JAS-ANZ adalah badan akreditasi standar yang ditunjuk oleh pemerintah Australia dan Selandia Baru, yang bertanggung jawab untuk menyediakan akreditasi lembaga penilaian kesesuaian (badan sertifikasi) di bidang sertifikasi dan inspeksi.
Pengertian badan standar JAS-ANZ
JAS-ANZ merupakan istilah dan kependekan dari : Joint Accreditation System of Australia and New Zealand.
Badan akreditasi tersebut didirikan pada tahun 1991 oleh pemerintah Australia dan Selandia Baru untuk memperkuat hubungan perdagangan antara kedua negara dengan negara-negara lain.
JAS-ANZ juga termasuk salah satu anggota dari :
- Forum Akreditasi Internasional atau International Accreditation Forum (IAF)
- Asosiasi Badan Sertifikasi Terakreditasi atau Association of Accredited Certification Bodies (AACB).
Lembaga akreditasi ini mirip seperti Komite Akreditasi Nasional (KAN) dan The United Kingdom Accreditation Service (UKAS).
Kedua badan akreditasi diatas adalah badan akreditasi nasional, KAN untuk indonesia dan UKAS untuk Inggris (United Kingdom).
Per Juni 2009, JAS-ANZ sudah terakreditasi di 67 badan penilaian kesesuaian (conformity assessment bodies) yang telah disertifikasi lebih dari 50.000 organisasi di lebih dari 20 negara.
Akreditasi tersebut juga termasuk (tetapi independen) pada standar AS / NZS.
Kombinasi Standar Australia / New Zealand AS/NZS 4360:2004 dan COSO Enterprise Risk Management merupakan standar yang mengatur pendekatan yang sistematis untuk mengelola risiko dalam mencapai tujuan bagi suatu organisasi.
Sejarah badan standar JAS-ANZ
JAS-ANZ didirikan berdasarkan perjanjian internasional yang berjudul :
Agreement between Australia and New Zealand concerning the Establishment of the Council of the Joint Accreditation System of Australia and New Zealand (JAS-ANZ).
Perjanjian tersebut yang ditandatangani di Canberra pada tanggal 30 Oktober 1991, yang ditujukan untuk memperkuat hubungan perdagangan antara dua negara dan juga dengan negara lain.
Perjanjian JAS-ANZ mewajibkan JAS-ANZ untuk menjalankan sistem akreditasi bersama dan menyampaikan empat tujuan yang berkaitan dengan :
- Integritas dan Keyakinan (Integrity and Confidence)
- Dukungan Perdagangan (Trade Support)
- Hubungan dan Penerimaan Internasional (Linkages and International Acceptance)
Tujuan badan standar JAS-ANZ
Tujuan dari Joint Accreditation System of Australia and New Zealand (JAS-ANZ) adalah untuk :
- Meningkatkan perdagangan nasional, trans-tasman dan internasional melalui akreditasi
- Mendapatkan pengakuan internasional untuk keunggulan barang dan jasa dari Australia dan Selandia Baru.
JAS-ANZ bukanlah badan akreditasi yang hanya mengeruk keuntungan semata, tetapi merupakan organisasi pendanaan internasional.
Sebagaimana dinyatakan bahwa JAS-ANZ adalah organisasi internasional nirlaba (not for profit), yang mendanai dirinya sendiri (self-funding).
Organisasi ini juga bersifat non-diskriminatif, oleh karena itu JAS-ANZ akan menerima aplikasi dari lembaga penilaian akreditasi yang beroperasi dari manapun di dunia.
Aplikasi tersebut juga berasal dari badan penilaian kesesuaian atau conformity assessment bodies (CAB) yang beroperasi di mana saja di seluruh penjuru dunia.
