Daftar Standar IEEE Power and Energy 3

Daftar Standar IEEE Power and Energy 3 adalah kumpulan judul standar IEEE dengan lingkup : Power and Energy sub part 3.

Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi IEEE, yang penamaan nya diawali dengan kode “IEEE”.

IEEE SA (Standards Association) adalah organisasi pembangun konsensus terkemuka yang memelihara, mengembangkan, dan memajukan teknologi global, melalui IEEE.

Artikel ini adalah lanjutan dari artikel sebelumnya dari standarku.com mengenai organisasi IEEE SA berikut :

Jadi artikel ini ditujukan untuk membantu pembaca dalam mencari apa saja judul standar IEEE yang dibutuhkan.

Untuk mempermudah pencarian judul standar, disini kami cantumkan pembagian berdasarkan klasifikasi berikut.

Klasifikasi Standar IEEE

Standar IEEE dibagi menjadi 21 klasifikasi sebagaimana berikut :

  1. Aerospace Electronics
  2. Antennas and Propagation
  3. Batteries
  4. Blockchain
  5. Communications
  6. Computer Technology
  7. Consumer Electronics
  8. Electromagnetic Compatibility
  9. Green and Clean Technology
  10. Healthcare IT
  11. Industry Applications
  12. Instrumentation and Measurement
  13. Nanotechnology
  14. National Electrical Safety Code (NESC)
  15. Nuclear Power
  16. Power and Energy
  17. Power Electronics
  18. Smart Grid
  19. Software and Systems Engineering
  20. Transportation
  21. Wired and Wireless Communications

Dikarenakan standar IEEE sangat banyak jumlahnya, maka akan dibagi menjadi beberapa artikel seri Daftar Standar IEEE.

Pada artikel sebelumnya mencakup kategori yang pertama hingga ke 15 sebagaimana berikut :

Pada artikel kali ini mencakup kategori yang ke 16 (part 16) yakni : Power and Energy.

Kategori Power and Energy memiliki jumlah standar yang sangat banyak, oleh karena itu kami bagi lagi menjadi beberapa sub part artikel.

Artikel ini merupakan sebagian daftar judul dari kategori Power and Energy untuk sub part 3.

Kategori lain akan dilanjutkan pada artikel dari standarku.com berikutnya.

Kolaborasi Organisasi Pengembang Standar

Pada beberapa judul artikel di kategori ini ada yang merupakan hasil kolaborasi antara IEEE dengan organisasi pengembang standar lain seperti :

  • ISO (International Organization for Standardization), adalah suatu organisasi atau lembaga nirlaba internasional, yang bertujuan untuk membuat dan memperkenalkan standar dan standardisasi internasional untuk berbagai tujuan.
  • IEC, adalah organisasi standardisasi internasional yang menyusun dan menerbitkan standar-standar internasional untuk seluruh bidang elektrik, elektronik dan teknologi yang terkait atau bidang teknologi elektro (electrotechnology).
  • ANSI (American National Standards Institute), adalah organisasi nirlaba swasta yang mengawasi pengembangan standar yang disetujui secara sukarela untuk produk, layanan, proses, sistem, dan personel di Amerika Serikat.

Seperti yang ditunjukkan pada judul dengan kode awalan nama gabungan sebagaimana berikut :

  • IEEE/IEC
  • IEEE/ISO/IEC
  • IEEE/ISO
  • IEEE/ANSI
  • ANSI/AAMI
  • IEEE/AIEE

Lebih jelas mengenai organisasi pengembang standar lain diatas dapat dibaca pada artikel lain dari standarku.com berikut :

Daftar Standar IEEE

Berikut adalah judul standar-standar IEEE part 16 yang dikutip dari ieee.org per 25 Agustus 2021 :

