Daftar Standar ASTM B

Daftar standar ASTM B adalah kumpulan judul dokumen standar yang diterbitkan oleh organisasi ASTM (American Standard Testing and Material) seri B.

ASTM atau American Standard Testing and Material adalah sebuah organisasi dunia yang mengembangkan standardisasi teknik untuk material, produk, sistem dan jasa.

Organisasi standardisasi internasional yang bersifat sukarela ini berpusat di kota Pennsylvania, Amerika Serikat.

Lebih jelas mengenai ASTM Internasional dapat dibaca pada artikel lain dari standarku.com berikut :

Artikel ini merupakan lanjutan dari 2 artikel sebelumnya sebagaimana link diatas, dengan fokus ke pengetahuan mengenai standar apa saja yang sudah dibuatnya.

Daftar standar ASTM Internasional terdiri dari kode A, B, C, … dan seterusnya hingga kode G.

Dikarenakan sangat banyak jumlah standar tersebut maka artikel menjadi terlalu panjang, oleh karena itu standarku.com memecah menjadi beberapa artikel yang dimulai dari artikel ini.

Format penulisan Standar ASTM Internasional

Tata cara penulisan standar ini biasanya diawali dengan huruf dan diikuti dengan nomor, yang ditetapkan secara berurutan.

Ada pilihan (opsional) untuk diikuti oleh tanda hubung dan dua digit terakhir yang berarti tahun di mana standar tersebut diadopsi.

Kode huruf awalan yang ditulis memiliki arti bahwa standar tersebut sesuai dengan subjek sebagaimana berikut :

  • A = Iron and Steel Materials (Bahan baku Besi dan Baja)
  • B = Nonferrous Metal Materials (Bahan baku Logam Nonferrous)
  • C = Ceramic, Concrete, and Masonry Materials (Bahan Keramik, Beton, dan Batu)
  • D = Miscellaneous Materials (Bahan Lain-lain)
  • E = Miscellaneous Subjects (Subyek Lain-Lain)
  • F = Materials for Specific Applications (Bahan baku untuk Aplikasi yang khusus)
  • G = Corrosion, Deterioration, and Degradation of Materials (Korosi, Deteriorasi, dan Degradasi dari bahan baku)

Kategori Standar ASTM Internasional

Berikut ini adalah daftar Standar ASTM Internasional seri B, yang mencakup standar yang masih aktif saat ini atau yang sudah ditarik.

Standar ASTM yang ditarik (withdrawn standard) adalah standar yang telah dihentikan (discontinued) oleh komite sponsornya.

Suatu standar ASTM dapat dilakukan penarikan,dengan atau tanpa adanya penggantian dengan standar atau aturan yang lebih baru.

Untuk memudahkan, terdapat kategori standar berdasarkan urutan kode nya seperti berikut :

A :

•             A1-A999

•             A1000-A1999

•             Withdrawn Standards

B :

•             B1-B999

•             B1000-B1999

C :

•             C1-C999

•             C1000-C1999

D

E

F

G :

•             G1-G999

•             Withdrawn Standard

Daftar Standar ASTM B

Standar Seri A ada di artikel  lain dari standarku.com berikut :

Berikut adalah Daftar standar ASTM Internasional selengkapnya untuk seri B, untuk selanjutnya yakni seri B hingga G kami pecah ke artikel lain standarku.com karena terlalu panjang.

