standard Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations
  • IEEE C37.2-1991 – IEEE Standard Electrical Power System Device Function Numbers
  • IEEE C37.2-1996 – IEEE Standard Electrical Power System Device Function Numbers and Contact Designations
  • IEEE C37.20.2-1999 – IEEE Standard for Metal-Clad Switchgear
  • IEEE C57.12.80-1978 – IEEE Standard Terminology for Power and Distribution Transformers
  • IEEE C57.12.90-2015/Cor 1-2017 – IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers Corrigendum 1:Editorial and Technical Corrections
  • IEEE C57.131-1995 – IEEE Standard Requirements for Load Tap Changers
  • IEEE/IEC C37.60-2012 – IEEE/IEC International Standard – High-voltage switchgear and controlgear – Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV
  • IEEE/IEC C37.60/62271-111-2018 – IEC/IEEE International Standard – High-voltage switchgear and controlgear – Part 111: Automatic circuit reclosers for alternating current systems up to and including 38 kV
  • 1547a – IEEE Approved Draft Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces – Amendment 1 to IEEE Std 1547-2018 to provide more flexibility for adoption of abnormal operating performance Category III
  • IEEE 1547a-2020 – IEEE Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces–Amendment 1: To Provide More Flexibility for Adoption of Abnormal Operating Performance Category III
  • IEEE C62.82.1-2010 – IEEE Standard for Insulation Coordination–Definitions, Principles, and Rules
  • IEEE 117-2015 – IEEE Standard Test Procedure for Thermal Evaluation of Systems of Insulating Materials for Random-Wound AC Electric Machinery
  • IEEE 1898-2016 – IEEE Standard for High-Voltage Direct-Current (HVDC) Composite Post Insulators
  • IEEE 390-1987 – IEEE Standard for Pulse Transformers
  • IEEE 820-2005 – IEEE Standard Telephone Loop Performance Characteristics
  • IEEE C37.04-2018/Cor 1-2021 – IEEE Standard for Ratings and Requirements for AC High-Voltage Circuit Breakers with Rated Maximum Voltage Above 1000 V Corrigendum 1
  • IEEE C37.09-2018 – IEEE Standard Test Procedures for AC High-Voltage Circuit Breakers with Rated Maximum Voltage Above 1000 V
  • IEEE C37.13.1-2016 – IEEE Standard for Definite-Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage (600 V AC and Below) Power Circuit Breaker Switchgear
  • IEEE C37.23-2003 – IEEE Standard for Metal-Enclosed Bus
  • IEEE C37.23-2015 – IEEE Standard for Metal-Enclosed Bus
  • IEEE C37.30.1a-2017 – IEEE Standard Requirements for AC High-Voltage Air Switches Rated Above 1000 V — Amendment 1: Criteria for acceptance
  • IEEE C37.30.3-2018 – IEEE Standard Requirements for High-Voltage Interrupter Switches, Interrupters, or Interrupting Aids Used on or Attached to Switches Rated for Alternating Currents Above 1000 V
  • IEEE C37.30.4-2018 – IEEE Standard for Test Code for Switching and Fault Making Tests for High-Voltage Interrupter Switches, Interrupters or Interrupting Aids Used on or Attached to Switches Rated for Alternating Currents Above 1000 V
  • IEEE C57.12.20-2011 – IEEE Standard for Overhead-Type Distribution Transformers 500 kVA and Smaller: High Voltage, 34 500 V and Below; Low Voltage, 7970/13 800Y V and Below
  • IEEE C57.12.23-2009 – IEEE Standard for Submersible Single-Phase Transformers: 167 kVA and Smaller; High Voltage 25 000 V and Below; Low Voltage 600 V and Below
  • IEEE C57.131-2012 – IEEE Standard Requirements for Tap Changers
  • IEEE C57.154-2012 – IEEE Standard for the Design, Testing, and Application of Liquid-Immersed Distribution, Power, and Regulating Transformers Using High-Temperature Insulation Systems and Operating at Elevated Temperatures
  • IEEE C57.18.10-1998 – IEEE Standard Practices and Requirements for Semiconductor Power Rectifier Transformers
