Daftar Standar ASTM F1-F999 adalah kumpulan judul dokumen standar seri F1 hingga F999 yang diterbitkan oleh organisasi ASTM (American Standard Testing and Material).
ASTM atau American Standard Testing and Material adalah sebuah organisasi dunia yang mengembangkan standardisasi teknik untuk material, produk, sistem dan jasa.
Organisasi standardisasi internasional yang bersifat sukarela ini berpusat di kota Pennsylvania, Amerika Serikat.
Lebih jelas mengenai ASTM Internasional dapat dibaca pada artikel lain dari standarku.com berikut :
- Organisasi Standar ASTM
- Daftar standar ASTM Internasional A
- Daftar Standar ASTM B
- Daftar Standar ASTM C
- Daftar standar ASTM D1-D4000
- Daftar Standar ASTM D4001-D5000
- Daftar Standar ASTM D5001-D6000
- Daftar Standar ASTM D6001-D7000
- Daftar Standar ASTM D7001-D8378
- Daftar Standar ASTM E1-E999
- Daftar Standar ASTM E1000-E1999
- Daftar Standar ASTM E2000-E2999
- Daftar Standar ASTM E3000-E3999
Artikel ini merupakan lanjutan dari artikel sebelumnya sebagaimana link diatas, dengan fokus ke pengetahuan mengenai standar apa saja yang sudah dibuat oleh ASTM.
Daftar standar ASTM Internasional terdiri dari seri A, B, C, … dan seterusnya hingga seri G.
Dikarenakan sangat banyak jumlah standar tersebut maka artikel menjadi terlalu panjang, oleh karena itu standarku.com memecah menjadi beberapa artikel.
Format penulisan Standar ASTM Internasional
Tata cara penulisan standar ini biasanya diawali dengan huruf dan diikuti dengan nomor, yang ditetapkan secara berurutan.
Ada pilihan (opsional) untuk diikuti oleh tanda hubung dan dua digit terakhir yang berarti tahun di mana standar tersebut diadopsi.
Kode huruf awalan yang ditulis memiliki arti bahwa standar tersebut sesuai dengan subjek sebagaimana berikut :
- A = Iron and Steel Materials (Bahan baku Besi dan Baja)
- B = Nonferrous Metal Materials (Bahan baku Logam Nonferrous)
- C = Ceramic, Concrete, and Masonry Materials (Bahan Keramik, Beton, dan Batu)
- D = Miscellaneous Materials (Bahan Lain-lain)
- E = Miscellaneous Subjects (Subyek Lain-Lain)
- F = Materials for Specific Applications (Bahan baku untuk Aplikasi yang khusus)
- G = Corrosion, Deterioration, and Degradation of Materials (Korosi, Deteriorasi, dan Degradasi dari bahan baku)
Kategori Standar ASTM F1-F999
Berikut ini adalah daftar Standar ASTM Internasional seri F1-F999, yang mencakup standar yang masih aktif saat ini atau yang sudah ditarik.
Standar ASTM yang ditarik (withdrawn standard) adalah standar yang telah dihentikan (discontinued) oleh komite sponsornya, salah satunya adalah standar berikut :
- F568M Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners. Withdrawn January 2012 due to ISO 898-1.
Suatu standar ASTM dapat dilakukan penarikan,dengan atau tanpa adanya penggantian dengan standar atau aturan yang lebih baru.
Untuk memudahkan, terdapat pemisahan kategori standar berdasarkan urutan kode ASTM F1-F999 sebagaimana berikut :
- F1-F099
- F100-F199
- F200-F299
- F300-F399
- F400-F499
- F500-F599
- F600-F699
- F700-F799
- F800-F899
- F900-F999
Daftar Standar ASTM F1-F999
Berikut adalah Daftar standar ASTM Internasional untuk seri F1-F999.
Sedangkan untuk seri F1000 dan seterusnya hingga seri G, tersedia di artikel selanjutnya dari standarku.com karena terlalu panjang jika digabung dalam satu artikel.
