Daftar Standar ISO 700-999 adalah kumpulan judul dari Standar nomor ISO 700 hingga ISO 999 yang diterbitkan oleh badan ISO Internasional.
Mengenai Standar ISO
ISO (International Organization for Standardization) adalah suatu organisasi atau lembaga nirlaba internasional, yang bertujuan untuk membuat dan memperkenalkan standar dan standardisasi internasional untuk berbagai tujuan.
ISO telah mengembangkan lebih dari 23,755 Standar Internasional dan semuanya tercantum di dalam katalog Standar ISO.
Isi dari standar ISO ini dilindungi oleh hak cipta dan sebagian besar harus melakukan proses pembelian untuk dapat mengakses keseluruhan isinya.
Namun ada sekitar 300 standar yang diproduksi oleh ISO dan IEC Joint Technical Committee (JTC1) telah dinyatakan bersifat bebas dan tersedia untuk umum.
Lebih jelas mengenai Standar ISO dan Badan ISO dapat dibaca pada artikel lain dari standarku.com berikut :
Standar Kerjasama
Didalam daftar standar ISO juga terdapat standar lain hasil kerjasama badan standardisasi lain dengan standar ISO seperti :
- IEC (International Electrotechnical Commission)
- IWA (International Workshop Agreement)
IEC adalah organisasi standardisasi internasional yang menyusun dan menerbitkan standar-standar internasional untuk seluruh bidang elektrik, elektronik dan teknologi yang terkait atau bidang teknologi elektro (electrotechnology).
Lebih jelas mengenai IEC dapat dibaca pada artikel lain dari standarku.com berikut :
IWA adalah dokumen ISO yang dihasilkan bukan melalui proses komite teknis ISO secara penuh, namun melalui workshop meeting.
Pelaku pasar dan pemangku kepentingan lainnya dapat berpartisipasi langsung dalam mengembangkan IWA dan tidak harus melalui delegasi nasional.
Ini adalah cara cepat untuk mendapatkan dokumen ISO yang diakui, prosesnya tidak boleh memakan waktu total lebih dari 12 bulan.
Prosesnya dirancang agar fleksibel dan sebagian besar diputuskan oleh organisasi yang mengajukan.
Daftar Standar ISO 500-699
Keseluruhan Daftar Standar ISO adalah dari ISO 1 hingga ISO 99999, namun terlalu panjang untuk ditampilkan semua pada halaman ini.
Untuk itu kami telah membaginya menjadi beberapa postingan, yang dimulai pada postingan sebelumnya berikut :
- Daftar Standar ISO (ISO 1-99)
- Daftar Standar ISO 100-199
- Daftar Standar ISO 200-499
- Daftar Standar ISO 500-699
Selanjutnya pada postingan kali ini akan menampilkan Standar ISO seri ISO 700 hingga ISO 999.
Daftar Standar ISO 700 – ISO 749
ISO 701:1998 International gear notation — Symbols for geometrical data
ISO 702 Machine tools — Connecting dimensions of spindle noses and work holding chucks
ISO 702-1:2009 Part 1: Conical connection
ISO 702-2:2007 Part 2: Camlock type
ISO 702-3:2007 Part 3: Bayonet type
ISO 702-4:2004 Part 4: Cylindrical connection
ISO 703:2017 Conveyor belts — Transverse flexibility (troughability) — Test method
ISO 704:2009 Terminology work — Principles and methods
ISO 705:2015 Rubber latex — Determination of density between 5 degrees C and 40 degrees C
ISO 706:2004 Rubber latex — Determination of coagulum content (sieve residue)
ISO 707:2008 Milk and milk products — Guidance on sampling
ISO 709:2001 Essential oils — Determination of ester value
ISO 710 Graphical symbols for use on detailed maps, plans and geological cross-sections
ISO 710-1:1974 Part 1: General rules of representation
ISO 710-2:1974 Part 2: Representation of sedimentary rocks
ISO 710-3:1974 Part 3: Representation of magmatic rocks
ISO 710-4:1982 Part 4: Representation of metamorphic rocks
ISO 710-5:1989 Part 5: Representation of minerals
