Daftar Standar ISO 500-699 adalah kumpulan judul dari Standar nomor ISO 500 hingga ISO 699 yang diterbitkan oleh badan ISO Internasional.
Mengenai Standar ISO
ISO (International Organization for Standardization) adalah suatu organisasi atau lembaga nirlaba internasional, yang bertujuan untuk membuat dan memperkenalkan standar dan standardisasi internasional untuk berbagai tujuan.
ISO telah mengembangkan lebih dari 23,755 Standar Internasional dan semuanya tercantum di dalam katalog Standar ISO.
Isi dari standar ISO ini dilindungi oleh hak cipta dan sebagian besar harus melakukan proses pembelian untuk dapat mengakses keseluruhan isinya.
Namun ada sekitar 300 standar yang diproduksi oleh ISO dan IEC Joint Technical Committee (JTC1) telah dinyatakan bersifat bebas dan tersedia untuk umum.
Lebih jelas mengenai Standar ISO dan Badan ISO dapat dibaca pada artikel lain dari standarku.com berikut :
Standar Kerjasama
Didalam daftar standar ISO juga terdapat standar lain hasil kerjasama badan standardisasi lain dengan standar ISO seperti :
- IEC (International Electrotechnical Commission)
- IWA (International Workshop Agreement)
IEC adalah organisasi standardisasi internasional yang menyusun dan menerbitkan standar-standar internasional untuk seluruh bidang elektrik, elektronik dan teknologi yang terkait atau bidang teknologi elektro (electrotechnology).
Lebih jelas mengenai IEC dapat dibaca pada artikel lain dari standarku.com berikut :
IWA adalah dokumen ISO yang dihasilkan bukan melalui proses komite teknis ISO secara penuh, namun melalui workshop meeting.
Pelaku pasar dan pemangku kepentingan lainnya dapat berpartisipasi langsung dalam mengembangkan IWA dan tidak harus melalui delegasi nasional.
Ini adalah cara cepat untuk mendapatkan dokumen ISO yang diakui, prosesnya tidak boleh memakan waktu total lebih dari 12 bulan.
Prosesnya dirancang agar fleksibel dan sebagian besar diputuskan oleh organisasi yang mengajukan.
Daftar Standar ISO 500-699
Keseluruhan Daftar Standar ISO adalah dari ISO 1 hingga ISO 99999, namun terlalu panjang untuk ditampilkan semua pada halaman ini.
Untuk itu kami telah membaginya menjadi beberapa postingan, yang dimulai pada postingan sebelumnya berikut :
Selanjutnya pada postingan kali ini akan menampilkan Standar ISO seri ISO 500 hingga ISO 699.
Daftar Standar ISO 500 – ISO 549
ISO 500 Agricultural tractors — Rear-mounted power take-off types 1, 2, 3 and 4[Note 3]
ISO 501:2012 Hard coal — Determination of the crucible swelling number
ISO 502:2015 Coal — Determination of caking power — Gray-King coke test
ISO 504:1975 Turning tools with carbide tips — Designation and marking
ISO 505:2017 Conveyor belts — Method for the determination of the tear propagation resistance of textile conveyor belts
ISO 506:2020 Rubber latex, natural, concentrate — Determination of volatile fatty acid number
ISO 510:1977 Red lead for paints
ISO 513:2012 Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application
ISO 514:2014 Turning tools with carbide tips — Internal tools
ISO 516:2019 Camera shutters — Timing — General definition and mechanical shutter measurements
ISO 517:2008 Photography — Apertures and related properties pertaining to photographic lenses — Designations and measurements
ISO 518:2006 Photography — Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units — Specification
ISO 519:1992 Photography — Hand-held cameras — Flash-connector dimensions
ISO 520:2010 Cereals and pulses — Determination of the mass of 1 000 grains
ISO 521:2011 Machine chucking reamers with cylindrical shanks and Morse taper shanks
ISO 522:1975 Special tolerances for reamers
ISO 525:2020 Bonded abrasive products — Shape types, designation and marking
ISO 527 Plastics — Determination of tensile properties
ISO 527-1:2019 Part 1: General principles
ISO 527-2:2012 Part 2: Test conditions for moulding and extrusion plastics
ISO 527-3:2018 Part 3: Test conditions for films and sheets