Standar ASTM F1-F099
- F7-95(2016) Specification for Aluminum Oxide Powder
- F14-80(2019) Practice for Making and Testing Reference Glass-Metal Bead-Seal
- F15-04(2017) Specification for Iron-Nickel-Cobalt Sealing Alloy
- F16-12(2017) Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps
- F17-20 Terminology Relating to Primary Barrier Packaging
- F18-12(2017) Specification and Test Method for Evaluation of Glass-to-Metal Headers Used in Electron Devices
- F19-11(2016) Test Method for Tension and Vacuum Testing Metallized Ceramic Seals
- F21-20 Test Method for Hydrophobic Surface Films by the Atomizer Test
- F22-13 Test Method for Hydrophobic Surface Films by the Water-Break Test
- F22-RU-RU-13 Стандартный метод испытания для определения гидрофобных поверхностных пленок путем испытания с образованием капель воды на поверхности
- F24-20 Test Method for Measuring and Counting Particulate Contamination on Surfaces
- F25/F25M-09(2015) Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas
- F29-97(2017) Specification for Dumet Wire for Glass-to-Metal Seal Applications
- F30-96(2017) Specification for Iron-Nickel Sealing Alloys
- F31-16 Specification for Nickel-Chromium-Iron Sealing Alloys
- F34-13(2018) Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials
- F36-15 Test Method for Compressibility and Recovery of Gasket Materials
- F37-06(2019) Test Methods for Sealability of Gasket Materials
- F38-18 Test Methods for Creep Relaxation of a Gasket Material
- F44-16 Specification for Metallized Surfaces on Ceramic
- F50-12(2015) Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
- F51/F51M-20 Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
- F67-13(2017) Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)
- F68-16 Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices
- F72-21 Specification for Gold Wire for Semiconductor Lead Bonding
- F73-96(2017) Specification for Tungsten-Rhenium Alloy Wire for Electron Devices and Lamps
- F75-18 Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)
- F76-08(2016)e1 Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
- F79-69(2019) Specification for Type 101 Sealing Glass
- F83-71(2018) Practice for Definition and Determination of Thermionic Constants of Electron Emitters
- F85-76(2018) Practice for Nomenclature for Wire Leads Used as Conductors in Electron Tubes
- F86-13 Practice for Surface Preparation and Marking of Metallic Surgical Implants
- F88/F88M-15 Test Method for Seal Strength of Flexible Barrier Materials
- F88/F88M-RU-RU-15 Стандартный метод испытания прочности соединения гибкого барьерного материала
- F90-14 Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
- F91-06(2019) Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector
- F96-77(2020) Specification for Electronic Grade Alloys of Copper and Nickel in Wrought Forms
- F99-07(2015) Guide for Writing a Specification for Flexible Barrier Rollstock Materials
Standar ASTM F100-F199
- F104-11(2020) Standard Classification System for Nonmetallic Gasket Materials
- F105-72(2019) Specification for Type 58 Borosilicate Sealing Glass
- F106-12(2017) Specification for Brazing Filler Metals for Electron Devices
- F109-12(2018) Terminology Relating to Surface Imperfections on Ceramics
- F109-12(2018) Terminology Relating to Surface Imperfections on Ceramics
- F112-00(2019) Test Method for Sealability of Enveloped Gaskets
- F116-12(2016) Specification for Medical Screwdriver Bits
- F118-13 Standard Definitions of Terms Relating to Gaskets
- F119-82(2015) Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)
- F136-13 Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)
- F136-RU-RU-13 Стандартные технические условия на кованый ультрамелкозернистый сплав титана-алюминия-6-ванадия 4 для применения в хирургических имплантатах (UNS R56401)
- F137-08(2018) Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus
- F138-19 Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)
- F139-19 Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)
- F140-98(2020) Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods
- F141-12(2020) Terminology Relating to Resilient Floor Coverings
- F144-80(2019) Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods
- F145-72(2016) Practice for Evaluating Flat-Faced Gasketed Joint Assemblies
- F146-12(2019)e1 Test Methods for Fluid Resistance of Gasket Materials
- F147-87(2017) Test Method for Flexibility of Non-Metallic Gasket Materials
- F148-13(2019) Test Method for Binder Durability of Cork Composition Gasket Materials