ISO 710-6:1984 Part 6: Representation of contact rocks and rocks which have undergone metasomatic, pneumatolytic or hydrothermal transformation or transformation by weathering
ISO 710-7:1984 Part 7: Tectonic symbols
ISO 712:2009 Cereals and cereal products — Determination of moisture content — Reference method
ISO 714:1975 Zinc — Determination of iron content — Photometric method
ISO 717 Acoustics — Rating of sound insulation in buildings and of building elements
ISO 717-1:2020 Part 1: Airborne sound insulation
ISO 717-2:2020 Part 2: Impact sound insulation
ISO 718:1990 Laboratory glassware — Thermal shock and thermal shock endurance — Test methods
ISO 719:2020 Glass — Hydrolytic resistance of glass grains at 98 °C — Method of test and classification
ISO 720:2020 Glass — Hydrolytic resistance of glass grains at 121 °C — Method of test and classification
ISO 721:1991 Rock drilling equipment — Integral stems
ISO 722:1991 Rock drilling equipment — Hollow drill steels in bar form, hexagonal and round
ISO 723:1991 Rock drilling equipment — Forged collared shanks and corresponding chuck bushings for hollow hexagonal drill steels
ISO 724:1993 ISO general-purpose metric screw threads — Basic dimensions
ISO 725:2009 ISO inch screw threads — Basic dimensions
ISO 727 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure
ISO 727-1:2002 Part 1: Metric series
ISO 727-2:2005 Part 2: Inch-based series
ISO 728:1995 Coke (nominal top size greater than 20 mm) — Size analysis by sieving
ISO 729:1988 Oilseeds — Determination of acidity of oils
ISO 730:2009 Agricultural wheeled tractors — Rear-mounted three-point linkage — Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4
ISO 732:2000 Photography — 120-size and 220-size films — Dimensions
ISO 734:2015 Oilseed meals — Determination of oil content — Extraction method with hexane (or light petroleum)
ISO 735:1977 Oilseed residues — Determination of ash insoluble in hydrochloric acid
ISO 737:1975 Coniferous sawn timber — Sizes — Methods of measurement
ISO 738:2015 Coniferous sawn timber — Sizes — Permissible deviations and shrinkage
ISO 739:1976 Sodium carbonate for industrial use — Preparation and storage of test samples
ISO 740:1976 Sodium carbonate for industrial use — Determination of total soluble alkalinity — Titrimetric method
ISO 746:1976 Sodium carbonate for industrial use — Determination of matter insoluble in water at 50 degrees C
ISO 748:2007 Hydrometry — Measurement of liquid flow in open channels using current-meters or floats
ISO 749:1977 Oilseed residues — Determination of total ash
Daftar Standar ISO 750 – ISO 799
ISO 750:1998 Fruit and vegetable products — Determination of titratable acidity
ISO 751:1998 Fruit and vegetable products — Determination of water-insoluble solids
ISO 752:2004 Zinc ingots
ISO 756 Propan-2-ol for industrial use — Methods of test
ISO 756-1:1981 Part 1: General
ISO 758:1976 Liquid chemical products for industrial use — Determination of density at 20 degrees C
ISO 759:1981 Volatile organic liquids for industrial use — Determination of dry residue after evaporation on water bath — General method
ISO 760:1978 Determination of water — Karl Fischer method (General method)
ISO 762:2003 Fruit and vegetable products — Determination of mineral impurities content
ISO 763:2003 Fruit and vegetable products — Determination of ash insoluble in hydrochloric acid
ISO 764:2020 Horology — Magnetic resistant watches
ISO 765:2016 Pesticides considered not to require common names
ISO 770:2002 Crude or rectified oils of Eucalyptus globulus (Eucalyptus globulus Labill.)
