Daftar Standar IEEE Power and Energy 6

Daftar Standar IEEE Power and Energy 6 adalah kumpulan judul standar IEEE dengan lingkup : Power and Energy sub part 6.

Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi IEEE, yang penamaan nya diawali dengan kode “IEEE”.

IEEE SA (Standards Association) adalah organisasi pembangun konsensus terkemuka yang memelihara, mengembangkan, dan memajukan teknologi global, melalui IEEE.

Artikel ini adalah lanjutan dari artikel sebelumnya dari standarku.com mengenai organisasi IEEE SA berikut :

Jadi artikel ini ditujukan untuk membantu pembaca dalam mencari apa saja judul standar IEEE yang dibutuhkan.

Untuk mempermudah pencarian judul standar, disini kami cantumkan pembagian berdasarkan klasifikasi berikut.

Klasifikasi Standar IEEE

Standar IEEE dibagi menjadi 21 klasifikasi sebagaimana berikut :

  1. Aerospace Electronics
  2. Antennas and Propagation
  3. Batteries
  4. Blockchain
  5. Communications
  6. Computer Technology
  7. Consumer Electronics
  8. Electromagnetic Compatibility
  9. Green and Clean Technology
  10. Healthcare IT
  11. Industry Applications
  12. Instrumentation and Measurement
  13. Nanotechnology
  14. National Electrical Safety Code (NESC)
  15. Nuclear Power
  16. Power and Energy
  17. Power Electronics
  18. Smart Grid
  19. Software and Systems Engineering
  20. Transportation
  21. Wired and Wireless Communications

Dikarenakan standar IEEE sangat banyak jumlahnya, maka akan dibagi menjadi beberapa artikel seri Daftar Standar IEEE.

Pada artikel sebelumnya mencakup kategori yang pertama hingga ke 15 sebagaimana berikut :

Pada artikel kali ini mencakup kategori yang ke 16 (part 16) yakni : Power and Energy.

Kategori Power and Energy memiliki jumlah standar yang sangat banyak, oleh karena itu kami bagi lagi menjadi beberapa sub part artikel.

Artikel ini merupakan sebagian daftar judul dari kategori Power and Energy untuk sub part 6.

Kategori lain akan dilanjutkan pada artikel dari standarku.com berikutnya.

Kolaborasi Organisasi Pengembang Standar

Pada beberapa judul artikel di kategori ini ada yang merupakan hasil kolaborasi antara IEEE dengan organisasi pengembang standar lain seperti :

  • ISO (International Organization for Standardization), adalah suatu organisasi atau lembaga nirlaba internasional, yang bertujuan untuk membuat dan memperkenalkan standar dan standardisasi internasional untuk berbagai tujuan.
  • IEC, adalah organisasi standardisasi internasional yang menyusun dan menerbitkan standar-standar internasional untuk seluruh bidang elektrik, elektronik dan teknologi yang terkait atau bidang teknologi elektro (electrotechnology).
  • ANSI (American National Standards Institute), adalah organisasi nirlaba swasta yang mengawasi pengembangan standar yang disetujui secara sukarela untuk produk, layanan, proses, sistem, dan personel di Amerika Serikat.

Seperti yang ditunjukkan pada judul dengan kode awalan nama gabungan sebagaimana berikut :

  • IEEE/IEC
  • IEEE/ISO/IEC
  • IEEE/ISO
  • IEEE/ANSI
  • ANSI/AAMI
  • IEEE/AIEE

Lebih jelas mengenai organisasi pengembang standar lain diatas dapat dibaca pada artikel lain dari standarku.com berikut :

Daftar Standar IEEE

Berikut adalah judul standar-standar IEEE part 16 yang dikutip dari ieee.org per 25 Agustus 2021 :

