Daftar Standar IEEE Power and Energy 1

Daftar Standar IEEE Power and Energy 1 adalah kumpulan judul standar IEEE dengan lingkup : Power and Energy sub part 1.

Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi IEEE, yang penamaan nya diawali dengan kode “IEEE”.

IEEE SA (Standards Association) adalah organisasi pembangun konsensus terkemuka yang memelihara, mengembangkan, dan memajukan teknologi global, melalui IEEE.

Artikel ini adalah lanjutan dari artikel sebelumnya dari standarku.com mengenai organisasi IEEE SA berikut :

Jadi artikel ini ditujukan untuk membantu pembaca dalam mencari apa saja judul standar IEEE yang dibutuhkan.

Untuk mempermudah pencarian judul standar, disini kami cantumkan pembagian berdasarkan klasifikasi berikut.

Klasifikasi Standar IEEE

Standar IEEE dibagi menjadi 21 klasifikasi sebagaimana berikut :

  1. Aerospace Electronics
  2. Antennas and Propagation
  3. Batteries
  4. Blockchain
  5. Communications
  6. Computer Technology
  7. Consumer Electronics
  8. Electromagnetic Compatibility
  9. Green and Clean Technology
  10. Healthcare IT
  11. Industry Applications
  12. Instrumentation and Measurement
  13. Nanotechnology
  14. National Electrical Safety Code (NESC)
  15. Nuclear Power
  16. Power and Energy
  17. Power Electronics
  18. Smart Grid
  19. Software and Systems Engineering
  20. Transportation
  21. Wired and Wireless Communications

Dikarenakan standar IEEE sangat banyak jumlahnya, maka akan dibagi menjadi beberapa artikel seri Daftar Standar IEEE.

Pada artikel sebelumnya mencakup kategori yang pertama hingga ke 15 sebagaimana berikut :

Pada artikel kali ini mencakup kategori yang ke 16 (part 16) yakni : Power and Energy.

Kategori Power and Energy memiliki jumlah standar yang sangat banyak, oleh karena itu kami bagi lagi menjadi beberapa sub part artikel.

Artikel ini merupakan sebagian daftar judul dari kategori Power and Energy untuk sub part 1.

Kategori lain akan dilanjutkan pada artikel dari standarku.com berikutnya.

Kolaborasi Organisasi Pengembang Standar

Pada beberapa judul artikel di kategori ini ada yang merupakan hasil kolaborasi antara IEEE dengan organisasi pengembang standar lain seperti :

  • ISO (International Organization for Standardization), adalah suatu organisasi atau lembaga nirlaba internasional, yang bertujuan untuk membuat dan memperkenalkan standar dan standardisasi internasional untuk berbagai tujuan.
  • IEC, adalah organisasi standardisasi internasional yang menyusun dan menerbitkan standar-standar internasional untuk seluruh bidang elektrik, elektronik dan teknologi yang terkait atau bidang teknologi elektro (electrotechnology).
  • ANSI (American National Standards Institute), adalah organisasi nirlaba swasta yang mengawasi pengembangan standar yang disetujui secara sukarela untuk produk, layanan, proses, sistem, dan personel di Amerika Serikat.

Seperti yang ditunjukkan pada judul dengan kode awalan nama gabungan sebagaimana berikut :

  • IEEE/IEC
  • IEEE/ISO/IEC
  • IEEE/ISO
  • IEEE/ANSI
  • ANSI/AAMI
  • IEEE/AIEE

Lebih jelas mengenai organisasi pengembang standar lain diatas dapat dibaca pada artikel lain dari standarku.com berikut :

Daftar Standar IEEE

Berikut adalah judul standar-standar IEEE part 16 yang dikutip dari ieee.org per 25 Agustus 2021 :

