Daftar Standar ISA adalah kumpulan judul standar mengenai otomatisasi industri dari organisasi International Society of Automation.
Artikel ini merupakan lanjutan dari artikel sebelumnya yang berfokus pada daftar standar apa saja yang diterbitkan oleh ISA.
Artikel sebelumnya dari standarku.com dapat dibaca pada link berikut :
Sekilas Organisasi ISA
International Society of Automation (ISA) adalah asosiasi profesional nirlaba yang didirikan pada tahun 1945 untuk menciptakan dunia yang lebih baik melalui otomatisasi.
ISA ditujukan bagi setiap orang yang bekerja, belajar, atau tertarik pada otomatisasi dan kegiatan yang terkait dengannya seperti instrumentasi seperti :
- insinyur,
- teknisi,
- pelaku bisnis,
- pendidik,
- dan siswa.
ISA memajukan kompetensi teknis dengan menghubungkan komunitas otomatisasi untuk mencapai keunggulan operasional.
Organisasi mengembangkan :
- standar global yang digunakan secara luas;
- sertifikasi profesional industri;
- memberikan pendidikan dan pelatihan;
- menerbitkan buku dan artikel teknis;
- menyelenggarakan konferensi dan pameran;
- dan menyediakan program pengembangan jaringan dan karir untuk anggota dan pelanggannya di seluruh dunia.
Pada awalnya, organisasi ini bernama Instrumentation, Systems, and Automation Society.
Kemudian dikenal sebagai Instrument Society of America, namun populer dengan akronim nya yakni ISA dengan ruang lingkup saat ini yang mencakup banyak disiplin ilmu teknik dan rekayasa.
ISA adalah salah satu organisasi profesional terkemuka di dunia yang menetapkan standar dan mendidik profesional industri dalam otomatisasi.
Beberapa teknologi utama yang terlibat dalam hampir semua manufaktur industri adalah 2 bidang ilmu berikut :
- Instrumentation : Instrumentasi,
- Automation : otomatisasi.
Berbagai sistem yang melakukan interaksi secara kompleks membentuk suatu manufaktur industri modern.
Fungsi dari Instrumentasi adalah menyediakan regulasi untuk sistem yang kompleks tersebut, menggunakan berbagai jenis perangkat pengukuran dan kontrol.
Sedangkan fungsi dari Otomasi adalah menyediakan perangkat yang dapat diprogram yang memungkinkan peningkatan fleksibilitas dalam operasi sistem manufaktur yang kompleks tersebut.
Daftar Standar ISA
Dokumen-dokumen yang tercantum di bawah ini adalah dalam urutan:
- American National Standards developed by ISA, disebut ‘ANSI/ISA’
- ISA Standards, disebut ‘ISA’
- ISA Recommended Practices, disebut ‘ISA-RP’
- ISA Technical Reports, disebut ‘ISA-TR’
Untuk membeli dokumen yang tercantum di bawah ini, silakan kunjungi toko online ISA.
Berikut adalah Daftar Standar ISA yang dikutip dari situs resmi isa.org :
- ANSI/ISA-5.1-2009, Instrumentation Symbols and Identification
- ANSI/ISA 5.06.01-2007 – Functional Requirements Documentation for Control Software Applications
- ANSI/ISA-12.00.02-2009, Certificate Standard for AEx Equipment for Hazardous (Classified) Locations
- ANSI/ISA-12.01.01-2013, Definitions and Information Pertaining to Electrical Equipment in Hazardous (Classified) Locations
- ANSI/ISA-12.04.04-2012, Pressurized Enclosures
- ANSI/ISA-12.12.01-2013, Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations
- ANSI/ISA-12.20.01-2009, General Requirements for Electrical Ignition Systems for Internal Combustion Engines in Class I, Division 2 or Zone 2, Hazardous (Classified) Locations
- ANSI/ISA-18.2-2016, Management of Alarm Systems for the Process Industries
- ANSI/ISA-50.00.01-1975 (R2012), Compatibility of Analog Signals for Electronic Industrial Process Instruments
- NSI/ISA-62443-1-1 (99.01.01)-2007, Security for Industrial Automation and Control Systems – Part 1-1: Terminology, Concepts, and Models
- ANSI/ISA-62443-2-1 (99.02.01)-2009, Security for Industrial Automation and Control Systems – Part 2-1: Establishing an Industrial Automation and Control Systems Security Program