Program badan standar JAS-ANZ
JAS-ANZ menawarkan program akreditasi dan akan bekerja sama dengan badan pengawas untuk menciptakan skema sertifikasi di berbagai bidang seperti :
- Proses bisnis dan peningkatan (Business processes and improvement)
- Perbaikan Lingkungan Hidup (Environment)
- Keamanan Pangan (Food Safety)
- Kesehatan dan Layanan Kemanusiaan (Health and Human Services)
JAS-ANZ menawarkan akreditasi untuk program-program berikut :
- Sistem sertifikasi manajemen seperti sistem manajemen mutu (AS/NZS ISO 9001), sistem manajemen lingkungan (AS/NZS ISO 14001), dan lain-lain.
- Sertifikasi produk seperti Codemark, Watermark dan lain-lain
- Sertifikasi personil
- Inspeksi
- Validasi dan verifikasi Gas Rumah Kaca (Greenhouse Gas)
Manfaat program akreditasi
Akreditasi memiliki banyak manfaat untuk seluruh rantai pasar baik untuk pihak bisnis, regulator, dan pemerintah melalui :
- mengurangi biaya kepatuhan dan transaksi,
- mengurangi resiko,
- merampingkan operasi,
- mendobrak hambatan perdagangan, yang memberikan akses lebih besar ke pasar luar negeri; dan
- memberikan jaminan bahwa barang dan jasa yang dijual aman dan dapat digunakan untuk tujuan yang dimaksudkan.
Sehingga akan memperkuat trade dan commerce di tingkat nasional, Trans-Tasman dan internasional.
Apa beda trade dan commerce?
Trade adalah lebih kepada individu atau perorangan, perusahaan ke perusahaan dalam pasar yang terbatas.
Sedangkan Commerce adalah kegiatan yang sama, tetapi secara kolektif atau massal.
Akreditasi juga dapat memberikan nilai tambah pada rantai pasar yang terus berkembang dan semakin rumit dalam banyak hal.
Termasuk dengan memberikan simbol jaminan bahwa pemberi sertifikasi dan pemeriksa berasal dari pihak yang independen dan kompeten untuk menjalankan tugasnya.
Sertifikasi dan inspeksi produk, proses, dan orang yang terakreditasi atau kegiatan penilaian kesesuaian (conformity assessment) memiliki efek riak melalui rantai pasar, langsung ke konsumen.
Hal ini memberi kepercayaan konsumen bahwa pembelian mereka memenuhi standar yang ditentukan dengan kualitas yang terjamin kepada pihak pengecer, grosir dan konsumen individu.
Akreditasi adalah simbol jaminan berupa adanya simbol JAS-ANZ yang merupakan tanda kualitas dan keandalan.
Hal ini menandai bahwa pemberi sertifikat atau pemeriksa dapat diandalkan untuk menentukan secara tidak memihak apakah organisasi, produk, dan orang-orang memenuhi persyaratan yang ditentukan.
Maka hal ini dapat menjadikan para pemberi sertifikasi, inspektur, dan organisasi klien mereka suatu keunggulan kompetitif.
Tanda Sertifikasi
JAS-ANZ akan memberikan tanda sertifikasi untuk digunakan pada barang dan jasa yang memenuhi persyaratan akreditasi.
Skema dan Standar JAS-ANZ
Management Systems :
Asset Management Systems Scheme :
- ISO 55001:2014 Asset Management – Management systems – Requirements
CCF Civil Contractors Federation Scheme Issue 2 :
- CCF Civil Construction Management Code: 2009 – Civil Contractors Federation – Civil Construction Management Code
Civil Contractors Federation Scheme :
- CCF Civil Construction Management Code: 2009 – Civil Contractors Federation – Civil Construction Management Code
- CCF Code, Issue 10 – Feb 2018 – Civil Construction Management Code (CCF Code), Issue 10 – Feb 2018
Environmental Management Systems Scheme :
- ISO 14001:2015 – Environmental management systems – Requirements with guidance for use
Food Safety Management Systems Scheme :
- ISO 22000:2005 – Food safety management systems – Requirements for any organization in the food chain
- ISO 22000:2018 – Food safety management systems – Requirements for any organization in the food chain
Forest Management Systems Scheme :
- AS 4708:2013 – Sustainable Forest Management
- NZS AS 4708:2014 – A new standard provides forest owners and managers with environmental, economic, social, and cultural criteria that support the sustainable management of forests.
