Daftar Standar IEEE Power and Energy 7

Daftar Standar IEEE Power and Energy 7 adalah kumpulan judul standar IEEE dengan lingkup : Power and Energy sub part 7.

Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi IEEE, yang penamaan nya diawali dengan kode “IEEE”.

IEEE SA (Standards Association) adalah organisasi pembangun konsensus terkemuka yang memelihara, mengembangkan, dan memajukan teknologi global, melalui IEEE.

Artikel ini adalah lanjutan dari artikel sebelumnya dari standarku.com mengenai organisasi IEEE SA berikut :

Jadi artikel ini ditujukan untuk membantu pembaca dalam mencari apa saja judul standar IEEE yang dibutuhkan.

Untuk mempermudah pencarian judul standar, disini kami cantumkan pembagian berdasarkan klasifikasi berikut.

Klasifikasi Standar IEEE

Standar IEEE dibagi menjadi 21 klasifikasi sebagaimana berikut :

  1. Aerospace Electronics
  2. Antennas and Propagation
  3. Batteries
  4. Blockchain
  5. Communications
  6. Computer Technology
  7. Consumer Electronics
  8. Electromagnetic Compatibility
  9. Green and Clean Technology
  10. Healthcare IT
  11. Industry Applications
  12. Instrumentation and Measurement
  13. Nanotechnology
  14. National Electrical Safety Code (NESC)
  15. Nuclear Power
  16. Power and Energy
  17. Power Electronics
  18. Smart Grid
  19. Software and Systems Engineering
  20. Transportation
  21. Wired and Wireless Communications

Dikarenakan standar IEEE sangat banyak jumlahnya, maka akan dibagi menjadi beberapa artikel seri Daftar Standar IEEE.

Pada artikel sebelumnya mencakup kategori yang pertama hingga ke 15 sebagaimana berikut :

Pada artikel kali ini mencakup kategori yang ke 16 (part 16) yakni : Power and Energy.

Kategori Power and Energy memiliki jumlah standar yang sangat banyak, oleh karena itu kami bagi lagi menjadi beberapa sub part artikel.

Artikel ini merupakan sebagian daftar judul dari kategori Power and Energy untuk sub part 7.

Kategori lain akan dilanjutkan pada artikel dari standarku.com berikutnya.

Kolaborasi Organisasi Pengembang Standar

Pada beberapa judul artikel di kategori ini ada yang merupakan hasil kolaborasi antara IEEE dengan organisasi pengembang standar lain seperti :

  • ISO (International Organization for Standardization), adalah suatu organisasi atau lembaga nirlaba internasional, yang bertujuan untuk membuat dan memperkenalkan standar dan standardisasi internasional untuk berbagai tujuan.
  • IEC, adalah organisasi standardisasi internasional yang menyusun dan menerbitkan standar-standar internasional untuk seluruh bidang elektrik, elektronik dan teknologi yang terkait atau bidang teknologi elektro (electrotechnology).
  • ANSI (American National Standards Institute), adalah organisasi nirlaba swasta yang mengawasi pengembangan standar yang disetujui secara sukarela untuk produk, layanan, proses, sistem, dan personel di Amerika Serikat.

Seperti yang ditunjukkan pada judul dengan kode awalan nama gabungan sebagaimana berikut :

  • IEEE/IEC
  • IEEE/ISO/IEC
  • IEEE/ISO
  • IEEE/ANSI
  • ANSI/AAMI
  • IEEE/AIEE

Lebih jelas mengenai organisasi pengembang standar lain diatas dapat dibaca pada artikel lain dari standarku.com berikut :

Daftar Standar IEEE

Berikut adalah judul standar-standar IEEE part 16 yang dikutip dari ieee.org per 25 Agustus 2021 :