ISO 771:1977 Oilseed residues — Determination of moisture and volatile matter content
ISO 772:2011 Hydrometry — Vocabulary and symbols
ISO 776:2011 Pulps — Determination of acid-insoluble ash
ISO 780:2015 Packaging – Distribution packaging — Graphical symbols for handling and storage of packages
ISO 787 General methods of test for pigments and extenders
ISO 787-1:1982 Part 1: Comparison of colour of pigments
ISO 787-2:1981 Part 2: Determination of matter volatile at 105 degrees C
ISO 787-3:2000 Part 3: Determination of matter soluble in water — Hot extraction method
ISO 787-4:1981 Part 4: Determination of acidity or alkalinity of the aqueous extract
ISO 787-5:1980 Part 5: Determination of oil absorption value
ISO 787-7:2009 Part 7: Determination of residue on sieve — Water method — Manual procedure
ISO 787-8:2000 Part 8: Determination of matter soluble in water — Cold extraction method
ISO 787-9:2019 Part 9: Determination of pH value of an aqueous suspension
ISO 787-10:1993 Part 10: Determination of density — Pyknometer method
ISO 787-11:1981 Part 11: Determination of tamped volume and apparent density after tamping
ISO 787-13:2019 Part 13: Determination of water-soluble sulphates, chlorides and nitrates
ISO 787-14:2019 Part 14: Determination of resistivity of aqueous extract
ISO 787-15:2019 Part 15: Comparison of resistance to light of coloured pigments of similar types
ISO 787-16:1986 Part 16: Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments — Visual comparison method
ISO 787-17:2019 Part 17: Comparison of lightening power of white pigments
ISO 787-18:1983 Part 18: Determination of residue on sieve — Mechanical flushing procedure
ISO 787-19:2020 Part 19: Determination of water-soluble nitrates (Salicylic acid method)
ISO 787-21:1979 Part 21: Comparison of heat stability of pigments using a stoving medium
ISO 787-22:1980 Part 22: Comparison of resistance to bleeding of pigments
ISO 787-23:1979 Part 23: Determination of density (using a centrifuge to remove entrained air)
ISO 787-24:1985 Part 24: Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments — Photometric methods
ISO 787-25:2019 Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments — Colorimetric method
ISO 787-28:2019 Part 28: Determination of total content of polychlorinated biphenyls (PCB) by dissolution, cleanup and GC-MS
ISO 788:1974 Ultramarine pigments for paints
ISO 789 Agricultural tractors — Test procedures
ISO 789-1:2018 Part 1: Power tests for power take-off
ISO 789-2:2018 Part 2: Rear three-point linkage lifting capacity
ISO 789-3:2015 Part 3: Turning and clearance diameters
ISO 789-4:1986 Part 4: Measurement of exhaust smoke
ISO 789-5:1983 Part 5: Partial power PTO — Non-mechanically transmitted power
ISO 789-6:2019 Part 6: Centre of gravity
ISO 789-7:1991 Part 7: Axle power determination
ISO 789-8:1991 Part 8: Engine air cleaner
ISO 789-9:2018 Part 9: Power tests for drawbar
ISO/OECD 789-10:2006 Part 10: Hydraulic power at tractor/implement interface
ISO 789-11:1996 Part 11: Steering capability of wheeled tractors
ISO 789-12:2000 Part 12: Low temperature starting
ISO 789-13:2018 Part 13: Vocabulary and specimen test report
ISO 791:1973 Magnesium alloys — Determination of aluminium — 8-hydroxyquinoline gravimetric method
ISO 792:1973 Magnesium and magnesium alloys — Determination of iron — Orthophenanthroline photometric method
ISO 793:1973 Aluminium and aluminium alloys — Determination of iron — Orthophenanthroline photometric method
ISO 794:1976 Magnesium and magnesium alloys — Determination of copper content — Oxalyldihydrazide photometric method
ISO 795:1976 Aluminium and aluminium alloys — Determination of copper content — Oxalyldihydrazide photometric method
ISO 796:1973 Aluminium alloys — Determination of copper — Electrolytic method
ISO 797:1973 Aluminium and aluminium alloys — Determination of silicon — Gravimetric method
ISO 799 Ships and marine technology — Pilot ladders
ISO 799-1:2019 Part 1: Design and specification
Daftar Standar ISO 800 – ISO 849
ISO 801 Pulps — Determination of saleable mass in lots
ISO 801-1:1994 Part 1: Pulp baled in sheet form
ISO 801-2:1994 Part 2: Pulps (such as flash-dried pulps) baled in slabs
ISO 801-3:1994 Part 3: Unitized bales
ISO 806:2004 Aluminium oxide primarily used for the production of aluminium — Determination of loss of mass at 300 degrees C and 1 000 degrees C
ISO 808:1973 Aluminium and aluminium alloys — Determination of silicon — Spectrophotometric method with the reduced silicomolybdic complex
ISO 809:1973 Magnesium and magnesium alloys — Determination of manganese — Periodate photometric method (Manganese content between 0,01 and 0,8 %)