Daftar Standar IEEE Power and Energy 1

  • IEEE 802.1Q-2005 – IEEE Standard for Local and Metropolitan Area Networks—Virtual Bridged Local Area Networks
  • IEEE 11073-10419 – IEEE Draft International Standard – Health informatics- Personal health device communication- Part 10419: Device Specialization- Insulin Pump
  • IEEE 802.3at-2009 – IEEE Standard for Information technology– Local and metropolitan area networks– Specific requirements– Part 3: CSMA/CD Access Method and Physical Layer Specifications Amendment 3: Data Terminal Equipment (DTE) Power via the Media Dependent Interface (MDI) Enhancements
  • IEEE 802.3bk-2013 – IEEE Standard for Ethernet – Amendment 1: Physical Layer Specifications and Management Parameters for Extended Ethernet Passive Optical Networks
  • IEEE 802.15.4n-2016 – IEEE Standard for Low-Rate Wireless Networks — Amendment 1: Physical Layer Utilizing China Medical Bands
  • IEEE 802.16n-2013 – IEEE Standard for Air Interface for Broadband Wireless Access Systems–Amendment 2: Higher Reliability Networks
  • IEEE 528-2001 – IEEE Standard for Inertial Sensor Terminology
  • IEEE 529-1980 – Supplement for Strapdown Applications to IEEE Standard Specification Format Guide and Test Procedure for Single-Degree-of-Freedom Rate-Integrating Gyros
  • IEEE 583-1982 – IEEE Standard Modular Instrumentation and Digital Interface System (CAMAC) (Computer Automated Measurement and Control)
  • IEEE 430-2017 – IEEE Standard Procedures for the Measurement of Radio Noise from Overhead Power Lines and Substations
  • IEEE 539-2005 – IEEE Standard Definitions of Terms Relating to Corona and Field Effects of Overhead Power Lines
  • IEEE C135.61-1997 – IEEE Standard for the Testing of Overhead Transmission and Distribution Line Hardware
  • IEEE C135.90-2014 – IEEE Standard for Pole Line Hardware for Overhead Line Construction
  • IEEE 1835-2014 – NACE International and IEEE Joint Standard Practice for Atmospheric (Above Grade) Corrosion Control of Existing Electric Transmission, Distribution, and Substation Structures by Coating Systems
  • IEEE C135.2-1999 – IEEE Standard for Threaded Zinc-Coated Ferrous Strand-Eye Anchor Rods and Nuts for Overhead Line Construction
  • IEEE C135.3-2001 – IEEE Standard for Zinc-Coated Ferrous Lag Screws for Overhead Line Construction
  • IEEE C135.62-2009 – IEEE Standard for Zinc-Coated Forged Anchor Shackles
  • IEEE C135.80-2012 – IEEE Standard for Fasteners for Overhead Line Construction
  • IEEE 644-2019 – IEEE Standard Procedures for Measurement of Power Frequency Electric and Magnetic Fields from AC Power Lines
  • IEEE 644-2019 – IEEE Standard Procedures for Measurement of Power Frequency Electric and Magnetic Fields from AC Power Lines
  • IEEE C135.20-1998 – IEEE Standard for Zinc-Coated Ferrous Insulator Clevises for Overhead Line Construction
  • IEEE C135.63-1998 – IEEE Standard for Shoulder Live Line Extension Links for Overhead Line Construction
  • IEEE C135.80-2012/Cor 1-2020 – IEEE Standard for Fasteners for Overhead Line Construction – Corrigendum 1: Table 5 Corrections
  • IEEE 1222-2019 – IEEE Standard for Testing and Performance for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable for Use on Electric Utility Power Lines
  • IEEE 1222-2019 – IEEE Standard for Testing and Performance for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable for Use on Electric Utility Power Lines
  • IEEE 1591.3-2020 – IEEE Standard for Qualifying Hardware for Helically-Applied Fiber Optic Cable System (WRAP Cable)
  • IEEE 1594-2008 – IEEE Standard for Helically Applied Fiber Optic Cable Systems (Wrap Cable) for Use on Overhead Utility Lines
  • IEEE C62.33-1982 – IEEE Standard Test Specifications for Varistor Surge-Protective Devices
  • IEEE C62.35-1987 – IEEE Standard Test Specifications for Avalanche Junction Semiconductor Surge Protective Devices
  • IEEE C57.12.00-2000 – IEEE Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
  • IEEE C57.12.00-2006 – IEEE Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
  • IEEE C57.12.10-2010 – IEEE Standard Requirements for Liquid-Immersed Power Transformers
  • IEEE C57.12.10-2017 – IEEE Standard Requirements for Liquid-Immersed Power Transformers
  • IEEE/IEC 60079-30-1-2015 – IEC/IEEE International Standard – Explosive atmospheres — Part 30-1: Electrical resistance trace heating — General and testing requirements
  • IEEE 1138-2009/Cor 1-2014 – IEEE Standard for Testing and Performance for Optical Ground Wire (OPGW) Use on Electric Utility Power Lines — Corrigendum 1: Stress-Strain Temperature Correction, Aeolian Vibration Velocity