  • IEEE C63.10-2013 – American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices
  • IEEE 497-2002/Cor 1-2007 – IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations – Corrigendum 1: Incorporation of User Feedback through 2005
  • IEEE C57.100-1986 – IEEE Standard Test Procedure for Thermal Evaluation of Oil-Immersed Distribution Transformers
  • IEEE C57.100-1999 – IEEE Standard Test Procedure for Thermal Evaluation of Liquid-Immersed Distribution and Power Transformers
  • IEEE C57.12.01-1998 – IEEE Standard General Requirements for Dry-Type Distribution and Power Transformers Including Those with Solid Cast and/or Resin Encapsulated Windings
  • IEEE C57.12.01-2005 – Standard General Requirements for Dry-Type Distribution and Power Transformers Including Those with Solid Cast and/or Resin Encapsulated Windings
  • IEEE C57.12.23-2002 – IEEE Standard for Underground Type, Self-Cooled, Single-Phase, Distribution Transformers with Separable Insulated High-Voltage Connectors; High Voltage 25000 V and Below; Low Voltage 600 V and Below; 167 kVA and Smaller
  • IEEE C57.19.00-1991 – IEEE Standard General Requirements and Test Procedure for Outdoor Power Apparatus Bushings
  • IEEE C57.21-1981 – IEEE Standard Requirements, Terminology, and Test Code for Shunt Reactors Rated Over 500 kVA
  • IEEE C57.21-1990 – IEEE Standard Requirements, Terminology, and Test Code for Shunt Reactors Rated Over 500 kVA
  • IEEE/IEC 63113-2021 – IEC/IEEE International Standard–Nuclear facilities–Instrumentation important to safety–Spent fuel pool instrumentation
  • IEEE/IEC C57.15-2017 – IEEE/IEC International Standard- Power transformers – Part 21: Standard requirements, terminology, and test code for step-voltage regulators
  • ANSI C37.0781-1972 – ANSI American National Standard Schedule of Dielectric Test Values for Outdoor AC High-Voltage Circuit Breaker External Insulation Rated on a Symmetrical Current Basis
  • ANSI/IEEE 762-1980 – IEEE Trial use Standard Definitions for Use in Reporting Electric Generating Unit Reliability, Availability, and Productivity
  • ANSI/IEEE C37.1-1979 – American National Standard Definition, Specification, and Analysis of Manual, Automatic, and Supervisory Station Control and Data Acquisition
  • ANSI/IEEE C62.1-1981 – IEEE Standard for Surge Arresters for AC Power Circuits
  • IEEE 1-1986 – IEEE Standard General Principles for Temperature Limits in the Rating of Electric Equipment and for the Evaluation of Electrical Insulation
  • IEEE 1007-1991 – IEEE Standard Methods and Equipment for Measuring the Transmission Characteristics of Pulse-Code Modulation (PCM) Telecommunications Circuits and Systems
  • IEEE 1044-1993 – IEEE Standard Classification for Software Anomalies
  • IEEE 1232-1995 – IEEE Standard for Artificial Intelligence and Expert System Tie to Automatic Test Equipment (AI-ESTATE): Overview and Architecture
  • IEEE 1232.2-1998 – IEEE Standard for Artificial Intelligence Exchange and Service Tie to All Test Environments (AI-ESTATE): Service Specification
  • IEEE 1390.2-1999 – IEEE Standard for Utility Telemetry Service – Telemetry Interface Unit (TIU) to Telephone Network
  • IEEE 1390.3-1999 – IEEE Standard for Automatic Meter Reading via Telephone – Network to Utility Controller
  • IEEE 1566-2005 – IEEE Standard for Performance of Adjustable Speed AC Drives Rated 375 kW and Larger
  • IEEE 1566-2015 – IEEE Standard for Performance of Adjustable-Speed AC Drives Rated 375 kW and Larger
  • IEEE 1581-2011 – IEEE Standard for Static Component Interconnection Test Protocol and Architecture
  • IEEE 1855-2016 – IEEE Standard for Fuzzy Markup Language
  • IEEE 1914.3-2018 – IEEE Standard for Radio over Ethernet Encapsulations and Mappings
