Daftar Standar IEEE Power and Energy 5

Daftar Standar IEEE Power and Energy 5 adalah kumpulan judul standar IEEE dengan lingkup : Power and Energy sub part 5.

Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi IEEE, yang penamaan nya diawali dengan kode “IEEE”.

IEEE SA (Standards Association) adalah organisasi pembangun konsensus terkemuka yang memelihara, mengembangkan, dan memajukan teknologi global, melalui IEEE.

Artikel ini adalah lanjutan dari artikel sebelumnya dari standarku.com mengenai organisasi IEEE SA berikut :

Jadi artikel ini ditujukan untuk membantu pembaca dalam mencari apa saja judul standar IEEE yang dibutuhkan.

Untuk mempermudah pencarian judul standar, disini kami cantumkan pembagian berdasarkan klasifikasi berikut.

Klasifikasi Standar IEEE

Standar IEEE dibagi menjadi 21 klasifikasi sebagaimana berikut :

  1. Aerospace Electronics
  2. Antennas and Propagation
  3. Batteries
  4. Blockchain
  5. Communications
  6. Computer Technology
  7. Consumer Electronics
  8. Electromagnetic Compatibility
  9. Green and Clean Technology
  10. Healthcare IT
  11. Industry Applications
  12. Instrumentation and Measurement
  13. Nanotechnology
  14. National Electrical Safety Code (NESC)
  15. Nuclear Power
  16. Power and Energy
  17. Power Electronics
  18. Smart Grid
  19. Software and Systems Engineering
  20. Transportation
  21. Wired and Wireless Communications

Dikarenakan standar IEEE sangat banyak jumlahnya, maka akan dibagi menjadi beberapa artikel seri Daftar Standar IEEE.

Pada artikel sebelumnya mencakup kategori yang pertama hingga ke 15 sebagaimana berikut :

Pada artikel kali ini mencakup kategori yang ke 16 (part 16) yakni : Power and Energy.

Kategori Power and Energy memiliki jumlah standar yang sangat banyak, oleh karena itu kami bagi lagi menjadi beberapa sub part artikel.

Artikel ini merupakan sebagian daftar judul dari kategori Power and Energy untuk sub part 5.

Kategori lain akan dilanjutkan pada artikel dari standarku.com berikutnya.

Kolaborasi Organisasi Pengembang Standar

Pada beberapa judul artikel di kategori ini ada yang merupakan hasil kolaborasi antara IEEE dengan organisasi pengembang standar lain seperti :

  • ISO (International Organization for Standardization), adalah suatu organisasi atau lembaga nirlaba internasional, yang bertujuan untuk membuat dan memperkenalkan standar dan standardisasi internasional untuk berbagai tujuan.
  • IEC, adalah organisasi standardisasi internasional yang menyusun dan menerbitkan standar-standar internasional untuk seluruh bidang elektrik, elektronik dan teknologi yang terkait atau bidang teknologi elektro (electrotechnology).
  • ANSI (American National Standards Institute), adalah organisasi nirlaba swasta yang mengawasi pengembangan standar yang disetujui secara sukarela untuk produk, layanan, proses, sistem, dan personel di Amerika Serikat.

Seperti yang ditunjukkan pada judul dengan kode awalan nama gabungan sebagaimana berikut :

  • IEEE/IEC
  • IEEE/ISO/IEC
  • IEEE/ISO
  • IEEE/ANSI
  • ANSI/AAMI
  • IEEE/AIEE

Lebih jelas mengenai organisasi pengembang standar lain diatas dapat dibaca pada artikel lain dari standarku.com berikut :

Daftar Standar IEEE

Berikut adalah judul standar-standar IEEE part 16 yang dikutip dari ieee.org per 25 Agustus 2021 :