Daftar Standar IEEE Power and Energy 7

  • IEEE 691-2001 – IEEE Guide for Transmission Structure Foundation Design and Testing
  • IEEE 693-1984 – IEEE Recommended Practices for Seismic Design of Substations
  • IEEE 693-2005 – IEEE Recommended Practice for Seismic Design of Substations
  • IEEE 693-2018 – IEEE Recommended Practice for Seismic Design of Substations
  • IEEE 693-2018 – IEEE Recommended Practice for Seismic Design of Substations
  • IEEE 751-1991 – IEEE Trial-Use Design Guide for Wood Transmission Structures
  • IEEE 77-1965 – IEEE Recommended Practice for Electric Installations on Textile Machinery
  • IEEE 771-1984 – IEEE Guide to the Use of ATLAS
  • IEEE 775-1993 – IEEE Guide for Designing Multistress Aging Tests of Electrical Insulation in a Radiation Environment
  • IEEE 776-1987 – IEEE Guide for Inductive Coordination of Electric Supply and Communication Lines
  • IEEE 792-1988 – IEEE Trial-Use Recommended Practice for the Evaluation of the Impulse Voltage Capability of Insulation Systems for AC Electric Machinery Employing Form-Wound Stator Coils
  • IEEE 799-1987 – IEEE Guide for Handling and Disposal of Transformer Grade Insulating Liquids Containing PCBs
  • IEEE 80-1986 – IEEE Guide for Safety in AC Substation Grounding
  • IEEE 802-1955 – AIEE Proposed Trail Use Test Code DIRECT — CURRENT CARBON — PILE VOLTAGE REGULATORS for AIRCRAFT
  • IEEE 803.1-1992 – IEEE Recommended Practice for Unique Identification in Power Plants and Related Facilities–Component Function Identifiers
  • IEEE 803A-1983 – IEEE Recommended Practice for the Unique Identification in Power Plants and Related Facilities – Component Function Identifiers
  • IEEE 806-1986 – IEEE Recommended Practice for System Identification in Fossil-Fueled Power Plants and Related Facilities
  • IEEE 807-2011 – IEEE Recommended Practice for Unique Identification in Hydroelectric Facilities
  • IEEE 833-2005 – Recommended Practice for the Protection of Electric Equipment in Nuclear Power Generating Stations from Water Hazards
  • IEEE 844-1991 – IEEE Recommended Practice for Electrical Impedance, Induction, and Skin Effect Heating of Pipelines and Vessels
  • IEEE 845-1999 – IEEE Guide for the Evaluation of Human-System Performance in Nuclear Power Generating Stations
  • IEEE 85-1973 – IEEE Test Procedure for Airborne Sound Measurements on Rotating Electric Machinery
  • IEEE 853-1985 – IEEE Recommended Practice for Voltage-Endurance Testing of Enameled Wire
  • IEEE 857-1990 – IEEE Guide for Test Procedures for HVDC Thyristor Valves
  • IEEE 857-1996 – IEEE Recommended Practice for Test Procedures for High-Voltage Direct-Current Thyristor Valves
  • IEEE 929-2000 – IEEE Recommended Practice for Utility Interface of Photovoltaic (PV) Systems
  • IEEE 930-1987 – IEEE Guide for the Statistical Analysis of Electrical Insulation Voltage Endurance Data
  • IEEE 930-2004 – (Replaced) IEEE Guide for the Statistical Analysis of Electrical Insulation Breakdown Data
  • IEEE 935-1989 – IEEE Guide on Terminology for Tools and Equipment to Be Used in Live Line Working
  • IEEE 936-1987 – IEEE Guide for Self-Commutated Converters
  • IEEE 946-1985 – IEEE Recommended Practice for the Design of Safety-Related DC Auxiliary Power Systems for Nuclear Power Generating Stations
  • IEEE 946-2004 – IEEE Recommended Practice for the Design of DC Auxiliary Power Systems for Generating Systems
  • IEEE 946-2020 – IEEE Recommended Practice for the Design of DC Power Systems for Stationary Applications
  • IEEE 95-1977 – IEEE Recommended Practice for Insulation Testing of Large AC Rotating Machinery with High Direct Voltage
  • IEEE 95-2002 – IEEE Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) With High Direct Voltage
  • IEEE 95-2002 – IEEE Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) With High Direct Voltage
  • IEEE 951-1988 – IEEE Guide to the Assembly and Erection of Metal Transmission Structures
  • IEEE 951-1996 – IEEE Guide to the Assembly and Erection of Metal Transmission Structures
  • IEEE 957-1995 – IEEE Guide for Cleaning Insulators
  • IEEE 957-2005 – IEEE Guide for Cleaning Insulators
  • IEEE 958-2003 – IEEE Guide for Application of AC Adjustable-Speed Drives on 2400 to 13,800 Volt Auxiliary Systems in Electric Power Generating Stations
  • IEEE 977-1991 – IEEE Guide to Installation of Foundations for Transmission Line Structures
  • IEEE 977-2010 – IEEE Guide to Installation of Foundations for Transmission Line Structures
  • IEEE 978-1984 – IEEE Guide for In-Service Maintenance and Electrical Testing of Live-Line Tools
  • IEEE 979-1994 – IEEE Guide for Substation Fire Protection
  • IEEE 979-2012 – IEEE Guide for Substation Fire Protection
  • IEEE 980-1987 – IEEE Guide for Containment and Control of Oil Spills in Substations
  • IEEE 980-1994 – IEEE Guide for Containment and Control of Oil Spills in Substations
  • IEEE 980-2013 – IEEE Guide for Containment and Control of Oil Spills in Substations
  • IEEE 987-1985 – IEEE Guide for Application of Composite Insulators
  • IEEE 987-2001 – IEEE Guide for Application of Composite Insulators
  • IEEE 99-1980 – IEEE Recommended Practice for the Preparation of Test Procedures for the Thermal Evaluation of Insulation Systems for Electric Equipment
  • IEEE 998-1996 – IEEE Guide for Direct Lightning Stroke Shielding of Substations
  • IEEE 998-2012 – IEEE Guide for Direct Lightning Stroke Shielding of Substations
  • IEEE C2-2017 – 2017 National Electrical Safety Code(R) (NESC(R))