Health Care Services Scheme :
- National Safety and Quality Health Service (NSQHS) Standards – National Safety and Quality Health Service (NSQHS) Standards 2011
Information Security Management Systems Scheme :
- ISO/IEC 27001:2013 – Information technology – Security techniques – Information security management systems – Requirements
National Safety and Quality Health Service Scheme :
- National Safety and Quality Health Service (NSQHS) Standards – National Safety and Quality Health Service (NSQHS) Standards 2011
Occupational Health and Safety Management System :
- AS/NZS 4801:2001 – Occupational health and safety management systems – specification with guidance for use.
- ISO 45001:2018 – Occupational health and safety management systems – Requirements with guidance for use
- OHSAS 18001:2007 – Occupational health and safety management systems. Requirements
Occupational Health and Safety Management System Scheme :
- AS/NZS 4801:2001 – Occupational health and safety management systems – specification with guidance for use.
- OHSAS 18001:2007 – Occupational health and safety management systems. Requirements
Quality Management Systems Scheme :
- Attendant Care Industry Management System Standard (ACIMSS)
- ISO 9001:2015 – Quality management systems – Requirements
Product Certification
Attendant Care Industry Certification Scheme :
- Attendant Care Industry Standard (ACIS) – ACIS
Australian Community Industry Certification Scheme :
- Australian Community Industry Standard 2018 (ACIS)
Australian Technical Infrastructure Committee :
- AS/NZS 1163:2016 Cold-formed structural steel hollow sections
- AS/NZS 3678:2016 Structural steel – Hot-rolled plates, floorplates and slabs
- AS/NZS 3679.1:2010 Structural steel – Hot-rolled bars and sections
- AS/NZS 3679.1:2016 Structural steel – Hot-rolled bars and sections
- AS/NZS 3679.2:2010 Structural steel – Welded I sections
- AS/NZS 3679.2:2016 Structural steel – Welded I sections
Australian Wood Packaging Certification Scheme :
- AWPCS v2.2 Appendix 1 Requirements for AWPCS heat treatment providers
- AWPCS v2.2 Appendix 3 Requirements for wood packing manufacturers without on-site treatment facility
- AWPCS v3 Appendix 1a Requirements for AWPCS heat treatment providers
- AWPCS v3 Appendix 3 Requirements for wood packing manufacturers without on-site treatment facility
- AWPCS v4 Appendix 1 Requirements for AWPCS heat treatment providers
- AWPCS v4 Appendix 5 Requirements for wood packaging manufacturers, no on-site treatment facilities
CodeMark Australia Scheme :
- Building Code of Australia (BCA) 2016
- Building Code of Australia (BCA) 2016/Amdt 1
- Building Code of Australia (BCA) 2019
- Building Code of Australia (BCA) 2019/Amdt 1
Codemark Scheme :
- BCA – all clauses
- NZBC – all clauses
Disability Employment Services and Supported Employment Services Scheme :
- National Standards for Disability Services 2014
Gas Cylinder Test Station Scheme :
- AS 2030.1 Gas cylinders – General requirements
- AS 2030.2 The verification, filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gases – Cylinders for dissolved acetylene
- AS 2030.4 The verification, filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gases – Welded cylinders – Insulated
- AS 2030.5 Gas cylinders – Filling, inspection and testing of refillable cylinders
- AS 2337.1 Gas Cylinder Test Stations Part 1: General requirements, inspection and tests – Gas Cylinders
- AS 2337.2 Gas cylinder test stations – LP Gas fuel vessels for automotive use
- AS 2337.3 Gas cylinder test stations – Transportable gas cylinders – Periodic inspection and testing of composite gas cylinders
Global-Mark Certified Gas Safety Scheme :
- AG 112 Approval Requirements for Incinerating Toilets
- AG 201 Manual Shut-off Gas Valves