ISO 527-4:1997 Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
ISO 527-5:2009 Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
ISO 528:1983 Refractory products — Determination of pyrometric cone equivalent (refractoriness)
ISO 529:2017 Short machine taps and hand taps
ISO 530:1975 Aircraft — General purpose push-pull single-pole circuit-breakers — Dimensions
ISO 532 Acoustics — Methods for calculating loudness
ISO 532-1:2017 Part 1: Zwicker method
ISO 532-2:2017 Part 2: Moore-Glasberg method
ISO 534:2011 Paper and board — Determination of thickness, density and specific volume
ISO 535:2014 Paper and board — Determination of water absorptiveness — Cobb method
ISO 536:2019 Paper and board — Determination of grammage
ISO 540:2008 Hard coal and coke — Determination of ash fusibility
ISO 542:1990 Oilseeds — Sampling
ISO 544:2017 Welding consumables — Technical delivery conditions for filler materials and fluxes — Type of product, dimensions, tolerances and markings
ISO 548:1981 Manganese ores — Determination of barium oxide content — Barium sulphate gravimetric method
ISO 549:1981 Manganese ores — Determination of combined water content — Gravimetric method
Daftar Standar ISO 550 – ISO 599
ISO 554:1976 Standard atmospheres for conditioning and/or testing — Specifications
ISO 556:2020 Coke (greater than 20 mm in size) — Determination of mechanical strength
ISO 558:1980 Conditioning and testing — Standard atmospheres — Definitions
ISO 561:1989 Coal preparation plant — Graphical symbols
ISO 562:2010 Hard coal and coke — Determination of volatile matter
ISO 565:1990 Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
ISO 567:1995 Coke — Determination of bulk density in a small container
ISO 570:1982 Textile machinery and accessories — Heald carrying rods for healds with closed “O”-shaped end loops
ISO 579:2013 Coke — Determination of total moisture
ISO 580:2005 Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating
ISO/TR 581:2005 Weldability — Metallic materials — General principles
ISO 582:1995 Rolling bearings — Chamfer dimensions — Maximum values
ISO 583:2007 Conveyor belts with a textile carcass — Total belt thickness and thickness of constitutive elements — Test methods
ISO 584:1982 Plastics — Unsaturated polyester resins — Determination of reactivity at 80 degrees C (conventional method)
ISO 585:1990 Plastics — Unplasticized cellulose acetate — Determination of moisture content
ISO 587:2020 Coal and coke — Determination of chlorine using Eschka mixture
ISO 589:2008 Hard coal — Determination of total moisture
ISO 591 Titanium dioxide pigments for paints
ISO 591-1:2000 Part 1: Specifications and methods of test
ISO 592:1998 Essential oils — Determination of optical rotation
Daftar Standar ISO 600 – ISO 649
ISO 602:2015 Coal — Determination of mineral matter
ISO 603 Bonded abrasive products — Dimensions
ISO 603-1:1999 Part 1: Grinding wheels for external cylindrical grinding between centres
ISO 603-2:1999 Part 2: Grinding wheels for centreless external cylindrical grinding
ISO 603-3:1999 Part 3: Grinding wheels for internal cylindrical grinding
ISO 603-4:1999 Part 4: Grinding wheels for surface grinding/peripheral grinding
ISO 603-5:1999 Part 5: Grinding wheels for surface grinding/face grinding
ISO 603-6:1999 Part 6: Grinding wheels for tool and tool room grinding
ISO 603-7:1999 Part 7: Grinding wheels for manually guided grinding
ISO 603-8:1999 Part 8: Grinding wheels for deburring and fettling/snagging
ISO 603-9:1999 Part 9: Grinding wheels for high-pressure grinding
ISO 603-10:1999 Part 10: Stones for honing and superfinishings
ISO 603-11:1999 Part 11: Hand finishing sticks
ISO 603-12:1999 Part 12: Grinding wheels for deburring and fettling on a straight grinder
ISO 603-13:1999 Part 13: Grinding wheels for deburring and fettling on a vertical grinder
ISO 603-14:1999 Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder
ISO 603-15:1999 Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines
ISO 603-16:1999 Part 16: Grinding wheels for cutting-off on hand held power tools
ISO 603-17:2014 Part 17: Spindle mounted wheels (ISO type 52)
ISO 603-18:2013 Part 18: Grinding wheels for flat glass edge grinding machines
ISO 604:2002 Plastics — Determination of compressive properties
ISO 605:1991 Pulses — Determination of impurities, size, foreign odours, insects, and species and variety — Test methods
ISO 606:2015 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
ISO 607:1980 Surface active agents and detergents — Methods of sample division
ISO 609:1996 Solid mineral fuels — Determination of carbon and hydrogen — High temperature combustion method
ISO 610:1990 High-tensile steel chains (round link) for chain conveyors and coal ploughs
ISO 611:2003 Road vehicles — Braking of automotive vehicles and their trailers — Vocabulary
ISO 612:1978 Road vehicles — Dimensions of motor vehicles and towed vehicles — Terms and definitions
ISO 614:2012 Ships and marine technology — Toughened safety glass panes for rectangular windows and side scuttles — Punch method of non-destructive strength testing
ISO 616:1995 Coke — Determination of shatter indices
ISO 619:1981 Manganese ores — Determination of chromium content — Diphenylcarbazide photometric method and silver persulphate titrimetric method
ISO 622:2016 Solid mineral fuels — Determination of phosphorus content — Reduced molybdophosphate photometric method
ISO 625:1996 Solid mineral fuels — Determination of carbon and hydrogen — Liebig method
ISO 629:1982 Steel and cast iron — Determination of manganese content — Spectrophotometric method
ISO 630 Structural steels
ISO 630-1:2011 Part 1: General technical delivery conditions for hot-rolled products
ISO 630-2:2011 Part 2: Technical delivery conditions for structural steels for general purposes
ISO 630-3:2012 Part 3: Technical delivery conditions for fine-grain structural steels
ISO 630-4:2012 Part 4: Technical delivery conditions for high-yield-strength quenched and tempered structural steel plates
ISO 630-5:2014 Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
ISO 630-6:2014 Part 6: Technical delivery conditions for seismic-improved structural steels for building
ISO 631:1975 Mosaic parquet panels — General characteristics
ISO 633:2019 Cork — Vocabulary
ISO 636:2017 Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification
ISO 638:2008 Paper, board and pulps — Determination of dry matter content — Oven-drying method
ISO 639 Codes for the representation of names of languages
ISO 639-1:2002 Part 1: Alpha-2 code
ISO 639-2:1998 Part 2: Alpha-3 code
ISO 639-3:2007 Part 3: Alpha-3 code for comprehensive coverage of languages
ISO 639-4:2010 Part 4: General principles of coding of the representation of names of languages and related entities, and application guidelines
ISO 639-5:2008 Part 5: Alpha-3 code for language families and groups
ISO 639-6:2009 Part 6: Alpha-4 code for comprehensive coverage of language variants [Withdrawn, no replacement]
ISO 641:1975 Laboratory glassware — Interchangeable spherical ground joints
ISO 642:1999 Steel — Hardenability test by end quenching (Jominy test)
ISO 643:2019 Steels — Micrographic determination of the apparent grain size
ISO/IEC 646:1991 Information technology — ISO 7-bit coded character set for information interchange
ISO 647:2017 Brown coals and lignites — Determination of the yields of tar, water, gas and coke residue by low temperature distillation
ISO 648:2008 Laboratory glassware — Single-volume pipettes
ISO 649 Laboratory glassware — Density hydrometers for general purposes
ISO 649-1:1981 Part 1: Specification
ISO 649-2:1981 Part 2: Test methods and use
Daftar Standar ISO 650 – ISO 699
ISO 650:1977 Relative density 60/60 degrees F hydrometers for general purposes
ISO 651:1975 Solid-stem calorimeter thermometers
ISO 652:1975 Enclosed-scale calorimeter thermometers
ISO 653:1980 Long solid-stem thermometers for precision use
ISO 654:1980 Short solid-stem thermometers for precision use