  • IEEE C37.010-1979 – IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.010-1999 – IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.010-2016 – IEEE Application Guide for AC High-Voltage Circuit Breakers > 1000 Vac Rated on a Symmetrical Current Basis
  • IEEE C37.010e-1985 – Supplement to IEEE C37.010-1979: IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.011-1979 – IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.012-1979 – IEEE Application Guide for Capacitance Current Switching for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.012-2005 – IEEE Application Guide for Capacitance Current Switching for AC High-Voltage Circuit Breakers
  • IEEE C37.012-2014 – IEEE Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers Above 1000 V
  • IEEE C37.012-2014/Cor 1-2016 – IEEE Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers above 1000 V – Corrigendum 1
  • IEEE C37.012a-2020 – IEEE Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers Above 1000 V Amendment 1
  • IEEE C37.015-1993 – IEEE Application Guide for Shunt Reactor Switching
  • IEEE C37.015-2009 – IEEE Guide for the Application of Shunt Reactor Switching
  • IEEE C37.015-2017 – IEEE Guide for the Application of Shunt Reactor Switching
  • IEEE C37.06.1-2017 – IEEE Recommended Practice for Preferred Ratings for High-Voltage(>1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times
  • IEEE C37.081a-1997 – Supplement to IEEE Guide for Synthetic Fault Testing of AC High Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.083-1999 – IEEE Guide for Synthetic Capacitive Current Switching Tests of AC High-Voltage Circuit Breakers
  • IEEE C37.10-1995 – IEEE Guide for Diagnostics and Failure Investigation of Power Circuit Breakers
  • IEEE C37.10-2011 – IEEE Guide for Investigation, Analysis, and Reporting of Power Circuit Breaker Failures
  • IEEE C37.10.1-2018 – IEEE Guide for the Selection of Monitoring for Circuit Breakers
  • IEEE C37.101-1985 – IEEE Guide for Generator Ground Protection
  • IEEE C37.101-1993 – IEEE Guide for Generator Ground Protection
  • IEEE C37.102-1987 – IEEE Guide for AC Generator Protection
  • IEEE C37.102-1995 – IEEE Guide for AC Generator Protection
  • IEEE C37.103-2004 – IEEE Guide for Differential and Polarizing Relay Circuit Testing
  • IEEE C37.103-2015 – IEEE Guide for Differential and Polarizing Relay Circuit Testing
  • IEEE C37.106-1987 – IEEE Guide for Abnormal Frequency Protection for Power Generating Plants
  • IEEE C37.108-1989 – IEEE Guide for the Protection of Network Transformers
  • IEEE C37.108-2002 – IEEE Guide for the Protection of Network Transformers
  • IEEE C37.108-2021 – IEEE Guide for Protection of Secondary Network Systems
  • IEEE C37.109-2006 – IEEE Guide for the Protection of Shunt Reactors
  • IEEE C37.110-1996 – IEEE Guide for the Application of Current Transformers Used for Protective Relaying Purposes
  • IEEE C37.110-2007 – IEEE Guide for the Application of Current Transformers Used for Protective Relaying Purposes
  • IEEE C37.110-2007/Cor 1-2010 – IEEE Guide for the Application of Current Transformers Used for Protective Relaying Purposes Corrigendum 1: Corrections to Equation 18 and Equation 19
  • IEEE C37.113-1999 – IEEE Guide for Protective Relay Applications to Transmission Lines
  • IEEE C37.113-2015 – IEEE Guide for Protective Relay Applications to Transmission Lines
  • IEEE C37.116-2018 – IEEE Guide for Protective Relay Application to Transmission-Line Series Capacitor Banks
  • IEEE C37.119-2005 – IEEE Guide for Breaker Failure Protection of Power Circuit Breakers
  • IEEE C37.119-2016 – IEEE Guide for Breaker Failure Protection of Power Circuit Breakers
  • IEEE C37.12-2008 – IEEE Guide for Specifications of High-Voltage Circuit Breakers (over 1000 Volts)
  • IEEE C37.12-2018 – IEEE Guide for Specifications of High-Voltage Circuit Breakers (over 1000 V)
  • IEEE C37.12.1-2007 – IEEE Guide for High-Voltage (>1000 V)Circuit Breaker Instruction Manual Content
  • IEEE C37.122.1-2014 – IEEE Guide for Gas-Insulated Substations Rated Above 52 kV
  • IEEE C37.122.2-2011 – IEEE Guide for the Application of Gas-Insulated Substations 1 kV to 52 kV
  • IEEE C37.122.3-2011 – IEEE Guide for Sulphur Hexafluoride (SF6) Gas Handling for High-Voltage (over 1000 Vac) Equipment
  • IEEE C37.122.3-2011 – IEEE Guide for Sulphur Hexafluoride (SF6) Gas Handling for High-Voltage (over 1000 Vac) Equipment
  • IEEE C37.122.4-2016 – IEEE Guide for Application and User Guide for Gas-Insulated Transmission Lines, Rated 72.5 kV and Above
  • IEEE C37.122.5-2013 – IEEE Guide for Moisture Measurement and Control in SF6 Gas-Insulated Equipment
  • IEEE C37.122.6-2013 – IEEE Recommended Practice for the Interface of New Gas-Insulated Equipment in Existing Gas-Insulated Substations Rated above 52 kV
  • IEEE C37.122.7-2021 – IEEE Guide for Field Testing of Gas-Insulated Substations Rated Above 52 kV
  • IEEE C37.123-1991 – IEEE Guide to Specifications for Gas-Insulated Substation Equipment
  • IEEE C37.123-2016 – IEEE Guide for Specifications for High-Voltage Gas-Insulated Substations Rated 52 kV and Above
  • IEEE C37.20.7-2007 – IEEE Guide for Testing Metal-Enclosed Switchgear Rated Up to 38 kV for Internal Arcing Faults
  • IEEE C37.20.7-2007/Cor 1-2010 – IEEE Guide for Testing Metal-Enclosed Switchgear Rated up to 38 kV for Internal Arcing Faults Corrigendum 1
  • IEEE C37.20.7-2017 – IEEE Guide for Testing Switchgear Rated Up to 52 kV for Internal Arcing Faults
  • IEEE C37.20.7-2017/Cor 1-2021 – IEEE Guide for Testing Switchgear Rated up to 52 kV for Internal Arcing Faults—Corrigendum 1