- F150-06(2018) Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring
- F152-95(2017) Test Methods for Tension Testing of Nonmetallic Gasket Materials
- F180-94(2020) Test Method for Density of Fine Wire and Ribbon Wire for Electronic Devices
Standar ASTM F200-F299
- F204-76(2018) Test Method for Surface Flaws in Tungsten Seal Rod and Wire
- F205-94(2020) Test Method for Measuring Diameter of Fine Wire by Weighing
- F218-13(2020) Test Method for Measuring Optical Retardation and Analyzing Stress in Glass
- F219-96(2018) Test Methods of Testing Fine Round and Flat Wire for Electron Devices and Lamps
- F256-05(2020) Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium
- F269-60(2019) Test Method for Sag of Tungsten Wire
- F288-96(2019) Specification for Tungsten Wire for Electron Devices and Lamps
- F289-96(2019) Specification for Molybdenum Wire and Rod for Electronic Applications
- F290-94(2020) Specification for Round Wire for Winding Electron Tube Grid Laterals
Standar ASTM F300-F399
- F302-09(2015) Practice for Field Sampling of Aerospace Fluids in Containers
- F303-08(2016) Practices for Sampling for Particles in Aerospace Fluids and Components
- F307-13(2020) Practice for Sampling Pressurized Gas for Gas Analysis
- F309-18 Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
- F310-07(2020) Practice for Sampling Cryogenic Aerospace Fluids
- F311-08(2020) Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
- F312-08(2016) Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
- F316-03(2019) Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test
- F319-19 Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements
- F320-16 Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures
- F326-17 Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes
- F327-08(2015) Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method
- F330-16 Test Method for Bird Impact Testing of Aerospace Transparent Enclosures
- F331-13(2020) Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
- F336-02(2016) Practice for Design and Construction of Nonmetallic Enveloped Gaskets for Corrosive Service
- F355-16e1 Test Method for Impact Attenuation of Playing Surface Systems, Other Protective Sport Systems, and Materials Used for Athletics, Recreation and Play
- F363-99(2018) Test Method for Corrosion Testing of Gaskets
- F364-96(2019) Specification for Molybdenum Flattened Wire for Electron Tubes
- F366-17 Specification for Fixation Pins and Wires
- F373-13(2017) Test Method for Embossed Depth of Resilient Floor Coverings
- F375-20 Specification for Integrated Circuit Lead Frame Material
- F377-03(2015) Practice for Calibration of Braking/Tractive Measuring Devices for Testing Tires
- F381-16 Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
- F382-17 Specification and Test Method for Metallic Bone Plates
- F384-17 Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
- F386-17 Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces
- F387-17 Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
- F392/F392M-11(2015) Practice for Conditioning Flexible Barrier Materials for Flex Durability
- F395-19 Terminology Relating to Vacuum Cleaners
Standar ASTM F400-F499
- F400-20 Standard Consumer Safety Specification for Lighters
- F402-18 Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
- F404-20 Standard Consumer Safety Specification for High Chairs
- F406-19 Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
- F408-99(2015) Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using a Towed Trailer
- F409-17 Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
- F410-08(2017) Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement
- F412-20a Terminology Relating to Plastic Piping Systems
- F414-15 Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger
- F420-04(2014) Test Method for Access Depth Under Furniture of Vacuum Cleaners
- F421-15 Test Method for Measuring Groove and Void Depth in Passenger Car Tires
- F428-19 Test Method for Intensity of Scratches on Aerospace Glass Enclosures
- F430-13(2018) Specification for Paper Used for Vacuum Cleaner Filter Bags
- F431-04(2013) Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners
- F432-19 Specification for Roof and Rock Bolts and Accessories
- F433-02(2020) Practice for Evaluating Thermal Conductivity of Gasket Materials
- F434-93(2017) Test Method for Blow-Out Testing of Preformed Gaskets
- F436/F436M-19 Specification for Hardened Steel Washers Inch and Metric Dimensions