Daftar Standar IEEE Power and Energy 5

  • IEEE 1125-1993 – IEEE Guide for Moisture Measurement and Control in SF6 Gas-Insulated Equipment
  • IEEE 1349-2011 – IEEE Guide for Application of Electric Motors in Class I, Division 2 and Class I, Zone 2 Hazardous (Classified) Locations
  • IEEE 1416-1998 – IEEE Recommended Practice for the Interface of New Gas-Insulated Equipment in Existing Gas-Insulated Substations
  • IEEE 1434-2000 – IEEE Guide to the Measurement of Partial Discharges in Rotating Machinery
  • IEEE 1534-2002 – IEEE Recommended Practice for Specifying Thyristor-Controlled Series Capacitors
  • IEEE 1726-2013 – IEEE Guide for the Functional Specification of Fixed-Series Capacitor Banks for Transmission System Applications
  • IEEE 693-1997 – IEEE Recommended Practices for Seismic Design of Substations
  • IEEE 99-2007 – IEEE Recommended Practice for the Preparation of Test Procedures for the Thermal Evaluation of Insulation Systems for Electrical Equipment
  • IEEE C37.122.1-1993 – IEEE Guide for Gas-Insulated Substations
  • IEEE C37.123-1996 – IEEE Guide to Specifications for Gas-Insulated, Electric Power Substation Equipment
  • IEEE C37.27-2008 – IEEE Application Guide for Low-Voltage AC Power Circuit Breakers Applied with Separately-Mounted Current-Limiting Fuses
  • IEEE C37.27-2015 – IEEE Guide for Low-Voltage AC (635 V and below) Power Circuit Breakers Applied with Separately-Mounted Current-Limiting Fuses
  • IEEE C37.48-2020 – IEEE Guide and Tutorial for the Application of High-Voltage (> 1000 V) Fuses and Accessories
  • IEEE C57.140-2006 – IEEE Guide for Evaluation and reconditioning of Liquid Immersed Power Transformers
  • IEEE C57.96-1999 – IEEE Guide for Loading Dry-Type Distribution and Power Transformers
  • IEEE C62.2-1987 – IEEE Guide for the Application of Gapped Silicon-Carbide Surge Arresters for Alternating Current Systems
  • IEEE C62.22-1991 – IEEE Guide for the Application of Metal Oxide Surge Arresters for AC Systems
  • IEEE C62.22-1997 – IEEE Guide for Application of Metal-Oxide Surge Arresters for Alternating-Current Systems
  • IEEE C62.42-1987 – IEEE Guide for the Application of Gas Tube Arrester Low-Voltage Surge-Protective Devices
  • IEEE C62.42-1992 – IEEE Guide for the Application of Gas Tube and Air Gap Arrester Low-Voltage (Equal to or Less than 1000 V rms or 1200 V dc) Surge Protective Devices
  • IEEE C62.42-2005 – IEEE Guide for the Application of Component Surge-Protective Devices for Use in Low-Voltage [Equal to or Less than 1000 V (ac) Or 1200 V (dc)] Circuits
  • IEEE C62.42.0-2016 – IEEE Guide for the Application of Surge-Protective Components in Surge-Protective Devices and Equipment Ports–Overview
  • IEEE C62.42.3-2017 – IEEE Guide for the Application of Surge Protective Components in Surge Protective Devices and Equipment Ports — Part 3: Silicon PN-Junction
  • IEEE C62.42.4-2020 – IEEE Guide for the Application of Surge-Protective Components in Surge Protective Devices and Equipment Ports–Part 4: Thermally Activated Current Limiters
  • IEEE C62.42.6-2018 – IEEE Guide for the Application of Surge-Protective Components in Surge Protective Devices and EquipmentPorts–Part 6 High Frequency Signal Isolation Transformers
  • IEEE C62.42.6-2018 – IEEE Guide for the Application of Surge-Protective Components in Surge Protective Devices and EquipmentPorts–Part 6 High Frequency Signal Isolation Transformers
  • IEEE C62.44-2016 – IEEE Guide for the Application of Low-Voltage (1000 V rms or Less) Surge Protective Devices Used on Secondary Distribution Systems (Between the Transformer Low-Voltage Terminals and the Line Side of the Service Equipment)
  • IEEE 979-1984 – IEEE Guide for Substation Fire Protection
  • AIEE 14-1925 – AIEE Instrument Transformers
  • AIEE 19-1938 – AIEE Oil Circuit Breakers
  • IEEE 1-2000 – IEEE Recommended Practice – General Principles for Temperature Limits in the Rating of Electrical Equipment and for the Evaluation of Electrical Insulation
  • IEEE 1221-1993 – IEEE Guide for Fire Hazard Assessment of Electrical Insulating Materials in Electrical Power Systems
  • IEEE 126-1959 – IEEE Recommended Specification for Speed Governing of Internal Combustion Engine-Generator Units
  • IEEE 141-1993 – IEEE Recommended Practice for Electric Power Distribution for Industrial Plants
  • IEEE 1410-2004 – IEEE Guide for Improving the Lightning Performance of Electric Power Overhead Distribution Lines
  • IEEE 1531-2003 – IEEE Guide for Application and Specification of Harmonic Filters
  • IEEE 1531-2020 – IEEE Guide for the Application and Specification of Harmonic Filters
  • IEEE 1580-2010 – IEEE Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating Facilities