  • IEEE C37.230-2020 – IEEE Guide for Protective Relay Applications to Distribution Lines
  • IEEE C37.233-2009 – IEEE Guide for Power System Protection Testing
  • IEEE C37.234-2009 – IEEE Guide for Protective Relay Applications to Power System Buses
  • IEEE C37.235-2007 – IEEE Guide for the Application of Rogowski Coils Used for Protective Relaying Purposes
  • IEEE C37.24-2003 – IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear
  • IEEE C37.24-2017 – IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear
  • IEEE C37.242-2021 – IEEE Approved Draft Guide for Synchronization, Calibration, Testing, and Installation of Phasor Measurement Units (PMUs) for Power System Protection and Control
  • IEEE C37.245-2018 – IEEE Guide for the Application of Protective Relaying for Phase-Shifting Transformers
  • IEEE C37.245-2018 – IEEE Guide for the Application of Protective Relaying for Phase-Shifting Transformers
  • IEEE C37.250-2020 – IEEE Guide for Engineering, Implementation, and Management of System Integrity Protection Schemes
  • IEEE C37.250-2020 – IEEE Guide for Engineering, Implementation, and Management of System Integrity Protection Schemes
  • IEEE C37.26-2003 – IEEE Guide for Methods of Power-Factor Measurement for Low-Voltage Inductive Test Circuits
  • IEEE C37.26-2014 – IEEE Guide for Methods of Power-Factor Measurement for Low-Voltage (1000 V AC or lower) Inductive Test Circuits
  • IEEE C37.30.2-2015 – IEEE Guide for Wind-Loading Evaluation of High-Voltage (>1000 V) Air-Break Switches
  • IEEE C37.302-2015 – IEEE Guide for Fault Current Limiter (FCL) Testing of FCLs Rated above 1000 V AC
  • IEEE C37.30h-1978 – Allowable Short-Circuit Temperatures for Air Switches
  • IEEE C37.35-1995 – IEEE Guide for the Application, Installation, Operation, and Maintenance of High-Voltage Air Disconnecting and Interrupter Switches
  • IEEE C37.37-1979 – IEEE Loading Guide for AC High-Voltage Air Switches (in excess of 1000 volts)
  • IEEE C37.37-1996 – IEEE Loading Guide for AC High-Voltage Air Switches (in Excess of 1000 V)
  • IEEE C37.37a-1992 – IEEE Loading Guide for AC High-Voltage Air Switches Under Emergency Conditions
  • IEEE C37.48.1-2002 – IEEE Guide for the Operation, Classification, Application, and Coordination of Current-Limiting Fuses with Rated Voltages 1-38kV
  • IEEE C37.48.1-2011 – IEEE Guide for the Application, Operation, and Coordination of High-Voltage (>1000 V) Current-Limiting Fuses
  • IEEE C37.48c-1991 – IEEE Guide for Application of Expulsion Fuses in Enclosures (Supplement to C37.48-1987)
  • IEEE C37.91-1985 – IEEE Guide for Protective Relay Applications to Power Transformers
  • IEEE C37.91-2021 – IEEE Guide for Protecting Power Transformers
  • IEEE C37.93-1987 – IEEE Guide for Power System Protective Relay Applications of Audio Tones over Telephone Channels
  • IEEE C37.96-1988 – IEEE Guide for AC Motor Protection
  • IEEE C37.96-2000 – IEEE Guide for AC Motor Protection
  • IEEE C37.96-2012 – IEEE Guide for AC Motor Protection
  • IEEE C37.97-1979 – IEEE Guide for Protective Relay Applications to Power System Buses
  • IEEE C37.99-1980 – IEEE Guide for Protection of Shunt Capacitor Banks
  • IEEE C37.99-2000 – IEEE Guide for the Protection of Shunt Capacitor Banks
  • IEEE C37.99-2012 – IEEE Guide for the Protection of Shunt Capacitor Banks
  • IEEE C37.99-2012 – IEEE Guide for the Protection of Shunt Capacitor Banks
  • IEEE C57.104-1978 – IEEE Guide for the Detection and Determination of Generated Gases in Oil-Immersed Transformers and Their Relation to the Serviceability of the Equipment
  • IEEE C57.104-1991 – IEEE Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers
  • IEEE C57.104-2008 – IEEE Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers
  • IEEE C57.104-2019 – IEEE Guide for the Interpretation of Gases Generated in Mineral Oil-Immersed Transformers
  • IEEE C57.104-2019 – IEEE Guide for the Interpretation of Gases Generated in Mineral Oil-Immersed Transformers
  • IEEE C57.105-1978 – IEEE Guide for Application of Transformer Connections in Three-Phase Distribution Systems
  • IEEE C57.105-2019 – IEEE Guide for Application of Transformer Connections in Three-Phase Electrical Systems
  • IEEE C57.106-2006 – IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment
  • IEEE C57.106-2015 – IEEE Guide for Acceptance and Maintenance of Insulating Mineral Oil in Electrical Equipment
  • IEEE C57.109-1985 – IEEE Guide for Transformer Through-Fault-Current Duration
  • IEEE C57.109-1993 – IEEE Guide for Liquid-Immersed Transformers Through-Fault-Current Duration
  • IEEE C57.109-2018 – IEEE Guide for Liquid-Immersed Transformers Through-Fault-Current Duration
  • IEEE C57.110-1986 – IEEE Recommended Practice for Establishing Transformer Capability When Supplying Nonsinusoidal Load Currents
  • IEEE C57.111-1989 – IEEE Guide for Acceptance of Silicone Insulating Fluid and Its Maintenance in Transformers
  • IEEE C57.113-1988 – IEEE Trial-Use Guide for Partial Discharge Measurement in Liquid-Filled Power Transformers and Shunt Reactors
  • IEEE C57.113-2010 – IEEE Recommended Practice for Partial Discharge Measurement in Liquid-Filled Power Transformers and Shunt Reactors
  • IEEE C57.114-1990 – IEEE Seismic Guide for Power Transformers and Reactors
  • IEEE C57.115-1991 – IEEE Guide for Loading Mineral-Oil-Immersed Power Transformers Rated in Excess of 100 MVA (65C Winding Rise) (Folded into C57.91-1995) (65C Winding Rise)