ISO 655:1980 Long enclosed-scale thermometers for precision use
ISO 656:1980 Short enclosed-scale thermometers for precision use
ISO 657 Hot-rolled steel sections
ISO 658:2002 Oilseeds — Determination of content of impurities
ISO 659:2009 Oilseeds — Determination of oil content (Reference method)
ISO 660:2020 Animal and vegetable fats and oils — Determination of acid value and acidity
ISO 661:2003 Animal and vegetable fats and oils — Preparation of test sample
ISO 662:2016 Animal and vegetable fats and oils — Determination of moisture and volatile matter content
ISO 663:2017 Animal and vegetable fats and oils — Determination of insoluble impurities content
ISO 664:2008 Oilseeds — Reduction of laboratory sample to test sample
ISO 665:2020 Oilseeds — Determination of moisture and volatile matter content
ISO 666:2012 Machine tools — Mounting of grinding wheels by means of hub flanges
ISO 668:2020 Series 1 freight containers — Classification, dimensions and ratings
ISO 669:2016 Resistance welding — Resistance welding equipment — Mechanical and electrical requirements
ISO 671:1982 Steel and cast iron — Determination of sulphur content — Combustion titrimetric method
ISO 672:1978 Soaps — Determination of moisture and volatile matter content — Oven method
ISO 673:1981 Soaps — Determination of content of ethanol-insoluble matter
ISO 675:2014 Textiles — Woven fabrics — Determination of dimensional change on commercial laundering near the boiling point
ISO 676:1995 Spices and condiments — Botanical nomenclature
ISO 677:1976 Straight bevel gears for general engineering and heavy engineering — Basic rack
ISO 678:1976 Straight bevel gears for general engineering and heavy engineering — Modules and diametral pitches
ISO 679:2009 Cement — Test methods — Determination of strength
ISO 683 Heat-treatable steels, alloy steels and free-cutting steels
ISO 683-1:2016 Part 1: Non-alloy steels for quenching and tempering
ISO 683-2:2016 Part 2: Alloy steels for quenching and tempering
ISO 683-3:2019 Part 3: Case-hardening steels
ISO 683-4:2016 Part 4: Free-cutting steels
ISO 683-5:2017 Part 5: Nitriding steels
ISO 683-14:2004 Part 14: Hot-rolled steels for quenched and tempered springs
ISO 683-15:1992 Part 15: Valve steels for internal combustion engines
ISO 683-17:2014 Part 17: Ball and roller bearing steels
ISO 683-18:2014 Part 18: Bright steel products
ISO 684:1974 Analysis of soaps — Determination of total free alkali
ISO 685:2020 Analysis of soaps — Determination of total alkali content and total fatty matter content
ISO 687:2010 Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample
ISO 690:2010 Information and documentation — Guidelines for bibliographic references and citations to information resources
ISO 691:2005 Assembly tools for screws and nuts — Wrench and socket openings — Tolerances for general use
ISO 692:1982 Pulps — Determination of alkali solubility
ISO 693:1982 Dimensions of seam welding wheel blanks
ISO 695:1991 Glass — Resistance to attack by a boiling aqueous solution of mixed alkali — Method of test and classification
ISO 696:1975 Surface active agents — Measurement of foaming power — Modified Ross-Miles method
ISO 697:1981 Surface active agents — Washing powders — Determination of apparent density — Method by measuring the mass of a given volume
ISO 699:2015 Pulps — Determination of alkali resistance
Update Daftar
Untuk daftar lengkap dan terbaru dari semua standar ISO setiap saat, bisa dilihat pada katalog ISO di web resmi ISO international berikut :
https://www.iso.org/standards-catalogue/browse-by-ics.html
Demikian artikel dari standarku.com mengenai Daftar Standar ISO 500-699.
Mohon saran dari pembaca untuk kelengkapan isi artikel ini, silahkan saran tersebut dapat disampaikan melalui kolom komentar.
Baca artikel lain :
- Daftar Standar ISO (ISO 1-99)
- Daftar Standar ISO 100-199
- Daftar Standar ISO 200-499
- Daftar Standar ANSI IBR
- Daftar Standar IEC
Sumber referensi :