  • IEEE 1812-2014 – IEEE Trial-Use Guide for Testing Permanent Magnet Machines
  • IEEE 241-1990 – IEEE Recommended Practice for Electric Power Systems in Commercial Buildings
  • IEEE 242-1986 – IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems
  • IEEE 242-2001 – IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book)
  • IEEE 303-2004 – IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations
  • IEEE 393-1977 – IEEE Test Procedures for Magnetic Cores
  • IEEE 399-1997 – IEEE Recommended Practice for Industrial and Commercial Power Systems Analysis (Brown Book)
  • IEEE 421A-1978 – IEEE Guide for Identification, Testing, and Evaluation of the Dynamic Performance of Excitation Control Systems
  • IEEE 485-1997 – IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications
  • IEEE 82-1963 – IEEE Test Procedure for Impulse Voltage Tests on Insulated Conductors
  • IEEE 833-1988 – IEEE Recommended Practice for the Protection of Electric Equipment in Nuclear Power Generating Stations from Water Hazards
  • IEEE 902-1998 – IEEE Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems (Yellow Book)
  • IEEE C37.10.1-2000 – IEEE Guide for the Selection of Monitoring for Circuit Breakers
  • IEEE C37.23-1987 – IEEE Guide for Metal-Enclosed Bus and Calculating Losses in Isolated-Phase Bus
  • IEEE C37.241-2017 – IEEE Guide for Application of Optical Instrument Transformers for Protective Relaying
  • IEEE C57.106-1991 – IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment
  • IEEE C57.106-2002 – Guide for Acceptance and Maintenance of Insulating Oil in Equipment
  • IEEE C57.110-1998 – IEEE Recommended Practice for Establishing Transformer Capability When Supplying Nonsinusoidal Load Currents
  • IEEE C57.110-2008 – IEEE Recommended Practice for Establishing Liquid-Filled and Dry-Type Power and Distribution Transformer Capability When Supplying Nonsinusoidal Load Currents
  • IEEE C57.110-2018 – IEEE Recommended Practice for Establishing Liquid Immersed and Dry-Type Power and Distribution Transformer Capability when Supplying Nonsinusoidal Load Currents
  • IEEE C57.139-2010 – IEEE Guide for Dissolved Gas Analysis in Transformer Load Tap Changers
  • IEEE C57.139-2015 – IEEE Guide for Dissolved Gas Analysis in Transformer Load Tap Changers
  • IEEE C62.23-2017 – IEEE Application Guide for Surge Protection of Electric Generating Plants
  • IEEE C62.41.1-2002 – IEEE Guide on the Surge Environment in Low-Voltage (1000 V and less) AC Power Circuits
  • IEEE C62.41.2-2002 – IEEE Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and less) AC Power Circuits
  • IEEE C62.41.2-2002 – IEEE Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and less) AC Power Circuits
  • IEEE NESC HBK – 2017 NESC(R) Handbook, Eighth Edition
  • IEEE/AIEE 27-1930 – AIEE Switchboards and Switching Equipment for Power and Light
  • IEEE/AIEE 36-1928 – AIEE Storage Batteries (Revised)
  • IEEE/AIEE 41-1944 – AIEE Insulator Tests
  • IEEE/AIEE 606-1959 – AIEE Recommended Specification for Self Governing of Internal Combustion Engine-Generator Units
  • IEEE/AIEE 9-1927 – AIEE Induction Motors and Induction Machines in General
  • IEEE/AIEE 92-1962 – AIEE Recommended Practice for A-C System Voltage Nomenclature for Industrial and Commercial Power Systems
  • AIEE 1D-1957 – AIEE Guide For the Preparation of test Procedures for the Thermal Evaluation of Electrical Insulating Materials
  • ANSI/IEEE 367-1979 – IEEE Guide for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault
  • ANSI/IEEE 484-1975 – IEEE Recommended Practice for Installation Design and Installation of Large Lead Storage Batteries for Generating Stations and Substations
  • ANSI/IEEE 485-1978 – IEEE Recommended Practice for Sizing Large Lead Storage Batteries for Generating Stations and Substations
  • IEEE 1001-1988 – IEEE Guide for Interfacing Dispersed Storage and Generation Facilities with Electric Utility Systems
  • IEEE 1010-2006 – IEEE Guide for Control of Hydroelectric Power Plants
  • IEEE 1013-1990 – IEEE Recommended Practice for Sizing Lead-Acid Batteries for Photovoltaic (PV) Systems
  • IEEE 1013-2000 – IEEE Recommended Practice for Sizing Lead-Acid Batteries for Photovoltaic (PV) Systems
  • IEEE 1015-1997 – IEEE Recommended Practice for Applying Low-Voltage Circuit Breakers Used in Industrial and Commercial Power Systems
  • IEEE 1015-2006 – IEEE Recommended Practice for Applying Low-Voltage Circuit Breakers Used in Industrial and Commercial Power Systems [BLUE BOOK]
  • IEEE 1015-2006/Cor 1-2007 – IEEE Recommended Practice for Applying Low Voltage Circuit Breakers Used in Industrial and Commercial Power Systems – Corrigendum 1
  • IEEE 1017-2013 – IEEE Recommended Practice for Field Testing Electric Submersible Pump Cable