- ANSI/ISA-62443-3-2-2020, Security for industrial automation and control systems – Part 3 2: Security risk assessment for system design
- ANSI/ISA-62443-3-3 (99.03.03)-2013, Security for industrial automation and control systems – Part 3-3: System security requirements and security levels
- NSI/ISA-62443-4-1-2018, Security for industrial automation and control systems – Part 4-1: Secure product development lifecycle requirements
- ANSI/ISA-62443-4-2-2018, Security for industrial automation and control systems – Part 4-2: Technical security requirements for IACS components
- ANSI/ISA-67.04.01-2006, (R2011), Setpoints for Nuclear Safety-Related Instrumentation
- ANSI/ISA-71.04-2013, Environmental Conditions for Process Measurement and Control Systems: Airborne Contaminants
- ANSI/ISA-75.05.01-2000, (R2005), Control Valve Terminology
- ANSI/ISA-75.08.01-2002, (R2007), Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125, 150, 250, 300, and 600)
- ANSI/ISA-75.08.02-2003, (R2009), Face-to-Face Dimensions for Flanged and Flangeless Rotary Control Valves (Classes 150, 300, and 600)
- ANSI/ISA-75.08.03-2001, (R2013), Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500)
- ANSI/ISA-75.08.04-2001, (R2013), Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Class 4500)
- ANSI/ISA-75.08.05-2002, (R2007), Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Class 150, 300, 600, 900, 1500, and 2500)
- ANSI/ISA-75.08.06-2002, (R2013), Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500, and 2500)
- ANSI/ISA-75.08.07-2001, (R2013), Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300, and 600)
- ANSI/ISA-75.08.08-1999, (R2007) Face-to-Centerline Dimensions for Flanged Globe-Style Angle Control Valve Bodies (Classes 150, 300, and 600)
- ANSI/ISA-75.08.09-2005, (R2010), Face-to-Face Dimensions for Sliding Stem Flangeless Control Valves (Classes 150, 300, and 600)
- ANSI/ISA-75.10.01-2013, General Requirements for Clamp or Pinch Valves
- ANSI/ISA-75.10.02-2014, Installed Face-to-Face Dimensions for Dual Pinch Flanged Clamp or Pinch Valves (Classes 125 and 150)
- ANSI/ISA-75.11.01-2013, Inherent Flow Characteristic and Rangeability of Control Valves
- ANSI/ISA-75.13.01-2013, Method of Evaluating the Performance of Positioners with Analog Input Signals and Pneumatic Output
- ANSI/ISA-75.19.01-2013, Hydrostatic Testing of Control Valves
- ANSI/ISA-75.25.01-2000, (R2010), Test Procedure for Control Valve Response Measurement from Step Inputs
- ANSI/ISA-75.26.01-2006, Control Valve Diagnostic Data Acquisition and Reporting
- ANSI/ISA-76.00.02-2002, Modular Component Interfaces for Surface-Mount Fluid Distribution Components – Part 1: Elastomeric Seals
- ANSI/ISA-77.13.01-1999 (R2008) Fossil Fuel Power Plant Steam Turbine Bypass System
- ANSI/ISA-77.14.01-2010, Fossil Fuel Power Plant Steam Turbine Controls
- ANSI/ISA-77.20.01-2012, Fossil Fuel Power Plant Simulators – Functional Requirements
- ANSI/ISA-77.41.01-2010, Fossil Fuel Power Plant Boiler Combustion Controls
- ANSI/ISA-77.42.01-1999,(R2011) Fossil Fuel Power Plant Feedwater Control System – Drum Type
- ANSI/ISA-77.43.01-2002,(R2008) Fossil Fuel Power Plant Unit
- ANSI/ISA-TR77.70.01-2010, (R2015) Tracking and Reporting of Instrument and Control Data
- ANSI/ISA-77.70.02-1994, (R2010) Fossil Fuel Power Plant Instrument Piping Installation
- ANSI/ISA-77.82.01-2019, Selective Catalytic Reduction (SCR) Control Systems
- ANSI/ISA-84.91.01-2021, Identification and Mechanical Integrity of Process Safety Controls, Alarms, and Interlocks in the Process Industry Sector
- ANSI/ISA-88.00.01-2010, Batch Control Part 1: Models and Terminology
- ANSI/ISA-88.00.04-2006, Batch Control Part 4: Batch Production Records
- ANSI/ISA-92.00.01-2010, Performance Requirements for Toxic Gas Detectors
- ANSI/ISA-92.00.02-2013, Installation, Operation, and Maintenance of Toxic Gas-Detection Instruments