- F437-15 Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
- F438-17 Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
- F439-19 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
- F441/F441M-20 Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
- F442/F442M-20 Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
- F444-88(2017) Standard Consumer Safety Specification for Scald-Preventing Devices and Systems in Bathing Areas
- F445-88(2017) Standard Consumer Safety Specification for Thermal-Shock-Preventing Devices and Systems in Showering Areas
- F446-19 Standard Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area
- F448-18 Test Method for Measuring Steady-State Primary Photocurrent
- F449-20 Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
- F450-13(2019) Test Methods for Vacuum Cleaner Hose—Durability and Reliability (Plastic)
- F451-16 Specification for Acrylic Bone Cement
- F452-76(2014) Specification for Preformed Cranioplasty Plates
- F457-04(2017) Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analog or Digital Instrumentation
- F458-13(2018) Practice for Nondestructive Pull Testing of Wire Bonds
- F459-13(2018) Test Methods for Measuring Pull Strength of Microelectronic Wire Bonds
- F467-13(2018) Specification for Nonferrous Nuts for General Use
- F467M-06a(2018) Specification for Nonferrous Nuts for General Use (Metric)
- F468-16 Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
- F468M-06(2018) Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
- F472-11(2017) Terminology for Geometry of Alpine Skis
- F473-09(2017) Specification for Binding Mounting Area Dimensions on Alpine Skis and Bindings
- F476-14 Test Methods for Security of Swinging Door Assemblies
- F477-14 Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
- F478-14a(2019) Specification for In-Service Care of Insulating Line Hose and Covers
- F479-06(2017) Specification for In-Service Care of Insulating Blankets
- F480-14 Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
- F481-97(2019) Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
- F482-09(2020) Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals
- F483-09(2020) Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals
- F484-08(2019) Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds
- F484-RU-RU-08(2019) Стандартный метод испытания акрилового пластика на образование волосных трещин под напряжением при контакте с жидкими или полужидкими веществами
- F485-08(2019) Practice for Effects of Cleaners on Unpainted Aircraft Surfaces
- F486-01(2018) Practice for Preparation of Use and Care Booklets for Vacuum Cleaners
- F487-13(2018) Specification for Fine Aluminum–1 % Silicon Wire for Semiconductor Lead-Bonding
- F493-20 Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
- F494-05(2016) Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
- F495-99a(2019) Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures
- F496-20 Specification for In-Service Care of Insulating Gloves and Sleeves
- F498-19 Test Method for Center Spring Constant and Spring Constant Balance of Alpine Skis
Standar ASTM F500-F599
- F502-08(2019) Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces
- F504-05(2017) Test Method for Measuring the Quasi-Static Release Moments of Alpine Ski Bindings
- F510/F510M-20 Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
- F511-17 Test Method for Quality of Cut (Joint Tightness) of Resilient Floor Tile
- F512-19 Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
- F513-12(2018) Specification for Eye and Face Protective Equipment for Hockey Players
- F519-18 Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
- F520-16 Test Method for Environmental Resistance of Aerospace Transparencies to Artificially Induced Exposures
- F521-16 Test Methods for Bond Integrity of Transparent Laminates
- F526-16 Test Method for Using Calorimeters for Total Dose Measurements in Pulsed Linear Accelerator or Flash X-ray Machines
- F537-01(2019) Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials
- F538-13 Terminology Relating to the Characteristics and Performance of Tires
- F539-01(2017) Practice for Fitting Athletic Footwear
- F541-12(2020) Specification for Alloy Steel Eyebolts
- F543-17 Specification and Test Methods for Metallic Medical Bone Screws
- F547-17 Terminology of Nails for Use with Wood and Wood-Base Materials
- F548-19 Test Method for Intensity of Scratches on Aerospace Transparent Plastics
- F551/F551M-16 Practice for Using a 1.707-m (67.23-in.) Diameter Laboratory Test Roadwheel in Testing Tires