Standar ASTM B1-B999

  • B1 – 13(2018) Specification for Hard-Drawn Copper Wire
  • B2 – 13(2018) Specification for Medium-Hard-Drawn Copper Wire
  • B3 – 13(2018) Specification for Soft or Annealed Copper Wire
  • B3-JPN – 13(2018) 標準仕様軟銅線または焼鈍銅線
  • B5 – 16 Specification for High Conductivity Tough-Pitch Copper Refinery Shapes
  • B6 – 18 Specification for Zinc
  • B8 – 11(2017) Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
  • B9 – 76(2017)e1 Specification for Bronze Trolley Wire
  • B16/B16M – 19 Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
  • B19 – 20 Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
  • B21/B21M – 20 Specification for Naval Brass Rod, Bar, and Shapes
  • B22/B22M – 17 Specification for Bronze Castings for Bridges and Turntables
  • B23 – 20 Specification for White Metal Bearing Alloys (Known Commercially as “Babbitt Metal”)
  • B26/B26M – 18e1 Specification for Aluminum-Alloy Sand Castings
  • B29 – 19 Specification for Refined Lead
  • B29-RU-RU – 19 Стандартные технические условия для очищенного свинца
  • B30 – 20 Specification for Copper Alloys in Ingot and Other Remelt Forms
  • B32 – 20 Specification for Solder Metal
  • B33 – 10(2020)e1 Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes
  • B36/B36M – 18 Specification for Brass Plate, Sheet, Strip, And Rolled Bar
  • B37 – 18 Specification for Aluminum for Use in Iron and Steel Manufacture
  • B39 – 79(2018) Specification for Nickel
  • B42 – 20 Specification for Seamless Copper Pipe, Standard Sizes
  • B43 – 20 Specification for Seamless Red Brass Pipe, Standard Sizes
  • B47 – 95a(2017) Specification for Copper Trolley Wire
  • B48 – 00(2016) Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
  • B49 – 20 Specification for Copper Rod for Electrical Purposes
  • B61 – 15 Specification for Steam or Valve Bronze Castings
  • B62 – 17 Specification for Composition Bronze or Ounce Metal Castings
  • B63 – 07(2018) Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
  • B66 – 15 Specification for Bronze Castings for Steam Locomotive Wearing Parts
  • B67 – 14 Specification for Car and Tender Journal Bearings, Lined
  • B68/B68M – 19 Specification for Seamless Copper Tube, Bright Annealed
  • B69 – 20 Specification for Rolled Zinc
  • B70 – 90(2019) Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating
  • B75/B75M – 20 Specification for Seamless Copper Tube
  • B76 – 90(2018) Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
  • B77 – 07(2018) Test Method for Thermoelectric Power of Electrical-Resistance Alloys
  • B78 – 90(2019) Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
  • B80 – 15 Specification for Magnesium-Alloy Sand Castings
  • B84 – 07(2019) Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
  • B85/B85M – 18e1 Specification for Aluminum-Alloy Die Castings
  • B86 – 18 Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
  • B88M – 20 Specification for Seamless Copper Water Tube (Metric)
  • B88 – 20 Specification for Seamless Copper Water Tube
  • B90/B90M – 15 Specification for Magnesium-Alloy Sheet and Plate
  • B91 – 17 Specification for Magnesium-Alloy Forgings
  • B92/B92M – 17 Specification for Unalloyed Magnesium Ingot and Stick For Remelting
  • B93/B93M – 15 Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
  • B94 – 18 Specification for Magnesium-Alloy Die Castings
  • B96/B96M – 20 Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
  • B98/B98M – 13(2019) Specification for Copper-Silicon Alloy Rod, Bar and Shapes
  • B99/B99M – 15 Specification for Copper-Silicon Alloy Wire for General Applications
  • B99/B99M – 15 Specification for Copper-Silicon Alloy Wire for General Applications
  • B100 – 20 Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use
  • B101 – 12(2019) Specification for Lead-Coated Copper Sheet and Strip for Building Construction
  • B103/B103M – 19 Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
  • B105 – 05(2020) Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors
  • B106 – 08(2019) Test Methods for Flexivity of Thermostat Metals
  • B107/B107M – 13 Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
  • B108/B108M – 19 Specification for Aluminum-Alloy Permanent Mold Castings
  • B111/B111M – 18a Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
  • B114 – 07(2018) Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
  • B115 – 10(2016) Specification for Electrolytic Copper Cathode
  • B115-RUS – 10(2016) Стандартная спецификация на катод из электролитической меди
  • B116 – 95(2017) Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolley Wire for Industrial Haulage
  • B117 – 19 Practice for Operating Salt Spray (Fog) Apparatus
  • B117-RU-RU – 19 Стандартное практическое руководство по эксплуатации оборудования для проведения испытаний с солевым распылением (в солевом тумане)
  • B121/B121M – 16 Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
  • B122/B122M – 20 Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
  • B124/B124M – 20 Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
  • B127 – 19 Specification for Nickel-Copper Alloy Plate, Sheet, and Strip
  • B129 – 17 Specification for Cartridge Brass Cartridge Case Cups
  • B130 – 19 Specification for Commercial Bronze Strip for Bullet Jackets
  • B131 – 17 Specification for Copper Alloy Bullet Jacket Cups
  • B134/B134M – 15 Specification for Brass Wire
  • B135/B135M – 17 Specification for Seamless Brass Tube
  • B136 – 84(2018) Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum
  • B137 – 95(2014) Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
  • B138/B138M – 11(2017) Specification for Manganese Bronze Rod, Bar, and Shapes
  • B139/B139M – 12(2017) Specification for Phosphor Bronze Rod, Bar, and Shapes
  • B140/B140M – 12(2017) Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
  • B148 – 18 Specification for Aluminum-Bronze Sand Castings
  • B150/B150M – 19 Specification for Aluminum Bronze Rod, Bar, and Shapes
  • B151/B151M – 20 Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
  • B152/B152M – 19 Specification for Copper Sheet, Strip, Plate, and Rolled Bar
  • B153 – 11(2017) Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
  • B154 – 16 Test Method for Mercurous Nitrate Test for Copper Alloys
  • B159/B159M – 17 Specification for Phosphor Bronze Wire
  • B160 – 05(2019) Specification for Nickel Rod and Bar
  • B160-RU-RU – 05(2019) Стандартные технические условия на стержни и прутки из никеля
  • B161 – 05(2019) Specification for Nickel Seamless Pipe and Tube
  • B162 – 99(2019) Specification for Nickel Plate, Sheet, and Strip
  • B163 – 19 Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
  • B164 – 03(2019) Specification for Nickel-Copper Alloy Rod, Bar, and Wire
  • B165 – 19 Specification for Nickel-Copper Alloy Seamless Pipe and Tube
  • B166 – 19 Specification for Nickel-Chromium-Aluminum Alloy, Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy, Nickel-Iron-Chromium-Tungsten Alloy, and Nickel-Chromium-Molybdenum-Copper Alloy Rod, Bar, and Wire
  • B167 – 18 Specification for Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235) Seamless Pipe and Tube
  • B167-RUS – 18 Стандартные технические условия на никель-хром-алюминиевые сплавы (UNS N06699), никель-хром-железные сплавы (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045 и N06696), никель-хром-кобальт-молибденовый сплав (UNS N06617), никель-железо-хром-вольфрамовый сплав (UNS N06674) и никель-хром-молибден-медный сплав (UNS N06235) бесшовных труб и трубок никель-хром-кобальт-молибденовый сплав (UNS N06617), никель-железо-хром-вольфрамовый сплав (UNS N06674) и никель-хром-молибден-медный сплав (UNS N06235) в холоднодеформированных
  • B168 – 19 Specification for Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235) Plate, Sheet, and Strip
  • B169/B169M – 20 Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
  • B170 – 99(2020) Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes
  • B171/B171M – 18 Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
  • B172 – 17 Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
  • B173 – 17 Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
  • B174 – 17 Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
  • B176 – 18 Specification for Copper-Alloy Die Castings
  • B177/B177M – 11(2017) Guide for Engineering Chromium Electroplating
  • B179 – 18 Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
  • B183 – 18 Practice for Preparation of Low-Carbon Steel for Electroplating
  • B187/B187M – 20 Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes
  • B188 – 15e1 Specification for Seamless Copper Bus Pipe and Tube
  • B189 – 05(2015) Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes
  • B193 – 20 Test Method for Resistivity of Electrical Conductor Materials
  • B194 – 15 Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
  • B194-RU-RU – 15 Стандартные технические условия на плиты, листы, штрипсы и катаные прутки из медно-бериллиевого сплава
  • B196/B196M – 18 Specification for Copper-Beryllium Alloy Rod and Bar
  • B196/B196M-RU-RU – 18 Стандартные технические условия на стержни и прутки из меднобериллиевого сплава
  • B197/B197M – 20 Specification for Copper-Beryllium Alloy Wire
  • B199 – 17 Specification for Magnesium-Alloy Permanent Mold Castings
  • B200 – 85(2015) Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
  • B201 – 80(2019) Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces
  • B206/B206M – 12(2017) Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire
  • B208 – 14 Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings
  • B209 – 14 Specification for Aluminum and Aluminum-Alloy Sheet and Plate
  • B209M – 14 Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)
  • B210/B210M – 19a Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
  • B211/B211M – 19 Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
  • B212 – 17 Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
  • B212-RU-RU – 17 Стандартный метод испытания для определения объемной плотности свободнотекучих металлопорошков с использованием прибора Холла
  • B213 – 20 Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
  • B214 – 16 Test Method for Sieve Analysis of Metal Powders