- ANSI/ISA-92.04.01, Part I-2007 (R2013), Performance Requirements for Instruments Used To Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres
- ANSI/ISA-95.00.01-2010 (IEC 62264-1 Mod), Enterprise-Control System Integration − Part 1: Models and Terminology
- ANSI/ISA-95.00.02-2018, Enterprise-Control System Integration – Part 2: Objects and Attributes for Enterprise-Control System Integration
- ANSI/ISA-95.00.03-2013 (IEC 62264-3 Modified) Enterprise-Control System Integration − Part 3: Activity Models of Manufacturing Operations Management
- ANSI/ISA-95.00.04-2012, Enterprise-Control System Integration – Part 4: Objects and attributes for manufacturing operations management integration
- ANSI/ISA-95.00.05-2013, Enterprise-Control System Integration – Part 5: Business-to-Manufacturing Transactions
- ANSI/ISA-95.00.06-2014, Enterprise-Control System Integration − Part 6: Messaging Service Model
- ANSI/ISA-95.00.07-2017, Enterprise-Control System Integration – Part 7: Alias Service Model
- ANSI/ISA-95.00.08-2020, Enterprise-Control System Integration – Part 8: Information Exchange Profiles
- ANSI/ISA-96.02.01-2007, Guidelines for the Specification of Electric Valve Actuators
- ANSI/ISA-96.03.01-2012, Guidelines for the Specification of Heavy Duty Pneumatically Powered Quarter Turn Valve Actuators
- ANSI/ISA-96.03.03-2013, Guidelines for the Specification of Pneumatic Vane Type Valve Actuators
- ANSI/ISA-96.06.01-2014, Guidelines for the Specification of Self Contained Electro-Hydraulic Valve Actuators
- ANSI/ISA-100.11a-2011, Wireless systems for industrial automation: Process control and related applications
- ANSI/ISA-101.01-2015, Human Machine Interfaces for Process Automation Systems
- ANSI/ISA-107.1-2013, Industry Standard File Format for Revolution-Based\, Tip Timing Data
- NSI/ISA-TR12.12.04-2011 (formerly ISA-TR12.06.01-1999), Electrical Equipment in a Class I, Division 2/Zone 2 Hazardous Location
- ANSI/ISA-TR12.13.01-1999 (R2013), Flammability Characteristics of Combustible Gases and Vapors
- ANSI/ISA-TR12.13.02-1999 (R2013), Investigation of Fire and Explosion Accidents in the Chemical, Mining, and Fuel-Related Industries – A Manual by Kuchta
- ANSI/ISA-TR12.13.03-2009, Guide for Combustible Gas Detection as a Method of Protection
- ANSI/ISA-TR75.25.02-2000 (R2010), Control Valve Response Measurement from Step Inputs
- ANSI/ISA-TR92.06.03-2008 (R2013), Feasibility of Chlorine Detection Instrument Testing
- ISA-TR96.05.01-2017, Partial Stroke Testing of Automated Valves
- ANSI/ISA-TR99.00.01-2007, Security Technologies for Industrial Automation and Control Systems
- ANSI/ISA-TR104.00.03-2010, EDDL: Meeting the requirements for integrating fieldbus devices in engineering tools for field devices
- ISA-5.2-1976 (R1992), Binary Logic Diagrams For Process Operations
- ISA-5.3-1983, Graphic Symbols for Distributed Control/Shared Display Instrumentation, Logic, and Computer Systems
- ISA-5.4-1991, Instrument Loop Diagrams
- ISA-5.5-1985, Graphic Symbols for Process Displays
- ISA-7.0.01-1996, Quality Standard for Instrument Air
- ISA12.10-1988, Area Classification in Hazardous (Classified) Dust Locations
- ISA-18.1-1979 (R2004), Annunciator Sequences and Specifications
- ISA-20-1981, Specification Forms for Process Measurement and Control Instruments, Primary Elements, and Control Valves
- ISA-20.00.03-2001, Specification Forms for Process Measurement and Control Instruments Part 3: Form Requirements and Development Guidelines
- ISA-37.1-1975 (R1982), Electrical Transducer Nomenclature and Terminology
- ISA-37.3-1982 (R1995), Specifications and Tests for Strain Gage Pressure Transducers
- ISA-37.5-1982 (R1995), Specifications and Tests for Strain Gage Linear Acceleration Transducers
- ISA-37.6-1982 (R1995), Specifications and Tests for Potentiometric Pressure Transducers