  • IEEE 213-1987 – IEEE Standard Procedure for Measuring Conducted Emissions in the Range of 300 kHz to 25 MHz from Television and FM Broadcast Receivers to Power Lines
  • IEEE 24-1977 – IEEE Standard Electrical, Dimensional, and Related Requirements for Outdoor Apparatus Bushings
  • IEEE 24-1984 – IEEE Standard Performance Characteristics and Dimensions for Outdoor Apparatus Bushings
  • IEEE 2420-2019 – IEEE Standard Criteria for Combustion Turbine-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations
  • IEEE 2420-2019 – IEEE Standard Criteria for Combustion Turbine-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations
  • IEEE 262B-1977 – IEEE Trial Use Standard Dielectric Test Requirements for Power Transformers for Operation on Effectively Grounded Systems 345 kV and Above
  • IEEE 308-1974 – IEEE Standard Criteria for Class IE Power Systems for Nuclear Power Generating Stations
  • IEEE 312-1977 – IEEE Standard Definitions of Terms for Communication Switching
  • IEEE 316-1971 – IEEE Standard Requirements for Direct Current Instrument Shunts
  • IEEE 32-1972 – IEEE Standard Requirements, Terminology, and Test Procedures for Neutral Grounding Devices
  • IEEE 382-2019 – IEEE Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations and Other Nuclear Facilities
  • IEEE 382-2019 – IEEE Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations and Other Nuclear Facilities
  • IEEE 404-1986 – IEEE Standard for Cable Joints for Use with Extruded Dielectric Cable Rated 5000 V through 46 000 V and Cable Joints for Use with Laminated Dielectric Cable Rated 2500 V Through 500 000 V
  • IEEE 404-1993 – IEEE Standard for Cable Joints for Use With Extruded Dielectric Cable Rated 5000-138 000 V and Cable Joints for Use With Laminated Dielectric Cable Rated 2500-500 000 V
  • IEEE 421.1-2007 – IEEE Standard Definitions for Excitation Systems for Synchronous Machines
  • IEEE 444-1973 – IEEE Standard Practices and Requirements for Thyristor Converters for Motor Drives Part 1- Converters for DC Motor Armature Supplies
  • IEEE 463-2019 – IEEE Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones
  • IEEE 463-2019 – IEEE Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones
  • IEEE 48-1975 – IEEE Standard Test Procedures and Requirements for High-Voltage Alternating-Current Cable Terminations
  • IEEE 535-1979 – IEEE Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations
  • IEEE 535-1986 – IEEE Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations
  • IEEE 535-2006 – IEEE Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations
  • IEEE 592-2007 – IEEE Standard for Exposed Semiconducting Shields on High-Voltage Cable Joints and Separable Connectors
  • IEEE 592-2018 – IEEE Standard for Insulation Shields on Medium-Voltage (15 kV – 35 kV) Cable Joints and Separable Connectors
  • IEEE 61158-2017 – IEEE Standard for Industrial Hard Real-Time Communication
  • IEEE 627-2019 – IEEE Standard for Qualification of Equipment Used in Nuclear Facilities
  • IEEE 627-2019 – IEEE Standard for Qualification of Equipment Used in Nuclear Facilities
  • IEEE 628-2011 – IEEE Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations
  • IEEE 628-2020 – IEEE Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations
  • IEEE 738-2006 – IEEE Standard for Calculating the Current-Temperature of Bare Overhead Conductors
  • IEEE 762-2006 – IEEE Standard Definitions for Use in Reporting Electric Generating Unit Reliability, Availability, and Productivity
  • IEEE 810-2015 – IEEE Standard for Hydraulic Turbine and Generator Shaft Couplings and Shaft Runout Tolerances
  • IEEE 817-1993 – IEEE Standard Test Procedure for Flame-Retardant Coatings Applied to Insulated Cables in Cable Trays
  • IEEE 82-2002 – IEEE Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors
  • IEEE 824-2005 – IEEE Standard for Series Capacitor Banks in Power Systems
  • IEEE 837-2002 – IEEE Standard for Qualifying Permanent Connections Used in Substation Grounding
  • IEEE 837-2014 – IEEE Standard for Qualifying Permanent Connections Used in Substation Grounding
  • IEEE 841-1994 – IEEE Standard for Petroleum and Chemical Industry – Severe Duty Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors – Up to and Including 500 hp
  • IEEE 859-2018 – IEEE Standard Terms for Reporting and Analyzing Outage Occurrences and Outage States of Electrical Transmission Facilities
  • IEEE C37.013-1989 – IEEE Standard for AC High-Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.017-2010 – IEEE Standard for Bushings for High-Voltage [over 1000 V (ac)] Circuit Breakers and Gas-Insulated Switchgear
  • IEEE C37.04b-2008 – IEEE Standard for Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Amendment 2: To Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100
  • IEEE C37.04f-1990 – Supplement to IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.04h-1990 – Supplement to IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.105-1987 – IEEE Standard for Qualifying Class 1E Protective Relays and Auxiliaries for Nuclear Power Generating Stations
  • IEEE C37.20.2-1987 – IEEE/ANSI Standard for Metal-Clad and Station-Type Cubicle Switchgear
  • IEEE C37.59-2018 – IEEE Standard for Requirements for Conversion of Power Switchgear Equipment
  • IEEE C37.90-1989 – IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus
  • IEEE C57.12.00-1987 – IEEE Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
  • IEEE C57.12.00-1993 – IEEE Standard General Requirements for Liquid-Immersed Distribution, Power and Regulating Transformers
  • IEEE C57.12.14-1982 – IEEE Trial-Use Standard for Dielectric Test Requirements for Power Transformers for Operation at System Voltages from 115 kV Through 230 kV
  • IEEE C57.12.24-2009 – IEEE Standard for Submersible, Three-Phase Transformers, 3750 kVA and Smaller: High Voltage, 34 500 GrdY/19 920 Volts and Below; Low Voltage, 600 Volts and Below
  • IEEE C57.12.26-1992 – IEEE Standard for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers for Use with Separable Insulated High-Voltage Connectors (34 500 GrdY/19 920 Volts and Below, 2500 kVA and Smaller)
  • IEEE C57.12.35-2007 – IEEE Standard for Bar Coding for Distribution Transformers and Step-Voltage Regulators
  • IEEE C57.12.35-2013 – IEEE Standard Bar Coding for Distribution Transformers and Step-Voltage Regulators
  • IEEE C57.12.36-2017 – IEEE Standard Requirements for Liquid-Immersed Distribution Substation Transformers
  • IEEE C57.12.44-2005 – IEEE Standard Requirements for Secondary Network Protectors
  • IEEE C57.12.44-2014 – IEEE Standard Requirements for Secondary Network Protectors
  • IEEE C57.12.51-2008 – IEEE Standard for Ventilated Dry- Type Power Transformers, 501 kVA and Larger, Three-Phase, with High- Voltage 601 V to 34 500 V; Low- Voltage 208Y/120 V to 4160 V- General Requirements
  • IEEE C57.12.60-2009/Cor 1-2013 – IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Dry-Type Power and Distribution Transformers, Including Open-Wound, Solid-Cast, and Resin-Encapsulated Transformers
  • IEEE C57.12.90-1987 – IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers and IEEE Guide for Short-Circuit Testing of Distribution and Power Transformers
  • IEEE C57.12.90-1993 – IEEE Standard Test Code for Liquid-Immersed Distribution, Power and Regulating Transformers and IEEE Guide for Short-Circuit Testing of Distribution and Power Transformers
  • IEEE C57.12.91-1995 – IEEE Standard Test Code for Dry-Type Distribution and Power Transformers
  • IEEE C57.12.91-2001 – IEEE Standard Test Code for Dry-Type Distribution and Power Transformers