ISO 810:1973 Magnesium and magnesium alloys — Determination of manganese — Periodate photometric method (Manganese content less than 0,01 %)
ISO 811:2018 Textiles — Determination of resistance to water penetration — Hydrostatic pressure test
ISO 812:2017 Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness
ISO 813:2019 Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method
ISO 814:2017 Rubber, vulcanized or thermoplastic — Determination of adhesion to metal — Two-plate method
ISO 815 Rubber, vulcanized or thermoplastic — Determination of compression set
ISO 815-1:2019 Part 1: At ambient or elevated temperatures
ISO 815-2:2019 Part 2: At low temperatures
ISO 817:2014 Refrigerants — Designation and safety classification
ISO 830:1999 Freight containers — Vocabulary
ISO 832:1994 Information and documentation — Bibliographic description and references — Rules for the abbreviation of bibliographic terms
ISO 834 Fire-resistance tests — Elements of building construction
ISO 834-1:1999 Part 1: General requirements
ISO 834-2:2019 Part 2: Requirements and recommendations for measuring furnace exposure on test samples
ISO/TR 834-3:2012 Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test
ISO 834-4:2000 Part 4: Specific requirements for loadbearing vertical separating elements
ISO 834-5:2000 Part 5: Specific requirements for loadbearing horizontal separating elements
ISO 834-6:2000 Part 6: Specific requirements for beams
ISO 834-7:2000 Part 7: Specific requirements for columns
ISO 834-8:2002 Part 8: Specific requirements for non-loadbearing vertical separating elements
ISO 834-9:2003 Part 9: Specific requirements for non-loadbearing ceiling elements
ISO 834-10:2014 Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural steel elements
ISO 834-11:2014 Part 11: Specific requirements for the assessment of fire protection to structural steel elements
ISO 834-12:2012 Part 12: Specific requirements for separating elements evaluated on less than full scale furnaces
ISO 834-13:2019 Part 13: Requirements for the testing and assessment of applied fire protection to steel beams with web openings
ISO 834-14:2019 Part 14: Requirements for the testing and assessment of applied fire protection to solid steel bar
ISO 835:2007 Laboratory glassware — Graduated pipettes
ISO 836:2001 Terminology for refractories
ISO 838:1974 Paper — Holes for general filing purposes — Specifications
ISO 839 Milling machine arbors with 7/24 tapers
ISO 839-1:2006 Part 1: Dimensions and designation
ISO 839-2:1977 Part 2: Accessories
ISO 841:2001 Industrial automation systems and integration — Numerical control of machines — Coordinate system and motion nomenclature
ISO 843:1997 Information and documentation — Conversion of Greek characters into Latin characters
ISO 844:2014 Rigid cellular plastics — Determination of compression properties
ISO 845:2006 Cellular plastics and rubbers — Determination of apparent density
ISO 846:2019 Plastics — Evaluation of the action of microorganisms
Daftar Standar ISO 850 – ISO 899
ISO 855:2003 Oil of lemon [Citrus limon (L.) Burm. f.], obtained by expression
ISO 856:2006 Oil of peppermint (Mentha x piperita L.)
ISO 857 Welding and allied processes — Vocabulary
ISO 857-2:2005 Part 2: Soldering and brazing processes and related terms
ISO 858:1973 Fishing nets — Designation of netting yarns in the Tex System
ISO 860:2007 Terminology work — Harmonization of concepts and terms
ISO 862:1984 Surface active agents — Vocabulary
ISO 863:2008 Cement — Test methods — Pozzolanicity test for pozzolanic cements
ISO 865:1981 Slots in platens for projection welding machines
ISO 866:2016 Centre drills for centre holes without protecting chamfers — Type A
ISO 868:2003 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 871:2006 Plastics — Determination of ignition temperature using a hot-air furnace
ISO 873:1980 Peaches — Guide to cold storage
ISO 874:1980 Fresh fruits and vegetables — Sampling
ISO 875:1999 Essential oils — Evaluation of miscibility in ethanol
ISO 877 Plastics — Methods of exposure to solar radiation
ISO 877-1:2009 Part 1: General guidance
ISO 877-2:2009 Part 2: Direct weathering and exposure behind window glass
ISO 877-3:2018 Part 3: Intensified weathering using concentrated solar radiation
ISO 882 Cardamom (Elettaria cardamomum (Linnaeus) Maton var. minuscula Burkill) — Specification
ISO 882-1:1993 Part 1: Whole capsules
ISO 882-2:1993 Part 2: Seeds
ISO 883:2013 Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions
ISO 885:2000 General purpose bolts and screws — Metric series — Radii under the head
ISO 886:1973 Aluminium and aluminium alloys — Determination of manganese — Photometric method (Manganese content between 0,005 and 1,5 %)
ISO 887:2000 Plain washers for metric bolts, screws and nuts for general purposes — General plan