  • B214-RU-RU – 16 Стандартный метод испытания для проведения ситового анализа металлопорошков
  • B215 – 20 Practices for Sampling Metal Powders
  • B216 – 16 Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes
  • B221M – 13 Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)
  • B221 – 20 Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
  • B223 – 08(2018) Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
  • B224 – 16 Classification of Coppers
  • B226 – 11(2016) Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
  • B227 – 15(2019) Specification for Hard-Drawn Copper-Clad Steel Wire
  • B228 – 11a(2016) Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
  • B229 – 12(2017) Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
  • B230/B230M – 07(2016) Specification for Aluminum 1350–H19 Wire for Electrical Purposes
  • B231/B231M – 16 Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
  • B232/B232M – 17 Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
  • B233 – 97(2016) Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
  • B234 – 17 Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers
  • B234M – 17 Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers (Metric)
  • B236 – 07(2015) Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
  • B236M – 07(2015) Specification for Aluminum Bars for Electrical Purposes (Bus Bars) (Metric)
  • B237 – 20 Specification for Refined Antimony
  • B240 – 17 Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
  • B241/B241M – 16 Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
  • B242 – 99(2020) Guide for Preparation of High-Carbon Steel for Electroplating
  • B243 – 20 Terminology of Powder Metallurgy
  • B244 – 09(2014) Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
  • B246 – 15 Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes
  • B247 – 20 Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
  • B247M – 20 Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric)
  • B248 – 17 Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
  • B248M – 17 Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)
  • B248-RU-RU – 17 Технические условия на общие требования для плит, листов, штрипсов и катаных прутков из меди и медных сплавов, полученных обработкой металла давлением
  • B249/B249M – 20 Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
  • B250/B250M – 19 Specification for General Requirements for Wrought Copper Alloy Wire
  • B251/B251M – 17 Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
  • B252 – 92(2020) Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
  • B253 – 11(2017) Guide for Preparation of Aluminum Alloys for Electroplating
  • B254 – 92(2020)e1 Practice for Preparation of and Electroplating on Stainless Steel
  • B258 – 18 Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
  • B263/B263M – 14(2020) Test Method for Determination of Cross-Sectional Area of Stranded Conductors
  • B265 – 20a Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
  • B267 – 07(2018) Specification for Wire for Use In Wire-Wound Resistors
  • B271/B271M – 18 Specification for Copper-Base Alloy Centrifugal Castings
  • B272 – 12(2019) Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
  • B276 – 05(2015) Test Method for Apparent Porosity in Cemented Carbides
  • B277 – 18 Test Method for Hardness of Electrical Contact Materials
  • B279 – 13(2019) Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
  • B280 – 20 Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
  • B281 – 88(2019)e1 Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
  • B283/B283M – 20 Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
  • B286 – 20 Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
  • B294 – 17 Test Method for Hardness Testing of Cemented Carbides
  • B296 – 20 Practice for Temper Designations of Magnesium Alloys, Cast and Wrought
  • B298 – 12(2017) Specification for Silver-Coated Soft or Annealed Copper Wire
  • B299/B299M – 18 Specification for Titanium Sponge
  • B301/B301M – 13(2020) Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes
  • B302 – 17 Specification for Threadless Copper Pipe, Standard Sizes
  • B306 – 20 Specification for Copper Drainage Tube (DWV)
  • B308/B308M – 20 Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
  • B311 – 17 Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
  • B312 – 20 Test Method for Green Strength of Specimens Compacted from Metal Powders
  • B315 – 19 Specification for Seamless Copper Alloy Pipe and Tube
  • B316/B316M – 20 Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
  • B317/B317M – 07(2015)e1 Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
  • B319 – 91(2020) Guide for Preparation of Lead and Lead Alloys for Electroplating
  • B320 – 60(2019) Practice for Preparation of Iron Castings for Electroplating
  • B322 – 99(2020)e1 Guide for Cleaning Metals Prior to Electroplating
  • B324 – 01(2016) Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
  • B327 – 16 Specification for Master Alloys Used in Making Zinc Die Casting Alloys
  • B329 – 20 Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
  • B330 – 20 Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability
  • B331 – 20 Test Method for Compressibility of Metal Powders in Uniaxial Compaction
  • B333 – 03(2018) Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
  • B335 – 03(2018) Specification for Nickel-Molybdenum Alloy Rod
  • B338 – 17e1 Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
  • B338-RU-RU – 17e1 Технические условия на бесшовные и сварные трубы из титана и титановых сплавов, предназначенные для конденсаторов и теплообменников
  • B339 – 19 Specification for Pig Tin
  • B343 – 92a(2020) Practice for Preparation of Nickel for Electroplating with Nickel
  • B344 – 20 Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements
  • B348/B348M – 19 Specification for Titanium and Titanium Alloy Bars and Billets
  • B348/B348M-RU-RU – 19 Стандартные технические условия на прутки и болванки из титана и титановых сплавов
  • B349/B349M – 16 Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application
  • B350/B350M – 11(2016)e1 Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
  • B351/B351M – 13(2018) Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
  • B352/B352M – 17 Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
  • B353 – 12(2017) Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)
  • B354 – 19 Terminology Relating to Uninsulated Metallic Electrical Conductors
  • B355 – 11(2016) Specification for Nickel-Coated Soft or Annealed Copper Wire
  • B359/B359M – 18 Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
  • B360 – 20 Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
  • B361 – 16 Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
  • B362 – 91(2020) Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
  • B363 – 19 Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
  • B364 – 18 Specification for Tantalum and Tantalum Alloy Ingots
  • B365 – 12(2019) Specification for Tantalum and Tantalum Alloy Rod and Wire
  • B366/B366M – 20 Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
  • B367 – 13(2017) Specification for Titanium and Titanium Alloy Castings
  • B367-RU-RU – 13(2017)
  • B368 – 09(2014) Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
  • B369/B369M – 20 Specification for Copper-Nickel Alloy Castings
  • B370 – 12(2019) Specification for Copper Sheet and Strip for Building Construction
  • B371/B371M – 19 Specification for Copper-Zinc-Silicon Alloy Rod
  • B372 – 17 Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
  • B373 – 19 Specification for Aluminum Foil for Capacitors
  • B374 – 06(2019) Terminology Relating to Electroplating
  • B379 – 20 Specification for Phosphorized Coppers—Refinery Shapes
  • B380 – 97(2018) Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
  • B381 – 13(2019) Specification for Titanium and Titanium Alloy Forgings
  • B381-RU-RU – 13(2019) Стандартные технические условия на поковки из титана и титанового сплава
  • B386/B386M – 19e1 Specification for Molybdenum and Molybdenum Alloy Plate,Sheet, Strip, Foil, and Ribbon
  • B387 – 18 Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
  • B388 – 06(2018) Specification for Thermostat Metal Sheet and Strip
  • B389 – 81(2020) Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
  • B391 – 18 Specification for Niobium and Niobium Alloy Ingots
  • B392 – 18 Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
  • B393 – 18 Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
  • B394 – 18 Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
  • B395/B395M – 18 Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
  • B398/B398M – 15 Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes
  • B399/B399M – 04(2015) Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
  • B400/B400M – 19 Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors
  • B401 – 12(2016) Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)
  • B403 – 20 Specification for Magnesium-Alloy Investment Castings
  • B406 – 96(2015) Test Method for Transverse Rupture Strength of Cemented Carbides
  • B407 – 08a(2019) Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
  • B408 – 06(2016) Specification for Nickel-Iron-Chromium Alloy Rod and Bar
  • B409 – 06(2016) Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
  • B411/B411M – 14(2019) Specification for Copper-Nickel-Silicon Alloy Rod and Bar
  • B413 – 97a(2017) Specification for Refined Silver
  • B415 – 16 Specification for Hard-Drawn Aluminum-Clad Steel Wire
  • B416 – 98(2018) Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
  • B417 – 18 Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
  • B418 – 16a Specification for Cast and Wrought Galvanic Zinc Anodes
  • B422/B422M – 17 Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip
  • B423 – 11(2016) Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845) Seamless Pipe and Tube
  • B423-RU-RU – 11(2016) Стандартные технические условия на бесшовные трубы и трубки из никель-железо-хром-молибден-медного сплава (UNS N08825, N08221 и N06845)