  • IEEE C57.116-1989 – IEEE Guide for Transformers Directly Connected to Generators
  • IEEE C57.116-2014 – IEEE Guide for Transformers Directly Connected to Generators
  • IEEE C57.116-2014 – IEEE Guide for Transformers Directly Connected to Generators
  • IEEE C57.119-2001 – IEEE Recommended Practice for Performing Temperature Rise Tests on Oil-Immersed Power Transformers at Loads Beyond Nameplate Ratings
  • IEEE C57.119-2018 – IEEE Recommended Practice for Performing Temperature Rise Tests on Liquid-Immersed Power Transformers at Loads Beyond Nameplate Ratings
  • IEEE C57.12.11-1980 – IEEE Guide for Installation of Oil-Immersed Transformers (10 MVA and Larger, 69-287 kV Rating)
  • IEEE C57.12.12-1980 – IEEE Guide for Installation of Oil-Immersed EHV Transformers 345 kV and Above
  • IEEE C57.12.58-2017 – IEEE Guide for Conducting a Transient Voltage Analysis of a Dry-Type Transformer Coil
  • IEEE C57.12.59-1989 – IEEE Guide for Dry-Type Transformer Through-Fault Current Duration
  • IEEE C57.12.59-2001 – IEEE Guide for Dry-Type Transformer Through-Fault Current Duration
  • IEEE C57.12.59-2015 – IEEE Guide for Dry-Type Transformer Through-Fault Current Duration
  • IEEE C57.12.60-1998 – IEEE Guide for Test Procedures for Thermal Evaluation of Insulation Systems for Solid Cast and Resin-Encapsulated Power and Distribution Transformers
  • IEEE C57.120-2017 – IEEE Guide for Loss Evaluation of Distribution and Power Transformers and Reactors
  • IEEE C57.121-1988 – IEEE Guide for Acceptance and Maintenance of Less Flammable Hydrocarbon Fluid in Transformers
  • IEEE C57.121-1998 – IEEE Guide for Acceptance and Maintenance of Less-Flammable Hydrocarbon Fluid in Transformers
  • IEEE C57.123-2019 – IEEE Guide for Transformer Loss Measurement
  • IEEE C57.123-2019 – IEEE Guide for Transformer Loss Measurement
  • IEEE C57.124-1991 – IEEE Recommended Practice for the Detection of Partial Discharge and the Measurement of Apparent Charge in Dry-Type Transformers
  • IEEE C57.125-1991 – IEEE Guide for Failure Investigation, Documentation, and Analysis for Power Transformers and Shunt Reactors
  • IEEE C57.125-2015 – IEEE Guide for Failure Investigation, Documentation, Analysis, and Reporting for Power Transformers and Shunt Reactors
  • IEEE C57.127-2000 – Guide for the Detection of Acoustic Emissions From Partial Discharges in Oil-Immersed Power Transformers
  • IEEE C57.127-2007 – IEEE Guide for the Detection and Location of Acoustic Emissions from Partial Discharges in Oil-Immersed Power Transformers and Reactors
  • IEEE C57.127-2018 – IEEE Guide for the Detection, Location and Interpretation of Sources of Acoustic Emissions from Electrical Discharges in Power Transformers and Power Reactors
  • IEEE C57.127-2018 – IEEE Guide for the Detection, Location and Interpretation of Sources of Acoustic Emissions from Electrical Discharges in Power Transformers and Power Reactors
  • IEEE C57.13.1-2017 – IEEE Guide for Field Testing of Relaying Current Transformers
  • IEEE C57.13.3-1983 – IEEE Guide for the Grounding of Instrument Transformer Secondary Circuits and Cases
  • IEEE C57.13.3-2005 – IEEE Guide for Grounding of Instrument Transformer Secondary Circuits and Cases
  • IEEE C57.13.3-2014 – IEEE Guide for Grounding of Instrument Transformer Secondary Circuits and Cases
  • IEEE C57.130-2015 – IEEE Guide for the Use of Dissolved Gas Analysis Applied to Factory Temperature Rise Tests for the Evaluation of Mineral Oil-Immersed Transformers and Reactors
  • IEEE C57.134-2000 – IEEE Guide for Determination of Hottest-Spot Temperature in Dry-Type Transformers
  • IEEE C57.134-2013 – IEEE Guide for Determination of Hottest-Spot Temperature in Dry-Type Transformers
  • IEEE C57.136-2000 – IEEE Guide for Sound Level Abatement and Determination for Liquid-Immersed Power Transformers and Shunt Reactors Rated Over 500 kVA
  • IEEE C57.138-1998 – IEEE Recommended Practice for Routine Impulse Test for Distribution Transformers
  • IEEE C57.138-2016 – IEEE Recommended Practice for Routine Impulse Tests for Distribution Transformers
  • IEEE C57.142-2010 – IEEE Guide to Describe the Occurrence and Mitigation of Switching Transients Induced by Transformers, Switching Device, and System Interaction
  • IEEE C57.143-2012 – IEEE Guide for Application for Monitoring Equipment to Liquid-Immersed Transformers and Components
  • IEEE C57.146-2006 – IEEE Guide for Interpretation of Gasses Generated in Silicone-Immersed Transformers
  • IEEE C57.147-2008 – IEEE Guide for Acceptance and Maintenance of Natural Ester Fluids in Transformers
  • IEEE C57.147-2018 – IEEE Guide for Acceptance and Maintenance of Natural Ester Insulating Liquid in Transformers
  • IEEE C57.149-2012 – IEEE Guide for the Application and Interpretation of Frequency Response Analysis for Oil-Immersed Transformers
  • IEEE C57.150-2012 – IEEE Guide for the Transportation of Transformers and Reactors Rated 10 000 kVA or Higher
  • IEEE C57.152-2013 – IEEE Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators, andReactors
  • IEEE C57.153-2015 – IEEE Guide for Paralleling Regulating Transformers
  • IEEE C57.155-2014 – IEEE Guide for Interpretation of Gases Generated in Natural Ester and Synthetic Ester-Immersed Transformers
  • IEEE C57.156-2016 – IEEE Guide for Tank Rupture Mitigation of Liquid-Immersed Power Transformers and Reactors
  • IEEE C57.157-2015 – IEEE Guide for Conducting Functional Life Tests on Switch Contacts Used in Insulating Liquid–Immersed Transformers
  • IEEE C57.158-2017 – IEEE Guide for the Application of Tertiary and Stabilizing Windings in Power Transformers