  • IEEE 1018-2013 – IEEE Recommended Practice for Specifying Electric Submersible Pump Cable—Ethylene-Propylene Rubber Insulation
  • IEEE 1019-2013 – IEEE Recommended Practice for Specifying Electric Submersible Pump Cable—Polypropylene Insulation
  • IEEE 1024-1988 – IEEE Recommended Practice for Specifying Distribution Composite Insulators (Suspension Type)
  • IEEE 1025-1993 – IEEE Guide to the Assembly and Erection of Concrete Pole Structures
  • IEEE 1030-1987 – IEEE Guide for Specification of High-Voltage Direct-Current Systems: Part 1 – Steady State Performance
  • IEEE 1031-1991 – IEEE Guide for a Detailed Functional Specification and Application of Static VAR Compensators
  • IEEE 1031-2000 – IEEE Guide for the Functional Specification of Transmission Static Var Compensators
  • IEEE 1035-1989 – IEEE Recommended Practice: Test Procedure for Utility-Interconnected Static Power Converters
  • IEEE 1036-1992 – IEEE Guide for Application of Shunt Power Capacitors
  • IEEE 1036-2010 – IEEE Guide for the Application of Shunt Power Capacitors
  • IEEE 1036-2020 – IEEE Guide for the Application of Shunt Power Capacitors
  • IEEE 1043-1989 – IEEE Recommended Practice for Voltage-Endurance Testing of Form-Wound Bars and Coils
  • IEEE 1043-1996 – IEEE Recommended Practice for Voltage-Endurance Testing of Form-Wound Bars and Coils
  • IEEE 1048-1990 – IEEE Guide for Protective Grounding of Power Lines
  • IEEE 1048-2003 – IEEE Guide for Protective Grounding of Power Lines
  • IEEE 1048-2016 – IEEE Guide for Protective Grounding of Power Lines
  • IEEE 1048a-2021 – IEEE Guide for Protective Grounding of Power Lines – Amendment 1
  • IEEE 1050-1989 – IEEE Guide for Instrumentation and Control Equipment Grounding in Generating Stations
  • IEEE 1050-1996 – IEEE Guide for Instrumentation and Control Equipment Grounding in Generating Stations
  • IEEE 1050-2004 – IEEE Guide for Instrumentation and Control Equipment Grounding in Generating Stations
  • IEEE 1052-2018 – IEEE Guide for Specification of Transmission Static Synchronous Compensator (STATCOM) Systems
  • IEEE 1067-1990 – IEEE Guide for In-Service Use, Care, Maintenance, and Testing of Conductive Clothing for Use on Voltages up to 765 kV AC
  • IEEE 1067-1996 – IEEE Guide for In-Service Use, Care, Maintenance, and Testing of Conductive Clothing for Use on Voltages up to 765 kV ac and ý 750 kV dc
  • IEEE 1067-2005 – IEEE Guide for In-Service Use, Care, Maintenance and Testing of Conductive Clothing for Use on Voltages up to 765 kV AC and 750 kV DC
  • IEEE 1067-2012 – IEEE Guide for In-Service Use, Care, Maintenance, and Testing of Conductive Clothing for Use on Voltages up to 765 kV AC and +/-750 kV DC
  • IEEE 1068-1996 – IEEE Recommended Practice for the Repair and Rewinding of Motors for the Petroleum and Chemical Industry
  • IEEE 1070-1988 – IEEE Guide for the Design and Testing of Transmission Modular Restoration Structure Components
  • IEEE 1070-1995 – IEEE Guide for the Design and Testing of Transmission Modular Restoration Structure Components
  • IEEE 1070-2006 – IEEE Guide for the Design and Testing of Transmission Modular Restoration Structure Components
  • IEEE 1071-2019 – IEEE Application Guide for an Engineered Restoration Program for Failed Transmission Structures
  • IEEE 1094-1991 – IEEE Recommended Practice for the Electrical Design and Operation of Windfarm Generating Stations
  • IEEE 1095-2012 – IEEE Guide for the Installation of Vertical Generators and Generator/Motors for Hydroelectric Applications
  • IEEE 1100-1992 – IEEE Recommended Practice for Powering and Grounding Sensitive Electronic Equipment
  • IEEE 1100-1999 – IEEE Recommended Practice for Powering and Grounding Electronic Equipment
  • IEEE 1100-2005 – IEEE Recommended Practice for Powering and Grounding Electronic Equipment
  • IEEE 1106-1987 – IEEE Recommended Practice for Maintenance, Testing, and Replacement of Nickel-Cadmium Storage Batteries for Generating Stations and Substations
  • IEEE 1106-2015 – IEEE Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vented Nickel-Cadmium Batteries for Stationary Applications
  • IEEE 1107-1996 – IEEE Recommended Practice for Thermal Evaluation of Sealed Insulation Systems for AC Electric Machinery Employing Random-Wound Stator Coils
  • IEEE 1109-1990 – IEEE Guide for the Interconnection of User-Owned Substations to Electric Utilities
  • IEEE 1110-1991 – IEEE Guide for Synchronous Generator Modeling Practices in Stability Analyses
  • IEEE 1110-2019 – IEEE Guide for Synchronous Generator Modeling Practices and Parameter Verification with Applications in Power System Stability Analyses
  • IEEE 1115-1992 – IEEE Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications
  • IEEE 1115-2000 – IEEE Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications
  • IEEE 1115-2014 – IEEE Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications
  • IEEE 1115a-2007 – IEEE Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications Amendment 1: Additional Discussion on Sizing Margins
  • IEEE 1120-1990 – IEEE Guide to the Factors to Be Considered in the Planning, Design, and Installation of Submarine Power and Communications Cables
  • IEEE 1120-2004 – IEEE Guide for the Planning, Design, Installation, and Repair of Submarine Power Cable Systems
  • IEEE 1124-2003 – IEEE Guide for Analysis and Definition of DC Side Harmonic Performance of HVDC Transmision Systems
  • IEEE 1127-1990 – IEEE Guide for the Design, Construction, and Operation of Safe and Reliable Substations for Environmental Acceptance
  • IEEE 113-1985 – IEEE Guide: Test Procedures for Direct-Current Machines
  • IEEE 1142-1995 – IEEE Guide for the Design, Testing, and Application of Moisture-Impervious, Solid Dielectric, 5-35 kV Power Cable Using Metal-Plastic Laminates
  • IEEE 1142-2009 – IEEE Guide for the Selection, Testing, Application, and Installation of Cables having Radial-Moisture Barriers and/or Longitudinal Water Blocking
  • IEEE 1143-1994 – IEEE Guide on Shielding Practice for Low Voltage Cables
  • IEEE 1143-2012 – IEEE Guide on Shielding Practice for Low Voltage Cables
  • IEEE 1145-1990 – IEEE Recommended Practice for Installation and Maintenance of Nickel-Cadmium Batteries for Photovoltaic (PV) Systems
  • IEEE 1145-1999 – IEEE Recommended Practice for the Installation and Maintenance of Nickel-Cadmium Batteries for Photovoltaic (PV) Systems
  • IEEE 1147-1991 – IEEE Guide for the Rehabilitation of Hydroelectric Power Plants
  • IEEE 1147-2005 – IEEE Guide for the Rehabilitation of Hydroelectric Power Plants
  • IEEE 115-1983 – IEEE Guide: Test Procedures for Synchronous Machines
  • IEEE 115-1995 – IEEE Guide: Test Procedures for Synchronous Machines Part I–Acceptance and Performance Testing Part II-Test Procedures and Parameter Determination for Dynamic Analysis
  • IEEE 115-2009 – IEEE Guide for Test Procedures for Synchronous Machines Part I—Acceptance and Performance Testing Part II—Test Procedures and Parameter Determination for Dynamic Analysis
  • IEEE 115-2019 – IEEE Guide for Test Procedures for Synchronous Machines Including Acceptance and Performance Testing and Parameter Determination for Dynamic Analysis
  • IEEE 1159-1995 – IEEE Recommended Practice for Monitoring Electric Power Quality
  • IEEE 1159-2009 – IEEE Recommended Practice for Monitoring Electric Power Quality
  • IEEE 1159-2019 – IEEE Recommended Practice for Monitoring Electric Power Quality
  • IEEE 1159.3-2019 – IEEE Recommended Practice for Power Quality Data Interchange Format (PQDIF)
  • IEEE 1185-1994 – IEEE Guide for Installation Methods for Generating Station Cables
  • IEEE 1185-2010 – IEEE Recommended Practice for Cable Installation in Generating Stations and Industrial Facilities
  • IEEE 1185-2019 – IEEE Recommended Practice for Cable Installation in Generating Stations and Industrial Facilities
  • IEEE 1187-1996 – IEEE Recommended Practice for Installation Design and Installation of Valve-Regulated Lead-Acid Storage Batteries for Stationary Applications
  • IEEE 1187-2002 – IEEE Recommended Practice for Installation Design and Installation of Valve-Regulated Lead-Acid Batteries for Stationary Applications
  • IEEE 1187-2013 – IEEE Recommended Practice for Installation Design and Installation of Valve-Regulated Lead-Acid Batteries for Stationary Applications
  • IEEE 1189-1996 – IEEE Guide for Selection of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Applications
  • IEEE 1189-2007 – IEEE Guide for Selection of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Applications
  • IEEE 120-1989 – IEEE Master Test Guide for Electrical Measurements in Power Circuits
  • IEEE 1204-1997 – IEEE Guide for Planning DC Links Terminating at AC Locations Having Low Short-Circuit Capacities
  • IEEE 1205-1993 – IEEE Guide for Assessing, Monitoring and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations
  • IEEE 1205-2000/Cor 1-2006 – IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations – Corrigendum 1: Thermal Aging Model Corrections
  • IEEE 1207-2011 – IEEE Guide for the Application of Turbine Governing Systems for Hydroelectric Generating Units
  • IEEE 1215-2001 – IEEE Guide for the Application of Separable Insulated Connectors
  • IEEE 1215-2013 – IEEE Guide for the Application of Separable Insulated Connectors
  • IEEE 1215-2013 – IEEE Guide for the Application of Separable Insulated Connectors
  • IEEE 1216-2000 – IEEE Guide for the Application of Faulted Circuit Indicators for 200 A, Single-Phase Underground Residential Distribution (URD)