  • IEEE C57.129-2007 – IEEE Standard for General Requirements and Test Code for Oil-Immersed HVDC Converter Transformers
  • IEEE C57.15-1986 – IEEE Standard Requirements, Terminology, and Test Code for Step-Voltage and Induction-Voltage Regulators
  • IEEE C57.18.10a-2008 – IEEE Standard for Practices and Requirements for Semiconductor Power Rectifier Transformers Amendment 1: Added Technical and Editorial Corrections
  • IEEE C57.19.01-1991 – IEEE Standard Performance Characteristics and Dimensions for Outdoor Apparatus Bushings
  • IEEE C57.19.04-2018 – IEEE Standard for Performance Characteristics and Dimensions for High Current Power Transformer Bushings with Rated Continuous Current in Excess of 5000 A in Bus Enclosures
  • IEEE C57.21-2008 – IEEE Standard Requirements, Terminology, and Test Code for Shunt Reactors Rated Over 500 kVA
  • IEEE C57.21-2021 – IEEE Approved Draft Standard Requirements, Terminology, and Test Code for Shunt Reactors Rated Over 500 kVA
  • IEEE/ANSI 262-1973 – American National Standard Test Code for Distribution, Power, and Regulating Transformers
  • IEEE/ANSI 342-1973 – American National Standard Application Guide for Capacitance Current Switching for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE/ANSI C37.85-1989 – American National Standard for Switchgear-Alternating-Current High-Voltage Power Vacuum Interrupters-Safety Requirements for X-Radiation Limits
  • IEEE/ANSI C57.12.22-1995 – American National Standard for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers With High-Voltage Bushings, 2500 kVA and Smaller; High Voltage, 34 500 GrdY/19 920 Volts and Below; Low Voltage, 480 Volts and Below
  • IEEE/ANSI C93.1-1999 – American National Standard Requirements for Power-Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers (CCVT
  • IEEE/ANSI C93.5-1997 – American National Standard Requirements for Single Function Power-Line Carrier Transmitter/Receiver Equipment
  • IEEE/ASA C37.11-1957 – ASA American National Standard Requirements for Power Circuit Breaker Control
  • IEEE/IEC 60076-57-129-2017 – IEC/IEEE International Standard – Power transformers–Part 57-129: Transformers for HVDC applications
  • IEEE 1815.1-2015/Cor 1-2016 – IEEE Approved Draft Standard for Exchanging Information between Networks Implementing IEC 61850 and IEEE Std 1815(TM) (Distributed Network Protocol – DNP3) – Corrigendum 1
  • IEEE 334-1994 – IEEE Standard for Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating Stations
  • IEEE 421.3-1997 – IEEE Standard for High-Potential Test Requirements for Excitation Systems for Synchronous Machines
  • IEEE 449-1998 – IEEE Standard for Ferroresonant Voltage Regulators
  • IEEE C37.30.1-2011 – IEEE Standard Requirements for AC High-Voltage Air Switches Rated Above 1000 V
  • IEEE C57.15-1999 – IEEE Standard Requirements, Terminology, and Test Code for Step-Voltage Regulators
  • IEEE C62.62-2018 – IEEE Standard Test Specifications for Surge-Protective Devices (SPDs) for Use on the Load Side of the Service Equipment in Low-Voltage (1000 V and Less) AC Power Circuits
  • IEEE 1547.1-2020 – IEEE Standard Conformance Test Procedures for Equipment Interconnecting Distributed Energy Resources with Electric Power Systems and Associated Interfaces
  • IEEE 2030.8-2018 – IEEE Standard for the Testing of Microgrid Controllers
  • IEEE 281-1984 – IEEE Standard Service Conditions for Power System Communication Equipment
  • IEEE 993-1990 – IEEE Trial-Use Standard for Test Equipment Description Language (TEDL)
  • IEEE 1076.6-2004 – IEEE Standard for VHDL Register Transfer Level (RTL) Synthesis
  • IEEE 810-1987 – IEEE Standard for Hydraulic Turbine and Generator Integrally Forged Shaft Couplings and Shaft Runout Tolerances