Daftar Standar IEEE Power and Energy 3

  • IEEE 161-1971 – IEEE Standard Definitions on Electron Tubes
  • IEEE 1734-2011 – IEEE Standard for Quality of Electronic and Software Intellectual Property Used in System and System on Chip (SoC) Designs
  • IEEE 1834-2019 – IEEE Standard for Technology Supervision Code for Wind Turbine Rotor Systems
  • IEEE 1834-2019 – IEEE Standard for Technology Supervision Code for Wind Turbine Rotor Systems
  • IEEE 1874-2013 – IEEE Standard for Documentation Schema for Repair and Assembly of Electronic Devices
  • IEEE 2404-2016 – IEEE Standard for Power Plant De-Nitrogen Oxide (DeNOx) Plate-Type Catalyst
  • IEEE 252-1995 – IEEE Standard Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap
  • IEEE 255-1963 – IEEE Standard Letter Symbols for Semiconductor Devices
  • IEEE 274-1966 – Standard Definitions of Terms for Integrated Electronics
  • IEEE 2772-2021 – IEEE Standard for Test Method for Energy Loss of Overhead Conductor
  • IEEE 2780-2019 – IEEE Standard for Insulation-Piercing Connectors
  • IEEE 28-1972 – IEEE Standard for Surge Arresters (Lightning Arresters) for Alternating Current Power Circuits
  • IEEE 290-1980 – IEEE Standard for Electric Couplings; Part I – General, Rating, Performance Characteristics; Part II – Test Procedures
  • IEEE 295-1969 – IEEE Standard for Electronics Power Transformers
  • IEEE 333-1980 – IEEE Standard for Electrical Installation of Packaging Machinery and Associated Equipment
  • IEEE 339-1972 – IEEE Standard Requirements for Switching-Impulse Voltage Insulation Strength for AC High Voltage Circuit Breakers Rated on a Symmetrical Current Basis (362 kB and Above)
  • IEEE 340-1972 – IEEE Standard Requirements for Pressurized Components of AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE 343-1972 – IEEE Standard Requirements for External Insulation for Outdoor AC High Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE 347-1972 – IEEE Standard Method of Measuring Recorded Flux of Magnetic Sound Records at Medium Wavelengths
  • IEEE 351-1972 – IEEE Trial Use Standard Guide on Solid State Devices: Varactor Measurements Part II – Characterization of Large-Signal Devices
  • IEEE 381-1977 – IEEE Standard Criteria for Type Tests of Class 1E Modules Used in Nuclear Power Generating Stations
  • IEEE 382-1996 – IEEE Standard for Qualification of Actuators for Power-Operated Valve Assemblies With Safety-Related Functions for Nuclear Power Plants
  • IEEE 421.1-1986 – IEEE Standard Definitions for Excitation Systems for Synchronous Machines
  • IEEE 421B-1979 – IEEE Standard for High-Potential-Test Requirements for Excitation Systems for Synchronous Machines
  • IEEE 428-1981 – IEEE Standard Definitions and Requirements for Thyristor AC Power Controllers
  • IEEE 430-1986 – IEEE Standard Procedures for the Measurement of Radio Noise from Overhead Power Lines and Substations
  • IEEE 48-1990 – IEEE Standard Test Procedures and Requirements for High-Voltage Alternating-Current Cable Terminations
  • IEEE 515.1-2012 – IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Commercial Applications
  • IEEE 539-1979 – IEEE Standard Definitions of Terms Relating to Overhead-Power-Line Corona and Radio Noise
  • IEEE 539-1990 – IEEE Standard Definitions of Terms Relating to Corona and Field Effects of Overhead Power Lines
  • IEEE 58-1978 – IEEE Standard Induction Motor Letter Symbols
  • IEEE 581-1978 – IEEE Standard Definitions, Symbols, and Characterization of Metal-Nitrite-Oxide Field-Effect Transistors
  • IEEE 592-1977 – IEEE Standard for Exposed Semiconducting Shields on Premolded High Voltage Cable Joints and Separable Insulated Connectors
  • IEEE 592-1990 – IEEE Standard for Exposed Semiconducting Shields on High-Voltage Cable Joints and Separable Insulated Connectors
  • IEEE 599-1985 – IEEE Standard Definitions of Power Systems Data Transmission and Related Channel Terminology
  • IEEE 603-1977 – IEEE Trial Use Standard for Safety Systems for Nuclear Power Generating Stations
  • IEEE 638-1992 – IEEE Standard for Qualification of Class 1E Transformers for Nuclear Power Generating Stations
  • IEEE 638-2013 – IEEE Standard for Qualification of Class 1E Transformers for Nuclear Power Generating Stations
  • IEEE 644-1987 – IEEE Standard Procedures for Measurement of Power Frequency Electric and Magnetic Fields from AC Power Lines
  • IEEE 649-1980 – IEEE Standard for Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations
  • IEEE 690-2018 – IEEE Standard for Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations
  • IEEE 690-2018 – IEEE Standard for Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations
  • IEEE 738-1993 – IEEE Standard for Calculating the Current-Temperature of Bare Overhead Conductors
  • IEEE 74-1958 – IEEE Standard Test Code for Industrial Control (600 Volts or Less)
  • IEEE 765-1983 – IEEE Standard for Preferred Power Supply for Nuclear Power Generating Stations
  • IEEE 837-1984 – IEEE Standard for Qualifying Permanent Connectors Used in Substation Grounding
  • IEEE 837-1989 – IEEE Standard for Qualifying Permanent Connections Used in Substation Grounding
  • IEEE 858-1993 – IEEE Standard Definitions in Power Operations Terminology
  • IEEE 859-1987 – IEEE Standard Terms for Reporting and Analyzing Outage Occurrences and Outage States of Electrical Transmission Facilities
  • IEEE 94-1968 – IEEE Standard Definitions of Terms for Automatic Generation Control on Electric Power Systems
  • IEEE 972-1985 – IEEE Trial-Use Standard for Connections of Insulated Aluminum Conductors
  • IEEE 98-2002 – IEEE Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials
  • IEEE 98-2016 – IEEE Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials
  • IEEE C37.013-1993 – IEEE Standard for AC High Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.017-2020 – IEEE Standard for Bushings for High-Voltage (Over 1000 Vac) Circuit Breakers and Gas-Insulated Switchgear
  • IEEE C37.04g-1986 – Supplement to IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.06-2009 – IEEE Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis–Preferred Ratings and Related Required Capabilities for Voltages Above 1000 V
  • IEEE C37.100.2-2018 – IEEE Standard for Common Requirements for Testing of AC Capacitive Current Switching Devices over 1000 V
  • IEEE C37.13-1981 – IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures
  • IEEE C37.14-1979 – IEEE Standard for Low-Voltage DC Power Circuit Breakers Used in Enclosures
  • IEEE C37.14-1992 – IEEE Standard for Low-Voltage DC Power Circuit Breakers Used in Enclosures
  • IEEE C37.14-1999 – IEEE Standard for Low-Voltage DC Power Circuit Breakers Used in Enclosures
  • IEEE C37.20.1-1987 – IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit-Breaker Switchgear
  • IEEE C37.20.1-1993 – IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear
  • IEEE C37.20.10-2016 – IEEE Standard Definitions for AC (52 kV and below)and DC (3.2 kV and below) Switchgear Assemblies
  • IEEE C37.20.3-1987 – IEEE Standard for Metal-Enclosed Interrupter Switchgear
  • IEEE C37.20.4-2013 – IEEE Standard for Indoor AC Switches (1 kV to 38 kV) for Use in Metal-Enclosed Switchgear
  • IEEE C37.21-1985 – IEEE Standard for Control Switchboards
  • IEEE C37.29-1981 – IEEE Standard for Low-Voltage AC Power Circuit Protectors Used in Enclosures
  • IEEE C37.41c-1991 – IEEE Test Standard for Expulsion Fuses in Enclosures (Supplement to C37.41-1988)
  • IEEE C37.42-2016 – IEEE Standard Specifications for High-Voltage (>1000 V) Fuses and Accessories
  • IEEE C37.46-2000 – Amerian National Standard for High Voltage Expulsion and Current-Limiting Type Power Class Fuses and Fuse Disconnecting Switches
  • IEEE C37.46-2010 – IEEE Standard Specifications for High-Voltage (>1000 V) Expulsion and Current-Limiting Power Class Fuses and Fuse Disconnecting Switches
  • IEEE C37.47-2000 – American National Standard for High Voltage Current-Limiting Type Distribution Class Fuses and Fuse Disconnecting Switches
  • IEEE C37.59-2002 – IEEE Standard Requirements for Conversion of Power Switchgear Equipment
  • IEEE C37.62-2020 – IEEE Standard for Pad-Mounted Dry Vault, Submersible, and Overhead Fault Interrupters for Alternating Current Systems Up to and Including 38 kV
  • IEEE C37.63-1984 – IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for AC Systems
  • IEEE C37.71-1984 – IEEE Standard for Three-Phase, Manually Operated Subsurface Load Interrupting Switches for Alternating-Current Systems
  • IEEE C37.90-1978 – IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus
  • IEEE C37.90-2005 – IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus
  • IEEE C37.90-2005 – IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus
  • IEEE C50.12-2005 – IEEE Standard for Salient-Pole 50 Hz and 60 Hz Synchronous Generators and Generator/Motors for Hydraulic Turbine Applications Rated 5 MVA and Above
  • IEEE C57.12.23-1992 – IEEE Standard for Transformers–Underground-Type, Self-Cooled, Single-Phase Distribution Transformers with Separable, Insulated, High-Voltage Connectors; High Voltage (24 940 GrdY/14 400 V and Below) and Low-Voltage (240/120 V, 167 kVA and Smaller)