- AG 202 Gas Appliance Regulators
- AG 203 Gas Appliance Thermostats
- AG 204 Thermoelectric Flame Safeguards
- AG 205 Regulators for use with Liquefied Petroleum – Vapour Phrase
- AG 206 Electrical and Electronic Ignition Devices for Gas Appliances
- AG 208 Jointing Compounds and Materials for Use in Gas Pipe Joints
- AG 209 Combination Controls for Gas
- AG 210 Electronic Flame Safeguards and Flame Detectors
- AG 211 Over-pressure and Under-pressure Cut Off Devices
- AG 212 Quick-connect Devices for Gas
- AG 213 Pressure and Temperature Limit Devices for use with Gas Burners
- AG 214 Automatic Shut-off Valves and Vent Valves
- AG 215 Leakage Detection Systems
- AG 216 Limited flexibility connectors for gas
- AG 403 Approval Requirements for Overhead Radiant Tube Heaters
- AG 404 Approval Requirements for LPG Mobile Industrial Direct Fired Air Heaters
- AG 604 Flue Cowls – Gas Appliances
- AG 605 Twin Wall Metal Flues – Gas Appliances
- AG 805 Approval Requirements for Natural Gas Vehicle (NGV) Components
- AG 806 Approval Requirements for Vehicle Refueling Appliances
- AG 807 Approval Requirements for Natural Gas Flexible Hose and Hose Assemblies for Pressures above 2.6 MPa
- AS 2658 LP Gas – Portable and mobile appliances
- AS 4551/AG 101 Domestic Gas Cooking Appliances
- AS 4552 Gas fired water heaters for hot water supply and/or central heating
- AS 4553/AG 103 Gas Space Heating Appliances
- AS 4554 Gas Laundry Dryers
- AS 4555/AG 105 Domestic Gas Refrigerators
- AS 4556/AG 106 Indirect Gas-Fired Ducted Air Heaters
- AS 4557 Domestic Outdoor Gas Barbecues
- AS 4560 Gas Pool Heaters
- AS 4563 Commercial Catering Gas Equipment
- AS 4565 Radiant Gas Heaters for Outdoor and Non-Residential indoor use
- AS 4566 Flue Cowls – Gas Appliances
- AS 4567 Twin Wall Metal Flues – Gas Appliances
- AS 4617 Manual Shut-off Gas Valves
- AS 4618 Gas Appliance Regulators
- AS 4619 Gas Appliance Thermostats
- AS 4620 Thermoelectric Flame Safeguards
- AS 4621 Regulators for use with Liquefied Petroleum – Vapour Phrase
- AS 4622 Electrical and Electronic Ignition Devices for Gas Appliances
- AS 4623 Jointing Compounds and Materials for Use in Gas Pipe Joints
- AS 4624 Combination Controls for Gas
- AS 4625 Electronic Flame Safeguards and Flame Detectors
- AS 4627 Quick-connect Devices for Gas
- AS 4628 Pressure and Temperature Limit Devices for use with Gas Burners
- AS 4629 Automatic Shut-off Valves and Vent Valves
- AS 4630 Leakage Detection Systems
- AS 4631 Limited flexibility connectors for gas
- AS 4632 Over-pressure and Under-pressure Cut Off Devices
- AS 5262-2011 LP Gas mobile industrial direct fired air heaters
- AS/NZS 1425 LP Gas Fuel Systems for Vehicle Engines Superseded to 1425:2013 Notification from Standards Watch [4-10-13]RG
- AS/NZS 1869 Hose and Hose Assemblies for Liquefied Petroleum Gases (LP gas) Natural Gas and Town Gas
- AS/NZS 5263.0:2017 Gas appliances General requirements
- AS/NZS 5263.1.1 Part 1.1: Domestic gas cooking appliances
- AS/NZS 5263.1.10:2019 Gas direct fired air heaters
- AS/NZS 5263.1.2 Gas appliances – Part 1.2: Gas fired water heaters for hot water supply and/or central heating
- AS/NZS 5263.1.3 Gas appliances – Gas space heating appliances
- AS/NZS 5263.1.4:2017 Gas appliances – Part 1.4: Radiant gas heaters
- AS/NZS 5263.1.6:2016 Gas appliances – Indirect gas-fired ducted air heaters
- AS/NZS 5263.1.7 Gas appliances – Domestic outdoor gas barbecues
- AS/NZS 5263.1.8 Gas appliances – Decorative effect gas appliances
- AS/NZS 5263.1.8:2016 Gas appliances – Decorative effect gas appliances
- AS/NZS 5263.1.9:2019 Gas appliances, Part 1.9: Gas laundry dryers
- EN 298 Automatic Gas Burner Control Systems for Gas Burners and Gas Burning Appliances with or without Fans.