  • IEEE 1217-2001 – IEEE Guide for Preservative Treatment of Wood Distribution and Transmission Line Structures
  • IEEE 122-1985 – IEEE Recommended Practice for Functional Performance Characteristics of Control Systems for Steam Turbine-Generator Units
  • IEEE 122-1991 – IEEE Recommended Practice for Functional and Performance Characteristics of Control Systems for Steam Turbine-Generator Units
  • IEEE 1234-2007 – IEEE Guide for Fault Locating Techniques on Shielded Power Cable Systems
  • IEEE 1234-2019 – IEEE Guide for Fault-Locating Techniques on Shielded Power Cable Systems
  • IEEE 1235-2000 – IEEE Guide for the Properties of Identifiable Jackets for Underground Power Cables and Ducts
  • IEEE 1240-2000 – IEEE Guide for the Evaluation of the Reliability of HVDC Converter Stations
  • IEEE 1242-1999 – IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants
  • IEEE 1242-2016 – IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants
  • IEEE 1243-1997 – IEEE Guide for Improving the Lightning Performance of Transmission Lines
  • IEEE 1246-1997 – IEEE Guide for Temporary Protective Grounding Systems Used in Substations
  • IEEE 1246-2002 – IEEE Guide for Temporary Protective Grounding Systems Used in Substations
  • IEEE 1246-2011 – IEEE Guide for Temporary Protective Grounding Systems Used in Substations
  • IEEE 1246-2020 – IEEE Guide for Temporary Protective Grounding Systems Used in Substations
  • IEEE 1248-1998 – IEEE Guide for the Commissioning of Electrical Systems in Hydroelectric Power Plants
  • IEEE 1248-2020 – IEEE Guide for the Commissioning of Electrical Systems in Hydroelectric Power Plants
  • IEEE 125-1977 – IEEE Recommended Practice for Preparation of Equipment Specifications for Speed Governing of Hydraulic Turbines Intended to Drive Electric Generators
  • IEEE 125-2007 – IEEE Recommended Practice for Preparation of Equipment Specifications for Speed-Governing of Hydraulic Turbines Intended to Drive Electric Generators
  • IEEE 1250-2018 – IEEE Guide for Identifying and Improving Voltage Quality in Power Systems
  • IEEE 1255-2000 – IEEE Guide for Evaluation of Torque Pulsations During Starting of Synchronous Motors
  • IEEE 1264-1993 – IEEE Guide for Animal Deterrents for Electric Power Supply Substations
  • IEEE 1264-2015 – IEEE Guide for Animal Deterrents for Electric Power Supply Substations
  • IEEE 1267-1999 – IEEE Guide for Development of Specification for Turnkey Substation Projects
  • IEEE 1267-2019 – IEEE Guide for Development of Specifications for Turnkey Substation Projects
  • IEEE 1267-2019 – IEEE Guide for Development of Specifications for Turnkey Substation Projects
  • IEEE 1268-1997 – IEEE Guide for the Safe Installation of Mobile Substation Equipment
  • IEEE 1268-2005 – IEEE Guide for Safety in the Installation of Mobile Substation Equipment
  • IEEE 1268-2016 – IEEE Guide for Safety in the Installation of Mobile Substation Equipment
  • IEEE 1276-1997 – IEEE Guide for the Application of High-Temperature Insulation Materials in Liquid-Immersed Power Transformers
  • IEEE 1276-2020 – IEEE Guide for the Application of High-Temperature Insulation Materials in Liquid-Immersed Distribution, Power, and Regulating Transformers
  • IEEE 1283-2004 – IEEE Guide for Determining the Effects of High Temperature Operation on Conductors, Connectors, and Accessories
  • IEEE 1283-2013 – IEEE Guide for Determining the Effects of High-Temperature Operation on Conductors, Connectors, and Accessories
  • IEEE 1290-1996 – IEEE Guide for Motor Operated Valve (MOV) Motor Application, Protection, Control, and Testing in Nuclear Power Generating Stations
  • IEEE 1291-1993 – IEEE Guide for Partial Discharge Measurement in Power Switchgear
  • IEEE 1300-1996 – IEEE Guide for Cable Connections for Gas-Insulated Substations
  • IEEE 1300-2011 – IEEE Guide for Cable Connections for Gas-Insulated Substations
  • IEEE 1303-1994 – IEEE Guide for Static Var Compensator Field Tests
  • IEEE 1303-2011 – IEEE Guide for Static Var Compensator Field Tests
  • IEEE 1307-1996 – IEEE Trial Use Guide for Fall Protection for the Utility Industry
  • IEEE 1310-1996 – IEEE Recommended Practice for Thermal Cycle Testing of Form-Wound Stator Bars and Coils for Large Generators
  • IEEE 1310-2012 – IEEE Recommended Practice for Thermal Cycle Testing of Form-Wound Stator Bars and Coils for Large Rotating Machines
  • IEEE 1366-1998 – IEEE Guide for Electric Power Distribution Reliability Indices
  • IEEE 1368-2006 – IEEE Guide for Aeolian Vibration Field Measurements of Overhead Conductors
  • IEEE 1374-1998 – IEEE Guide for Terrestrial Photovoltaic Power System Safety