  • B424 – 19e1 Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloys Plate, Sheet, and Strip
  • B425 – 19 Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloys Rod and Bar
  • B427 – 09(2015) Specification for Gear Bronze Alloy Castings
  • B428 – 09(2018) Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
  • B429/B429M – 20 Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
  • B432 – 19 Specification for Copper and Copper Alloy Clad Steel Plate
  • B434 – 06(2016) Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242) Plate, Sheet, and Strip
  • B435 – 06(2016) Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip
  • B438 – 17 Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
  • B439 – 18 Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
  • B440 – 12(2017) Specification for Cadmium
  • B441 – 16 Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)
  • B443 – 19 Specification for Nickel-Chromium-Molybdenum-Columbium Alloy and Nickel-Chromium-Molybdenum-Silicon Alloy Plate, Sheet, and Strip
  • B444 – 18 Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
  • B444-RU-RU – 18 Стандартные технические условия на трубы из никель-хроммолибден-ниобиевых сплавов (UNS N06625 и UNS N06852) и никельхром-молибден-кремниевого сплава (UNS N06219)
  • B446 – 19 Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar
  • B446-RU-RU – 19 Стандартные технические условия для стержней и прутков из сплава никель-хром-молибден-ниобий (UNS N06625), сплава никель-хром-молибден-кремний (UNS N06219) и сплава никельхром-молибден-вольфрам (UNS N06650)
  • B447 – 12a(2021) Specification for Welded Copper Tube
  • B449 – 93(2015) Specification for Chromates on Aluminum
  • B452 – 09(2015) Specification for Copper-Clad Steel Wire for Electronic Application
  • B453/B453M – 19 Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
  • B455/B455M – 20 Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
  • B456 – 17 Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium
  • B457 – 67(2018) Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
  • B462 – 18 Specification for Forged or Rolled Nickel Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature Service
  • B462-RU-RU – 18 Стандартные технические условия на кованые или катаные фланцы труб, кованые фитинги и арматуру и детали из никелевых сплавов для эксплуатации в коррозионной среде при высокой температуре
  • B463 – 10(2016) Specification for UNS N08020 Alloy Plate, Sheet, and Strip
  • B464/B464M – 15(2020) Specification for Welded UNS N08020 Alloy Pipe
  • B465 – 20 Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
  • B466/B466M – 18 Specification for Seamless Copper-Nickel Pipe and Tube
  • B467 – 14 Specification for Welded Copper-Nickel Pipe
  • B468 – 10(2020) Specification for Welded UNS N08020 Alloy Tubes
  • B470 – 02(2017) Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
  • B472 – 18 Specification for Nickel Alloy Billets and Bars for Reforging
  • B472-RU-RU – 18 Стандартные технические условия на цилиндрические заготовки и прутки из никелевого сплава для перековки
  • B473 – 07(2018) Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
  • B474/B474M – 19 Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe
  • B475 – 07(2018) Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire
  • B476 – 01(2017) Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials
  • B477 – 97(2017) Specification for Gold-Silver-Nickel Electrical Contact Alloy
  • B478 – 85(2016) Test Method for Cross Curvature of Thermostat Metals
  • B479 – 19 Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications
  • B480 – 88(2017) Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating
  • B481 – 68(2019) Practice for Preparation of Titanium and Titanium Alloys for Electroplating
  • B482 – 85(2019) Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating
  • B483/B483M – 20 Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications
  • B487 – 20 Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section
  • B488 – 18 Specification for Electrodeposited Coatings of Gold for Engineering Uses
  • B489 – 85(2018) Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
  • B490 – 09(2014) Practice for Micrometer Bend Test for Ductility of Electrodeposits
  • B491/B491M – 15 Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
  • B493/B493M – 14(2019) Specification for Zirconium and Zirconium Alloy Forgings
  • B494/B494M – 08(2020) Specification for Primary Zirconium
  • B495 – 10(2017) Specification for Zirconium and Zirconium Alloy Ingots
  • B496 – 16 Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
  • B498/B498M – 19 Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors
  • B499 – 09(2014) Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
  • B500/B500M – 12(2018) Specification for Metallic Coated or Aluminum Clad Stranded Steel Core for Use in Overhead Electrical Conductors
  • B501 – 10(2019) Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application
  • B502/B502M – 19 Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum Conductors
  • B504 – 90(2017) Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
  • B505/B505M – 18 Specification for Copper Alloy Continuous Castings
  • B506 – 16 Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction
  • B507 – 14 Practice for Design of Articles to Be Electroplated on Racks
  • B508 – 16 Specification for Copper Alloy Strip for Flexible Metal Hose
  • B511/B511M – 16 Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
  • B512 – 20 Specification for Nickel-Chromium-Silicon Alloy Billets and Bars
  • B514 – 05(2019) Specification for Welded Nickel-Iron-Chromium Alloy Pipe
  • B515 – 20 Specification for Welded Nickel-Iron-Chromium Alloy Tubes
  • B516 – 18 Specification for Welded Nickel-Chromium-Aluminum Alloy (UNS N06699) and Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06601, UNS N06603, UNS N06025, UNS N06045, UNS N06690, and UNS N06693) Tubes
  • B517 – 19 Specification for Welded Nickel-Chromium-Iron-Alloy Pipe
  • B520 – 12(2017) Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application
  • B521 – 19 Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
  • B522 – 01(2017) Specification for Gold-Silver-Platinum Electrical Contact Alloy
  • B523/B523M – 18 Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
  • B524/B524M – 18 Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)
  • B527 – 20 Test Method for Tap Density of Metal Powders and Compounds
  • B528 – 16(2020)e1 Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
  • B530 – 09(2014) Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
  • B532 – 85(2014) Specification for Appearance of Electroplated Plastic Surfaces
  • B533 – 85(2019) Test Method for Peel Strength of Metal Electroplated Plastics
  • B534 – 20 Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
  • B535 – 06(2017) Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube
  • B536 – 19 Specification for Nickel-Iron-Chromium-Silicon Alloys Plate, Sheet, and Strip
  • B537 – 70(2019) Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure
  • B539 – 20 Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
  • B540 – 97(2017) Specification for Palladium Electrical Contact Alloy
  • B541 – 01(2018) Specification for Gold Electrical Contact Alloy
  • B542 – 13(2019) Terminology Relating to Electrical Contacts and Their Use
  • B543/B543M – 18 Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
  • B545 – 13 Specification for Electrodeposited Coatings of Tin
  • B546 – 19 Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy, Ni-Fe-Cr-Si Alloy, Ni-Cr-Fe-Al Alloy, Ni-Cr-Fe Alloy, and Ni-Cr-Fe-Si Alloy Pipe
  • B548 – 03(2017) Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
  • B549 – 18 Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced for Use in Overhead Electrical Conductors
  • B550/B550M – 07(2019) Specification for Zirconium and Zirconium Alloy Bar and Wire
  • B551/B551M – 12(2017) Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
  • B552 – 19 Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants
  • B555 – 86(2018) Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test
  • B556 – 90(2018) Guide for Measurement of Thin Chromium Coatings by Spot Test
  • B557 – 15 Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
  • B557M – 15 Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
  • B557-RUS – 15 Стандартные методы испытаний на растяжение кованых и литых изделий из алюминиевого и магниевого сплавов
  • B558 – 79(2019) Practice for Preparation of Nickel Alloys for Electroplating
  • B559 – 12(2017) Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application
  • B560 – 20 Specification for Modern Pewter Alloys
  • B561 – 94(2018) Specification for Refined  Platinum
  • B562 – 95(2017) Specification for Refined Gold
  • B563 – 01(2017) Specification for Palladium-Silver-Copper Electrical Contact Alloy
  • B564 – 19 Specification for Nickel Alloy Forgings
  • B564-RU-RU – 19 Стандартные технические условия на поковки из никелевых сплавов
  • B565 – 20 Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
  • B566 – 04a(2016) Specification for Copper-Clad Aluminum Wire
  • B567 – 98(2014) Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
  • B568 – 98(2014) Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
  • B569 – 19 Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing
  • B570 – 16 Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions
  • B571 – 18 Practice for Qualitative Adhesion Testing of Metallic Coatings
  • B572 – 06(2016) Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod
  • B573 – 06(2016) Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242) Rod
  • B574 – 18 Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
  • B574-RU-RU – 18 Стандартные технические условия на стержни из низкоуглеродистых никель-хром-молибденовых, никель-молибден-хромистых, никельмолибден-хром-танталовых, никель-хром-молибден-медных и никельхром-молибден-вольфрамовых сплавов
  • B575 – 17 Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium Alloy Plate, Sheet, and Strip
  • B575-RU-RU – 17 Стандартные технические условия на плиты, листы и штрипсы из низкоуглеродистых никель-хром-молибденовых, никель-хром-молибден-медных, никель-молибден-хром-танталовых, никель-хроммолибден-вольфрамовых и никель-молибден-хромистых сплавов