  • IEEE 835a-2012 – IEEE Standard Power Cable Ampacity Tables Amendment 1: Revision to Introduction
  • IEEE C37.04-2018 – IEEE Standard for Ratings and Requirements for AC High-Voltage Circuit Breakers with Rated Maximum Voltage Above 1000 V
  • IEEE C37.04-2018 – IEEE Standard for Ratings and Requirements for AC High-Voltage Circuit Breakers with Rated Maximum Voltage Above 1000 V
  • IEEE C37.09b-2010 – IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis — Amendment 2: To Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100
  • IEEE C37.16-2009 – IEEE Standard for Preferred Ratings,Related Requirements, and Application Recommendations for Low-Voltage AC (635 V and below)and DC (3200 V and below) Power Circuit Breakers
  • IEEE C37.20.1-2002 – IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear
  • IEEE C37.20.1-2015 – IEEE Standard for Metal-Enclosed Low-Voltage (1000 Vac and below, 3200 Vdc and below) Power Circuit Breaker Switchgear
  • IEEE C37.20.3-2013 – IEEE Standard for Metal-Enclosed Interrupter Switchgear (1 kV–38 kV)
  • IEEE C37.20.9-2019 – IEEE Standard for Metal-Enclosed Switchgear Rated 1 kV to 52 kV Incorporating Gas Insulating Systems
  • IEEE C37.21-2017 – IEEE Standard for Control Switchboards
  • IEEE C37.301-2009 – IEEE Standard for High-Voltage Switchgear (Above 1000 V) Test Techniques–Partial Discharge Measurements
  • IEEE C37.43-2008 – IEEE Standard Specifications for High-Voltage Expulsion, Current-Limiting, and Combination-Type Distribution and Power Class External Fuses, with Rated Voltages from 1 kV through 38 kV, Used for the Protection of Shunt Capacitors
  • IEEE C37.59-2007 – IEEE Standard Requirements for Conversion of Power Switchgear Equipment
  • IEEE C37.74-2014 – IEEE Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up to 38 kV
  • IEEE C57.12.01-2020 – IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers
  • IEEE C57.12.29-2005 – IEEE Standard for Pad Mounted Equipment – Enclosure Integrity for Coastal Environments
  • IEEE C57.12.32-2019 – IEEE Standard for Submersible Equipment–Enclosure Integrity
  • IEEE C57.12.32-2019 – IEEE Standard for Submersible Equipment–Enclosure Integrity
  • IEEE C57.148-2020 – IEEE Standard for Control Cabinets for Power Transformers
  • IEEE C57.32-2015 – IEEE Standard for Requirements, Terminology, and Test Procedures for Neutral Grounding Devices
  • IEEE C62.34-2017 – IEEE Standard for Test Methods and Performance of Low-Voltage (1000 V rms or Less) Surge Protective Devices Used on Secondary Distribution Systems (Between the Transformer Low-Voltage Terminals and the Line Side of the Service Equipment)
  • IEEE/IEC 62271-37-082-2012 – High-voltage switchgear and controlgear -Part 37-082: Standard practice for the measurement of sound pressure levels on alternating current circuit-breakers
  • N42.43-2016 – American National Standard Performance Criteria for Mobile and Transportable Radiation Monitors Used for Homeland Security
  • IEEE 1202-2006 – IEEE Standard for Flame-Propagation Testing of Wire & Cable
  • IEEE 1202-2006/Cor 1-2012 – IEEE Standard for Flame-Propagation Testing of Wire and Cable – Corrigendum 1
  • IEEE 1717-2012 – IEEE Standard for Testing Circuit Integrity Cables Using a Hydrocarbon Pool Fire Test Protocol
  • IEEE 386-2006 – IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems above 600 V
  • IEEE 386-2016 – IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems Rated 2.5 kV through 35 kV
  • IEEE 393-1991 – IEEE Standard for Test Procedures for Magnetic Cores
  • IEEE 463-2006 – IEEE Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones
  • IEEE 463-2013 – IEEE Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones
  • IEEE C37.082-1982 – IEEE Standard Methods for the Measurement of Sound Pressure Levels of AC Power Circuit Breakers