- ISA-37.8-1982 (R1995), Specifications and Tests for Strain Gage Force Transducers (Specifications and Tests for Strain Gage Force Transducers
- ISA-37.10-1982 (R1995), Specifications and Tests for Piezoelectric Pressure and Sound-Pressure Transducers
- ISA-37.12-1982 (R1995), Specifications and Tests for Potentiometric Displacement Transducers
- ISA-37.16.01-2002, A Guide for the Dynamic Calibration of Pressure Transducers
- ISA-51.1-1979 (R1993), Process Instrumentation Terminology
- ISA-67.01.01-2002 (R2007), Transducer and Transmitter Installation for Nuclear Safety Applications
- ISA-67.02.01-1999, Nuclear Safety-Related Instrument Sensing Line Piping and Tubing Standard for Use in Nuclear Power Plants
- ISA-67.06.01-2002, Performance Monitoring for Nuclear Safety-Related Instrument Channels in Nuclear Power Plants
- ISA-67.14.01-2000, Qualifications and Certification of Instrumentation and Control Technicians in Nuclear Facilities
- ISA-71.01-1985, Environmental Conditions for Process Measurement and Control Systems: Temperature and Humidity
- ISA-71.02-1991, Environmental Conditions for Process Measurement and Control Systems: Power
- ISA-71.03-1995, Environmental Conditions for Process Measurement and Control Systems: Mechanical Influences
- ISA-75.07-1997, Laboratory Measurement of Aerodynamic Noise Generated by Control Valves
- ISA-75.17-1989, Control Valve Aerodynamic Noise Prediction
- ISA-82.03-1988, Safety Standard for Electrical and Electronic Test, Measuring, Controlling, and Related Equipment
- ISA-88.00.02-2001, Batch Control Part 2: Data Structures and Guidelines for Languages
- ISA-88.00.03-2003, Batch Control Part 3: General and Site Recipe Models and Representation
- ISA-RP2.1-1978, Manometer Tables
- ISA-RP12.2.02-1996, Recommendations for the Preparation, Content, and Organization of Intrinsic Safety Control Drawings
- ISA-RP12.06.01-2003, Recommended Practice for Wiring Methods for Hazardous (Classified) Locations Instrumentation Part 1: Intrinsic Safety
- ISA-RP31.1-1977, Specification, Installation, and Calibration of Turbine Flowmeters
- ISA-RP37.2-1982 (R1995), Guide for Specifications and Tests for Piezoelectric Acceleration Transducers for Aerospace Testing
- ISA-RP42.00.01-2001, Nomenclature for Instrument Tube Fittings
- ISA-RP60.1-1990, Control Center Facilities
- ISA-RP60.2-1995, Control Center Design Guide and Terminology
- ISA-RP60.3-1985, Human Engineering for Control Centers
- ISA-RP60.4-1990, Documentation for Control Centers
- ISA-RP60.6-1984, Nameplates, Labels, and Tags for Control Centers
- ISA-RP60.8,1978, Electrical Guide for Control Centers
- ISA-RP60.9-1981, Piping Guide for Control Centers
- ISA-RP60.11-1991, Crating, Shipping, and Handling for Control Centers
- ISA-RP67.04.02-2010, Methodologies for the Determination of Setpoints for Nuclear Safety-Related Instrumentation
- ISA-RP74.01-1984, Application and Installation of Continuous-Belt Weighbridge Scales
- ISA-RP75.23-1995, Considerations for Evaluating Control Valve Cavitation
- ISA-RP76.0.01-1998, Analyzer System Inspection and Acceptance
- ISA-RP77.60.02-2010, Fossil Fuel Power Plant Human-Machine Interface: Hard Panel Alarms
- ISA-RP77.60.05-2001 (R2012), Fossil Fuel Power Plant Human-Machine Interface: Task Analysis
- ISA-RP92.04.02, Part II-1996 (R2013), Installation, Operation, and Maintenance of Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres
- ISA-RP105.00.01-2017, Management of a Calibration Program for Industrial Automation and Control Systems
- ISA-TR5.1.01/ISA-TR77.40.01-2012, Functional Diagram Usage
- ISA-TR12.2-1995, Intrinsically Safe System Assessment Using the Entity Concept
- ISA-TR18.2.1-2018, Alarm Philosophy
- ISA-TR18.2.2-2016, Alarm Identification and Rationalization
- ISA-TR18.2.3-2015, Basic Alarm Design
- ISA-TR18.2.4-2012, Enhanced and Advanced Alarm Methods
- ISA-TR18.2.5-2012, Alarm System Monitoring, Assessment, and Auditing
