Daftar Standar ISO 14000-14499

Daftar Standar ISO 14000-14499 adalah kumpulan judul dari Standar nomor ISO 14000 hingga ISO 14499 yang diterbitkan oleh badan ISO Internasional.

Mengenai Standar ISO

ISO (International Organization for Standardization) adalah suatu organisasi atau lembaga nirlaba internasional.

Organisasi ini bertujuan untuk membuat dan memperkenalkan standar dan standardisasi internasional untuk berbagai tujuan.

ISO telah mengembangkan lebih dari 23,755 Standar Internasional dan semuanya tercantum di dalam katalog Standar ISO.

Isi dari standar ISO ini dilindungi oleh hak cipta dan sebagian besar harus melakukan proses pembelian untuk dapat mengakses keseluruhan isinya.

Namun ada sekitar 300 standar yang diproduksi oleh ISO dan IEC Joint Technical Committee (JTC1) telah dinyatakan bersifat bebas dan tersedia untuk umum.

Lebih jelas mengenai Standar ISO dan Badan ISO dapat dibaca pada artikel lain dari standarku.com berikut :

Standar Kerjasama

Didalam daftar standar ISO juga terdapat standar lain hasil kerjasama badan standardisasi lain dengan standar ISO seperti :

  • IEC (International Electrotechnical Commission)
  • IWA (International Workshop Agreement)

IEC adalah organisasi standardisasi internasional yang menyusun dan menerbitkan standar-standar internasional untuk seluruh bidang :

  • elektrik, elektronik dan teknologi yang terkait atau bidang teknologi elektro (electrotechnology).

Lebih jelas mengenai IEC dapat dibaca pada artikel lain dari standarku.com berikut :

IWA adalah dokumen ISO yang dihasilkan bukan melalui proses komite teknis ISO secara penuh, namun melalui workshop meeting.

Pelaku pasar dan pemangku kepentingan lainnya dapat berpartisipasi langsung dalam mengembangkan IWA dan tidak harus melalui delegasi nasional.

Ini adalah cara cepat untuk mendapatkan dokumen ISO yang diakui, prosesnya tidak boleh memakan waktu total lebih dari 12 bulan.

Prosesnya dirancang agar fleksibel dan sebagian besar diputuskan oleh organisasi yang mengajukan.

Daftar Standar ISO 14000-14499

Keseluruhan Daftar Standar ISO adalah dari ISO 1 hingga ISO 99999, namun terlalu panjang untuk ditampilkan semua pada halaman ini.

Untuk itu kami telah membaginya menjadi beberapa postingan, yang dimulai pada postingan sebelumnya berikut :

Selanjutnya pada postingan kali ini akan menampilkan Standar ISO seri ISO 14000 hingga ISO 14499.

Daftar Standar ISO 14000 – ISO 14099

ISO 14000 Environmental management systems [This is a set of standards, rather than a single standard.]

ISO 14001:2015 Environmental management systems – Requirements with guidance for use

ISO 14004:2016 Environmental management systems – General guidelines on implementation

ISO 14005:2010 Environmental management systems – Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation

ISO 14006:2011 Environmental management systems – Guidelines for incorporating ecodesign

ISO 14020:2000 Environmental labels and declarations – General principles

ISO 14031 Environmental management – Environmental performance evaluation – Guidelines

ISO 14046:2014 – Environmental management — Water footprint — Principles, requirements and guidelines

ISO 14050:2009 Environmental management – Vocabulary

ISO 14051 Environmental management – Material flow cost accounting – General framework

ISO 14064 Greenhouse gases

ISO/TR 14073:2017 Environmental management – Water footprint – Illustrative examples on how to apply ISO 14046

ISO 14084 Process diagrams for power plants

ISO 14084-1:2015 Part 1: Specification for diagrams

ISO 14084-2:2015 Part 2: Graphical symbols

Daftar Standar ISO 14100 – ISO 14199

ISO/TS 14101:2012 Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR method

ISO/IEC 14102:2008 Information technology – Guideline for the evaluation and selection of CASE tools

ISO/TR 14105:2011 Document management – Change management for successful electronic document management system (EDMS) implementation

ISO 14117:2012 Active implantable medical devices – Electromagnetic compatibility – EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices

ISO 14132 Optics and photonics – Vocabulary for telescopic systems

ISO 14132-1:2015 Part 1: General terms and alphabetical indexes of terms in ISO 14132

ISO 14132-2:2015 Part 2: Terms for binoculars, monoculars and spotting scopes

ISO 14132-3:2014 Part 3: Terms for telescopic sights

ISO 14132-4:2015 Part 4: Terms for astronomical telescopes

ISO 14132-5:2008 Part 5: Terms for night vision devices

ISO/IEC 14136:1995 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Identification supplementary services

ISO 14139:2000 Hydrometric determinations – Flow measurements in open channels using structures – Compound gauging structures

ISO/IEC 14143 Information technology – Software measurement – Functional size measurement