  • IEEE 1378-1997 – IEEE Guide for Commissioning High-Voltage Direct-Current (HVDC) Converter Stations and Associated Transmission Systems
  • IEEE 1379-1997 – IEEE Recommended Practice for Data Communications Between Intelligent Electronic Devices and Remote Terminal Units in a Substation
  • IEEE 1406-1998 – IEEE Guide to the Use of Gas-In-Fluid Analysis for Electric Power Cable Systems
  • IEEE 1407-1998 – IEEE Guide for Accelerated Aging Tests for Medium-Voltage Extruded Electric Power Cables Using Water-Filled Tanks
  • IEEE 1407-2007 – IEEE Guide for Accelerated Aging Tests for Medium-Voltage (5 kV-35 kV) Extruded Electric Power Cables Using Water-Filled Tanks
  • IEEE 141-1986 – IEEE Recommended Practice for Electric Power Distribution for Industrial Plants (IEEE Red Book)
  • IEEE 1410-1997 – IEEE Guide for Improving the Lightning Performance of Electric Power Overhead Distribution Lines
  • IEEE 1410-2010 – IEEE Guide for Improving the Lightning Performance of Electric Power Overhead Distribution Lines
  • IEEE 1410-2010 – IEEE Guide for Improving the Lightning Performance of Electric Power Overhead Distribution Lines
  • IEEE 1415-2006 – IEEE Guide for Induction Machinery Maintenance Testing and Failure Analysis
  • IEEE 142-1956 – IEEE Grounding of Industrial Power Systems
  • IEEE 142-1982 – IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems (IEEE Green Book)
  • IEEE 142-1991 – IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems
  • IEEE 142-2007 – IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems
  • IEEE 1425-2001 – IEEE Guide for the Evaluation of the Remaining Life of Impregnated Paper-Insulated Transmission Cable Systems
  • IEEE 1427-2006 – IEEE Guide for Recommended Electrical Clearances and Insulation Levels in Air Insulated Electrical Power Substations
  • IEEE 1427-2020 – IEEE Guide for Recommended Electrical Clearances and Insulation Levels in Air Insulated Electrical Power Substations
  • IEEE 1428-2004 – IEEE Guide for Installation Methods for Fiber Optic Cables in Electric Power Generating Stations and in Industrial Facilities
  • IEEE 1430-1996 – IEEE Guide for Information Technology Software Reuse-Concept of Operations for Interoperating Reuse Libraries [Developed in cooperation with the Reuse Library Interoperability Group (RIG)]
  • IEEE 1441-2004 – IEEE Guide for Inspection of Overhead Transmission Line Construction
  • IEEE 1458-2017 – IEEE Recommended Practice for the Selection, Field Testing, and Life Expectancy of Molded-Case Circuit Breakers for Industrial Applications
  • IEEE 1491-2012 – IEEE Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications
  • IEEE 1493-2006 – IEEE Guide for the Evaluation of Solvents Used for Cleaning Electrical Cables and Accessories
  • IEEE 1511-2004 – IEEE Guide for Investigating and Analyzing Power Cable, Joint, and Termination Failures on Systems Rated 5 kV Through 46 kV
  • IEEE 1511.1-2010 – IEEE Guide for Investigating and Analyzing Shielded Power Cable Failures on Systems Rated 5 kV Through 46 kV
  • IEEE 1513-2001 – IEEE Recommended Practice for Qualification of Concentrator Photovoltaic (PV) Receiver Sections and Modules
  • IEEE 1515-2000 – IEEE Recommended Practice for Electronic Power Subsystems: Parameter Definitions, Test Conditions, and Test Methods
  • IEEE 1523-2002 – IEEE Guide for the Application, Maintenance, and Evaluation of Room Temperature Vulcanizing (RTV) Silicone Rubber Coatings for Outdoor Ceramic Insulators
  • IEEE 1523-2018 – IEEE Guide for the Application, Maintenance, and Evaluation of Room-Temperature Vulcanizing (RTV) Silicone Rubber Coatings for Outdoor Ceramic Insulators
  • IEEE 1526-2020 – IEEE Recommended Practice for Testing the Performance of Stand-Alone Photovoltaic Systems
  • IEEE 1527-2006 – IEEE Recommended Practice for the Design of Flexible Buswork Located in Seismically Active Areas
  • IEEE 1527-2018 – IEEE Recommended Practice for the Design of Buswork Located in Seismically Active Areas
  • IEEE 1538-2000 – IEEE Guide for Determination of Maximum Winding Temperature Rise in Liquid-Filled Transformers
  • IEEE 1538a-2015 – IEEE Guide for Determination of Maximum Winding-Temperature Rise in Liquid Immersed Transformers — Amendment 1
  • IEEE 1564-2014 – IEEE Guide for Voltage Sag Indices
  • IEEE 1573-2003 – IEEE Recommended Practice for Electronic Power Subsystems: Parameters, Interfaces, Elements, and Performance
  • IEEE 1578-2007 – IEEE Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management
  • IEEE 1578-2018 – IEEE Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management
  • IEEE 1578-2018 – IEEE Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management
  • IEEE 1584-2018 – IEEE Guide for Performing Arc-Flash Hazard Calculations