  • IEEE C57.12.10-2010/Cor 2-2013 – IEEE Standard Requirements for Liquid-Immersed Power Transformers — Corrigendum 2: Correction of A.3.2.13 Autotransformer LTC application considerations
  • IEEE/NACE 1895-2014 – NACE International and IEEE Joint Standard Practice for Below-Grade Inspection and Assessment of Corrosion on Steel Transmission, Distribution, and Substation Structures
  • IEEE 1839-2014 – NACE International and IEEE Joint Standard Practice for Below-Grade Corrosion Control of Transmission, Distribution, and Substation Structures by Coating Repair Systems
  • IEEE C62.11-1987 – IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits
  • IEEE C62.11-1993 – IEEE Standard for Metal-Oxide Surge Arresters for Alternating Current Power Circuits
  • IEEE C62.11-1999 – IEEE Standard for Metal-Oxide Surge Arresters for Alternating Current Power Circuits (>1KV)
  • IEEE C57.12.10-2010/Cor 1-2012 – IEEE Standard Requirements for Liquid-Immersed Power Transformers–Corrigendum 1: Correction of 5.1.9–Sudden Pressure Relay
  • IEEE C37.11-1997 – IEEE Standard Requirements for Electrical Control for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C62.59-2019 – IEEE Standard for Test Methods and Preferred Values for Silicon PN-Junction Clamping Diodes
  • IEEE/IEC 60079-30-2-2015 – IEEE/IEC International Standard for Explosive atmospheres — Part 30-2: Electrical resistance trace heating — Application guide for design, installation and maintenance
  • IEEE/IEC 80005-2-2016 – IEC/IEEE International Standard – Utility connections in port — Part 2: High and low voltage shore connection systems — Data communication for monitoring and control
  • IEEE 338-1987 – IEEE Standard Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems
  • IEEE 1293-1998/Cor 1-2008 – IEEE Standard Specification Format Guide and Test Procedure for Linear,Single-Axis, Nongyroscopic Accelerometers Corrigendum 1: Changes to Annex K and Annex L
  • IEEE 383-2003 – IEEE Standard for Qualifying Class 1E Electric Cables and Field Splices for Nuclear Power Generating Stations
  • IEEE 515-2011 – IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial Applications
  • IEEE 515-2017 – IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial Applications
  • IEEE 762-1987 – IEEE Standard Definitions for Use in Reporting Electric Generating Unit Reliability, Availability, and Productivity
  • IEEE C57.12.00-2010 – IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
  • IEEE C57.12.00-2015 – IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
  • IEEE C62.32-1981 – IEEE Standard Test Specifications for Low-Voltage Air Gap Surge-Protective Devices (Excluding Valve and Expulsion Type Devices)
  • IEEE C62.33-2016 – IEEE Standard for Test Methods and Performance Values for Metal-Oxide Varistor Surge Protective Components
  • IEEE C62.35-2010 – IEEE Standard Test Methods for Avalanche Junction Semiconductor Surge-Protective Device Components
  • IEEE C62.69-2016 – IEEE Standard for the Surge Parameters of Isolating Transformers Used in Networking Devices and Equipment
  • IEEE 1641.1-2013 – IEEE Guide for the Use of IEEE Std 1641, IEEE Standard for Signal and Test Definition
  • IEEE C57.12.34-2004 – Standard for Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase DistributionTransformers, 2500 kVA and Smaller: High-Voltage, 34 500GrdY/19 920 Volts and Below; Low Voltage, 480 Volts and Below
  • IEEE C62.32-2004 – IEEE Standard Test Methods for Low-Voltage Air Gap Surge-Protective Device Components (Excluding Valve and Expulsion Types)
  • IEEE C62.64-1997 – IEEE Standard Specifications for Surge Protectors Used in Low-Voltage Data, Communications, and Signaling Circuits
  • IEEE C62.31-1987 – IEEE Standard Test Specification for Gas-Tube Surge Protective Devices
  • IEEE 4-1995 – IEEE Standard Techniques for High-Voltage Testing
  • IEEE 4-2013 – IEEE Standard for High-Voltage Testing Techniques
  • IEEE 572-2019 – IEEE Standard for Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations and Other Nuclear Facilities
  • IEEE 844.2/CSA C293.2-2017 – IEEE/CSA Standard for Skin Effect Trace Heating of Pipelines, Vessels, Equipment, and Structures–Application Guide for Design, Installation, Testing, Commissioning, and Maintenance
  • IEEE C37.100.1-2007 – IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V
  • IEEE C62.31-2020 – IEEE Standard for Test Methods and Preferred Values for Low-Voltage Gas Discharge Tube Surge-Protective Components
  • IEEE/CSA 844.1/CSA C22.2 No.293.1-2017 – IEEE/CSA Standard for Skin Effect Trace Heating of Pipelines, Vessels, Equipment, and Structures – General, Testing, Marking, and Documentation Requirements