Daftar Standar IEEE Power and Energy 6

  • IEEE 1584.1-2013 – IEEE Guide for the Specification of Scope and Deliverable Requirements for an Arc-Flash Hazard Calculation Study in Accordance with IEEE Std 1584(TM)
  • IEEE 1584a-2004 – IEEE Guide for Performing Arc-Flash Hazard Calculations–Amendment 1
  • IEEE 1584b-2011 – IEEE Guide for Performing Arc-Flash Hazard Calculations–Amendment 2: Changes to Clause 4
  • IEEE 1585-2002 – IEEE Guide for the Functional Specification of Medium Voltage (1- 35kV) Electronic Series Devices for Compensation of Voltage Fluctuations
  • IEEE 1610-2007 – IEEE Guide for the Application of Faulted Circuit Indicators for 200 / 600 A, Three-phase Underground Distribution
  • IEEE 1610-2016 – IEEE Guide for the Application of Faulted Circuit Indicators on Distribution Circuits
  • IEEE 1617-2007 – IEEE Guide for Detection, Mitigation, and Control of Concentric Neutral Corrosion in Medium-Voltage Underground Cables
  • IEEE 1623-2004 – IEEE Guide for the Functional Specification of Medium Voltage (1 kV – 35 kV) Electronic Shunt Devices for Dynamic Voltage Compensation
  • IEEE 1623-2004 – IEEE Guide for the Functional Specification of Medium Voltage (1 kV – 35 kV) Electronic Shunt Devices for Dynamic Voltage Compensation
  • IEEE 1623-2020 – IEEE Guide for the Functional Specification of Medium Voltage (1kV to 35kV) Electronic Shunt Devices for Dynamic Voltage Compensation
  • IEEE 1637-2010 – IEEE Guide to Select Terminations for Shielded Alternating-Current Power Cable Rated 5 kV – 46 kV
  • IEEE 1637-2020 – IEEE Guide for Selection and Application of Terminations for Shielded AC Power Cable Rated 5 kV to 46 kV
  • IEEE 1651-2010 – IEEE Guide for Reducing Bird-Related Outages
  • IEEE 1654-2009 – IEEE Guide for RF Protection of Personnel Working in the Vicinity of Wireless Communications Antennas Attached to Electric Power Line Structures
  • IEEE 1656-2010 – IEEE Guide for Testing the Electrical, Mechanical, and Durability Performance of Wildlife Protective Devices on Overhead Power Distribution Systems Rated up to 38 kV
  • IEEE 1657-2018 – IEEE Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries
  • IEEE 1662-2008 – IEEE Guide for the Design and Application of Power Electronics in Electrical Power Systems on Ships
  • IEEE 1665-2009 – IEEE Guide for the Rewind of Synchronous Generators, 50 Hz and 60 Hz, Rated 1 MVA and Above
  • IEEE 1668-2014 – IEEE Trial-Use Recommended Practice for Voltage Sag and Short Interruption Ride-Through Testing for End-Use Electrical Equipment Rated Less than 1000 V
  • IEEE 1668-2017 – IEEE Recommended Practice for Voltage Sag and Short Interruption Ride-Through Testing for End-Use Electrical Equipment Rated Less than 1000 V
  • IEEE 1676-2010 – IEEE Guide for Control Architecture for High Power Electronics (1 MW and Greater) Used in Electric Power Transmission and Distribution Systems
  • IEEE 1695-2016 – IEEE Guide to Understanding, Diagnosing, and Mitigating Stray and Contact Voltage
  • IEEE 1709-2010 – IEEE Recommended Practice for 1 kV to 35 kV Medium-Voltage DC Power Systems on Ships
  • IEEE 1716-2014 – IEEE Recommended Practice for Managing Natural Disaster Impact on Key Electrical Systems and Installations in Petroleum and Chemical Facilities
  • IEEE 1718-2012 – IEEE Guide for Temperature Monitoring of Cable Systems
  • IEEE 1724-2011 – IEEE Guide for the Preparation of a Transmission Line Design Criteria Document
  • IEEE 1727-2013 – IEEE Guide for Working Procedures on Underground Transmission Circuits with Induced Voltage
  • IEEE 1727-2013/Cor 1-2015 – IEEE Guide for Working Procedures on Underground Transmission Circuits with Induced Voltage — Corrigendum 1
  • IEEE 1729-2014 – IEEE Recommended Practice for Electric Power Distribution System Analysis
  • IEEE 1732-2017 – IEEE Recommended Practice for Space Charge Measurements on High-Voltage Direct-Current Extruded Cables for Rated Voltages up to 550 kV
  • IEEE 1776-2008 – IEEE Recommended Practice for Thermal Evaluation of Unsealed or Sealed Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils for Machines Rated 15 000 V and Below
  • IEEE 1782-2014 – IEEE Guide for Collecting, Categorizing, and Utilizing Information Related to Electric Power DistributionInterruption Events
  • IEEE 1789-2015 – IEEE Recommended Practices for Modulating Current in High-Brightness LEDs for Mitigating Health Risks to Viewers
  • IEEE 1793-2012 – IEEE Guide for Planning and Designing Transition Facilities between Overhead and Underground Transmission Lines