ISO/IEC 14143-1:2007 Part 1: Definition of concepts

ISO/IEC 14143-2:2011 Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1

ISO/IEC TR 14143-3:2003 Part 3: Verification of functional size measurement methods

ISO/IEC TR 14143-4:2002 Part 4: Reference model

ISO/IEC TR 14143-5:2004 Part 5: Determination of functional domains for use with functional size measurement

ISO/IEC 14143-6:2012 Part 6: Guide for use of ISO/IEC 14143 series and related International Standards

ISO 14145 Roller ball pens and refills

ISO 14145-2:1998 Part 2: Documentary use (DOC)

ISO 14155:2011 Clinical investigation of medical devices for human subjects – Good clinical practice

ISO 14163:1998 Acoustics – Guidelines for noise control by silencers

ISO 14164:1999 Stationary source emissions – Determination of the volume flowrate of gas streams in ducts – Automated method

ISO/IEC 14165 Information technology – Fibre Channel

ISO/IEC 14165-114:2005 Part 114: 100 MB/s Balanced copper physical interface (FC-100-DF-EL-S)

ISO/IEC 14165-115:2006 Part 115: Physical Interfaces (FC-PI)

ISO/IEC 14165-116:2005 Part 116: 10 Gigabit (10GFC)

ISO/IEC TR 14165-117:2007 Part 117: Methodologies for jitter and signal quality (MJSQ)

ISO/IEC 14165-122:2005 Part 122: Arbitrated Loop-2 (FC-AL-2)

ISO/IEC 14165-131:2000 Part 131: Switch Fabric Requirements (FC-SW)

ISO/IEC 14165-133:2010 Part 133: Switch Fabric-3 (FC-SW-3)

ISO/IEC 14165-141:2001 Part 141: Fabric Generic Requirements (FC-FG)

ISO/IEC 14165-211:1999 Part 211: Mapping to HIPPI-FP (FC-FP)

ISO/IEC 14165-222:2005 Part 222: Single-byte command code 2 mapping protocol (FC-SB-2)

ISO/IEC 14165-241:2005 Part 241: Backbone 2 (FC-BB-2)

ISO/IEC 14165-243:2012 Part 243: Backbone 3 (FC-BB-3)

ISO/IEC 14165-251:2008 Part 251: Framing and Signaling (FC-FS)

ISO/IEC TR 14165-312:2009 Part 312: Avionics environment upper layer protocol MIL-STD-1553B Notice 2 (FC-AE-1553)

ISO/IEC TR 14165-313:2013 Part 313: Avionics Environment—Anonymous Synchronous Messaging (FC-AE-ASM)

ISO/IEC TR 14165-314:2013 Part 314: Avionics Environment – Remote Direct Memory Access (FC-AE-RDMA)

ISO/IEC 14165-321:2009 Part 321: Audio-Video (FC-AV)

ISO/IEC 14165-331:2007 Part 331: Virtual Interface (FC-VI)

ISO/IEC TR 14165-372:2011 Part 372: Methodologies of interconnects-2 (FC-MI-2)

ISO/IEC 14165-414:2007 Part 414: Generic Services—4 (FC-GS-4)

ISO/IEC 14165-521:2009 Part 521: Fabric application interface standard (FAIS)

ISO/IEC 14169:1995 Information technology – 90 mm flexible disk cartridges – 21 MBytes formatted capacity – ISO Type 305

ISO 14189:2013 Water quality – Enumeration of Clostridium perfringens – Method using membrane filtration

ISO 14199:2015 Health informatics – Information models – Biomedical Research Integrated Domain Group (BRIDG) Model

Daftar Standar ISO 14200 – ISO 14299

ISO 14223 Radiofrequency identification of animals – Advanced transponders

ISO 14224 Petroleum, petrochemical and natural gas industries – Collection and exchange of reliability and maintenance data for equipment

ISO 14230 Road vehicles – Diagnostic systems – Keyword Protocol 2000

ISO 14242 Implants for surgery – Wear of total hip-joint prostheses

ISO 14242-1:2014 Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test

ISO 14242-2:2016 Part 2: Methods of measurement

ISO 14242-3:2009 Part 3: Loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test

ISO 14243 Implants for surgery – Wear of total knee-joint prostheses

ISO 14243-1:2009 Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test

ISO 14243-2:2016 Part 2: Methods of measurement

ISO 14243-3:2014 Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test

ISO/IEC 14251:1995 Information technology – Data interchange on 12,7 mm 36-track magnetic tape cartridges

ISO/IEC TR 14252:1996 Information technology – Guide to the POSIX Open System Environment (OSE) [Withdrawn without replacement]

ISO 14253 Geometrical product specifications (GPS) – Inspection by measurement of workpieces and measuring equipment

ISO 14253-1:2013 Part 1: Decision rules for proving conformity or nonconformity with specifications

ISO 14253-2:2011 Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification

ISO 14253-3:2011 Part 3: Guidelines for achieving agreements on measurement uncertainty statements

ISO/TS 14253-4:2010 Part 4: Background on functional limits and specification limits in decision rules