Global-Mark Electrical Product Safety Certification Scheme :
- Terdiri dari banyak standar AS/NZS dan IEC untuk kategori ini, sehingga tidak kami tampilkan di artikel ini.
Global-Mark Product Conformance – Certified product type program :
- AS 4586 Slip resistance classification for new pedestrian surface material
- AS/NZS 4020 Testing of products for use in contact with drinking water
- AS/NZS 4020:2005 Testing of products for use in contact with drinking water
- AS/NZS 4020:2018 Testing of products for use in contact with drinking water
- AS/NZS 6400 AS/NZS 6400-2005 : Water efficient products – Rating and labelling including Amendments 1 to 6
- EN 14179-1:2016 Glass in building – heat soaked thermally toughened soda lime silicate saftey glass – Part 1: definition and description
Global-Mark Product Conformance Scheme :
- Terdiri dari banyak standar untuk kategori ini seperti : AG, AS, AS/NZS, ASTM, BS, DIN, EN, IEC, ISO, MP, MS, NFPA, WSA, sehingga tidak kami tampilkan di artikel ini.
Human Services in Victoria Scheme :
- Department of Human Services Standards (DHSS) 2011
- Standards for disability services in Victoria (DSV) – Comprising the Industry Standards for Disability Services in Victoria and the Outcome Standards for Disability Services in Victoria (SDSV); plus the relevant evidence indicators
Human Services Quality Framework Scheme :
- Human Services Quality Standards (HSQS)
National Disability Advocacy Program Scheme :
- National Standards for Disability Services 2014
National Disability Insurance Scheme (Approved Quality Auditors Scheme) :
- NDIS (Provider Registration and Practice Standards) Rules 2018 (Compilation No. 2, 27 June 2020)
- NDIS (Quality Indicators) Guidelines 2018
PEFC Chain of Custody Certification Scheme :
- PEFC ST 2002:2013 – Chain of Custody of Forest Based Products – Requirements
Reproductive Technology Accreditation Committee Scheme :
- Code of Practice for Assisted Reproductive Technology Units – October 2017
- Code of Practice for Assisted Reproductive Technology Units – September 2020
- Code of Practise for assisted reproductive technology units – August 2015
- NZS 8181:2007 Fertility Services
- RTAC Code of Practice – March 2014
Responsible Wood Chain of Custody Scheme :
- AS 4707:2014 Chain of custody for forest products
WaterMark Certification Scheme 2016 :
- Terdiri dari banyak standar untuk kategori ini seperti : AS, AS/NZS, ATS, EN, ISO, SA TS, WMTS, WSA. Sehingga tidak kami tampilkan di artikel ini.
WaterMark Certification Scheme Level 1 :
- Terdiri dari banyak standar untuk kategori ini seperti : AS, AS/NZS, ATS, EN, ISO, WMTS, WSA. Sehingga tidak kami tampilkan di artikel ini.
WaterMark Certification Scheme Level 2 :
- Terdiri dari banyak standar untuk kategori ini seperti : AS, AS/NZS, ATS, EN, ISO,SA TS, WMTS, WSA. Sehingga tidak kami tampilkan di artikel ini.
Demikian artikel dari standarku.com mengenai Badan Standar JAS-ANZ.
Mohon saran dari pembaca untuk kelengkapan isi artikel ini, silahkan saran tersebut dapat disampaikan melalui kolom komentar.
Baca artikel lain :
Sumber referensi :