  • IEEE 1799-2012 – IEEE Recommended Practice for Quality Control Testing of External Discharges on Stator Coils, Bars, and Windings
  • IEEE 1799-2012 – IEEE Recommended Practice for Quality Control Testing of External Discharges on Stator Coils, Bars, and Windings
  • IEEE 1806-2021 – IEEE Guide for Reliability-Based Placement of Overhead and Underground Switching and Overcurrent Protection Equipment up to and Including 38 kV
  • IEEE 1810-2017 – IEEE Guide for the Installation of Fire-Rated Cables Suitable for Hydrocarbon Pool Fires for Critical and Emergency Shutdown Systems in Petroleum and Chemical Industries
  • IEEE 1816-2013 – IEEE Guide for Preparation Techniques of Extruded Dielectric, Shielded Cables Rated 2.5 kV through 46 kV and the Installation of Mating Accessories
  • IEEE 1818-2017 – IEEE Guide for the Design of Low-Voltage Auxiliary Systems for Electric Power Substations
  • IEEE 1820-2020 – IEEE Guide on the Selection of Transmission and Distribution Insulators with Respect to Cold Weather Conditions
  • IEEE 1827-2016 – IEEE Guide for Electrical and Control Design of Hydroelectric Water Conveyance Facilities
  • IEEE 1860-2014 – IEEE Guide for Voltage Regulation and Reactive Power Compensation at 1000 kV AC and Above
  • IEEE 1861-2014 – IEEE Guide for On-Site Acceptance Tests of Electrical Equipment and System Commissioning of 1000 kV AC and Above
  • IEEE 1863-2019 – IEEE Guide for Overhead AC Transmission Line Design
  • IEEE 1863-2019 – IEEE Guide for Overhead AC Transmission Line Design
  • IEEE 1870-2019 – IEEE Guide for the Parameter Measurement of AC Transmission Lines
  • IEEE 1893-2015 – IEEE Guide for the Measurement of DC Transmission Line and Earth Electrode Line Parameters
  • IEEE 1899-2017 – IEEE Guide for Establishing Basic Requirements for High-Voltage Direct-Current Transmission Protection and Control Equipment
  • IEEE 219-1961 – IEEE Recommended Practice on Audio and Electro Acoustics Loudspeaker Measurements 1961
  • IEEE 219-1975 – IEEE Recommended Practice for Loudspeaker Measurements
  • IEEE 251-1984 – IEEE Guide: Test Procedures for Direct-Current Tachometer Generators
  • IEEE 252-1977 – IEEE Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap
  • IEEE 258-1965 – IEEE Test Procedure for Close-Talking Pressure-Type Microphones
  • IEEE 265-1966 – IEEE Recommended Practices for Burst Measurements in the Frequency Domain
  • IEEE 266-1969 – IEEE Test Procedure for Evaluation of Insulation Systems for Electronics Power Transformers
  • IEEE 273-1967 – IEEE Guide for Protective Relay Applications to Power transformers
  • IEEE 2740-2020 – IEEE Guide for Selection and Installation of Electrical Cables and Cable Systems in Hazardous (Classified) Locations on Oil and Gas Land Drilling Rigs
  • IEEE 2745.1-2019 – IEEE Guide for Technology of Unified Power Flow Controller Using Modular Multilevel Converter – Part 1: Functions
  • IEEE 2745.1-2019 – IEEE Guide for Technology of Unified Power Flow Controller Using Modular Multilevel Converter – Part 1: Functions
  • IEEE 2745.2-2021 – IEEE Approved Draft Guide for Technology of Unified Power Flow Controller Using Modular Multilevel Converter: Part 2 Terminology
  • IEEE 2745.3-2020 – IEEE Guide for Technology of Unified Power Flow Controller Using Modular Multilevel Converter–Part 3: Thyristor Bypass Switch
  • IEEE 2747-2020 – IEEE Guide for Energy Efficiency Technology Evaluation of Electric Power Fittings
  • IEEE 275-1992 – IEEE Recommended Practice for Thermal Evaluation of Insulation Systems for Alternating-Current Electric Machinery Employing Form-Wound Preinsulated Stator Coils for Machines Rated 6900 V and Below
  • IEEE 2760-2020 – IEEE Guide for Wind Power Plant Grounding System Design for Personnel Safety
  • IEEE 277-1975 – IEEE Recommended Practice for Cement Plant Power Distribution
  • IEEE 277-1983 – IEEE Recommended Practice for Cement Plant Power Distribution
  • IEEE 277-2007 – IEEE Recommended Practice for Cement Plant Power Distribution
  • IEEE 2778-2020 – IEEE Guide for Solar Power Plant Grounding for Personnel Protection
  • IEEE 2778-2020 – IEEE Guide for Solar Power Plant Grounding for Personnel Protection
  • IEEE 282-1968 – IEEE Proposed IEEE Recommended Specification for Speed Governing and Temperature Protection of Gas Turbines Intended to Drive Electric Generators
  • IEEE 2821-2020 – IEEE Guide for Unmanned Aerial Vehicle-Based Patrol Inspection System for Transmission Lines
  • IEEE 2828-2021 – IEEE Guide for Measuring Method of Overhead Power Transmission Line Galloping Based on Monocular Video