  • IEEE C57.159-2016 – IEEE Guide on Transformers for Application in Distributed Photovoltaic (DPV) Power Generation Systems
  • IEEE C57.161-2018 – IEEE Guide for Dielectric Frequency Response Test
  • IEEE C57.163-2015 – IEEE Guide for Establishing Power Transformer Capability while under Geomagnetic Disturbances
  • IEEE C57.163-2015/Cor 1-2016 – IEEE Guide for Establishing Power Transformer Capability while under Geomagnetic Disturbances – Corrigendum 1
  • IEEE C57.19.100-1995 – IEEE Guide for Application of Power Apparatus Bushings
  • IEEE C57.19.100-2012 – IEEE Guide for Application of Power Apparatus Bushings
  • IEEE C57.637-2015 – IEEE Guide for the Reclamation of Mineral Insulating Oil and Criteria for Its Use
  • IEEE C57.91-1981 – IEEE Guide for Loading Mineral-Oil-Immersed Overhead and Pad-Mounted Distribution Transformers Rated 500kVA and Less with 65 C or 55 C Average Winding Rise
  • IEEE C57.91-1995 – IEEE Guide for Loading Mineral-Oil-Immersed Transformers
  • IEEE C57.91-1995/Cor 1-2002 – IEEE Guide for Loading Mineral-Oil-Immersed Transformers – Corrigendum 1
  • IEEE C57.91-2011 – IEEE Guide for Loading Mineral-Oil-Immersed Transformers and Step-Voltage Regulators
  • IEEE C57.92-1981 – IEEE Guide for Loading Mineral-Oil-Immersed Power Transformers Up to and Including 100 MVA with 55 C or 65 C Average Winding Rise
  • IEEE C57.93-1995 – IEEE Guide for Installation of Liquid-Immersed Power Transformers
  • IEEE C57.93-2007 – IEEE Guide for Installation and Maintenance of Liquid-Immersed Power Transformers
  • IEEE C57.93-2019 – IEEE Guide for Installation and Maintenance of Liquid-Immersed Power Transformers
  • IEEE C57.94-1982 – IEEE Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type General Purpose Distribution and Power Transformers
  • IEEE C57.94-2015 – IEEE Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type Distribution and Power Transformers
  • IEEE C57.95-1984 – IEEE Guide for Loading Liquid-Immersed Step-Voltage and Induction-Voltage Regulators
  • IEEE C57.98-1986 – IEEE Guide for Transformer Impulse Tests
  • IEEE C57.98-1993 – IEEE Guide for Transformer Impulse Tests
  • IEEE C57.98-2011 – IEEE Guide for Transformer Impulse Tests
  • IEEE C62.21-2003 – IEEE Guide for the Application of Surge Voltage Protective Equipment on AC Rotating Machinery 1000 Volts and Greater
  • IEEE C62.21-2003/Cor 1-2008 – IEEE Guide for the Application of Surge Voltage Protective Equipment on AC Rotating Machinery 1000 V and Greater – Corrigendum 1: Correct Table 2, A.1, and A.2
  • IEEE C62.22-2009 – IEEE Guide for the Application of Metal-Oxide Surge Arresters for Alternating-Current Systems
  • IEEE C62.22.1-1996 – IEEE Guide for the Connection of Surge Arresters to Protect Insulated, Shielded Electric Power Cable Systems
  • IEEE C62.22a-2013 – IEEE Guide for the Application of Metal-Oxide Surge Arresters for Alternating-Current Systems Amendment 1: Supplement to Consider Energy Handling Capabilities
  • IEEE C62.38-1994 – IEEE Guide on Electrostatic Discharge (ESD): ESD Withstand Capability Evaluation Methods (for Electronic Equipment Subassemblies)
  • IEEE C62.41.2-2002/Cor 1-2012 – IEEE Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and Less) AC Power Circuits Corrigendum 1: Deletion of Table A.2 and Associated Text
  • IEEE C62.41.3-2020 – IEEE Guide for Interactions between Power System Disturbances and Surge Protective Devices
  • IEEE C62.43-2005 – IEEE Guide for the Application of Surge Protectors Used in Low-Voltage (Equal to or Less than 1000 Vrms or 1200 Vdc) Data, Communications, and Signaling Circuits
  • IEEE C62.92.1-1987 – IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems Part I–Introduction
  • IEEE C62.92.1-2000 – IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part 1 – Introduction
  • IEEE C62.92.1-2016 – IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems–Part I: Introduction
  • IEEE C62.92.2-1989 – IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part II – Grounding of Synchronous Generator Systems
  • IEEE C62.92.2-2017 – IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part II–Synchronous Generator Systems
  • IEEE C62.92.3-1993 – IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part III – Generator Auxiliary Systems
  • IEEE C62.92.3-2012 – IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part III -Generator Auxiliary Systems
  • IEEE C62.92.4-1991 – IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part IV-Distribution
  • IEEE C62.92.4-2014 – IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems–Part IV: Distribution
  • IEEE C62.92.5-2000 – IEEE Guide for the Application of Neutral Grounding in Electric Utility Systems, Part V – Transmission Systems and Subtransmission Systems
  • IEEE C62.92.5-2009 – IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part V-Transmission Systems and Subtransmission Systems
  • IEEE C62.92.5-2020 – IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems–Part V: Transmission Systems and Subtransmission Systems
  • IEEE C62.92.6-2017 – IEEE Guide for Application of Neutral Grounding in Electrical Utility Systems, Part VI–Systems Supplied by Current-Regulated Sources
  • IEEE C95.3-1991 – IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields – RF and Microwave
  • IEEE/AIEE 52-1951 – AIEE Application Guide for Grounding of Instrument Transformer Secondary Circuits and Cases
  • IEEE/AIEE 53-1952 – AIEE Proposed Guide for Operation and Maintenance of Dry Transformers with Class B Insulation