ISO 14253-5:2015 Part 5: Uncertainty in verification testing of indicating measuring instruments

ISO/TR 14253-6:2012 Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces

ISO/TS 14265:2011 Health Informatics – Classification of purposes for processing personal health information

ISO/TR 14283:2004 Implants for surgery – Fundamental principles

ISO 14289 Document management applications – Electronic document file format enhancement for accessibility

ISO 14289-1:2014 Part 1: Use of ISO 32000-1 (PDF/UA-1)

ISO/TR 14292:2012 Health informatics – Personal health records – Definition, scope and context

ISO 14296:2016 Intelligent transport systems – Extension of map database specifications for applications of cooperative ITS

Daftar Standar ISO 14300 – ISO 14399

ISO 14302:2002 Space systems – Electromagnetic compatibility requirements

ISO 14362 Textiles – Methods for determination of certain aromatic amines derived from azo colorants

ISO 14362-1:2017 Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres

ISO 14362-3:2017 Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene

ISO/IEC TR 14369:2018 Information technology – Programming languages, their environments and system software interfaces – Guidelines for the preparation of language-independent service specifications (LISS)

Daftar Standar ISO 14400 – ISO 14499

ISO 14405 Geometrical product specifications (GPS) – Dimensional tolerancing

ISO 14405-1:2016 Part 1: Linear sizes

ISO 14405-2:2011 Part 2: Dimensions other than linear sizes

ISO 14405-3:2016 Part 3: Angular sizes

ISO 14406:2010 Geometrical product specifications (GPS) – Extraction

ISO 14408:2016 Tracheal tubes designed for laser surgery – Requirements for marking and accompanying information

ISO 14416:2003 Information and documentation – Requirements for binding of books, periodicals, serials and other paper documents for archive and library use – Methods and materials

ISO/IEC 14417:1999 Information technology – Data recording format DD-1 for magnetic tape cassette conforming to IEC 1016

ISO/TS 14441:2013 Health informatics – Security and privacy requirements of EHR systems for use in conformity assessment

ISO/IEC 14443 Identification cards – Contactless integrated circuit cards – Proximity cards

ISO 14451 Pyrotechnic articles – Pyrotechnic articles for vehicles

ISO 14451-1:2013 Part 1: Terminology

ISO 14452:2012 Network services billing – Requirements

ISO 14461 Milk and milk products – Quality control in microbiological laboratories

ISO 14461-1:2005 Part 1: Analyst performance assessment for colony counts

ISO 14461-2:2005 Part 2: Determination of the reliability of colony counts of parallel plates and subsequent dilution steps

ISO/IEC 14462:2010 Information technology – Open-edi reference model

ISO/TR 14468:2010 Selected illustrations of attribute agreement analysis

ISO/IEC TR 14471:2007 Information technology – Software engineering – Guidelines for the adoption of CASE tools

ISO/IEC 14473:1999 Information technology – Office equipment – Minimum information to be specified for image scanners

ISO/IEC 14474:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Functional requirements for static circuit-mode inter-PINX connections

ISO/IEC TR 14475:2001 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Architecture and scenarios for Private Integrated Services Networking

ISO/IEC 14476 Information technology – Enhanced communications transport protocol

ISO/IEC 14476-1:2002 Specification of simplex multicast transport

ISO/IEC 14476-2:2003 Specification of QoS management for simplex multicast transport

ISO/IEC 14476-3:2008 Specification of duplex multicast transport

ISO/IEC 14476-4:2010 Specification of QoS management for duplex multicast transport

ISO/IEC 14476-5:2008 Specification of N-plex multicast transport

ISO/IEC 14476-6:2010 Specification of QoS management for n-plex multicast transport

ISO/IEC 14478 Information technology – Computer graphics and image processing – Presentation Environment for Multimedia Objects (PREMO)

ISO/IEC 14478-1:1998 Part 1: Fundamentals of PREMO

ISO/IEC 14478-2:1998 Part 2: Foundation Component

ISO/IEC 14478-3:1998 Part 3: Multimedia Systems Services

ISO/IEC 14478-4:1998 Part 4: Modelling, rendering and interaction component

ISO/IEC 14492:2001 Information technology – Lossy/lossless coding of bi-level images

ISO/IEC 14495 Information technology – Lossless and near-lossless compression of continuous-tone still images

ISO/IEC 14495-1:1999 Baseline

ISO/IEC 14495-2:2003 Extensions

ISO/IEC 14496 Information technology – Coding of audio-visual objects

Update Daftar

Untuk daftar lengkap dan terbaru dari semua standar ISO setiap saat, bisa dilihat pada katalog ISO di web resmi ISO international berikut :

https://www.iso.org/standards-catalogue/browse-by-ics.html

Demikian artikel dari standarku.com mengenai Daftar Standar ISO 14000-14499.

Mohon saran dari pembaca untuk kelengkapan isi artikel ini, silahkan saran tersebut dapat disampaikan melalui kolom komentar.

Baca artikel lain :

Sumber referensi :

Leave a Comment