  • IEEE 2836-2021 – IEEE Recommended Practice for Performance Testing of Electrical Energy Storage (EES) System in Electric Charging Stations in Combination with Photovoltaic (PV)
  • IEEE 286-1975 – IEEE Recommended Practice for Measurement of Power-Factor Tip-Up of Rotating Machinery Stator Coil Insulation
  • IEEE 286-2000 – IEEE Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation
  • IEEE 286-2000 – IEEE Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation
  • IEEE 2862-2020 – IEEE Recommended Practice for Partial Discharge Measurements under AC Voltage with VHF/UHF Sensors during Routine Tests on Factory and Pre-Molded Joints of HVDC Extruded Cable Systems up to 800 kV
  • IEEE 297-1969 – IEEE Recommended Practice for Speech Quality Measurements
  • IEEE 3001.11-2017 – IEEE Recommended Practice for Application of Controllers and Automation to Industrial and Commercial Power Systems
  • IEEE 3001.5-2013 – IEEE Recommended Practice for the Application of Power Distribution Apparatus in Industrial and Commercial Power Systems
  • IEEE 3001.8-2013 – IEEE Recommended Practice for the Instrumentation and Metering of Industrial and Commercial Power Systems
  • IEEE 3002.2-2018 – IEEE Recommended Practice for Conducting Load-Flow Studies and Analysis of Industrial and Commercial Power Systems
  • IEEE 3002.3-2018 – IEEE Recommended Practice for Conducting Short-Circuit Studies and Analysis of Industrial and Commercial Power Systems
  • IEEE 3002.7-2018 – IEEE Recommended Practice for Conducting Motor-Starting Studies and Analysis of Industrial and Commercial Power Systems
  • IEEE 3002.8-2018 – IEEE Recommended Practice for Conducting Harmonic Studies and Analysis of Industrial and Commercial Power Systems
  • IEEE 3003.1-2019 – IEEE Recommended Practice for System Grounding of Industrial and Commercial Power Systems
  • IEEE 3003.1-2019 – IEEE Recommended Practice for System Grounding of Industrial and Commercial Power Systems
  • IEEE 3003.2-2014 – IEEE Recommended Practice for Equipment Grounding and Bonding in Industrial and Commercial PowerSystems
  • IEEE 3004.1-2013 – IEEE Recommended Practice for the Application of Instrument Transformers in Industrial and Commercial Power Systems
  • IEEE 3004.11-2019 – IEEE Recommended Practice for Bus and Switchgear Protection in Industrial and Commercial Power Systems
  • IEEE 3004.11-2019 – IEEE Recommended Practice for Bus and Switchgear Protection in Industrial and Commercial Power Systems
  • IEEE 3004.5-2014 – IEEE Recommended Practice for the Application of Low-Voltage Circuit Breakers in Industrial and Commercial Power Systems
  • IEEE 3004.8-2016 – IEEE Recommended Practice for Motor Protection in Industrial and Commercial Power Systems
  • IEEE 3006.2-2016 – IEEE Recommended Practice for Evaluating the Reliability of Existing Industrial and Commercial Power Systems
  • IEEE 3006.3-2017 – IEEE Recommended Practice for Determining the Impact of Preventative Maintenance on the Reliability of Industrial and Commercial Power Systems
  • IEEE 3006.5-2014 – IEEE Recommended Practice for the Use of Probability Methods for Conducting a Reliability Analysis ofIndustrial and Commercial Power Systems
  • IEEE 3006.7-2013 – IEEE Recommended Practice for Determining the Reliability of 7×24 Continuous Power Systems in Industrial and Commercial Facilities
  • IEEE 3006.9-2013 – IEEE Recommended Practice for Collecting Data for Use in Reliability, Availability, and Maintainability Assessments of Industrial and Commercial Power Systems
  • IEEE 3007.1-2010 – IEEE Recommended Practice for the Operation and Management of Industrial and Commercial Power Systems
  • IEEE 3007.2-2010 – IEEE Recommended Practice for the Maintenance of Industrial and Commercial Power Systems
  • IEEE 3007.2-2010 – IEEE Recommended Practice for the Maintenance of Industrial and Commercial Power Systems
  • IEEE 3007.3-2012 – IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems
  • IEEE 303-1984 – IEEE Recommended Practice for Auxiliary Devices for Motors in Class 1 – Groups A, B, C, and D, Division 2 Locations
  • IEEE 303-1991 – IEEE Recommended Practice for Auxiliary Devices for Motors in Class I, Groups A,B,C, and D, Division 2 Locations
  • IEEE 357-1973 – IEEE Guide for Protective Relaying of Utility-Consumer Interconnections
  • IEEE 367-1987 – IEEE Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault
  • IEEE 368-1977 – IEEE Recommended Practice for Measurement of Electrical Noise and Harmonic Filter Performance of High-Voltage Direct-Current Systems
  • IEEE 389-1979 – IEEE Recommended Practice for Testing Electronics Transformers and Inductors