  • IEEE 1671.1-2009 – IEEE Standard for Automatic Test Markup Language (ATML) for Exchanging Automatic Test Equipment and Test Information via XML: Exchanging Test Descriptions
  • IEEE C62.36-1991 – IEEE Standard Test Methods for Surge Protectors Used in Low-Voltage Data, Communications, and Signaling Circuits
  • IEEE C62.36-1994 – IEEE Standard Test Methods for Surge Protectors Used in Low-Voltage Data, Communications, and Signaling Circuits
  • IEEE C62.36-2000 – IEEE Standard Test Methods for Surge Protectors Used in Low-Voltage Data, Communications, and Signaling Circuits
  • IEEE 1826-2012 – IEEE Standard for Power Electronics Open System Interfaces in Zonal Electrical Distribution Systems Rated Above 100 kW
  • IEEE 1826-2012 – IEEE Standard for Power Electronics Open System Interfaces in Zonal Electrical Distribution Systems Rated Above 100 kW
  • IEEE 2030.102.1-2020 – IEEE Standard for Interoperability of Internet Protocol Security (IPsec) Utilized within Utility Control Systems
  • IEEE 465.1-1977 – IEEE Standard Test Specifications for Gas Tube Surge Protecting Devices
  • IEEE C37.013-1997 – IEEE Standard for AC High-Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.60-1981 – IEEE Standard Requirements for Overhead, Pad Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for AC Systems
  • IEEE C37.60-2003/Cor 1-2004-2004 – IEEE Standard Requirements for Overhead Pad-Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV–Corrigendum 1
  • IEEE C57.12.37-2006 – IEEE Standard for the Electronic Reporting of Distribution Transformer Test Data
  • IEEE C57.13.5-2003 – IEEE Standard of Performance and Test Requirements of Instrument Transformers of a Nominal Voltage of 115 kV and Above
  • IEEE C62.11-2020 – IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV)
  • IEEE/IEC 80005-1-2019 – IEC/IEEE International Standard – Utility connections in port — Part 1: High voltage shore connection (HVSC) systems — General requirements
  • IEEE 2600.3-2009 – IEEE Standard Protection Profile for Hardcopy Devices in IEEE Std 2600-2008 Operational Environment C
  • IEEE 2600.4-2010 – IEEE Standard Protection Profile for Hardcopy Devices in IEEE Std 2600(TM)-2008 Operational Environment D
  • IEEE 487.2-2013 – IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations through the Use of Optical Fiber Systems
  • IEEE 487.4-2013 – IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Neutralizing Transformers
  • IEEE 487.5-2013 – IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Isolation Transformers
  • IEEE 572-1985 – Standard for Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations
  • IEEE 738-2012 – IEEE Standard for Calculating the Current-Temperature Relationship of Bare Overhead Conductors
  • IEEE C37.11-2014 – IEEE Standard Requirements for Electrical Control for AC High-Voltage (>1000 V) Circuit Breakers
  • IEEE C57.12.38-2009 – IEEE Standard for Pad-Mounted-Type, Self-Cooled, Single-Phase Distribution Transformers; High Voltage, 34 500 GrdY/19 920 V and Below, Low Voltage, 240/120 V; 167 kVA and Smaller
  • IEEE C57.12.38-2014 – IEEE Standard for Pad-Mounted-Type, Self-Cooled, Single-Phase Distribution Transformers 250 kVA and Smaller: High Voltage, 34 500 GrdY/19 920 V and Below; Low Voltage, 480/240 V and Below
  • IEEE C57.12.90-2006 – IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers
  • IEEE C57.13.2-1991 – IEEE Standard Conformance Test Procedures for Instrument Transformers
  • IEEE C57.13.5-2009 – IEEE Standard of Performance and Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above
  • IEEE C57.13.5-2019 – IEEE Standard for Performance and Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above
  • IEEE C62.31-2006 – IEEE Standard Test Methods for Low-Voltage Gas-Tube Surge-Protective Device Components
  • IEEE/ANSI C37.1-1987 – IEEE Standard Definition, Specification, and Analysis of Systems Used for Supervisory Control, Data Acquisition, and Automatic Control
  • IEEE/IEC 62271-37-013-2015 – IEEE/IEC International Standard for High-voltage switchgear and controlgear — Part 37-013: Alternating-current generator circuit-breakers
  • IEEE/IEC 62271-37-013-2015/Cor 1-2017 – IEEE/IEC International Standard for high-voltage switchgear and controlgear – Part 37-013: Alternating current generator circuit-breakers: Corrigendum 1
  • IEEE C37.40-1981 – American National Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
  • IEEE C37.40-1993 – IEEE Standard Service Conditions and Definitions for High Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches & Accessories