  • IEEE C57.12.24-2016 – IEEE Standard for Submersible, Three-Phase Transformers, 3750 kVA and Smaller: High Voltage, 34 500 GrdY/19 920 Volts and Below; Low Voltage, 600 Volts and Below
  • IEEE C57.12.30-2020 – IEEE Standard for Pole-Mounted Equipment–Enclosure Integrity for Coastal Environments
  • IEEE C57.12.31-2020 – IEEE Standard for Pole-Mounted Equipment–Enclosure Integrity
  • IEEE C57.12.35-1996 – IEEE Standard for Bar Coding for Distribution Transformers
  • IEEE C57.12.40-2017 – IEEE Standard for Network, Three-Phase Transformers, 2500 kVA and Smaller; High Voltage, 34 500 V and Below; Low Voltage, 600 V and Below; Subway and Vault Types (Liquid Immersed)
  • IEEE C57.12.44-1994 – IEEE Standard Requirements for Secondary Network Protectors
  • IEEE C57.12.80-2010 – IEEE Standard Terminology for Power and Distribution Transformers
  • IEEE C57.13.2-2005 – IEEE Standard for Conformance Test Procedure for Instrument Transformers
  • IEEE C57.13.6-2005 – IEEE Standard for High Accuracy Instrument Transformers
  • IEEE C57.13.7-2018 – IEEE Standard for Current Transformers with Maximum Milliampere Secondary Current of 250 mA
  • IEEE C57.13.7-2018 – IEEE Standard for Current Transformers with Maximum Milliampere Secondary Current of 250 mA
  • IEEE C57.16-2011 – IEEE Standard for Requirements, Terminology, and Test Code for Dry-Type Air-Core Series-Connected Reactors
  • IEEE C57.17-2012 – IEEE Standard Requirements for Arc Furnace Transformers
  • IEEE C62.1-1989 – IEEE Standard for Gapped Silicon-Carbide Surge Arresters for AC Power Circuits
  • IEEE C62.37-1996 – IEEE Standard Test Specification for Thyristor Diode Surge Protective Devices
  • IEEE C62.50-2012 – IEEE Standard for Performance Criteria and Test Methods for Plug-in (Portable) Multiservice (Multiport) Surge-Protective Devices for Equipment Connected to a 120 V/240 V Single Phase Power Service and Metallic Conductive Communication Line(s)
  • IEEE C93.5-2021 – IEEE Approved Draft Standard for Power Line Carrier Transmitter/Receiver Equipment used to Transfer Discrete Teleprotection Signals
  • IEEE/AIEE 59-1962 – AIEE Standard for Semiconductor Rectifier Components
  • IEEE/ANSI C37.06.1-2000 – American National Standard Guide for High-Voltage Circuit Breakers Rated on Symmetrical Current Basis Designated – Definite Purpose for Fast Transient Recovery Voltage Rise Times
  • IEEE/ANSI C37.13-1973 – American National Standard for Low-Voltage AC power Circuit Breakers used in Enclosures
  • IEEE/ANSI C37.92-1969 – ANSI American National Standard Guide for Induction Motor protection
  • IEEE/ASA C37.35-1962 – ASA American Standard Guide for the Operation and Maintenance of High Voltage Disconnecting Switches
  • IEEE/ASA C37.43-1962 – ASA American Standard Specifications for Distribution Fuse Links for Use in Distribution Enclosed, Open, and Open-Link Cutouts
  • IEEE/ASA C37.44-1962 – ASA American Standard Specifications for Distribution Oil Cutouts and Fuse Links
  • IEEE 1277-2000 – IEEE Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors for DC Power Transmission
  • IEEE 1547.1a-2015 – IEEE Standard Conformance Test Procedures for Equipment Interconnecting Distributed Resources with Electric Power Systems – Amendment 1
  • IEEE 18-2012 – IEEE Standard for Shunt Power Capacitors
  • IEEE 2700-2014 – IEEE Standard for Sensor Performance Parameter Definitions
  • IEEE 835 Disk-1994 – IEEE Standard Power Cable Ampacity Table (Electronic)
  • IEEE 835-1994 – IEEE Standard Power Cable Ampacity Tables
  • IEEE C37.45-2007 – IEEE Standard Specifications for High Voltage Distribution Class Enclosed Single-Pole Air Switches with Rated Voltages from 1 through 8.3 kV
  • IEEE C37.59-1991 – IEEE Standard Requirements for Conversion of Power Switchgear Equipment
  • IEEE C37.59-1996 – IEEE Standard Requirements for Conversion of Power Switchgear Equipment
  • IEEE C37.63-2005 – IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for AC Systems
  • IEEE C37.63-2013 – IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV
  • IEEE C57.12.01-2015 – IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers
  • IEEE C57.12.29-2014 – IEEE Standard for Pad-Mounted Equipment–Enclosure Integrity for Coastal Environments
  • IEEE C57.12.32-2002 – IEEE Standard for Submersible Equipment – Enclosure Integrity
  • IEEE C57.148-2011 – IEEE Standard for Control Cabinets for Power Transformers
  • IEEE C57.15-2009 – IEEE Standard Requirements, Terminology, and Test Code for Step-Voltage Regulators