  • IEEE 389-1990 – IEEE Recommended Practice for Testing Electronic Transformers and Inductors
  • IEEE 389-1996 – IEEE Recommended Practice for Testing Electronics Transformers and Inductors
  • IEEE 389-2020 – IEEE Recommended Practice for Testing Transformers and Inductors for Electronics Applications
  • IEEE 392-1976 – IEEE Recommended Practice for Achieving High Reliability in Electronics Transformers and Inductors
  • IEEE 399-1980 – IEEE Recommended Practice for Power System Analysis (IEEE Brown Book)
  • IEEE 399-1990 – IEEE Recommended Practice for Industrial and Commercial Power System Analysis
  • IEEE 400-1980 – IEEE Guide for Making High-Direct-Voltage Tests on Power Cable Systems in the Field
  • IEEE 400-1991 – IEEE Guide for Making High-Direct-Voltage Tests on Power Cable Systems in the Field
  • IEEE 400-2001 – IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems
  • IEEE 400-2012 – IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems Rated 5 kV and Above
  • IEEE 400.1-2007 – IEEE Guide for Field Testing of Laminated Dielectric, Shielded Power Cable Systems Rated 5 kV and Above with High Direct Current Voltage
  • IEEE 400.1-2018 – IEEE Guide for Field Testing of Laminated Dielectric, Shielded AC Power Cable Systems Rated 5 kV to 500 kV Using High Voltage Direct Current (HVDC)
  • IEEE 400.2-2004 – IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)
  • IEEE 400.2-2013 – IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz)
  • IEEE 400.3-2006 – IEEE Guide for Partial Discharge Testing of Shielded Power Cable Systems in a Field Environment
  • IEEE 400.4-2015 – IEEE Guide for Field Testing of Shielded Power Cable Systems Rated 5 kV and Above with Damped Alternating Current (DAC) Voltage
  • IEEE 402-1974 – IEEE Guide for Measuring Resistivity of Cable-Insulation Materials at High Direct Voltages
  • IEEE 420-1973 – IEEE Trial Use Guide for Class 1E Control Switchboards for Nuclear Power Generating Stations
  • IEEE 421.4-1990 – IEEE Guide for the Preparation of Excitation System Specifications
  • IEEE 421.4-2014 – IEEE Guide for the Preparation of Excitation System Specifications
  • IEEE 421.5-1992 – IEEE Recommended Practice for Excitation System Models for Power System Stability Studies
  • IEEE 421.5-2005 – IEEE Recommended Practice for Excitation System Models for Power System Stability Studies
  • IEEE 421.5-2016 – IEEE Recommended Practice for Excitation System Models for Power System Stability Studies
  • IEEE 422-1986 – IEEE Guide for the Design and Installation of Cable Systems in Power Generating Stations
  • IEEE 422-2012 – IEEE Guide for the Design of Cable Raceway Systems for Electric Generating Facilities
  • IEEE 429-1994 – IEEE Recommended Practice for Thermal Evaluation of Sealed Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-insulated Stator Coils for Machines Rated 6900 V and Below
  • IEEE 43-1974 – IEEE Recommended Practice for Testing Insulation Resistance of Rotating Machinery
  • IEEE 43-2000 – IEEE Recommended Practice for Testing Insulation Resistance of Rotating Machinery
  • IEEE 43-2013 – IEEE Recommended Practice for Testing Insulation Resistance of Electric Machinery
  • IEEE 432-1976 – IEEE Guide for Insulation Maintenance for Rotating Electrical Machinery (5 hp to less than 10 000 hp)
  • IEEE 432-1992 – IEEE Guide for Insulation Maintenance for Rotating Electric Machinery (5 hp to less than 10 000 hp)
  • IEEE 433-1974 – IEEE Recommended Practice for Insulation Testing of Large AC Rotating Machinery with High Voltage at Very Low Frequency
  • IEEE 433-2009 – IEEE Recommended Practice for Insulation Testing™ of AC Electric Machinery with High Voltage at Very Low Frequency
  • IEEE 434-1973 – IEEE Guide for Functional Evaluation of Insulation Systems for Large High-Voltage Machines
  • IEEE 434-2006 – IEEE Guide for Functional Evaluation of Insulation Systems for AC Electric Machines Rated 2300 V and Above
  • IEEE 436-1977 – IEEE Guide for Making Corona (Partial Discharge) Measurements on Electronics Transformers
  • IEEE 436-1991 – IEEE Guide for Making Corona (Partial Discharge) Measurements on Electronics Transformers
  • IEEE 442-1981 – IEEE Guide for Soil Thermal Resistivity Measurements
  • IEEE 442-2017 – IEEE Guide for Thermal Resistivity Measurements of Soils and Backfill Materials
  • IEEE 446-1987 – IEEE Recommended Practice for Emergency and Standby Power Systems for Industrial and Commercial Applications
  • IEEE 446-1995 – IEEE Recommended Practice for Emergency and Standby Power Systems for Industrial and Commercial Applications
  • IEEE 45-1998 – IEEE Recommended Practice for Electric Installations on Shipboard