Disclaimer : jika ada perbedaan antara daftar nama di artikel ini dengan artikel asli dari ieee.org, maka pembaca harus mengikuti artikel asli dari ieee.org tersebut.

Demikian artikel dari standarku.com mengenai Daftar Standar IEEE part 16 Power and Energy sub part 5.

Mohon saran dari pembaca untuk kelengkapan isi artikel ini, silahkan saran tersebut dapat disampaikan melalui kolom komentar.

Baca artikel lain :

Sumber referensi :

Related Posts:

  • Mengenal standar ANSI ANSI (American National Standards Institute) adalah organisasi nirlaba swasta yang mengawasi pengembangan standar yang disetujui secara sukarela untuk produk, layanan, proses, sistem, dan personel di Amerika Serikat. Tujuan Standar ANSI…
  • ISO IEC IEEE 15026-1 Bibliografi ISO IEC IEEE 15026-1 Bibliografi adalah Daftar Pustaka Standar Internasional mengenai systems and software engineering atau sistem dan rekayasa perangkat lunak, khususnya tentang systems and software assurance part 1: concepts…
  • ISO IEC IEEE 15026-1 software assurance concepts ISO IEC IEEE 15026-1 adalah Standar Internasional mengenai systems and software engineering atau sistem dan rekayasa perangkat lunak, khususnya tentang systems and software assurance part 1: concepts and vocabulary atau…
  • Daftar Standar IEEE part 12-14 Daftar Standar IEEE part 12-14 adalah kumpulan judul standar IEEE dengan lingkup : Instrumentation and Measurement, Nanotechnology, National Electrical Safety Code (NESC). Standar IEEE merupakan suatu standar yang diterbitkan oleh…
  • ISO IEC IEEE 15939 software engineering measurement ISO IEC IEEE 15939 adalah Standar Internasional mengenai Measurement process (Proses pengukuran) pada Systems and software engineering (Rekayasa sistem dan perangkat lunak). Standar versi terbaru yang masih berlaku adalah terbitan…
  • ISO 50002 Standar Audit Energi ISO 50002 adalah Standar Internasional mengenai persyaratan dengan panduan penggunaan dari Audit energi atau Energy audits. Standar versi terbaru yang masih berlaku adalah terbitan tahun 2014 dengan judul berikut :…
  • Standar Electrical Engineer Electrical Engineer merupakan salah satu profesi yang populer dan banyak dibutuhkan khususnya di bidang teknik, nah apa sajakah standar untuk menjadi seorang Electrical Engineer? Definisi Electrical Engineer Secara bahasa, istilah…
  • Daftar Standar ISO 8600-8999 Daftar Standar ISO 8600-8999 adalah kumpulan judul dari Standar nomor ISO 8600 hingga ISO 8999 yang diterbitkan oleh badan ISO Internasional. Mengenai Standar ISO ISO (International Organization for Standardization) adalah…
  • Standar ISO/IEC 29110 Standar ISO/IEC 29110 adalah standar dari badan ISO dan IEC mengenai Systems and Software Life Cycle Profiles and Guidelines for Very Small Entities (VSE). Standar ISO/IEC 29110 Judul standar ini…
  • Daftar Standar IEEE Power and Energy 4 Daftar Standar IEEE Power and Energy 4 adalah kumpulan judul standar IEEE dengan lingkup : Power and Energy sub part 4. Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi…
  • ISO IEC 13213 bus mikrokomputer ISO IEC 13213 adalah Standar Internasional mengenai teknologi informasi, khususnya tentang arsitektur Control and Status Registers (CSR) untuk bus mikrokomputer dalam sistem mikroprosesor. Standar versi terbaru yang masih berlaku adalah…
  • Standar Teknik Elektronika Teknik elektronika atau Electronic Engineering adalah cabang teknik elektro yang memanfaatkan komponen listrik dalam pembuatan sirkuit atau perangkat elektronika. Pengertian Komponen listrik yang dimaksud dalam pengertian pada paragraf pertama diatas…
  • Daftar Standar IEEE part 1-5 Daftar Standar IEEE part 1-5 adalah kumpulan judul standar IEEE dengan lingkup : Aerospace Electronics, Antennas and Propagation, Batteries, Blockchain, Communications. Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi…
  • Daftar Standar IEEE Power and Energy 3 Daftar Standar IEEE Power and Energy 3 adalah kumpulan judul standar IEEE dengan lingkup : Power and Energy sub part 3. Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi…
  • ISO IEC IEEE 15026-4 software assurance life cycle ISO IEC IEEE 15026-4 adalah Standar Internasional mengenai systems and software engineering atau sistem dan rekayasa perangkat lunak, khususnya tentang systems and software assurance part 4: Assurance in the life…

Leave a Comment