  • B576 – 94(2016) Guide for Arc Erosion Testing of Electrical Contact Materials
  • B577 – 19 Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
  • B578 – 87(2015) Test Method for Microhardness of Electroplated Coatings
  • B579 – 73(2015) Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
  • B580 – 79(2019) Specification for Anodic Oxide Coatings on Aluminum
  • B581 – 17 Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
  • B582 – 07(2018) Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
  • B584 – 14 Specification for Copper Alloy Sand Castings for General Applications
  • B587 – 19 Specification for Welded Brass Tube
  • B589 – 94(2017) Specification for Refined Palladium
  • B591 – 20a Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
  • B592 – 20 Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
  • B593 – 21 Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
  • B594 – 19 Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products
  • B595 – 11(2016) Specification for Sintered Aluminum Structural Parts
  • B596 – 89(2017) Specification for Gold-Copper Alloy Electrical Contact Material
  • B599 – 20 Specification for Nickel-Iron-Chromium-Molybdenum-Niobium Stabilized Alloy Plate, Sheet, and Strip
  • B600 – 11(2017) Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
  • B601 – 18a Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast
  • B602 – 88(2016) Test Method for Attribute Sampling of Metallic and Inorganic Coatings
  • B603 – 07(2018) Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
  • B604 – 91(2019) Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
  • B605 – 95a(2015) Specification for Electrodeposited Coatings of Tin-Nickel Alloy
  • B606/B606M – 19 Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
  • B607 – 15 Specification for Autocatalytic Nickel Boron Coatings for Engineering Use
  • B608 – 18 Specification for Welded Copper-Alloy Pipe
  • B609/B609M – 12(2016) Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
  • B610 – 19 Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders Intended for Die Compaction
  • B611 – 13(2018) Test Method for Determining the High Stress Abrasion Resistance of Hard Materials
  • B613 – 17 Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
  • B614 – 16 Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
  • B615 – 79(2017) Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
  • B616 – 96(2018) Specification for Refined Rhodium
  • B617 – 98(2016) Specification for Coin Silver Electrical Contact Alloy
  • B618/B618M – 18e1 Specification for Aluminum-Alloy Investment Castings
  • B619/B619M – 19 Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
  • B620 – 03(2018) Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip
  • B621 – 02(2016) Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
  • B622 – 17b Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
  • B622-RU-RU – 17b Стандартные технические условия на бесшовные трубы большого и малого диаметра из никеля и никель-кобальтового сплава
  • B624 – 07(2017) Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
  • B625 – 17 Specification for UNS N08925, UNS N08031, UNS N08034, UNS N08932, UNS N08926, UNS N08354, UNS N08830, and UNS R20033 Plate, Sheet, and Strip
  • B626 – 19 Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
  • B628 – 98(2016) Specification for Silver-Copper Eutectic Electrical Contact Alloy
  • B629 – 77(2019) Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating
  • B630 – 88(2017) Practice for Preparation of Chromium for Electroplating with Chromium
  • B631 – 93(2016) Specification for Silver-Tungsten Electrical Contact Materials
  • B632/B632M – 18 Specification for Aluminum-Alloy Rolled Tread Plate
  • B633 – 19 Specification for Electrodeposited Coatings of Zinc on Iron and Steel
  • B634 – 14a Specification for Electrodeposited Coatings of Rhodium for Engineering Use
  • B635 – 00(2015) Specification for Coatings of Cadmium-Tin Mechanically Deposited
  • B636/B636M – 15 Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
  • B637 – 18 Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service
  • B637-RU-RU – 18 Стандартные технические условия на прутки, поковки и кованые заготовки из холоднодеформированных дисперсионно-упрочненных и никелевых сплавов для эксплуатации в условиях средней или высокой температуры
  • B639 – 02(2018) Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
  • B640 – 12a(2021) Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service
  • B643 – 18 Specification for Copper-Beryllium Alloy Seamless Tube
  • B644 – 11(2017) Specification for Copper Alloy Addition Agents
  • B645 – 10(2015) Practice for Linear-Elastic Plane–Strain Fracture Toughness Testing of Aluminum Alloys
  • B646 – 19 Practice for Fracture Toughness Testing of Aluminum Alloys
  • B647 – 10(2016) Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
  • B648 – 10(2015)e1 Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
  • B649 – 17 Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08034, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire
  • B650 – 95(2018) Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
  • B651 – 83(2019) Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
  • B652/B652M – 10(2018) Specification for Niobium-Hafnium Alloy Ingots
  • B653/B653M – 11(2020) Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
  • B654/B654M – 10(2018) Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
  • B655/B655M – 10(2018) Specification for Niobium-Hafnium Alloy Bar and Wire
  • B657 – 18 Guide for Metallographic Identification of Microstructure in Cemented Carbides
  • B658/B658M – 11(2020) Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
  • B659 – 90(2014) Guide for Measuring Thickness of Metallic and Inorganic Coatings
  • B660 – 15 Practices for Packaging/Packing of Aluminum and Magnesium Products
  • B661 – 12(2020) Practice for Heat Treatment of Magnesium Alloys
  • B662/B662M – 20 Specification for Silver-Molybdenum Electrical Contact Material
  • B663/B663M – 20 Specification for Silver-Tungsten Carbide Electrical Contact Material
  • B664 – 18 Specification for 80 % Silver-20 % Graphite Sliding Contact Material
  • B665 – 19 Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
  • B666/B666M – 20 Practice for Identification Marking of Aluminum and Magnesium Products
  • B667 – 97(2019) Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
  • B668 – 14(2019) Specification for UNS N08028 and N08029 Seamless Pipe and Tube
  • B670 – 07(2018) Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service
  • B671 – 81(2017) Specification for Refined Iridium
  • B672 – 02(2018) Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
  • B673 – 05(2016) Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe
  • B674 – 05(2016) Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube
  • B675 – 02(2018) Specification for UNS N08367 Welded Pipe
  • B675-RUS – 02(2018) Стандартная спецификация для сварных труб из сплава UNS N08367
  • B676 – 19 Specification for UNS N08367 Welded Tube
  • B677 – 05(2016) Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube
  • B678 – 86(2017) Test Method for Solderability of Metallic-Coated Products
  • B679 – 98(2015) Specification for Electrodeposited Coatings of Palladium for Engineering Use
  • B680 – 80(2019) Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
  • B682 – 01(2016) Specification for Standard Metric Sizes of Electrical Conductors
  • B683 – 20 Specification for Pure Palladium Electrical Contact Material
  • B684/B684M – 16 Specification for Platinum-Iridium Electrical Contact Materials
  • B685 – 20 Specification for Palladium-Copper Electrical Contact Material
  • B686/B686M – 18 Specification for Aluminum Alloy Castings, High-Strength
  • B687 – 99(2016) Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
  • B688 – 18 Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08367) Plate, Sheet, and Strip
  • B689 – 97(2018)e1 Specification for Electroplated Engineering Nickel Coatings
  • B690 – 18 Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08367) Seamless Pipe and Tube
  • B691 – 18 Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08367) Rod, Bar, and Wire
  • B692 – 18 Specification for 75 % Silver-25 % Graphite Sliding Contact Material
  • B693 – 17 Specification for Silver-Nickel Electrical Contact Materials
  • B694 – 19 Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
  • B695 – 04(2016) Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
  • B696 – 00(2015) Specification for Coatings of Cadmium Mechanically Deposited
  • B697 – 88(2016) Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
  • B698/B698M – 10(2021) Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube
  • B699 – 86(2015) Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
  • B700 – 20 Specification for Electrodeposited Coatings of Silver for Engineering Use
  • B701/B701M – 13(2018) Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)
  • B702 – 93(2019) Specification for Copper-Tungsten Electrical Contact Material
  • B703 – 17 Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
  • B704 – 19 Specification for Welded Nickel Alloy Tubes
  • B704-RU-RU – 19 Стандартные технические условия на сварные трубы из никелевых сплавов
  • B705 – 17 Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe
  • B705-RU-RU – 17 Стандартные технические условия на сварные трубы из никелевых сплавов (UNS N06625, N06219 и N08825)
  • B706 – 18 Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube
  • B708 – 12(2019) Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
  • B709 – 17 Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028) Plate, Sheet, and Strip
  • B710 – 20a Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
  • B711 – 18 Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)
  • B717 – 96(2018) Specification for Refined Ruthenium
  • B718 – 00(2016) Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip
  • B719 – 20 Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Bar