  • IEEE C37.21a-2020 – IEEE Standard for Control Switchboards–Amendment 1: Control and Secondary Circuits and Devices, and All Wiring
  • IEEE C37.21a-2020 – IEEE Standard for Control Switchboards–Amendment 1: Control and Secondary Circuits and Devices, and All Wiring
  • IEEE C37.41-2008 – IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices
  • IEEE C37.41-2016 – IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses and Accessories
  • IEEE C37.41-2016/Cor 1-2017 – IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses and Accessories Corrigenda 1
  • IEEE C57.12.60-2009 – IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Dry-Type Power and Distribution Transformers, Including Open-Wound, Solid-Cast, and Resin-Encapsulated Transformers
  • IEEE C57.12.60-2020 – IEEE Standard for Thermal Evaluation of Insulation Systems for Dry-Type Power and Distribution Transformers
  • IEEE C57.19.01-2000 – IEEE Standard Performance Characteristics and Dimensions for Outdoor Apparatus Bushings
  • IEEE C62.34-1996 – IEEE Standard for Performance of Low-Voltage Surge-Protective Devices (Secondary Arresters)
  • IEEE/IEC 60214-2-2019 – IEEE/IEC International Standard for TAP-changers –Part 2: Application guidelines
  • IEEE/IEC 60214-2-2019 – IEEE/IEC International Standard for TAP-changers –Part 2: Application guidelines
  • IEEE 97-1969 – IEEE Recommended Practice for Specifying Service Conditions in Electrical Standards
  • AIEE 15-1959 – AIEE American Standard for Industrial Control Apparatus
  • ANSI/IEEE 28-1974 – ANSI/IEEE Standard for Surge Arresters for Alternating Current Power Circuits
  • IEEE 1005-1991 – IEEE Standard Definitions and Characterization of Floating Gate Semiconductor Arrays
  • IEEE 11-1980 – IEEE Standard for Rotating Electric Machinery for Rail and Road Vehicles
  • IEEE 11-2000 – IEEE Standard for Rotating Electric Machinery for Rail and Road Vehicles
  • IEEE 111-2000 – IEEE Standard for Wide-Band (Greater Than 1 Decade) Transformers
  • IEEE 114-2010 – IEEE Standard Test Procedure for Single-Phase Induction Motors
  • IEEE 115A-1987 – IEEE Standard Procedures for Obtaining Synchronous Machine Parameters by Standstill Frequency Response Testing
  • IEEE 1180-1990 – IEEE Standard Specifications for the Implementations of 8×8 Inverse Discrete Cosine Transform
  • IEEE 1210-1996 – IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable
  • IEEE 1226.1-1993 – IEEE ABBET(TM) Trial-Use Standard for Common Ada Packages for A Broad-Based Environment for Test (ABBET(TM))
  • IEEE 1232.1-1997 – IEEE Standard for Artificial Intelligence Exchange and Service Tie to All Test Environments (AI-ESTATE): Data and Knowledge Specification
  • IEEE 1247-1998 – IEEE Standard for Interrupter Switches for Alternating Current, Rated Above 1,000 Volts
  • IEEE 1459-2000 – IEEE Standard Definitions for the Measurement of Electric Power Quantities under Sinusoidal, Non-Sinusoidal, Balanced, or Unbalanced Conditions
  • IEEE 1553-2002 – IEEE Standard for Voltage Endurance Testing of Form-Wound Coils and Bars for Hydrogenerators
  • IEEE 1591.2-2017 – IEEE Standard for Testing and Performance of Hardware for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable
  • IEEE 1594-2020 – IEEE Standard for Helically-Applied Fiber Optic Cable Systems (WRAP) for Use on Overhead Utility Lines

Disclaimer : jika ada perbedaan antara daftar nama di artikel ini dengan artikel asli dari ieee.org, maka pembaca harus mengikuti artikel asli dari ieee.org tersebut.

Demikian artikel dari standarku.com mengenai Daftar Standar IEEE part 16 Power and Energy sub part 2.

Mohon saran dari pembaca untuk kelengkapan isi artikel ini, silahkan saran tersebut dapat disampaikan melalui kolom komentar.