- F552-14(2019) Terminology Relating to Chain Link Fencing
- F555-01(2016) Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner
- F558-18 Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners
- F559-05(2017) Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel
- F560-17 Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400)
- F561-19 Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
- F562-13 Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)
- F564-17 Specification and Test Methods for Metallic Bone Staples
- F565-04(2018) Practice for Care and Handling of Orthopedic Implants and Instruments
- F567-14a(2019) Practice for Installation of Chain-Link Fence
- F571-87(2016) Practice for Installation of Exit Devices in Security Areas
- F585-16 Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
- F588-17 Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact
- F589-17 Standard Consumer Safety Specification for Non-Powder Guns
- F590-12(2018) Standard Consumer Safety Specification for Non-Powder Gun Projectiles and Propellants
- F593-17 Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
- F594-09(2020) Specification for Stainless Steel Nuts
Standar ASTM F600-F699
- F601-18 Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants
- F602-09(2015) Standard Criteria for Implantable Thermoset Epoxy Plastics
- F603-12(2020) Specification for High-Purity Dense Aluminum Oxide for Medical Application
- F606/F606M-19 Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
- F607-03(2019) Test Method for Adhesion of Gasket Materials to Metal Surfaces
- F608-18 Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners
- F609-05(2013) Test Method for Using a Horizontal Pull Slipmeter (HPS)
- F610/F610M-15 Practice for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
- F615M-95(2013) Practice for Determining Safe Current Pulse-Operating Regions for Metallization on Semiconductor Components (Metric)
- F619-20 Practice for Extraction of Materials Used in Medical Devices
- F620-20 Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition
- F621-12(2017) Specification for Stainless Steel Forgings for Surgical Implants
- F623-19 Standard Performance Specification for Foley Catheter
- F624-09(2015)e1 Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications
- F625/F625M-94(2017) Practice for Classifying Water Bodies for Spill Control Systems
- F626-14(2019) Specification for Fence Fittings
- F628-12e3 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
- F629-20 Practice for Radiography of Cast Metallic Surgical Implants
- F631-15(2020) Guide for Collecting Skimmer Performance Data in Controlled Environments
- F639-09(2015) Specification for Polyethylene Plastics for Medical Applications
- F640-20 Test Methods for Determining Radiopacity for Medical Use
- F641-09(2014) Specification for Implantable Epoxy Electronic Encapsulants
- F645-18b Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
- F647-94(2014) Practice for Evaluating and Specifying Implantable Shunt Assemblies for Neurosurgical Application
- F648-14 Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
- F654-07(2017) Specification for Residential Chain Link Fence Gates
- F655-13 Specification for Test Carpets and Pads for Vacuum Cleaner Testing
- F656-15 Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
- F659-10(2018) Specification for Ski and Snowboard Goggles
- F660-83(2019) Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
- F665-09(2015) Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application
- F667/F667M-16 Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
- F668-17 Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric
- F670-02(2017) Specification for Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing
- F679-16 Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
- F680-20 Test Methods for Nails
- F680-20 Test Methods for Nails
- F681-82(2018) Practice for Use of Branch Connections
- F682-82a(2018) Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
- F683-14 Practice for Selection and Application of Thermal Insulation for Piping and Machinery
- F688-19 Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035)
- F693-01(2018)e1 Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers
- F696-06(2019) Specification for Leather Protectors for Rubber Insulating Gloves and Mittens
- F697-16 Practice for Care and Use of Athletic Mouth Protectors
Standar ASTM F700-F799