  • IEEE 45-2002 – IEEE Recommended Practice for Electric Installations on Shipboard
  • IEEE 45.1-2017 – IEEE Recommended Practice for Electrical Installations on Shipboard–Design
  • IEEE 45.2-2011 – IEEE Recommended Practice for Electrical Installations on Shipboard — Controls and Automation
  • IEEE 45.3-2015 – IEEE Recommended Practice for Shipboard Electrical Installations — Systems Engineering
  • IEEE 45.5-2014 – IEEE Recommended Practice for Electrical Installations on Shipboard — Safety Considerations
  • IEEE 45.6-2016 – IEEE Recommended Practice for Electrical Installations on Shipboard–Electrical Testing
  • IEEE 45.7-2012 – IEEE Recommended Practice for Electrical Installations on Shipboard — AC Switchboards
  • IEEE 45.8-2016 – IEEE Recommended Practice for Electrical Installations on Shipboard–Cable Systems
  • IEEE 450-2002 – IEEE Recommended Practice for Maintenance, Testing , and Replacement of Vented Lead-Acid Batteries for Stationary Applications
  • IEEE 484-1996 – IEEE Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications
  • IEEE 484-2019 – IEEE Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications
  • IEEE 484-2019 – IEEE Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications
  • IEEE 485-2020 – IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications
  • IEEE 487-1980 – IEEE Guide for the Protection of Wire-Line Communication Facilities Serving Electric Power Stations
  • IEEE 487-1992 – IEEE Recommended Practice for the Protection of Wire-Line Communication Facilities Serving Electric Power Stations
  • IEEE 492-1974 – IEEE Guide for Operation and Maintenance of Hydro-Generators
  • IEEE 492-1999 – IEEE Guide for Operation and Maintenance of Hydro-Generators
  • IEEE 493-1980 – IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems (IEEE Gold Book)
  • IEEE 493-1990 – IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems
  • IEEE 493-1997 – IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems (Gold Book)
  • IEEE 493-2007 – IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems
  • IEEE 495-1986 – IEEE Guide for Testing Faulted Circuit Indicators
  • IEEE 495-2007 – IEEE Guide for Testing Faulted Circuit Indicators
  • IEEE 499-1974 – IEEE Recommended Practice for Cement Plant Electric Drives and Related Electrical Equipment
  • IEEE 499-1982 – IEEE Recommended Practices for Cement Plant Electric Drives and Related Electric Equipment
  • IEEE 499-1989 – IEEE Recommended Practice for Cement Plant Electric Drives and Related Electrical Equipment
  • IEEE 502-1985 – IEEE Guide for Protection, Interlocking, and Control of Fossil-Fueled Unit-Connected Steam Stations
  • IEEE 51-1955 – IEEE Guiding Principles for Dielectric Tests
  • IEEE 510-1983 – IEEE Recommended Practices for Safety in High-Voltage and High-Power Testing
  • IEEE 515-1983 – IEEE Recommended Practice for Electrical Resistance Heat Tracing
  • IEEE 515.1-1995 – IEEE Recommended Practice for the Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Commercial Applications
  • IEEE 516-1987 – IEEE Guide for Maintenance Methods on Energized Power-Lines
  • IEEE 516-1995 – IEEE Guide for Maintenance Methods on Energized Power Lines
  • IEEE 516-2003 – IEEE Guide for Maintenance Methods on Energized Power Lines
  • IEEE 516-2009 – IEEE Guide for Maintenance Methods on Energized Power Lines
  • IEEE 518-1977 – IEEE Guide for the Installation of Electrical Equipment to Minimize Electrical Noise Inputs to Controllers from External Sources
  • IEEE 519-1981 – IEEE Guide for Harmonic Control and Reactive Compensation of Static Power Convertors
  • IEEE 519-1992 – IEEE Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems
  • IEEE 522-1977 – IEEE Guide for Testing Turn-to-Turn Insulation on Form-Wound Stator Coils for Alternating-Current Rotating Electric Machines – For Trail Use
  • IEEE 522-1992 – IEEE Guide for Testing Turn-to-Turn Insulation on Form-Wound Stator Coils for Alternating-Current Rotating Electric Machines
  • IEEE 522-2004 – IEEE Guide for Testing Turn Insulation of Form-Wound Stator Coils for Alternating-Current Electric Machines
  • IEEE 524-1980 – IEEE Guide to the Installation of Overhead Transmission Line Conductors
  • IEEE 524-1992 – IEEE Guide to the Installation of Overhead Transmission Line Conductors
  • IEEE 524-2003 – IEEE Guide to the Installation of Overhead Transmission Line Conductors
  • IEEE 524-2016 – IEEE Guide for the Installation of Overhead Transmission Line Conductors
  • IEEE 524a-1993 – IEEE Guide to Grounding During the Installation of Overhead Transmission Line Conductors