  • IEEE C57.32a-2020 – IEEE Standard for Requirements, Terminology, and Test Procedure for Neutral Grounding Devices–Amendment 1: Neutral Grounding Resistors Clause (AM)
  • ASA C37.46-1962 – ASA American Standard Specifications for Power Fuses and Fuse Disconnecting Switches
  • IEEE 346-1973 – IEEE Standard Definitions in Power Operations Terminology Including Terms for Reporting and Analyzing Outages of Electrical Transmission and Distribution Facilities and Interruptions to Customer Service
  • IEEE 48-1996 – IEEE Standard Test Procedures and Requirements for Alternating-Current Cable Terminations 2.5 kV Through 765 kV
  • IEEE C37.013a-2007 – IEEE Standard for AC High Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis – Amendment 1: Supplement for Use with Generators Rated 10-100 MVA
  • IEEE C37.09a-2005 – IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis- Amendment 1: Capacitance Current Switching
  • IEEE C57.12.91-2020 – IEEE Standard Test Code for Dry-Type Distribution and Power Transformers
  • IEEE/IEC 60076-57-1202-2016 – IEC/IEEE International Standard Power transformers –Part 57-1202: Liquid immersed phase-shifting transformers
  • IEEE 112-2004 – IEEE Standard Test Procedure for Polyphase Induction Motors and Generators
  • IEEE 1277-2010 – IEEE Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors for DC Power Transmission
  • IEEE 1277-2020 – IEEE Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors and for Dry-Type Converter Reactors for DC Power Transmission
  • IEEE 1307-2018 – IEEE Standard for Fall Protection for Electric Utility Transmission and Distribution on Poles and Structures
  • IEEE 1344-1995 – IEEE Standard for Synchrophasors for Power Systems
  • IEEE 2700-2017 – IEEE Standard for Sensor Performance Parameter Definitions
  • IEEE 848-2015 – IEEE Standard Procedure for the Determination of the Ampacity Derating Factor for Fire-Protected Cable Systems
  • IEEE C37.04a-2003 – IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis: Amendment 1 Capacitance Current Switching
  • IEEE C37.09-1999/Cor 1-2007 – IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis – Corrigendum 1
  • IEEE C37.09-2018/Cor 1-2021 – IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers with Rated Maximum Voltage Above 1000 V – Corrigendum 1
  • IEEE C37.105-2010 – IEEE Standard for Qualifying Class 1E Protective Relays and Auxiliaries for Nuclear Power Generating Stations
  • IEEE C37.122-2010 – IEEE Standard for High Voltage Gas-Insulated Substations Rated Above 52 kV
  • IEEE C37.18-1979 – IEEE Standard Enclosed Field Discharge Circuit Breakers for Rotating Electric Machinery
  • IEEE C37.20.1a-2005 – IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear—Amendment 1: Short-Time and Short-Circuit Withstand Current Tests—Minimum Areas for Multiple Cable Connections
  • IEEE C37.20.1a-2020 – IEEE Standard for Metal-Enclosed Low-Voltage (1000 V ac and below, 3200 V dc and below) Power Circuit Breaker Switchgear – Amendment 1: Control and Secondary Circuits and Devices, and All Wiring
  • IEEE C37.20.1a-2020 – IEEE Standard for Metal-Enclosed Low-Voltage (1000 V ac and below, 3200 V dc and below) Power Circuit Breaker Switchgear – Amendment 1: Control and Secondary Circuits and Devices, and All Wiring
  • IEEE C37.20.1b-2006 – IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear – Amendment 2: Additional Requirements for Control and Auxiliary Power Wiring in DC Traction Power Switchgear
  • IEEE C37.20.2-2015 – IEEE Standard for Metal-Clad Switchgear
  • IEEE C37.20.2a-2020 – IEEE Standard for Metal-Clad Switchgear—Amendment 1: Control and Secondary Circuits and Devices, and All Wiring
  • IEEE C37.20.2a-2020 – IEEE Standard for Metal-Clad Switchgear—Amendment 1: Control and Secondary Circuits and Devices, and All Wiring
  • IEEE C37.20.4-2001 – IEEE Standard for Indoor AC Switches (1 kV – 38 kV) for Use in Metal-Enclosed Switchgear
  • IEEE C37.20.6-1997 – IEEE Standard for 4.76 kV to 38 kV Rated Grounding and Testing Devices Used in Enclosures
  • IEEE C37.20.6-2015 – IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures
  • IEEE C37.27-1987 – IEEE Standard Application Guide for Low-Voltage AC Nonintegrally Fused Power Circuit Breakers (Using Separately Mounted Current-Limiting Fuses)
  • IEEE C37.30-1997 – IEEE Standard Requirements for High Voltage Switches
  • IEEE C37.34-1994 – IEEE Standard Test Code for High-Voltage Air Switches
  • IEEE C37.45-2016 – IEEE Standard for Design Test Specifications for High Voltage (> 1000 V) Distribution Class Enclosed Single-Pole Air Switches
  • IEEE C37.82-2017 – IEEE Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations
  • IEEE C57.12.28-2005 – IEEE Standard for Pad-Mounted Equipment – Enclosure Integrity
  • IEEE C57.12.28-2014 – IEEE Standard for Pad-Mounted Equipment–Enclosure Integrity
  • IEEE C57.13-2008 – IEEE Standard Requirements for Instrument Transformers
  • IEEE C57.13-2016 – IEEE Standard Requirements for Instrument Transformers
  • AIEE 15-1944 – AIEE American Standard for Industrial Control Apparatus
  • IEEE 1388-2000 – IEEE Standard for the Electronic Reporting of Transformer Test Data
  • IEEE 82-1994 – IEEE Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors
  • IEEE C37.09-1979 – IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.20.4-1996 – IEEE Trial-Use Standard for Indoor AC Switches (1 kV-38 kV) for Use in Metal-Enclosed Switchgear
  • IEEE C57.12.56-1986 – IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Ventilated Dry-Type Power and Distribution Transformers
  • IEEE C57.12.91-2011 – IEEE Standard Test Code for Dry-Type Distribution and Power Transformers
  • IEEE/AIEE 30-1944 – AIEE American Standard Definitions and General Standards for Wire and Cable
  • IEEE/AIEE 48-1948 – AIEE Standard for Potheads
  • IEEE/ASA 29-1941 – American Standards for Wet Test
  • IEEE/ASA C37.4thru9-1945 – ASA American Standards for Alternating Current Power Circuit Breakers
  • IEEE/IEC 60076-16-2018 – IEC/IEEE International Standard – Power transformers – Part 16: Transformers for wind turbine applications
  • ANSI/IEEE 430-1976 – IEEE Standard Procedures for the Measurement of Radio Noise from Overhead Power Lines
  • IEEE 1037-1992 – IEEE Standard Terms and Definitions for Surface Acoustic Wave (SAW) Devices
  • IEEE 106-1972 – IEEE Standard Test procedure for Test Procedure for Toroidal Magnetic Amplifier Cores (Including Core Material Data)
  • IEEE 112-1984 – IEEE Standard Test Procedure for Polyphase Induction Motors and Generators
  • IEEE 112-1991 – IEEE Standard Test Procedure for Polyphase Induction Motors and Generators
  • IEEE 112-1996 – IEEE Standard Test Procedure for Polyphase Induction Motors and Generators
  • IEEE 112-2017 – IEEE Standard Test Procedure for Polyphase Induction Motors and Generators
  • IEEE 1138-1994 – IEEE Standard Construction of Composite Fiber Optic Groundwire (OPGW) for Use on Electric Utility Power Lines
  • IEEE 114-1982 – IEEE Standard Test Procedure for Single-Phase Induction Motors
  • IEEE 114-2001 – IEEE Standard Test Procedure for Single-Phase Induction Motors
  • IEEE 116-1975 – IEEE Standard Test Procedures for Carbon Brushes
  • IEEE 117-1974 – IEEE Standard Test Procedure for Evaluation of Systems of Insulating Materials for Random-Wound AC Electric Machinery
  • IEEE 1202-1991 – IEEE Standard for Flame Testing of Cables for Use in Cable Tray in Industrial and Commercial Occupancies
  • IEEE 1206-1994 – IEEE Standard Methods for Measuring Transmission Performance of Telephone Handsets and Headsets
  • IEEE 1226.2-1993 – IEEE ABBET(TM) Trial-Use Standard for Ada-Based ATLAS-Level Test Procedure Interface for A Broad-Based Environment for Test (ABBET(TM))
  • IEEE 1307-2004 – IEEE Standard for Fall Protection for Utility Work
  • IEEE 144-1971 – IEEE Standard Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Clad Switchgear
  • IEEE 1451.0-2007 – IEEE Standard for a Smart Transducer Interface for Sensors and Actuators – Common Functions, Communication Protocols, and Transducer Electronic Data Sheet (TEDS) Formats
  • IEEE 1549-2011 – IEEE Standard for Microwave Filter Definitions
  • IEEE 1549-2011/Cor 1-2017 – IEEE Standard for Microwave Filter Definitions—Corrigendum 1
  • IEEE 1613-2003/Cor 1-2006 – IEEE Standard Environmental and Testing Requirements for Communications Networking Devices in Electric Power Substations – Corrigendum 1
  • IEEE 1673-2015 – IEEE Standard for Requirements for Conduit and Cable Seals for Field Connected Wiring to Equipment in Petroleum and Chemical Industry Exposed to Pressures above Atmospheric (1.5 kPa, 0.22 psi)
  • IEEE 1725-2021 – IEEE Standard for Rechargeable Batteries for Mobile Phones
  • IEEE 18-1992 – IEEE Standard for Shunt Power Capacitors
  • IEEE 18-2002 – IEEE Standard for Shunt Power Capacitors
  • IEEE 1844-2015 – IEEE Standard Test Procedure for Determining Circuit Integrity Performance of Fire Resistive Cables in Nuclear Facilities
  • IEEE 223-1966 – IEEE Standard Definitions of Terms for Thyristors
  • IEEE 254-1963 – IEEE Standard Definitions of Parametric Device Terms
  • IEEE 259-1974 – IEEE Standard Test Procedure for Evaluation of Systems of Insulation for Specialty Transformers