  • IEEE/AIEE 600-1944 – AIEE Recommended Specification for Speed Governing of Prime Movers Intended to Drive Electric Generators
  • IEEE/AIEE 63-1928 – AIEE Specifications of 30 percent Rubber Insulation for Wire and Cable for General Purposes
  • IEEE/AIEE 66-1957 – AIEE Proposed Guide for Determination of Short Circuit Characteristics of Direct-Current Machinery
  • IEEE/AIEE 75-1958 – AIEE Proposed Test Code for Power-Factor Testing of Mineral Oil Insulated Instrument Transformers
  • IEEE/AIEE 76-1958 – AIEE Proposed Guide for Maintenance of Transformer Askarel
  • IEEE/AIEE 800-1953 – AIEE Test Code for D-C Aircraft Rotating Machines
  • IEEE/AIEE 87-1961 – AIEE Proposed Recommended Practice for Medium-Voltage Motor Controllers for Rubber and Plastics Industries
  • IEEE/AIEE 953-1956 – AIEE Grounding of Industrial Power Systems
  • IEEE/AIEE 955-1962 – AIEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Clad Switchgear
  • IEEE/ANSI 101-1987 – IEEE Guide for the Statistical Analysis of Thermal Life Test Data
  • IEEE/ANSI 450-1987 – IEEE Recommended Practice for Maintenance,Testing, and Replacement of Large Lead Batteries for Generating Stations and Substations
  • IEEE/ANSI C37.35-1976 – IEEE Guide for the Application, Installation, Operation, and Maintenance of High-Voltage Air Disconnecting and Load Interrupter Switches
  • IEEE/ANSI C57.106-1977 – IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment
  • IEEE/ASHRAE 1635-2018 – IEEE/ASHRAE Guide for the Ventilation and Thermal Management of Batteries for Stationary Applications
  • IEEE/IEC 1249-2013 – IEC/IEEE Guide for Computer-based Control for Hydroelectric Power Plant Automation
  • IEEE/IEC 62270-2013 – IEC/IEEE Guide for Computer-based Control for Hydroelectric Power Plant Automation
  • IEEE C62.92-1987 – IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part 1 – Introduction
  • ANSI/IEEE C37.4c-1980 – ANSI Supplement to ANSI C37.4-1953
  • ANSI/IEEE C37.4d-1985 – IEEE Supplements to ANSI/ IEEE C37.4- 1953 and Ansi/IEEE C37.100-1981
  • ASA C57.12d-1957 – ASA Partial Revision of and Supplement to C57.12-1956
  • IEEE 104 –
  • IEEE 105 –
  • IEEE 11073-20202 – Health informatics– Point-of-care medical device communication– Application profile– Baseline
  • IEEE 1116 –
  • IEEE 121 –
  • IEEE 123 –
  • IEEE 124 –
  • IEEE 1249/IEC 62270 – Guide for Computer Based Controls for Hydroelectric Power Plant Automation
  • IEEE 1299-1996 – IEEE Guide for the Connection of Surge Arresters to Protect Insulated, Shielded Electric Power Cable Systems
  • IEEE 238 –
  • IEEE 282 –
  • IEEE 385 –
  • IEEE 401 –
  • IEEE 403 –
  • IEEE 405 –
  • IEEE 407 –
  • IEEE 409 –
  • IEEE 429 –
  • IEEE 435 –
  • IEEE 438 –
  • IEEE 447 –
  • IEEE 466 –
  • IEEE 483 –
  • IEEE 52 –
  • IEEE 525-2007/Cor 1-2008 – IEEE Guide for the Design and Installation of Cable Systems in Substations – Corrigendum 1
  • IEEE 526 –
  • IEEE 534 –
  • IEEE 539A-1984 – Supplement to 539
  • IEEE 562 –
  • IEEE 566-1976 – Recommended Practice For the Design of Display and Control Facilities for Central Control Rooms of Nuclear Power Generating Stations
  • IEEE 589 –
  • IEEE 601 –
  • IEEE 605a-2010 – IEEE Guide for Bus Design in Air-Insulated Substations—Amendment 1
  • IEEE 621 –
  • IEEE 636 –
  • IEEE 646 –
  • IEEE 657 –
  • IEEE 658 –
  • IEEE 659 –
  • IEEE 667 –
  • IEEE 677 –
  • IEEE 678 –
  • IEEE 69 –
  • IEEE 70 –
  • IEEE 71 –
  • IEEE 763 –
  • IEEE 788 –
  • IEEE 797 –
  • IEEE 80-2013/Cor 1-2015 – IEEE Approved Draft Guide for Safety in AC Substation Grounding – Corrigendum 1(Not Published — Incorporated into IEEE Std 80-2013)
  • IEEE 825 –
  • IEEE 827 –
  • IEEE 850 –
  • IEEE 852 –
  • IEEE 986 – Performance and Testing Specification of HVDC System
  • IEEE C37.010c-1993 – Generator Circuit Breakers
  • IEEE C37.010g – Shunt Reactor Switching
  • IEEE C37.04b – Rating Structure Generator CBs
  • IEEE C37.04c-1982 – Altitude Correction Factors
  • IEEE C37.04d-1987 – CBs for GIS Applications
  • IEEE C37.04e-1987 – Definitions for TRV Terms
  • IEEE C37.04h-1986 – Terminal Connection Mechanical Loading Sub 6.2
  • IEEE C37.09b-1993 – Test Proc for Generator Circuit Breakers
  • IEEE C37.09f – Shunt Reactor Switching
  • IEEE C37.101-2006/Cor 1-2007 – IEEE Guide for Generator Ground Protection – Corrigendum 1: Annex A.2 Phasor Analysis (Informative)
  • IEEE C37.20 – Switchgear Assemblies – Including Metal Enclosed Bus
  • IEEE C37.40a-1987 – Definitions for Slant Rated Cutouts
  • IEEE C37.41-1981 – HV Fuses, Distr. Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches & Accessories, Design Test for
  • IEEE C37.41d-1987 – X/R Values for Interrupting Tests on Slant Rated Cutouts
  • IEEE C37.41f-1987 – Mechanical Design Tests for Distribution Cutouts
  • IEEE C57.103-1976 – Specification for New, Unused Transformer-Type Askarels
  • IEEE C57.115-1984 – IEEE Guide for Loading Mineral-Oil-Immersed Power Transformers Rated in Excess of 100 MVA (65 C Winding Rise)
  • IEEE C57.12.57-1992 – Requirements for Ventilated Dry-Type Network Transformers 2 500 kVA and Below, Three-Phase with High-Voltage 34 500 Volts and Below, Low Voltage 216Y/125 and 480Y/125 Volts
  • IEEE C57.12.58-1991 – IEEE Guide for Conducting a Transient Voltage Analysis of a Dry-Type Transformer Coil
  • IEEE C57.13.1-2006 – IEEE Guide for Field Testing of Relaying Current Transformers
  • IEEE C57.96-1989 – IEEE Guide for Loading Dry-Type Distribution and Power Transformers