  • IEEE 525-1978 – IEEE Guide for Selection and Installation of Control and Low-Voltage Cable Systems in Substations
  • IEEE 525-1987 – IEEE Guide for the Design and Installation of Cable Systems in Substations
  • IEEE 525-1992 – IEEE Guide for the Design and Installation of Cable Systems in Substations
  • IEEE 525-2007 – IEEE Guide for the Design and Installation of Cable Systems in Substations
  • IEEE 525-2016 – IEEE Guide for the Design and Installation of Cable Systems in Substations
  • IEEE 532-1982 – IEEE Guide for Selecting and Testing Jackets for Cables
  • IEEE 532-1993 – IEEE Guide for Selecting and Testing Jackets for Underground Cables
  • IEEE 532-2007 – IEEE Guide for Selecting and Testing Jackets for Power, Instrumentation, and Control Cables
  • IEEE 532-2021 – IEEE Guide for Selecting and Testing Jackets for Power, Instrumentation, and Control Cables
  • IEEE 551-2006 – IEEE Recommended Practice for Calculating AC Short-Circuit Currents in Industrial and Commercial Power Systems
  • IEEE 56-1977 – IEEE Guide for Insulation Maintenance of Large Alternating-Current Rotating Machinery (10,000 kVA and Larger)
  • IEEE 56-2016 – IEEE Guide for Insulation Maintenance of Electric Machines
  • IEEE 563-1978 – IEEE Guide on Conductor Self-Damping Measurements
  • IEEE 575-2014 – IEEE Guide for Bonding Shields and Sheaths of Single-Conductor Power Cables Rated 5 kV through 500 kV
  • IEEE 576-2000 – IEEE Recommended Practice for Installation, Termination, and Testing of Insulated Power Cable as Used in Industrial and Commercial Applications
  • IEEE 590-1977 – IEEE Cable Plowing Guide
  • IEEE 602-1986 – IEEE Recommended Practice for Electric Systems in Health Care Facilities
  • IEEE 602-1996 – IEEE Recommended Practice for Electric Systems in Health Care Facilities
  • IEEE 605-1987 – IEEE Guide for Design of Substation Rigid-Bus Structures
  • IEEE 605-1998 – IEEE Guide for the Design of Substation Rigid-Bus Structures
  • IEEE 605-2008 – IEEE Guide for Bus Design in Air Insulated Substations
  • IEEE 62-1978 – IEEE Guide for Field Testing Power Apparatus Insulation
  • IEEE 62-1995 – IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus – Part 1: Oil Filled Power Transformers, Regulators, and Reactors
  • IEEE 62.2-2004 – IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus – Electrical Machinery
  • IEEE 620-1987 – IEEE Guide for Construction and Interpretation of Thermal Limit Curves for Squirrel-Cage Motors Over 500 hp
  • IEEE 622A-1984 – IEEE Recommended Practice for the Design and Installation of Electric Pipe Heating Control and Alarm Systems for Power Generating Stations
  • IEEE 635-1978 – IEEE Guide for Selection and Design of Aluminum Sheaths for Power Cables
  • IEEE 635-2003 – IEEE Guide for Selection and Design of Aluminum Sheaths for Power Cables
  • IEEE 635-2003 – IEEE Guide for Selection and Design of Aluminum Sheaths for Power Cables
  • IEEE 637-1985 – IEEE Guide for the Reclamation of Insulating Oil and Criteria for Its Use
  • IEEE 64-1969 – IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment
  • IEEE 640-1985 – IEEE Guide for Power-Station Noise Control
  • IEEE 643-1980 – IEEE Guide for Power-Line Carrier Applications
  • IEEE 643-2004 – IEEE Guide for Power-Line Carrier Applications
  • IEEE 643-2004 – IEEE Guide for Power-Line Carrier Applications
  • IEEE 644-1979 – IEEE Recommended Practices for Measurement of Power Frequency Electric and Magnetic Fields from AC Power Lines
  • IEEE 664-1980 – IEEE Guide on the Measurement for the Performance of Aeolian Vibration Dampers for Single Conductors
  • IEEE 664-1993 – IEEE Guide for Laboratory Measurement of the Power Dissipation Characteristics of Aeolian Vibration Dampers for Single Conductors
  • IEEE 665-1987 – IEEE Guide for Generating Station Grounding
  • IEEE 665-1995 – IEEE Guide for Generating Station Grounding
  • IEEE 666-1991 – IEEE Design Guide for Electric Power Service Systems for Generating Stations
  • IEEE 666-2007 – IEEE Design Guide for Electric Power Service Systems for Generating Stations
  • IEEE 668-1987 – IEEE Recommended Practice for Electrical Heating Applications to Melting Furnaces and Forehearths in the Glass Industry
  • IEEE 67-1990 – IEEE Guide for Operation and Maintenance of Turbine Generators
  • IEEE 67-2005 – IEEE Guide for Operation and Maintenance of Turbine Generators
  • IEEE 676-1986 – IEEE Guide for Alarm Monitoring and Reporting Systems for Fossil-Fueled Power Generating Stations
  • IEEE 691-1985 – IEEE Trial-Use Guide for Transmission Structure Foundation Design