  • IEEE 259-1994 – IEEE Standard Test Procedure for Evaluation of Systems of Insulation for Specialty Transformers
  • IEEE 259-1999 – IEEE Standard Test Procedure for Evaluation of Systems of Insulation for Dry-Type Specialty and General-Purpose Transformers
  • IEEE 264-1977 – IEEE Standard for High-Power Wide-Band Transformers (100 Watts and Above)
  • IEEE 318-1971 – IEEE Trial Use Standard Guide on Solid State Devices: Varactor Measurements Part 1- Small Signal Measurements
  • IEEE 319-1971 – IEEE Standard on Magnetostrictive Materials: Piezomagnetic Nomenclature
  • IEEE 323-1983 – IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations
  • IEEE 333-1972 – IEEE Standard for Electrical Installation of Packaging Machinery and Associated Equipment
  • IEEE 345-1972 – IEEE Standard Test Procedure for Thermal Evaluation of Oil-Immersed Distribution Transformers
  • IEEE 376-1975 – IEEE Standard for the Measurement of Impulse Strength and Impulse Bandwidth
  • IEEE 386-1985 – IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems Above 600 V
  • IEEE 386-1995 – IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems above 600 V
  • IEEE 387-1984 – IEEE Standard Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations
  • IEEE 388-1992 – IEEE Standard for Transformers and Inductors in Electronic Power Conversion Equipment
  • IEEE 404-1977 – IEEE Standard for Cable Joints
  • IEEE 421-1972 – IEEE Standard Criteria and Definitions for Excitation Systems for Synchronous Machines
  • IEEE 421.3-2016 – IEEE Standard for High-Potential Test Requirements for Excitation Systems for Synchronous Machines
  • IEEE 430-1972 – IEEE Trial Use Standard Procedures for the Measurement of Radio Noise from Overhead Power Lines
  • IEEE 449-1990 – IEEE Standard for Ferroresonant Voltage Regulators
  • IEEE 463-1977 – IEEE Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones
  • IEEE 463-1993 – IEEE Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones
  • IEEE 505-1977 – IEEE Standard Nomenclature for Generating Station Electric Power Systems
  • IEEE 515.1-2005 – Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Commercial Applications
  • IEEE 54-1955 – IEEE Standard, Test Code, and Recommended Practice for Induction and Dielectric Heating Equipment
  • IEEE 548-1984 – IEEE Standard Criteria and Guidelines for the Laboratory Measurement and Reporting of Fly Ash Resistivity
  • IEEE 577-1976 – IEEE Standard Requirements for Reliability Analysis in the Design and Operation of Safety Systems for Nuclear Power Generating Stations
  • IEEE 597-1983 – IEEE Standard Practices and Requirements for General Purpose Thyristor DC Drives
  • IEEE 60076-21-2011 – Power Transformers – Part 21: Standard Requirements, Terminology, and Test Code for Step-Voltage Regulators
  • IEEE 656-1985 – IEEE Standard for the Measurement of Audible Noise from Overhead Transmission Lines
  • IEEE 789-1988 – IEEE Standard Performance Requirements for Communications and Control Cables for Application in High Voltage Environments
  • IEEE 824-1985 – IEEE Standard for Series Capacitors in Power Systems
  • IEEE 824-1994 – IEEE Standard for Series Capacitors in Power Systems
  • IEEE 848-1996 – IEEE Standard Procedure for the Determination of the Ampacity Derating of Fire-Protected Cables
  • IEEE 858-1987 – IEEE Standard Definitions in Power Operations Terminology
  • IEEE 98-1984 – IEEE Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials
  • IEEE C135.1-1999 – IEEE Standard for Zinc-Coated Steel Bolts and Nuts for Overhead Line Construction
  • IEEE C37.04-1979 – IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.04-1999/Cor 1-2009 – IEEE Standard for Rating Structure for AC High-Voltage Circuit Breakers Corrigendum 1
  • IEEE C37.04i-1991 – Supplement to IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.09a-1991 – IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.09g-1991 – IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.100d-1991 – Supplement to C37.100-1981, IEEE Standard Definitions for Power Switchgear
  • IEEE C37.111-1991 – IEEE Standard Common Format for Transient Data Exchange (COMTRADE) for Power Systems
  • IEEE C37.122-1983 – IEEE Standard for Gas-Insulated Substations
  • IEEE C37.122-1993 – IEEE Standard for Gas-Insulated Substations
  • IEEE C37.122-2021 – IEEE Standard for High-Voltage Gas-Insulated Substations Rated Above 52 kV
  • IEEE C37.20.2-1993 – IEEE Standard for Metal-Clad and Station-Type Cubicle Switchgear
  • IEEE C37.20.2b-1994 – Supplement to IEEE Standard for Metal-Clad and Station-Type Cubicle Switchgear: Current Transformers Accuracies