  • IEEE 1613-2003 – IEEE Standard Environmental and Testing Requirements for Communications Networking Devices in Electric Power Substations
  • IEEE 1613-2009 – IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Electric Power Substations
  • IEEE 1647-2006 – IEEE Standard for the Functional Verification Language ‘e’
  • IEEE 390-1975 – IEEE Standard for Low Power Pulse Transformers
  • IEEE 404-2000 – IEEE Standard for Extruded and Laminated Dielectric Shielded Cable Joints Rated 2500-500 000V
  • IEEE 404-2006 – IEEE Standard for Extruded and Laminated Dielectric Shielded Cable Joints Rated 2 500v to 500 000v
  • IEEE 404-2012 – IEEE Standard for Extruded and Laminated Dielectric Shielded Cable Joints Rated 2.5 kV to 500 kV
  • IEEE 738-1986 – IEEE Standard for Calculation of Bare Overhead Conductor Temperature and Ampacity Under Steady-State Conditions
  • IEEE 841-2001 – IEEE Standard for Petroleum and Chemical Industry – Severe Duty Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors – Up to and Including 370 kW (500 hp)
  • IEEE C37.20.3-2001 – IEEE Standard for Metal-Enclosed Interrupter Switchgear
  • IEEE C57.12.70-2011 – IEEE Standard for Standard Terminal Markings and Connections for Distribution and Power Transformers
  • IEEE C57.12.70-2020 – IEEE Standard for Standard Terminal Markings and Connections for Distribution and Power Transformers
  • IEEE C57.13-1993 – IEEE Standard Requirements for Instrument Transformers
  • IEEE C62.36-2014 – IEEE Standard Test Methods for Surge Protectors Used in Low-Voltage Data, Communications, and Signaling Circuits
  • IEEE/ANSI C37.53.1-1989 – American National Standard High-Voltage Current-Limiting Motor-Starter Fuses — Conference Test Procedures
  • IEEE/ASA C16.31-1959 – ASA American Standard Method of Measurement of Television Luminance Signal Levels
  • IEEE C37.74-2003 – IEEE Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up to 38 kV
  • IEEE C57.13-1978 – IEEE Standard Requirements for Instrument Transformers
  • IEEE 1313.1-1996 – IEEE Standard for Insulation Coordination – Definitions, Principles and Rules
  • IEEE 15288.2-2014 – IEEE Standard for Technical Reviews and Audits on Defense Programs
  • IEEE 2400-2016 – IEEE Standard for Wind Turbine Aero Acoustic Noise Measurement Techniques
  • IEEE 501-1978 – IEEE Standard Seismic Testing of Relays
  • IEEE 738-2012/Cor 1-2013 – IEEE Approved Draft Standard for Calculating the Current-Temperature Relationship of Bare Overhead Conductors – Corrigendum 1
  • IEEE 820-2006 – IEEE Standard Telephone Loop Performance Characteristics
  • IEEE C37.100.5-2018 – IEEE Standard for Definitions of High-Voltage Circuit Breakers Above 1000 Vac and 3200 Vdc, and Reclosers and Other Distribution Equipment from 1000 Vac to 38 000 Vac
  • IEEE C37.13.1-2006 – IEEE Standard for Definite Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear
  • IEEE C37.17-2012 – IEEE Standard for Trip Systems for Low-Voltage (1000 V and below) AC and General Purpose (1500 V and below) DC Power Circuit Breakers
  • IEEE C57.12.31-2010/Cor 1-2014 – IEEE Standard for Pole-Mounted Equipment–Enclosure Integrity – Corrigendum 1: Correction to the SCAB Corrosion Test in 4.5.6
  • IEEE C57.12.39-2017 – IEEE Standard for Requirements for Distribution Transformer Tank Pressure Coordination
  • IEEE C57.12.70-2000 – IEEE Standard Terminal Markings and Connections for Distribution and Power Transformers
  • IEEE C57.16-1996 – IEEE Standard Requirements, Terminology, and Test Code for Dry-Type Air-Core Series-Connected Reactors
  • IEEE/ANSI C93.3-1995 – American National Standard–Requirements for Power-Line Carrier Line Traps
  • IEEE 1613a-2008 – IEEE Standard Environmental and Testing Requirements for Communications Networking Devices in Electric Power Substations Amendment 1: Add Requirements for Altitude and Altitude Derating Factors
  • IEEE 1613a-2011 – IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Electric Power Substations Amendment 1: Adding of one definition, DC power supply requirements (5.1), and Annex E- History
  • IEEE C37.66-2005 – IEEE Standard Requirements for Capacitor Switches for AC Systems (1 kV to 38 kV)
  • IEEE C37.60-2003 – IEEE Standard Requirements for Overhead, Pad Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for alternating current systems up to 38 kV
  • IEEE 1004-1987 – IEEE Standard Definitions of Planar Transmission Lines
  • IEEE 1210-2004 – IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable
  • IEEE 1210-2004/Cor 1-2014 – IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants with Wire and Cable – Corrigendum 1
  • IEEE 1210-2005 – IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable
  • IEEE 341-1972 – IEEE Standard Requirements for Capacitance Current Switching for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE 539-2020 – IEEE Standard Definitions of Terms Relating to Corona and Field Effects of Overhead Power Lines
  • IEEE 634-2004 – IEEE Standard for Cable-Penetration Fire Stop Qualification Test
  • IEEE 634-2005 – IEEE Standard for Cable-Penetration Fire Stop Qualification Test
  • IEEE C37.016-2006 – IEEE Standard for AC High Voltage Circuit Switchers rated 15.5kV through 245kV
  • IEEE C37.016-2018 – IEEE Standard for AC High Voltage Circuit Switchers Rated 15.5 kV through 245 kV
  • IEEE C37.42-2009 – IEEE Standard Specifications for High-Voltage (> 1000 V) Expulsion-Type Distribution-Class Fuses, Fuse and Disconnecting Cutouts, Fuse Disconnecting Switches, and Fuse Links, and Accessories Used with These Devices
  • IEEE C57.12.37-2015 – IEEE Standard for the Electronic Reporting of Distribution Transformer Test Data
  • IEEE C57.12.44-2000 – Standard Requirements for Secondary Network Protectors
  • IEEE C57.19.03-1996 – IEEE Standard Requirements, Terminology, and Test Code for Bushings for DC Applications
  • IEEE C57.19.03-1996/Cor 1-2005 – IEEE Standard Requirements, Terminology, and Test Code for Bushings for DC Applications – Corrigendum 1
  • IEEE/ANSI C50.10-1977 – American National Standard General Requirements for Synchronous Machines
  • IEEE/ASA C37.1-1950 – ASA American Standard for Relays Associated with Electric Power Apparatus
  • IEEE/ASA C37.19-1963 – ASA American National Standard Safety Requirements for Standard for Low-Voltage AC Power Circuit Breakers and Switchgear Assemblies
  • IEEE 535-2013/Cor 1-2017 – IEEE Standard for Qualification of Class 1E Vented Lead Acid Storage Batteries for Nuclear Power Generating Stations – Corrigenda 1
  • IEEE C37.41-2000 – IEEE Standard Design Tests For High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
  • IEEE C57.12.30-2010 – IEEE Standard for Pole-Mounted Equipment–Enclosure Integrity for Coastal Environments
  • IEEE C57.12.31-2002 – IEEE Standard for Pole Mounted Equipment – Enclosure Integrity
  • IEEE C57.12.31-2010 – IEEE Standard for Pole-Mounted Equipment–Enclosure Integrity
  • IEEE C57.12.38-2014/Cor 1-2016 – IEEE Standard for Pad-Mounted-Type, Self-Cooled, Single-Phase Distribution Transformers 250 kVA and Smaller: High Voltage, 34 500 GrdY/19 920 V and Below; Low Voltage, 480/240 V and Below – Corrigendum 1: Figure 1A
  • IEEE C62.64-2009 – IEEE Standard Specifications for Surge Protectors Used in Low-Voltage Data, Communications,and Signaling Circuits
  • IEEE 310-1969 – IEEE Standard for Reference-Standard Electrical Resistors
  • IEEE 48-2009 – IEEE Standard for Test Procedures and Requirements for Alternating-Current Cable Terminations Used on Shielded Cables Having Laminated Insulation Rated 2.5 kV through 765 kV or Extruded Insulation Rated 2.5 kV through 500 kV
  • IEEE 1068-2009 – IEEE Standard for the Repair and Rewinding of AC Electric Motors in the Petroleum, Chemical, and Process Industries
  • IEEE 1068-2015 – IEEE Standard for the Repair and Rewinding of AC Electric Motors in the Petroleum, Chemical, and Process Industries
  • IEEE 1680.3-2012 – IEEE Standard for Environmental Assessment of Televisions
  • IEEE 841-2009 – IEEE Standard for Petroleum and Chemical Industry–Premium-Efficiency, Severe-Duty, Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors–Up to and Including 370 kW (500 hp)
  • IEEE C37.04-1999 – IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers
  • IEEE C37.1-1994 – IEEE Standard Definition, Specification and Analysis of Systems Used for Supervisory Control, Data Acquisition, and Automatic Control
  • IEEE C37.14-2015 – IEEE Standard for DC (3200 V and below) Power Circuit Breakers Used in Enclosures
  • IEEE C37.2-1987 – IEEE Standard Electrical Power System Device Function Numbers
  • IEEE C37.247-2019 – IEEE Standard for Phasor Data Concentrators for Power Systems
  • IEEE C37.60-2003/Cor 1-2004 – IEEE Standard Requirements for Overhead Pad-Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV–Corrigendum 1
  • IEEE C37.98-2013 – IEEE Standard for Seismic Qualification Testing of Protective Relays and Auxiliaries for Nuclear Facilities
  • IEEE C50.13-2005 – IEEE Standard for Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above
  • IEEE C50.13-2014 – IEEE Standard for Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above
  • IEEE C57.12.34-2009 – IEEE Standard Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers, 5 MVA and Smaller; High Voltage, 34.5 kV Nominal System Voltage and Below; Low Voltage, 15 kV Nominal System Voltage & Below