- F700-93(2014) Practice for Care and Handling of Intracranial Aneurysm Clips and Instruments
- F702-18 Specification for Polysulfone Resin for Medical Applications
- F703-18 Specification for Implantable Breast Prostheses
- F704-81(2018)e1 Practice for Selecting Bolting Lengths for Piping System Flanged Joints
- F707/F707M-94(2019)e1 Specification for Modular Gauge Boards
- F708-92(2018)e1 Practice for Design and Installation of Rigid Pipe Hangers
- F710-19e1 Practice for Preparing Concrete Floors to Receive Resilient Flooring
- F711-17 Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools
- F712-06(2018) Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers
- F714-13(2019) Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
- F715-07(2018) Test Methods for Coated Fabrics Used for Oil Spill Control and Storage
- F716-18 Test Methods for Sorbent Performance of Absorbents for Use on Chemical and Light Hydrocarbon Spills
- F718-07(2017) Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet
- F719-20e1 Practice for Testing Materials in Rabbits for Primary Skin Irritation
- F720-17 Practice for Testing Guinea Pigs for Contact Allergens: Guinea Pig Maximization Test
- F721-18 Specification for Gage Piping Assemblies
- F722-18 Specification for Welded Joints for Shipboard Piping Systems
- F724-94a(2016) Test Method for Outdoor Evaluation of Tire Sidewall Component Cracking Resistance
- F725-03(2018) Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards
- F726-17 Test Method for Sorbent Performance of Adsorbents for use on Crude Oil and Related Spills
- F732-17 Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses
- F733-19 Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
- F734-17 Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material
- F735-17 Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
- F736-17 Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
- F739-20 Test Method for Permeation of Liquids and Gases Through Protective Clothing Materials Under Conditions of Continuous Contact
- F744M-16 Test Method for Measuring Dose Rate Threshold for Upset of Digital Integrated Circuits (Metric)
- F746-04(2014) Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
- F747-15 Terminology Relating to Amusement Rides and Devices
- F747-FRCA-15 Terminologie standard au sujet des jeux et manègesz
- F747-SP-15 Terminología estándar relacionada con Juegos Mecánicos y Dispositivos
- F748-16 Practice for Selecting Generic Biological Test Methods for Materials and Devices
- F749-20 Practice for Evaluating Material Extracts by Intracutaneous Injection in the Rabbit
- F750-20 Practice for Evaluating Acute Systemic Toxicity of Material Extracts by Systemic Injection in the Mouse
- F754-08(2015) Specification for Implantable Polytetrafluoroethylene (PTFE) Sheet, Tube, and Rod Shapes Fabricated from Granular Molding Powders
- F755-19 Specification for Selection of Porous Polyethylene for Use in Surgical Implants
- F756-17 Practice for Assessment of Hemolytic Properties of Materials
- F758-14(2019) Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage
- F760-93(2017) Specification for Food Service Equipment Manuals
- F762/F762M-08(2020)e1 Test Method for Determining Change in Groove (or Void) Depth With Distance Traveled for Passenger Car Tires
- F763-04(2016) Practice for Short-Term Screening of Implant Materials
- F765-93(2017) Specification for Wildcats, Ship Anchor Chain
- F770-19 Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices
- F770-FRCA-19 Norme de pratique concernant la propriété, l’exploitation, l’entretien et l’inspection des jeux et manèges
- F770-SP-19 Práctica estándar para la propiedad, el funcionamiento, el mantenimiento y la inspección de juegos y dispositivos para parques de diversiones
- F773M-16 Practice for Measuring Dose Rate Response of Linear Integrated Circuits (Metric)
- F778-88(2014) Standard Methods for Gas Flow Resistance Testing of Filtration Media
- F779-12(2018) Test Method for Torsion Characteristic of Alpine Skis
- F780-93a(2018) Test Method for Linear Deformation and Breaking Strength of Alpine Skis
- F782-19 Specification for Doors, Furniture, Marine
- F783-88(2018) Specification for Staple, Handgrab, Handle, and Stirrup Rung
- F788-20 Specification for Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series
- F790-18 Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
- F791-18 Test Method for Stress Crazing of Transparent Plastics
- F792-17e1 Practice for Evaluating the Imaging Performance of Security X-Ray Systems