Disclaimer : jika ada perbedaan antara daftar nama di artikel ini dengan artikel asli dari ieee.org, maka pembaca harus mengikuti artikel asli dari ieee.org tersebut.

Demikian artikel dari standarku.com mengenai Daftar Standar IEEE part 16 Power and Energy sub part 3.

Mohon saran dari pembaca untuk kelengkapan isi artikel ini, silahkan saran tersebut dapat disampaikan melalui kolom komentar.

Baca artikel lain :

Sumber referensi :

Related Posts:

  • Daftar Standar ISO 30000-39999 Daftar Standar ISO 30000-39999 adalah kumpulan judul dari Standar nomor ISO 30000 hingga ISO 39999 yang diterbitkan oleh badan ISO Internasional. Mengenai Standar ISO ISO (International Organization for Standardization) adalah…
  • Daftar Standar IEEE Power and Energy 2 Daftar Standar IEEE Power and Energy 2 adalah kumpulan judul standar IEEE dengan lingkup : Power and Energy sub part 2. Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi…
  • Mengenal standar ANSI ANSI (American National Standards Institute) adalah organisasi nirlaba swasta yang mengawasi pengembangan standar yang disetujui secara sukarela untuk produk, layanan, proses, sistem, dan personel di Amerika Serikat. Tujuan Standar ANSI…
  • Daftar Standar IEEE part 19-20 Daftar Standar IEEE part 19-20 adalah kumpulan judul standar IEEE dengan lingkup : Software and Systems Engineering, Transportation. Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi IEEE, yang penamaan…
  • ISO IEC IEEE 15026-1 Bibliografi ISO IEC IEEE 15026-1 Bibliografi adalah Daftar Pustaka Standar Internasional mengenai systems and software engineering atau sistem dan rekayasa perangkat lunak, khususnya tentang systems and software assurance part 1: concepts…
  • Standar Electrical Engineer Electrical Engineer merupakan salah satu profesi yang populer dan banyak dibutuhkan khususnya di bidang teknik, nah apa sajakah standar untuk menjadi seorang Electrical Engineer? Definisi Electrical Engineer Secara bahasa, istilah…
  • Daftar Standar IEEE Power and Energy 1 Daftar Standar IEEE Power and Energy 1 adalah kumpulan judul standar IEEE dengan lingkup : Power and Energy sub part 1. Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi…
  • Daftar Standar IEEE Power and Energy 6 Daftar Standar IEEE Power and Energy 6 adalah kumpulan judul standar IEEE dengan lingkup : Power and Energy sub part 6. Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi…
  • Organisasi Standar ASTM ASTM atau American Standard Testing and Material adalah sebuah organisasi dunia yang mengembangkan standardisasi teknik untuk material, produk, sistem dan jasa. Organisasi standardisasi internasional yang bersifat sukarela ini berpusat di…
  • ISO IEC 11801-1:2017 Klausa 3.1.7 - 3.1.87 ISO IEC 11801-1:2017 Klausa 3.1.7 - 3.1.87 adalah Standar Internasional mengenai Teknologi Informasi, khususnya tentang persyaratan umum pada Generic cabling for customer premises. Artikel ini merupakan lanjutan dari artikel sebelumnya…
  • ISO IEC IEEE 15026-1 Klausa 3.1 - 3.5 ISO IEC IEEE 15026-1 Klausa 3.1 - 3.5 adalah Standar Internasional mengenai systems and software engineering atau sistem dan rekayasa perangkat lunak, khususnya tentang systems and software assurance part 1:…
  • Daftar Standar IEEE Computer Technology Daftar Standar IEEE Computer Technology adalah kumpulan sebagian judul standar IEEE yang diterbitkan oleh organisasi IEEE SA (Standards Association). Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi IEEE, yang…
  • IEEE Standards Association IEEE SA (Standards Association) adalah organisasi pembangun konsensus terkemuka yang memelihara, mengembangkan, dan memajukan teknologi global, melalui IEEE Merupakan organisasi profesi yang terdiri dari para ahli bidang teknik yang mempromosikan…
  • ISO IEC 15776 VME64bus Specification ISO IEC 15776 adalah Standar Internasional mengenai VME64bus Specification, yang mendefinisikan sistem antarmuka yang digunakan untuk menghubungkan mikroprosesor, penyimpanan data, dan perangkat kontrol periferal. Standar versi terbaru yang masih berlaku…
  • ISO IEC 15026-1 IEEE notices-abstract ISO IEC IEEE 15026-1 IEEE notices and abstract adalah bagian dari Standar Internasional mengenai systems and software engineering atau sistem dan rekayasa perangkat lunak, khususnya tentang systems and software assurance…

Leave a Comment