  • IEEE C57.12.34-2015 – IEEE Standard Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers, 10 MVA and Smaller; High-Voltage, 34.5 kV Nominal System Voltage and Below; Low-Voltage, 15 kV Nominal System Voltage and Below
  • IEEE C57.12.36-2007 – IEEE Standard Requirements for Liquid-Immersed Distribution Substation Transformers
  • IEEE C57.12.80-2002 – IEEE Standard Terminology for Power and Distribution Transformers
  • IEEE C57.12.90-2010 – IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers
  • IEEE C57.12.90-2015 – IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers
  • IEEE C62.62-2000 – IEEE Standard Test Specifications for Surge Protective Devices for Low Voltage AC Power Circuits
  • IEEE C62.62-2010 – IEEE Standard Test Specifications for Surge-Protective Devices (SPDs) for Use on the Load Side of the Service Equipment in Low Voltage (1000 V and less) AC Power Circuits
  • IEEE/IEC 60255-118-1-2018 – IEEE/IEC International Standard – Measuring relays and protection equipment – Part 118-1: Synchrophasor for power systems – Measurements
  • IEEE C37.13.1a-2010 – IEEE Standard for Definite-Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear Amendment 1: Revise Short-Circuit Rating and Test Requirement
  • IEEE C37.13a-2012 – IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures Amendment 1: Increase of Voltages to 1000 V AC and Below
  • IEEE C37.98-1987 – IEEE Standard Seismic Testing of Relays
  • IEEE/IEC 62843-2013 – Standard for N times 64 kilobit per second optical fiber interfaces between teleprotection and multiplexer equipment
  • IEEE 48-2020 – IEEE Standard for Test Procedures and Requirements for Alternating-Current Cable Terminations Used on Shielded Cables Having Laminated Insulation Rated 2.5 kV through 765 kV or Extruded Insulation Rated 2.5 kV through 500 kV
  • N42.42-2006 – American National Standard Data Format Standard for Radiation Detectors Used for Homeland Security
  • IEEE 1601-2010 – IEEE Trial-Use Standard for Optical AC Current and Voltage Sensing Systems
  • IEEE 1685-2009 – IEEE Standard for IP-XACT, Standard Structure for Packaging, Integrating, and Reusing IP within Tool Flows
  • IEEE 1858-2016/Cor 1-2017 – IEEE Approved Standard for Camera Phone Image Quality (CPIQ) – Corrigendum 1
  • IEEE 1876-2019 – IEEE Standard for Networked Smart Learning Objects for Online Laboratories
  • IEEE 382-1980 – IEEE Standard for Qualification of Safety Related Valve Actuators
  • IEEE 463-1974 – IEEE Trial Use Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones
  • IEEE 649-1991 – IEEE Standard for Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations
  • IEEE 820-1984 – IEEE Standard Telephone Loop Performance Characteristics
  • IEEE 828-2005 – IEEE Standard for Software Configuration Management Plans
  • IEEE C37.09-1999 – IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
  • IEEE C37.112-2018 – IEEE Standard for Inverse-Time Characteristics Equations for Overcurrent Relays
  • IEEE C37.112-2018 – IEEE Standard for Inverse-Time Characteristics Equations for Overcurrent Relays
  • IEEE C37.14-2002 – IEEE Standard for Low-Voltage DC Power Circuit Breakers Used in Enclosures
  • IEEE C37.21-2005 – IEEE Standard for Control Switchboards
  • IEEE C37.30.5-2018 – IEEE Standard for Definitions for AC High-Voltage Air Switches Rated Above 1000 V
  • IEEE C37.34e-1979 – IEEE Standard Test Code for High-Voltage Air Switches (Supplement: Switching-Impulse Testing of Extra-High voltage Switches)
  • IEEE C37.82-1987 – IEEE Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations
  • IEEE C37.90.3-2001 – IEEE Standard Electrostatic Discharge Tests for Protective Relays
  • IEEE C57.12.20-2005 – Standard for Overhead Type Distribution Transformers, 500 kVA and Smaller: High Voltage, 34500 Volts and Below; Low Voltage, 7970/13800Y Volts and Below
  • IEEE C57.12.20-2017 – IEEE Standard for Overhead-Type Distribution Transformers 500 kVA and Smaller; High Voltage, 34 500 V and Below; Low Voltage, 7970/13 800Y V and Below
  • IEEE C57.12.23-2018 – IEEE Standard for Submersible Single-Phase Transformers:250 kVA and Smaller; High Voltage 34 500 GrdY/19 920 V and Below; Low Voltage 600 V and Below
  • IEEE C57.12.40-2006 – IEEE Standard for Requirements for Secondary Network Transformers, Subway and Vault Types (Liquid-Immersed)
  • IEEE C57.12.40-2011 – IEEE Standard for Network, Three-Phase Transformers, 2500 kVA and Smaller; High Voltage, 34 500 GrdY/19 920 and Below; Low Voltage, 600 V and Below; Subway and Vault Types (Liquid Immersed)