Disclaimer : jika ada perbedaan antara daftar nama di artikel ini dengan artikel asli dari ieee.org, maka pembaca harus mengikuti artikel asli dari ieee.org tersebut.

Demikian artikel dari standarku.com mengenai Daftar Standar IEEE part 16 Power and Energy sub part 6.

Mohon saran dari pembaca untuk kelengkapan isi artikel ini, silahkan saran tersebut dapat disampaikan melalui kolom komentar.

Baca artikel lain :

Sumber referensi :

Related Posts:

  • Daftar Standar Gratis SDO IBR Daftar Standar Gratis SDO IBR adalah kumpulan judul standar dari organisasi pengembangan standar untuk dibaca secara gratis, hasil kerjasama dengan ANSI IBR. Definisi SDO IBR Artikel ini merupakan lanjutan dari…
  • IEEE Standards Association IEEE SA (Standards Association) adalah organisasi pembangun konsensus terkemuka yang memelihara, mengembangkan, dan memajukan teknologi global, melalui IEEE Merupakan organisasi profesi yang terdiri dari para ahli bidang teknik yang mempromosikan…
  • ISO IEC IEEE 15026-4 Klausa 3 ISO IEC IEEE 15026-4 Klausa 3 adalah Standar Internasional mengenai systems and software engineering atau sistem dan rekayasa perangkat lunak, khususnya tentang systems and software assurance part 4: Assurance in…
  • ISO 50002 Standar Audit Energi ISO 50002 adalah Standar Internasional mengenai persyaratan dengan panduan penggunaan dari Audit energi atau Energy audits. Standar versi terbaru yang masih berlaku adalah terbitan tahun 2014 dengan judul berikut :…
  • Daftar Standar IEEE Power and Energy 3 Daftar Standar IEEE Power and Energy 3 adalah kumpulan judul standar IEEE dengan lingkup : Power and Energy sub part 3. Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi…
  • ISO IEC IEEE 15026-1 Bibliografi ISO IEC IEEE 15026-1 Bibliografi adalah Daftar Pustaka Standar Internasional mengenai systems and software engineering atau sistem dan rekayasa perangkat lunak, khususnya tentang systems and software assurance part 1: concepts…
  • Daftar Standar IEEE Power and Energy 2 Daftar Standar IEEE Power and Energy 2 adalah kumpulan judul standar IEEE dengan lingkup : Power and Energy sub part 2. Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi…
  • Standar ISO/IEC 29110 Standar ISO/IEC 29110 adalah standar dari badan ISO dan IEC mengenai Systems and Software Life Cycle Profiles and Guidelines for Very Small Entities (VSE). Standar ISO/IEC 29110 Judul standar ini…
  • ISO IEC 15026-1 IEEE notices-abstract ISO IEC IEEE 15026-1 IEEE notices and abstract adalah bagian dari Standar Internasional mengenai systems and software engineering atau sistem dan rekayasa perangkat lunak, khususnya tentang systems and software assurance…
  • Standar Teknik Elektronika Teknik elektronika atau Electronic Engineering adalah cabang teknik elektro yang memanfaatkan komponen listrik dalam pembuatan sirkuit atau perangkat elektronika. Pengertian Komponen listrik yang dimaksud dalam pengertian pada paragraf pertama diatas…
  • ISO IEC 15940 Software Engineering Environment Services ISO IEC 15940 adalah Standar Internasional mengenai systems and software engineering, khususnya tentang Software Engineering Environment Services. Standar versi terbaru yang masih berlaku adalah terbitan tahun 2013 dengan judul berikut…
  • ISO IEC IEEE 8802-A area networks ISO IEC IEEE 8802-A adalah Standar Internasional mengenai teknologi informasi, telekomunikasi dan pertukaran informasi antar sistem, khususnya tentang tinjauan dan arsitektur dari Local and metropolitan area networks. Standar versi terbaru…
  • Daftar Standar IEEE part 19-20 Daftar Standar IEEE part 19-20 adalah kumpulan judul standar IEEE dengan lingkup : Software and Systems Engineering, Transportation. Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi IEEE, yang penamaan…
  • Daftar Standar IEEE part 7-11 Daftar Standar IEEE part 7-11 adalah kumpulan judul standar IEEE dengan lingkup : Consumer Electronics, Electromagnetic Compatibility, Green and Clean Technology, Healthcare IT, Industry Applications. Standar IEEE merupakan suatu standar…
  • Daftar Standar IEEE part 1-5 Daftar Standar IEEE part 1-5 adalah kumpulan judul standar IEEE dengan lingkup : Aerospace Electronics, Antennas and Propagation, Batteries, Blockchain, Communications. Standar IEEE merupakan suatu standar yang diterbitkan oleh organisasi…

Leave a Comment