ISO 888:2012 Fasteners — Bolts, screws and studs — Nominal lengths and thread lengths
ISO 893:1989 Surface active agents — Technical alkane sulfonates — Methods of analysis
ISO 894:1977 Surface active agents — Technical sodium primary alkylsulphates — Methods of analysis
ISO 895:1977 Surface active agents — Technical sodium secondary alkylsulphates — Methods of analysis
ISO 897:2000 Photography — Roll films, 126, 110 and 135-size films — Identification of the image-bearing side
ISO 898 Mechanical properties of fasteners made of carbon steel and alloy steel[Note 3]
ISO 899 Plastics — Determination of creep behaviour
ISO 899-1:2017 Part 1: Tensile creep
ISO 899-2:2003 Part 2: Flexural creep by three-point loading
Daftar Standar ISO 900 – ISO 949
ISO 902:1976 Aluminium oxide primarily used for the production of aluminium — Measurement of the angle of repose
ISO 904:1976 Hydrochloric acid for industrial use — Determination of total acidity — Titrimetric method
ISO 910:1977 Sulphuric acid and oleum for industrial use — Determination of total acidity, and calculation of free sulphur trioxide content of oleum — Titrimetric method
ISO 916:2020 Testing of refrigerating systems
ISO 918:1983 Volatile organic liquids for industrial use — Determination of distillation characteristics
ISO 920:1976 Wool — Determination of fibre length (barbe and hauteur) using a comb sorter
ISO 923:2000 Coal cleaning equipment — Performance evaluation
ISO 924:1989 Coal preparation plant — Principles and conventions for flowsheets
ISO 925:2019 Solid mineral fuels — Determination of carbonate carbon content — Gravimetric method
ISO 927:2009 Spices and condiments — Determination of extraneous matter and foreign matter content
ISO 928:1997 Spices and condiments — Determination of total ash
ISO 930:1997 Spices and condiments — Determination of acid-insoluble ash
ISO 931:1980 Green bananas — Guide to storage and transport
ISO 934:1980 Animal and vegetable fats and oils — Determination of water content — Entrainment method
ISO 935:1988 Animal and vegetable fats and oils — Determination of titre
ISO 936:1998 Meat and meat products — Determination of total ash
ISO 937:1978 Meat and meat products — Determination of nitrogen content (Reference method)
ISO 938:1975 Hand-operated stillage trucks — Principal dimensions
ISO 939:1980 Spices and condiments — Determination of moisture content — Entrainment method
ISO 941:1980 Spices and condiments — Determination of cold water-soluble extract
ISO 945 Microstructure of cast irons
ISO 945-1:2019 Part 1: Graphite classification by visual analysis
ISO/TR 945-2:2011 Part 2: Graphite classification by image analysis
ISO/TR 945-3:2016 Part 3: Matrix structures
ISO 945-4:2019 Part 4: Test method for evaluating nodularity in spheroidal graphite cast irons
ISO 948:1980 Spices and condiments — Sampling
ISO 949:1987 Cauliflowers — Guide to cold storage and refrigerated transport
Daftar Standar ISO 950 – ISO 999
ISO 959 Pepper (Piper nigrum L.), whole or ground — Specification
ISO 959-1:1998 Part 1: Black pepper
ISO 959-2:1998 Part 2: White pepper
ISO 962:1974 Information processing — Implementation of the 7- bit coded character set and its 7- bit and 8-bit extensions on 9- track 12,7 mm (0.5 in) magnetic tape
ISO 965 ISO general purpose metric screw threads — Tolerances
ISO 972:1997 Chillies and capsicums, whole or ground (powdered) — Specification
ISO 973:1999 Pimento (allspice) [Pimenta dioica (L.) Merr.], whole or ground — Specification
ISO 974:2000 Plastics — Determination of the brittleness temperature by impact
ISO 975:2013 Brown coals and lignites — Determination of yield of benzene-soluble extract — Semi-automatic method
ISO 976:2013 Rubber and plastics — Polymer dispersions and rubber latices — Determination of pH
ISO 979:1974 Sodium hydroxide for industrial use — Method of assay
ISO 981:1973 Sodium hydroxide for industrial use — Determination of chloride content — Mercurimetric method
ISO 999:1996 Information and documentation — Guidelines for the content, organization, and presentation of indexes
Update Daftar
Untuk daftar lengkap dan terbaru dari semua standar ISO setiap saat, bisa dilihat pada katalog ISO di web resmi ISO international berikut :
https://www.iso.org/standards-catalogue/browse-by-ics.html
Demikian artikel dari standarku.com mengenai Daftar Standar ISO 700-999.
Mohon saran dari pembaca untuk kelengkapan isi artikel ini, silahkan saran tersebut dapat disampaikan melalui kolom komentar.
Baca artikel lain :
- Daftar Standar ISO (ISO 1-99)
- Daftar Standar ISO 100-199
- Daftar Standar ISO 200-499
- Daftar Standar ISO 500-699
- Daftar Standar ANSI IBR
- Daftar Standar IEC
Sumber referensi :