Disclaimer : jika ada perbedaan antara daftar nama di artikel ini dengan artikel asli dari ieee.org, maka pembaca harus mengikuti artikel asli dari ieee.org tersebut.

Demikian artikel dari standarku.com mengenai Daftar Standar IEEE part 16 Power and Energy sub part 7.

Mohon saran dari pembaca untuk kelengkapan isi artikel ini, silahkan saran tersebut dapat disampaikan melalui kolom komentar.

Baca artikel lain :

Sumber referensi :

Related Posts:

  • Daftar Standar IEEE Power and Energy 1 Daftar Standar IEEE Power and Energy 1 adalah kumpulan judul standar IEEE dengan lingkup : Power and Energy sub part 1. Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi…
  • ISO IEC IEEE 15026-1 software assurance concepts ISO IEC IEEE 15026-1 adalah Standar Internasional mengenai systems and software engineering atau sistem dan rekayasa perangkat lunak, khususnya tentang systems and software assurance part 1: concepts and vocabulary atau…
  • ISO IEC IEEE 15026-4 software assurance life cycle ISO IEC IEEE 15026-4 adalah Standar Internasional mengenai systems and software engineering atau sistem dan rekayasa perangkat lunak, khususnya tentang systems and software assurance part 4: Assurance in the life…
  • Standar ISO/IEC 29110 Standar ISO/IEC 29110 adalah standar dari badan ISO dan IEC mengenai Systems and Software Life Cycle Profiles and Guidelines for Very Small Entities (VSE). Standar ISO/IEC 29110 Judul standar ini…
  • Mengenal standar ANSI ANSI (American National Standards Institute) adalah organisasi nirlaba swasta yang mengawasi pengembangan standar yang disetujui secara sukarela untuk produk, layanan, proses, sistem, dan personel di Amerika Serikat. Tujuan Standar ANSI…
  • Daftar Standar Gratis SDO IBR Daftar Standar Gratis SDO IBR adalah kumpulan judul standar dari organisasi pengembangan standar untuk dibaca secara gratis, hasil kerjasama dengan ANSI IBR. Definisi SDO IBR Artikel ini merupakan lanjutan dari…
  • Daftar Standar IEEE Computer Technology Daftar Standar IEEE Computer Technology adalah kumpulan sebagian judul standar IEEE yang diterbitkan oleh organisasi IEEE SA (Standards Association). Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi IEEE, yang…
  • ISO IEC 13213 bus mikrokomputer ISO IEC 13213 adalah Standar Internasional mengenai teknologi informasi, khususnya tentang arsitektur Control and Status Registers (CSR) untuk bus mikrokomputer dalam sistem mikroprosesor. Standar versi terbaru yang masih berlaku adalah…
  • Daftar Standar IEEE Power and Energy 6 Daftar Standar IEEE Power and Energy 6 adalah kumpulan judul standar IEEE dengan lingkup : Power and Energy sub part 6. Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi…
  • Daftar Standar IEEE Power and Energy 5 Daftar Standar IEEE Power and Energy 5 adalah kumpulan judul standar IEEE dengan lingkup : Power and Energy sub part 5. Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi…
  • Daftar Standar ISO 30000-39999 Daftar Standar ISO 30000-39999 adalah kumpulan judul dari Standar nomor ISO 30000 hingga ISO 39999 yang diterbitkan oleh badan ISO Internasional. Mengenai Standar ISO ISO (International Organization for Standardization) adalah…
  • Daftar Standar IEEE Power and Energy 4 Daftar Standar IEEE Power and Energy 4 adalah kumpulan judul standar IEEE dengan lingkup : Power and Energy sub part 4. Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi…
  • ISO IEC IEEE 15026-1 Bibliografi ISO IEC IEEE 15026-1 Bibliografi adalah Daftar Pustaka Standar Internasional mengenai systems and software engineering atau sistem dan rekayasa perangkat lunak, khususnya tentang systems and software assurance part 1: concepts…
  • ISO IEC IEEE 15026-1 Klausa 3.1 - 3.5 ISO IEC IEEE 15026-1 Klausa 3.1 - 3.5 adalah Standar Internasional mengenai systems and software engineering atau sistem dan rekayasa perangkat lunak, khususnya tentang systems and software assurance part 1:…
  • Daftar Standar ISO 21000-21999 Daftar Standar ISO 21000-21999 adalah kumpulan judul dari Standar nomor ISO 21000 hingga ISO 21999 yang diterbitkan oleh badan ISO Internasional. Mengenai Standar ISO ISO (International Organization for Standardization) adalah…

Leave a Comment