- F793/F793M-20 Standard Classification of Wall Coverings by Use Characteristics
- F794-03(2014) Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
- F799-19 Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)
Standar ASTM F800-F899
- F801-16 Test Method for Measuring Optical Angular Deviation of Transparent Parts
- F803-19 Specification for Eye Protectors for Selected Sports
- F806-99a(2017) Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
- F810-12(2018) Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
- F811-02(2016) Practice for Accelerometer Use in Vehicles for Tire Testing
- F812-12(2017) Specification for Surface Discontinuities of Nuts, Inch and Metric Series
- F813-20 Practice for Direct Contact Cell Culture Evaluation of Materials for Medical Devices
- F818-16(2020) Terminology Relating to Spill Response Booms and Barriers
- F819-10(2015) Terminology Relating to Electrical Protective Equipment for Workers
- F820-18 Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems
- F821/F821M-01(2018) Specification for Domestic Use Doors and Frames, Steel, Interior, Marine
- F822-93(2017) Specification for Chest of Drawers (Chiffonier), Steel, Marine
- F823-93(2017) Specification for Desk, Log, Marine, Steel, with Cabinet
- F824-93(2017) Specification for Tables, Mess, Marine, Steel
- F825-93(2017) Specification for Drawers, Furniture, Marine, Steel
- F826-94(2017) Specification for Tops, Furniture, Marine, Steel
- F832-90(2016) Standard Classification for Security Seals
- F833-19 Standard Consumer Safety Performance Specification for Carriages and Strollers
- F835-20 Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
- F836M-20 Specification for Style 1 Stainless Steel Metric Nuts (Metric)
- F837-20 Specification for Stainless Steel Socket Head Cap Screws
- F837M-20 Specification for Stainless Steel Socket Head Cap Screws (Metric)
- F838-20 Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration
- F839-15 Specification for Cautionary Labeling of Portable Gasoline, Kerosene, and Diesel Containers for Consumer Use
- F841-19 Specification for Thrusters, Tunnel, Permanently Installed in Marine Vessels
- F842-17 Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact
- F844-19 Specification for Washers, Steel, Plain (Flat), Unhardened for General Use
- F851-87(2020) Test Method for Self-Rising Seat Mechanisms
- F852/F852M-20 Specification for Portable Gasoline, Kerosene, and Diesel Containers for Consumer Use
- F855-20 Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment
- F856-97(2018) Practice for Mechanical Symbols, Shipboard—Heating, Ventilation, and Air Conditioning (HVAC)
- F857-17 Specification for Hot Water and Chemical Sanitizing Commercial Dishwashing Machines, Stationary Rack Type
- F858-18 Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Single Tank, Conveyor Rack Type
- F859-15 Specification for Heat-Sanitizing Commercial Dishwashing Machines, Multiple Tank, Conveyor Rack Type
- F860-07(2018)e1 Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type
- F861-14a(2019) Specification for Commercial Dishwashing Racks
- F862-11(2017) Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
- F868-17 Standard Classification for Laminated Composite Gasket Materials
- F870-94(2016) Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements
- F874-98(2019) Test Method for Temperature Measurement and Profiling for Microwave Susceptors
- F876-20b Specification for Crosslinked Polyethylene (PEX) Tubing
- F877-20 Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
- F879M-16 Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
- F879-15(2020) Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
- F880M-16 Specification for Stainless Steel Socket Set Screws (Metric)
- F880-12(2017) Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws
- F881-94(2014) Specification for Silicone Elastomer Facial Implants
- F883-13 Standard Performance Specification for Padlocks
- F884-01(2016) Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner
- F885-84(2017) Specification for Envelope Dimensions for Bronze Globe Valves NPS 14 to 2
- F887-20 Specifications for Personal Climbing Equipment
- F888-06(2018) Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner
- F891-16 Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
- F894-19 Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
- F895-11(2016) Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity
- F897-19 Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws
- F899-20 Specification for Wrought Stainless Steels for Surgical Instruments
Standar ASTM F900-F999
- F900-11(2017) Specification for Industrial and Commercial Steel Swing Gates
- F901-20 Specification for Aluminum Transmission Tower Bolts and Nuts
- F903-18 Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids
- F904-16 Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
- F905-04(2018) Practice for Qualification of Polyethylene Saddle-Fused Joints
- F906-85(2020) Specification for Letters and Numerals for Ships
- F910-04(2015) Specification for Face Guards for Youth Baseball
- F912-11(2017) Specification for Alloy Steel Socket Set Screws
- F913-02(2014) Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
- F914/F914M-20 Test Method for Acoustic Emission for Aerial Personnel Devices Without Supplemental Load Handling Attachments
- F917-19 Specification for Commercial Food Waste Disposers
- F918-15(2020)e1 Specification for Noncarbonated Mechanically Refrigerated Beverage Dispenser (Visible Product)
- F919-20 Specification for Slicing Machines, Food, Electric
- F921-10(2018) Terminology Relating to Hemostatic Forceps
- F922-01(2016) Test Method for Motor Life Evaluation of an Electric Motorized Nozzle
- F924-90(2015) Test Method for Resistance to Puncture of Cushioned Resilient Floor Coverings
- F925-13(2020) Test Method for Resistance to Chemicals of Resilient Flooring
- F934-96(2017) Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials
- F939-19 Practice for Selection of Release Torque Values for Alpine Ski Bindings
- F940-99(2019)e1 Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
- F941-99(2019) Practice for Inspection of Marine Surface Preparation and Coating Application
- F942-18 Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
- F945-12(2019) Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
- F946-85(2018) Guide for Establishing Security Seal Control and Accountability Procedures
- F949-20 Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
- F952-12(2017) Specification for Mixing Machines, Food, Electric
- F953-19 Specification for Commercial Dishwashing Machines (Stationary Rack, Dump Type) Chemical Sanitizing
- F955-15 Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances
- F956-91(2018) Specification for Bell, Cast, Sound Signalling
- F957-91(2018) Specification for Gong, Sound Signaling
- F95 F959/F959M-17a Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series
- F961-20 Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)
- F962-04(2018) Specification for Oil Spill Response Boom Connection: Z-Connector
- F963-17 Standard Consumer Safety Specification for Toy Safety
- F963-SP-17 Especificación Estándar de Seguridad para el Consumidor para la Seguridad en los Juguetes
- F964-13(2019) Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing
- F967-03(2018) Practice for Security Engineering Symbols
- F969-11(2016) Practice for Construction of Chain-Link Tennis Court Fence
- F970-17 Test Method for Measuring Recovery Properties of Floor Coverings after Static Loading
- F977-18 Standard Consumer Safety Specification for Infant Walkers
- F980-16 Guide for Measurement of Rapid Annealing of Neutron-Induced Displacement Damage in Silicon Semiconductor Devices
- F981-04(2016) Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Insertion into Bone
- F983-86(2018) Practice for Permanent Marking of Orthopaedic Implant Components
- F985-18 Specification for Pilot Platform
- F986-86(2018)e1 Specification for Suction Strainer Boxes
- F987-04(2017) Specification for Portable Intermediate Flush Deck Stanchion
- F992-17 Specification for Valve Label Plates
- F993-17 Specification for Valve Locking Devices
- F994-86(2018) Specification for Design and Installation of Overboard Discharge Hull Penetration Connections
- F996-11(2018) Test Method for Separating an Ionizing Radiation-Induced MOSFET Threshold Voltage Shift Into Components Due to Oxide Trapped Holes and Interface States Using the Subthreshold Current–Voltage Characteristics
- F997-18 Specification for Polycarbonate Resin for Medical Applications
- F998-12(2018) Specification for Centrifugal Pump, Shipboard Use
Standar ASTM seri F hingga G
Daftar Standar ASTM Internasional selanjutnya dapat dibuka pada artikel dari standarku.com yang lain.
Demikian artikel dari standarku.com mengenai Daftar standar ASTM Internasional seri F1-F999.
Mohon saran dari pembaca untuk kelengkapan isi artikel ini, silahkan saran tersebut dapat disampaikan melalui kolom komentar.
Baca artikel lain :
Sumber referensi :