  • B722 – 06(2016) Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube
  • B723 – 20 Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Welded Pipe
  • B725 – 18 Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe
  • B726 – 02(2016) Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube
  • B727 – 04(2020) Practice for Preparation of Plastics Materials for Electroplating
  • B729 – 20 Specification for Seamless Nickel-Iron-Chromium-Molybdenum-Copper Nickel Alloy Pipe and Tube
  • B730 – 08(2018) Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube
  • B733 – 15 Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
  • B733-RU-RU – 15 Стандартные технические условия на автокаталитические (химические) никель-фосфорные покрытия на металле
  • B734 – 97(2018) Specification for Electrodeposited Copper for Engineering Uses
  • B735 – 16 Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
  • B737 – 10(2015) Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire
  • B738 – 13(2018) Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
  • B739 – 03(2018) Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube
  • B740 – 09(2015) Specification for Copper-Nickel-Tin Spinodal Alloy Strip
  • B743 – 12(2020) Specification for Seamless Copper Tube in Coils
  • B744/B744M – 15(2020) Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
  • B745/B745M – 15 Specification for Corrugated Aluminum Pipe for Sewers and Drains
  • B746/B746M – 16 Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
  • B747 – 20 Specification for Copper-Zirconium Alloy Sheet and Strip
  • B748 – 90(2016) Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
  • B749 – 20 Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
  • B750 – 16 Specification for GALFAN
  • B751 – 20 Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
  • B752/B752M – 18 Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application
  • B753 – 07(2018) Specification for Thermostat Component Alloys
  • B754 – 17 Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip
  • B755 – 00(2016) Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip
  • B756 – 00(2016) Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy(UNS N06110) Rod and Bar
  • B757 – 00(2016) Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe
  • B758 – 00(2016) Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube
  • B759 – 00(2016) Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube
  • B760 – 07(2019) Specification for Tungsten Plate, Sheet, and Foil
  • B761 – 17 Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
  • B761-RU-RU – 17 Стандартный метод испытания гранулометрического состава металлических порошков и связанных с ними соединений с помощью контрольного рентгеновского исследования гравитационного осаждения
  • B762 – 90(2016) Test Method of Variables Sampling of Metallic and Inorganic Coatings
  • B763/B763M – 15 Specification for Copper Alloy Sand Castings for Valve Applications
  • B764 – 04(2014) Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
  • B765 – 03(2018) Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
  • B766 – 86(2015) Specification for Electrodeposited Coatings of Cadmium
  • B767 – 88(2016) Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
  • B768 – 11(2016) Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet
  • B769 – 11(2016) Test Method for Shear Testing of Aluminum Alloys
  • B770 – 15 Specification for Copper-Beryllium Alloy Sand Castings for General Applications
  • B771 – 11(2017) Test Method for Short Rod Fracture Toughness of Cemented Carbides
  • B772 – 97(2012) Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)
  • B774 – 00(2014) Specification for Low Melting Point Alloys
  • B775/B775M – 19 Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
  • B776 – 12(2019) Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
  • B777 – 15(2020) Specification for Tungsten Base, High-Density Metal
  • B778 – 19 Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)
  • B779 – 18 Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)
  • B780 – 16 Specification for 75 % Silver, 24.5 % Copper, 0.5 % Nickel Electrical Contact Alloy
  • B781 – 93a(2012) Guide for Silver-Cadmium Oxide Contact Material
  • B783 – 19 Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts
  • B784 – 01(2017)e1 Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
  • B786/B786M – 08(2018) Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation
  • B787/B787M – 04(2020) Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation
  • B788/B788M – 09(2020) Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
  • B789/B789M – 16 Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
  • B790/B790M – 16 Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
  • B792 – 16 Specification for Zinc Alloys in Ingot Form for Slush Casting
  • B793 – 16 Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
  • B794 – 97(2020) Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
  • B795 – 20 Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials
  • B796 – 20 Test Method for Nonmetallic Inclusion Content of Ferrous Powders Intended for Powder Forging (PF) Applications
  • B797 – 20 Test Method for Surface Finger-Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (PF) Steel Parts
  • B798 – 95(2020) Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
  • B799 – 95(2020) Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
  • B800 – 05(2015) Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers
  • B801 – 18 Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
  • B802/B802M – 19 Specification for Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
  • B803/B803M – 19 Specification for High-Strength Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
  • B804 – 02(2018) Specification for UNS N08367 and UNS N08926 Welded Pipe
  • B805 – 06(2017)e1 Specification for Precipitation Hardening Nickel Alloys Bar and Wire
  • B805-RU-RU – 06(2017)e1 Стандартные технические условия на прутки и проволоку из никелевых сплавов дисперсионного твердения
  • B806 – 14 Specification for Copper Alloy Permanent Mold Castings for General Applications
  • B807/B807M – 20 Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
  • B808 – 10(2020) Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
  • B809 – 95(2018) Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”)
  • B810 – 01a(2017) Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
  • B811 – 13(2017) Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
  • B812 – 18 Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
  • B813 – 16 Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
  • B814 – 06(2020) Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy(UNS N06920) Plate, Sheet, and Strip
  • B815 – 02(2016) Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod
  • B816 – 00(2015) Specification for Coatings of Cadmium-Zinc Mechanically Deposited
  • B818 – 03(2018) Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy(UNS R31233) Plate, Sheet and Strip
  • B819 – 19 Specification for Seamless Copper Tube for Medical Gas Systems
  • B820 – 18 Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
  • B821 – 10(2016) Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis
  • B822 – 20 Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
  • B823 – 20 Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts
  • B824 – 17 Specification for General Requirements for Copper Alloy Castings
  • B825 – 19 Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
  • B826 – 09(2020) Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
  • B827 – 05(2020) Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
  • B828 – 16 Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
  • B829 – 19a Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
  • B829-RU-RU – 19a Стандартные технические условия на общие требования для бесшовных труб и трубок из никеля и никелевых сплавов
  • B830 – 18 Specification for Uniform Test Methods and Frequency
  • B831 – 19 Test Method for Shear Testing of Thin Aluminum Alloy Products
  • B832 – 93(2018) Guide for Electroforming with Nickel and Copper
  • B833 – 20 Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel
  • B834 – 17 Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367), Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625), Nickel-Chromium-Iron Alloys (UNS N06600 and N06690), and Nickel-Chromium-Iron-Columbium-Molybdenum (UNS N07718) Alloy Pipe Flanges, Fittings, Valves, and Parts
  • B835 – 14(2020) Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction
  • B836 – 00(2015) Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction
  • B837 – 19 Specification for Seamless Copper Tube for Natural Gas and Liquified Petroleum (LP) Gas Fuel Distribution Systems
  • B839 – 04(2014) Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod-Inclined Wedge Method
  • B840 – 15 Specification for Electrodeposited Coatings of Zinc Cobalt Alloy Deposits
  • B841 – 18 Specification for Electrodeposited Coatings of Zinc Nickel Alloy Deposits
  • B842 – 99(2016) Specification for Electrodeposited Coatings of Zinc Iron Alloy Deposits
  • B843 – 18e1 Specification for Magnesium Alloy Anodes for Cathodic Protection
  • B844 – 98(2016) Guide for Silver-Tin Oxide Contact Material
  • B845 – 97(2018) Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts
  • B846 – 19a Terminology for Copper and Copper Alloys
  • B848 – 15 Specification for Powder Forged (PF) Ferrous Materials
  • B849 – 02(2019) Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
  • B850 – 98(2015) Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
  • B851 – 04(2020) Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
  • B852 – 16e1 Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel
  • B853 – 16 Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components
  • B854 – 98(2016) Guide for Measuring Electrical Contact Intermittences
  • B855 – 17 Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
  • B856 – 18 Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)
  • B857 – 18 Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)
  • B858 – 06(2018) Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