- ISA-TR18.2.6-2012, Alarm Systems for Batch and Discrete Processes
- ISA-TR18.2.7-2017, Alarm Management When Utilizing Packaged Systems
- ISA-TR20.00.01-2007, Specification Forms for Process Measurement and Control Instruments Part 1: General Considerations-Updated with 27 new specification forms in 2004-2006 and updated with 11 new specification forms in 2007
- ISA-TR50.02-Parts 3 & 4-2000, Fieldbus Standard for Use in Industrial Control Systems, Parts 3 & 4: Technical Report for Fieldbus Data Link Layer — Tutorial
- ISA–TR50.02, Part 9–2000, Fieldbus Standard for Use in Industrial Control Systems: User Layer Technical Report
- ISA-TR52.00.01-2006, Recommended Environments for Standards Laboratories
- ISA-TR62443-2-3, Security for Industrial Automation and Control Systems, Part 2-3: Patch management in the IACS environment
- ISA-TR67.04.08-1996, Setpoints for Sequenced Actions
- ISA-TR67.04.09-2005, Graded Approaches to Setpoint Determination
- ISA-TR75.04.01-1998, (R2006), Control Valve Position Stability
- ISA-TR77.42.02-2009, Fossil Fuel Power Plant Compensated Differential Pressure Based Drum Level Measurement
- ISA-TR77.60.04-2013, Fossil Fuel Power Plant Human-Machine Interface – Electronic Screen Displays
- ISA-TR84.00.02-2015, Verification of Safety Instrumented Functions
- ISA-TR84.00.03-2019, Automation Asset Integrity of Safety Instrumented Systems (SIS)
- ISA-TR84.00.04-2020, Part 1, Guidelines for the Implementation of ANSI/ISA-61511-1-2018
- ISA-TR84.00.04-2005 Part 2: Example Implementation of ANSI/ISA-84.00.01-2004 (IEC 61511 Mod)
- ISA-TR84.00.05-2009, Guidance on the Identification of Safety Instrumented Functions (SIF) in Burner Management Systems (BMS)
- ISA-TR84.00.07-2018, Guidance on the Evaluation of Fire, Combustible Gas, and Toxic Gas System Effectiveness
- ISA-TR84.00.08-2017, Guidance for Application of Wireless Sensor Technology to Non-SIS Independent Protection Layers
- ISA-TR84.00.09-2017, Cybersecurity Related to the Functional Safety Lifecycle
- ANSI/ISA-TR88.00.02-2015, A Technical Report prepared by ISA and registered with ANSI Machine and Unit States: An implementation example of ANSI/ISA-88.00.01
- ISA-TR88.0.03-1996, Possible Recipe Procedure Presentation Formats
- ISA-TR-88.95.01-2008, Using ISA-88 and ISA-95 Together
- ISA-TR91.00.02-2003, Criticality Classification Guideline for Instrumentation
- ISA-TR100.00.01-2006, The Automation Engineer’s Guide to Wireless Technology Part 1 : The Physics of Radio, a Tutorial
- ISA-TR100.00.02-2009, The Automation Engineer’s Guide to Wireless Technology: Part 2 – A Review of Technologies for Industrial Asset Tracking
- ISA-TR100.00.03-2011, Wireless User Requirements for Factory Automation
- ISA-TR100.14.01-Part 1-2011, Trustworthiness in Wireless Industrial Automation: Part 1, Information for End Users and Regulators
- ISA-TR100.15.01-2012, Backhaul Architecture Model: Secured Connectivity over Untrusted or Trusted Networks
- ISA-TR101.02-2019, HMI Usability and Performance
- ISA-TR106.00.01-2013, Procedure Automation for Continuous Process Operations – Models and Terminology
- ISA-TR106.00.02-2017, Procedure Automation for Continuous Process Operations – Work Processes
Daftar Standar dari ISA ini dikutip dari situs isa.org per tanggal 1 Oktober 2021, apabila ada perbedaan isi maka pembaca harus mengikuti isi web isa.org.
Demikian artikel dari standarku.com mengenai Daftar Standar ISA untuk otomatisasi industri.
Mohon saran dari pembaca untuk kelengkapan isi artikel ini, silahkan saran tersebut dapat disampaikan melalui kolom komentar.
Baca artikel lain :
- Standar welding dari AWS untuk pengelasan
- Standar AMCA untuk HVAC
- Standar AHAM untuk peralatan rumah tangga
- Daftar Standar Gratis SDO IBR
- Mengenal Standar Toyota Way
- Tesla Way, Metode Standar Inovasi terbaru
Sumber referensi :