Disclaimer : jika ada perbedaan antara daftar nama di artikel ini dengan artikel asli dari ieee.org, maka pembaca harus mengikuti artikel asli dari ieee.org tersebut.

Demikian artikel dari standarku.com mengenai Daftar Standar IEEE part 16 Power and Energy sub part 1.

Mohon saran dari pembaca untuk kelengkapan isi artikel ini, silahkan saran tersebut dapat disampaikan melalui kolom komentar.

Baca artikel lain :

Sumber referensi :

Related Posts:

  • ISO IEC 15940 Software Engineering Environment Services ISO IEC 15940 adalah Standar Internasional mengenai systems and software engineering, khususnya tentang Software Engineering Environment Services. Standar versi terbaru yang masih berlaku adalah terbitan tahun 2013 dengan judul berikut…
  • Daftar Standar IEEE Nuclear Power Daftar Standar IEEE Nuclear Power adalah kumpulan sebagian judul standar IEEE yang diterbitkan oleh organisasi IEEE SA (Standards Association). Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi IEEE, yang…
  • IEEE Standards Association IEEE SA (Standards Association) adalah organisasi pembangun konsensus terkemuka yang memelihara, mengembangkan, dan memajukan teknologi global, melalui IEEE Merupakan organisasi profesi yang terdiri dari para ahli bidang teknik yang mempromosikan…
  • ISO IEC IEEE 15939 software engineering measurement ISO IEC IEEE 15939 adalah Standar Internasional mengenai Measurement process (Proses pengukuran) pada Systems and software engineering (Rekayasa sistem dan perangkat lunak). Standar versi terbaru yang masih berlaku adalah terbitan…
  • Portal Standar ANSI IBR Portal ANSI IBR adalah situs yang dibuat ANSI untuk menyediakan standar-standar gratis dari organisasi pengembangan standar untuk dibaca secara online. Sekilas Mengenai ANSI IBR ANSI IBR merupakan akronim dari :…
  • Mengenal standar ANSI ANSI (American National Standards Institute) adalah organisasi nirlaba swasta yang mengawasi pengembangan standar yang disetujui secara sukarela untuk produk, layanan, proses, sistem, dan personel di Amerika Serikat. Tujuan Standar ANSI…
  • Daftar Standar IEEE part 17-18 Daftar Standar IEEE part 17-18 adalah kumpulan judul standar IEEE dengan lingkup : Power Electronics, Smart Grid. Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi IEEE, yang penamaan nya…
  • Standar ISO 90003 Software engineering Pengertian Standar ISO 90003 ISO 90003 adalah standar internasional mengenai panduan suatu organisasi untuk menerapkan ISO 9001 pada rekayasa perangkat lunak (software) di komputer. Rekayasa tersebut meliputi kegiatan : penerimaan,…
  • Daftar Standar IEEE part 19-20 Daftar Standar IEEE part 19-20 adalah kumpulan judul standar IEEE dengan lingkup : Software and Systems Engineering, Transportation. Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi IEEE, yang penamaan…
  • ISO IEC IEEE 15026-4 Klausa 3 ISO IEC IEEE 15026-4 Klausa 3 adalah Standar Internasional mengenai systems and software engineering atau sistem dan rekayasa perangkat lunak, khususnya tentang systems and software assurance part 4: Assurance in…
  • Daftar Standar IEEE Power and Energy 6 Daftar Standar IEEE Power and Energy 6 adalah kumpulan judul standar IEEE dengan lingkup : Power and Energy sub part 6. Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi…
  • Daftar Standar IEEE part 7-11 Daftar Standar IEEE part 7-11 adalah kumpulan judul standar IEEE dengan lingkup : Consumer Electronics, Electromagnetic Compatibility, Green and Clean Technology, Healthcare IT, Industry Applications. Standar IEEE merupakan suatu standar…
  • Daftar Standar IEEE Power and Energy 7 Daftar Standar IEEE Power and Energy 7 adalah kumpulan judul standar IEEE dengan lingkup : Power and Energy sub part 7. Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi…
  • AIEE, Organisasi Electrical Engineers Amerika American Institute of Electrical Engineers (AIEE) adalah organisasi insinyur listrik yang berbasis di Amerika Serikat dari tahun 1884 hingga 1962, sekarang menjadi IEEE. Pada 1 Januari 1963, organisasi ini  bergabung…
  • Daftar Standar IEEE Computer Technology Daftar Standar IEEE Computer Technology adalah kumpulan sebagian judul standar IEEE yang diterbitkan oleh organisasi IEEE SA (Standards Association). Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi IEEE, yang…

Leave a Comment