  • B859 – 13(2018) Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
  • B860 – 18 Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
  • B861 – 19 Specification for Titanium and Titanium Alloy Seamless Pipe
  • B862 – 19 Specification for Titanium and Titanium Alloy Welded Pipe
  • B863 – 19 Specification for Titanium and Titanium Alloy Wire
  • B864/B864M – 19 Specification for Corrugated Aluminum Box Culverts
  • B865 – 20 Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy Bar, Rod, Wire, Forgings, and Forging Stock
  • B866 – 95(2018) Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
  • B867 – 95(2018) Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
  • B869 – 07(2018) Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire
  • B870 – 08(2014) Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)
  • B872 – 19 Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip
  • B873 – 17 Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
  • B874 – 96(2018) Specification for Chromium Diffusion Coating Applied by Pack Cementation Process
  • B875 – 96(2018) Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
  • B877 – 96(2018) Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method
  • B878 – 97(2019) Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors
  • B879 – 17 Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys
  • B880 – 14(2019) Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
  • B880-RU-RU – 14(2019) Стандартные технические условия на общие требования к пределам химического контрольного анализа никеля, никелевых сплавов и кобальтовых сплавов
  • B881 – 17 Terminology Relating to Aluminum- and Magnesium-Alloy Products
  • B882 – 10(2018) Specification for Pre-Patinated Copper for Architectural Applications
  • B883 – 19 Specification for Metal Injection Molded (MIM) Materials
  • B884 – 11(2019) Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
  • B885 – 09(2020) Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts
  • B886 – 19 Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides
  • B887 – 12(2019) Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
  • B888/B888M – 19 Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
  • B890 – 20 Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
  • B891/B891M – 19 Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes with Enhanced Surface for Improved Heat Transfer
  • B892 – 10(2015) Specification for ACuZinc5
  • B893 – 98(2018) Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications
  • B894 – 17 Specification for ACuZinc5
  • B895 – 16(2020)e1 Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution
  • B896 – 10(2020) Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials
  • B897 – 18 Specification for Configuration of Zinc and Zinc Alloy Jumbo, Block, Half Block, and Slab Ingot
  • B898 – 20 Specification for Reactive and Refractory Metal Clad Plate
  • B899 – 18 Terminology Relating to Non-ferrous Metals and Alloys
  • B900 – 16 Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
  • B901 – 04(2015) Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction
  • B902/B902M – 13(2018) Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction
  • B903 – 15 Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
  • B904 – 00(2014) Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding
  • B905 – 00(2016) Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
  • B906 – 19 Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
  • B906 – 19 Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
  • B907 – 16 Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders
  • B908 – 19 Practice for the Use of Color Codes for Zinc Casting Alloy Ingot
  • B909 – 17 Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
  • B910/B910M – 07(2018) Specification for Annealed Copper-Clad Steel Wire
  • B911/B911M – 12(2016) Specification for ACSR Twisted Pair Conductor (ACSR/TP)
  • B912 – 02(2018) Specification for Passivation of Stainless Steels Using Electropolishing
  • B913 – 05(2015) Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
  • B914 – 19 Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
  • B915 – 01(2017) Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating
  • B916 – 01(2017) Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal
  • B917/B917M – 12(2020) Practice for Heat Treatment of Aluminum-Alloy Castings From All Processes
  • B918/B918M – 20a Practice for Heat Treatment of Wrought Aluminum Alloys
  • B919 – 19 Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement
  • B920 – 16 Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
  • B921 – 08(2018) Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys
  • B922 – 20 Test Method for Metal Powder Specific Surface Area by Physical Adsorption
  • B923 – 20 Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
  • B924 – 02(2017) Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins
  • B925 – 15 Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
  • B926 – 09(2017) Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table
  • B927/B927M – 17 Specification for Brass Rod, Bar, and Shapes
  • B928/B928M – 15 Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments
  • B929 – 17 Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar
  • B930 – 03(2017) Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
  • B931 – 14(2018)e1 Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts
  • B933 – 20 Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials
  • B934 – 15 Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements
  • B935 – 20 Guide for Steam Treatment of Ferrous Powder Metallurgy (PM) Materials
  • B936 – 19 Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar
  • B937 – 18 Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)
  • B939 – 15 Test Method for Radial Crushing Strength, K, of Powder Metallurgy (PM) Bearings and Structural Materials
  • B940 – 05(2020) Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces
  • B941 – 16 Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
  • B942 – 10(2015) Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
  • B943 – 16 Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
  • B944 – 11(2016) Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)
  • B945 – 06(2014) Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10–Type Tempers
  • B946 – 11(2016) Test Method for Surface Finish of Powder Metallurgy (PM) Products
  • B947 – 14(2020)e1 Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
  • B949 – 18 Specification for General Requirements for Zinc and Zinc Alloy Products
  • B950 – 20 Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
  • B951 – 11(2018) Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought
  • B952/B952M – 19 Specification for Zinc Alloys in Ingot Form for Spin Casting
  • B953 – 13 Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
  • B954 – 15 Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry
  • B955/B955M – 18 Specification for Aluminum-Alloy Centrifugal Castings
  • B956 – 19e1 Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins
  • B957/B957M – 19 Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors
  • B958/B958M – 19 Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
  • B960 – 18 Specification for Prime Western Grade-Recycled (PWG-R) Zinc
  • B961 – 13(2019) Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application
  • B962 – 17 Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
  • B963 – 17 Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
  • B964 – 16 Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
  • B965 – 09(2018) Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability
  • B967/B967M – 18 Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire
  • B968/B968M – 16 Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube
  • B969/B969M – 18e1 Specification for Aluminum-Alloy Castings Produced by Squeeze Casting, and the Semi-Solid Thixocast and Rheocast Casting Processes
  • B971 – 10(2020)e1 Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application
  • B972 – 10(2020)e1 Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application
  • B973 – 10(2020)e1 Specification for Tin-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application
  • B974/B974M – 16(2021) Specification for Free-Cutting Bismuth Brass Rod, Bar and Wire
  • B975 – 18e1 Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
  • B976 – 11(2015) Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum Conductors, Composite Reinforced (ACCR)
  • B977/B977M – 19 Specification for Titanium and Titanium Alloy Ingots
  • B977/B977M-RU-RU – 19 Технические условия на литые заготовки из титана и сплава титана
  • B978/B978M – 14 Specification for Concentric-Lay-Stranded Aluminum Conductors, Composite Reinforced (ACCR)
  • B979 – 12(2018) Specification for Non-Specular (NS) Surface Finish on Overhead Aluminum Electrical Conductors
  • B981/B981M – 19 Specification for Low-Leaded Brass Rod, Bar, Wire, and Shapes
  • B982 – 20 Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis
  • B983 – 16e1 Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube
  • B984 – 12(2020)e1 Specification for Electrodeposited Coatings of Palladium-Cobalt Alloy for Engineering Use
  • B985 – 12(2016) Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis
  • B986 – 13(2019) Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application
  • B987/B987M – 20 Specification for Carbon Fiber Thermoset Polymer Matrix Composite Core (CFC) for use in Overhead Electrical Conductors
  • B988 – 18 Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components
  • B989 – 19a Specification for High Fluidity (HF) Zinc-Aluminum Alloy in Ingot Form for Thin Wall Die Castings
  • B994/B994M – 15 Specification for Nickel-Cobalt Alloy Coating
  • B995 – 15a Test Method for Chloride Resistance Test for Chromium Electroplated Parts (Russian Mud Test)
  • B997 – 16e1 Specification for Zinc-Aluminum Alloys in Ingot Form for Hot-Dip Coatings
  • B998 – 17 Guide for Hot Isostatic Pressing (HIP) of Aluminum Alloy Castings
  • B999 – 15 Specification for Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate

Standar ASTM B1000-B1999

  • B1000 – 15 Practices for Casting Preparation and Test Procedure of Porcelain Enamel-lined Pipe, Fittings, and Valves for Use in the Municipal Wastewater, Sewage, and Water Treatment Industry
  • B1001 – 17 Specification for Copper Electrode Wire Used for Welding Seams of Steel Cans
  • B1002 – 16(2020) Specification for Refined Indium
  • B1003 – 16 Specification for Seamless Copper Tube for Linesets
  • B1004 – 16 Practice for Contact Performance Classification of Electrical Connection Systems
  • B1005 – 17 Specification for Copper-Clad Aluminum Bar for Electrical Purposes (Bus Bar)
  • B1006 – 17 Specification for Electrical Overhead Conductor Code Word Names
  • B1007 – 17 Specification for Welded Precipitation Hardenable or Cold Worked, Nickel Alloy Tube
  • B1008 – 18 Test Method for Stress-Strain Testing for Overhead Electrical Conductors
  • B1009 – 20 Specification for Titanium Alloy Bars for Near Surface Mounts in Civil Structures
  • B1010/B1010M – 19 Specification for Copper-Clad Steel Electrical Conductor for Tracer Wire Applications
  • B1011/B1011M – 19 Specification for Cobalt Alloy Spring Wire
  • B1013 – 20 Specification for High Fluidity (HF) Zinc-Aluminum Alloy Thin Wall Die Castings
  • B1014 – 20 Specification for Welded Copper and Copper Alloy Condenser and Heat Exchanger Tubes with a Textured Surface(s)
  • B1015 – 20 Practice for Form and Style of Standards Relating to Refined Nickel and Cobalt and Their Alloy

Standar ASTM seri C hingga G

Daftar Standar ASTM Internasional selanjutnya dapat dibuka pada artikel dari standarku.com yang lain.

Demikian artikel dari standarku.com mengenai Daftar standar ASTM Internasional seri B.

Mohon saran dari pembaca untuk kelengkapan isi artikel ini, silahkan saran tersebut dapat disampaikan melalui kolom komentar.

Baca artikel lain :

Sumber referensi :

Related Posts:

  • Standar Ukuran Pakaian Amerika Serikat Standar Ukuran pakaian Amerika Serikat adalah berbagai ukuran standar pakaian sesuai dengan standardisasi dari Amerika Serikat yakni US Standard Clothing Size. Penyusunan standar ukuran pakaian memiliki sejarah yang panjang hingga…
  • Mengenal Organisasi Standar Eropa CEN CEN adalah organisasi standar publik yang memiliki misi untuk mendorong ekonomi Eropa dalam perdagangan global, kesejahteraan warga dan lingkungan melalui infrastruktur yang efisien bagi pihak terkait untuk pengembangan, pemeliharaan, dan…
  • ISO 14644-5 operasional Cleanrooms ISO 14644-5 adalah Standar Internasional mengenai ruang bersih (Cleanrooms) dan lingkungan terkontrol terkait, khususnya tentang operasional. Versi terbaru yang masih berlaku dari standar ini adalah terbitan tahun 2004 dengan judul…
  • Standar CPLSO untuk saluran Listrik pada Crane Standar CPLSO adalah standar referensi dari Crane Power Line Standards Organisation untuk kesehatan dan keselamatan penggunaan Crane di area saluran listrik. Organisasi CPLSO CPLSO memainkan peran aktif dalam mempromosikan kesehatan…
  • Daftar Standar NEMA Daftar Standar NEMA adalah kumpulan judul standar dari National Electrical Manufacturers Association mengenai produsen peralatan listrik. Standar NEMA adalah standar dari asosiasi perdagangan terbesar produsen peralatan listrik di Amerika Serikat…
  • Daftar organisasi standar teknis Daftar organisasi standar teknis adalah kumpulan organisasi yang menyusun, merevisi dan menerbitkan berbagai standar dalam lingkup teknis di seluruh dunia. Tujuan Artikel ini adalah lanjutan dari artikel standarku.com dengan judul…
  • Standar IAPMO untuk Perpipaan dan Mekanik Standar IAPMO adalah standar dari International Association of Plumbing and Mechanical Officials mengenai perpipaan dan mekanik. Jadi, istilah IAPMO merupakan akronim dari “International Association of Plumbing and Mechanical Officials”. Organisasi…
  • Badan Standar Nasional Qatar QS Qatar General Organization for Standards and Metrology (QS) adalah Badan Standar Nasional dan organisasi standar untuk wilayah negara Qatar. Mengenai Badan Standar Nasional Qatar QS Satu-satunya organisasi standar yang ada…
  • Daftar Standar IEEE part 7-11 Daftar Standar IEEE part 7-11 adalah kumpulan judul standar IEEE dengan lingkup : Consumer Electronics, Electromagnetic Compatibility, Green and Clean Technology, Healthcare IT, Industry Applications. Standar IEEE merupakan suatu standar…
  • Mengenal Cenelec, organisasi standar teknik elektro Cenelec adalah organisasi atau badan internasional yang menerbitkan standar di bidang teknik kelistrikan (electrotechnical) untuk wilayah Eropa. Pengertian Cenelec Dari segi bahasa, Cenelec merupakan kependekan dari istilah dalam bahasa Perancis…
  • Daftar Standar ASTM F1-F999 Daftar Standar ASTM F1-F999 adalah kumpulan judul dokumen standar seri F1 hingga F999 yang diterbitkan oleh organisasi ASTM (American Standard Testing and Material). ASTM atau American Standard Testing and Material…
  • Daftar Standar NACE AMPP Part 4 Daftar Standar NACE AMPP Part 4 adalah kumpulan judul standar dari NACE dan AMPP untuk industri pengendalian korosi dan perlindungan dampak buruk korosi. Standar NACE adalah standar dari National Association…
  • Standar Metode MSA Measurement System Analysis MSA (Measurement System Analysis) adalah suatu metode standar mengenai analisa sistem pengukuran yang dilakukan dengan berbagai parameter berikut : Identifikasi karakteristik yang akan diukurPerbandingan dengan SpesifikasiPemilihan jenis alat ukur yang…
  • Daftar Standar ASTM F3000-F3999 Daftar Standar ASTM F3000-F3999 adalah kumpulan judul dokumen standar seri F3000 hingga F3999 yang diterbitkan oleh organisasi ASTM (American Standard Testing and Material). ASTM atau American Standard Testing and Material…
  • Badan Standardisasi Argentina IRAM Badan Standardisasi Argentina adalah IRAM, yang merupakan perwakilan badan anggota ISO untuk negara Argentina. Badan Standardisasi Argentina IRAM Instituto Argentino de Normalización y Certificación (IRAM) adalah suatu badan nirlaba swasta…

Leave a Comment