Baca artikel lain :

Sumber referensi :

Related Posts:

  • Daftar Standar ISO 30000-39999 Daftar Standar ISO 30000-39999 adalah kumpulan judul dari Standar nomor ISO 30000 hingga ISO 39999 yang diterbitkan oleh badan ISO Internasional. Mengenai Standar ISO ISO (International Organization for Standardization) adalah…
  • Daftar Standar IEEE Power and Energy 6 Daftar Standar IEEE Power and Energy 6 adalah kumpulan judul standar IEEE dengan lingkup : Power and Energy sub part 6. Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi…
  • Mengenal standar ANSI ANSI (American National Standards Institute) adalah organisasi nirlaba swasta yang mengawasi pengembangan standar yang disetujui secara sukarela untuk produk, layanan, proses, sistem, dan personel di Amerika Serikat. Tujuan Standar ANSI…
  • Daftar Standar Gratis SDO IBR Daftar Standar Gratis SDO IBR adalah kumpulan judul standar dari organisasi pengembangan standar untuk dibaca secara gratis, hasil kerjasama dengan ANSI IBR. Definisi SDO IBR Artikel ini merupakan lanjutan dari…
  • Daftar Standar IEEE part 1-5 Daftar Standar IEEE part 1-5 adalah kumpulan judul standar IEEE dengan lingkup : Aerospace Electronics, Antennas and Propagation, Batteries, Blockchain, Communications. Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi…
  • ISO IEC 11801-1:2017 Klausa 3.1.7 - 3.1.87 ISO IEC 11801-1:2017 Klausa 3.1.7 - 3.1.87 adalah Standar Internasional mengenai Teknologi Informasi, khususnya tentang persyaratan umum pada Generic cabling for customer premises. Artikel ini merupakan lanjutan dari artikel sebelumnya…
  • Daftar Standar ISO 8600-8999 Daftar Standar ISO 8600-8999 adalah kumpulan judul dari Standar nomor ISO 8600 hingga ISO 8999 yang diterbitkan oleh badan ISO Internasional. Mengenai Standar ISO ISO (International Organization for Standardization) adalah…
  • ISO IEC IEEE 15939 software engineering measurement ISO IEC IEEE 15939 adalah Standar Internasional mengenai Measurement process (Proses pengukuran) pada Systems and software engineering (Rekayasa sistem dan perangkat lunak). Standar versi terbaru yang masih berlaku adalah terbitan…
  • ISO IEC IEEE 15026-4 software assurance life cycle ISO IEC IEEE 15026-4 adalah Standar Internasional mengenai systems and software engineering atau sistem dan rekayasa perangkat lunak, khususnya tentang systems and software assurance part 4: Assurance in the life…
  • ISO IEC IEEE 42010 systems software engineering ISO IEC IEEE 42010 adalah Standar Internasional mengenai deskripsi arsitektur dalam sistem dan rekayasa perangkat lunak. Standar versi terbaru yang masih berlaku adalah terbitan tahun 2011 dengan judul berikut :…
  • Daftar Standar IEEE Power and Energy 1 Daftar Standar IEEE Power and Energy 1 adalah kumpulan judul standar IEEE dengan lingkup : Power and Energy sub part 1. Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi…
  • Standar Seri ISO/IEC 29110 Standar Seri ISO/IEC 29110 adalah pengembangan spesifik untuk Systems and Software Life Cycle Profiles and Guidelines for Very Small Entities (VSE). Artikel ini adalah lanjutan dari artikel sebelumnya mengenai Standar…
  • Standar ISO 90003 Software engineering Pengertian Standar ISO 90003 ISO 90003 adalah standar internasional mengenai panduan suatu organisasi untuk menerapkan ISO 9001 pada rekayasa perangkat lunak (software) di komputer. Rekayasa tersebut meliputi kegiatan : penerimaan,…
  • Daftar Standar IEEE Computer Technology Daftar Standar IEEE Computer Technology adalah kumpulan sebagian judul standar IEEE yang diterbitkan oleh organisasi IEEE SA (Standards Association). Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi IEEE, yang…
  • Daftar Standar IEEE part 12-14 Daftar Standar IEEE part 12-14 adalah kumpulan judul standar IEEE dengan lingkup : Instrumentation and Measurement, Nanotechnology, National Electrical Safety Code (NESC). Standar IEEE merupakan suatu standar yang diterbitkan oleh…

Leave a Comment